igb/ixgbe/e1000e: resolve tx multiqueue bug

With the recent changes to tx mutiqueue, igb/ixgbe/e1000e was not calling
netif_tx_start_all_queues() before calling netif_tx_wake_all_queues().
This causes an issue during loading of the driver.

In addition, updated e1000e to use the updated tx mutliqueue api.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/e1000e/netdev.c

@@ -2513,7 +2513,7 @@ void e1000e_down(struct e1000_adapter *adapter)
 	ew32(RCTL, rctl & ~E1000_RCTL_EN);
 	/* flush and sleep below */
 
-	netif_stop_queue(netdev);
+	netif_tx_stop_all_queues(netdev);
 
 	/* disable transmits in the hardware */
 	tctl = er32(TCTL);
@@ -2663,6 +2663,8 @@ static int e1000_open(struct net_device *netdev)
 
 	e1000_irq_enable(adapter);
 
+	netif_tx_start_all_queues(netdev);
+
 	/* fire a link status change interrupt to start the watchdog */
 	ew32(ICS, E1000_ICS_LSC);
 
@@ -3118,7 +3120,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			ew32(TCTL, tctl);
 
 			netif_carrier_on(netdev);
-			netif_wake_queue(netdev);
+			netif_tx_wake_all_queues(netdev);
 
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
@@ -3130,7 +3132,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			adapter->link_duplex = 0;
 			ndev_info(netdev, "Link is Down\n");
 			netif_carrier_off(netdev);
-			netif_stop_queue(netdev);
+			netif_tx_stop_all_queues(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
 					  round_jiffies(jiffies + 2 * HZ));
@@ -4504,7 +4506,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	/* tell the stack to leave us alone until e1000_open() is called */
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
+	netif_tx_stop_all_queues(netdev);
 
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);

drivers/net/igb/igb_main.c

@@ -1493,6 +1493,8 @@ static int igb_open(struct net_device *netdev)
 
 	igb_irq_enable(adapter);
 
+	netif_tx_start_all_queues(netdev);
+
 	/* Fire a link status change interrupt to start the watchdog. */
 	wr32(E1000_ICS, E1000_ICS_LSC);
 

drivers/net/ixgbe/ixgbe_main.c

@@ -2765,6 +2765,8 @@ static int ixgbe_open(struct net_device *netdev)
 	if (err)
 		goto err_up;
 
+	netif_tx_start_all_queues(netdev);
+
 	return 0;
 
 err_up: