提交 d4659912 编写于 作者: F Felix Fietkau 提交者: John W. Linville

ath9k_hw: remove enum wireless_mode and its users

The wireless mode bitfield was only used to detect 2.4 and 5 GHz support,
which can be simplified by using ATH9K_HW_CAP_* capabilities.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 4e990018
......@@ -566,7 +566,7 @@ static void ath9k_init_crypto(struct ath9k_htc_priv *priv)
static void ath9k_init_channels_rates(struct ath9k_htc_priv *priv)
{
if (test_bit(ATH9K_MODE_11G, priv->ah->caps.wireless_modes)) {
if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) {
priv->sbands[IEEE80211_BAND_2GHZ].channels =
ath9k_2ghz_channels;
priv->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
......@@ -577,7 +577,7 @@ static void ath9k_init_channels_rates(struct ath9k_htc_priv *priv)
ARRAY_SIZE(ath9k_legacy_rates);
}
if (test_bit(ATH9K_MODE_11A, priv->ah->caps.wireless_modes)) {
if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) {
priv->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_channels;
priv->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
priv->sbands[IEEE80211_BAND_5GHZ].n_channels =
......@@ -740,18 +740,18 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
hw->extra_tx_headroom = sizeof(struct tx_frame_hdr) +
sizeof(struct htc_frame_hdr) + 4;
if (test_bit(ATH9K_MODE_11G, priv->ah->caps.wireless_modes))
if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->sbands[IEEE80211_BAND_2GHZ];
if (test_bit(ATH9K_MODE_11A, priv->ah->caps.wireless_modes))
if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&priv->sbands[IEEE80211_BAND_5GHZ];
if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
if (test_bit(ATH9K_MODE_11G, priv->ah->caps.wireless_modes))
if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
setup_ht_cap(priv,
&priv->sbands[IEEE80211_BAND_2GHZ].ht_cap);
if (test_bit(ATH9K_MODE_11A, priv->ah->caps.wireless_modes))
if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
setup_ht_cap(priv,
&priv->sbands[IEEE80211_BAND_5GHZ].ht_cap);
}
......
......@@ -1800,37 +1800,11 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
return -EINVAL;
}
bitmap_zero(pCap->wireless_modes, ATH9K_MODE_MAX);
if (eeval & AR5416_OPFLAGS_11A) {
set_bit(ATH9K_MODE_11A, pCap->wireless_modes);
if (ah->config.ht_enable) {
if (!(eeval & AR5416_OPFLAGS_N_5G_HT20))
set_bit(ATH9K_MODE_11NA_HT20,
pCap->wireless_modes);
if (!(eeval & AR5416_OPFLAGS_N_5G_HT40)) {
set_bit(ATH9K_MODE_11NA_HT40PLUS,
pCap->wireless_modes);
set_bit(ATH9K_MODE_11NA_HT40MINUS,
pCap->wireless_modes);
}
}
}
if (eeval & AR5416_OPFLAGS_11A)
pCap->hw_caps |= ATH9K_HW_CAP_5GHZ;
if (eeval & AR5416_OPFLAGS_11G) {
set_bit(ATH9K_MODE_11G, pCap->wireless_modes);
if (ah->config.ht_enable) {
if (!(eeval & AR5416_OPFLAGS_N_2G_HT20))
set_bit(ATH9K_MODE_11NG_HT20,
pCap->wireless_modes);
if (!(eeval & AR5416_OPFLAGS_N_2G_HT40)) {
set_bit(ATH9K_MODE_11NG_HT40PLUS,
pCap->wireless_modes);
set_bit(ATH9K_MODE_11NG_HT40MINUS,
pCap->wireless_modes);
}
}
}
if (eeval & AR5416_OPFLAGS_11G)
pCap->hw_caps |= ATH9K_HW_CAP_2GHZ;
pCap->tx_chainmask = ah->eep_ops->get_eeprom(ah, EEP_TX_MASK);
/*
......
......@@ -164,18 +164,6 @@ enum ath_ini_subsys {
ATH_INI_NUM_SPLIT,
};
enum wireless_mode {
ATH9K_MODE_11A = 0,
ATH9K_MODE_11G,
ATH9K_MODE_11NA_HT20,
ATH9K_MODE_11NG_HT20,
ATH9K_MODE_11NA_HT40PLUS,
ATH9K_MODE_11NA_HT40MINUS,
ATH9K_MODE_11NG_HT40PLUS,
ATH9K_MODE_11NG_HT40MINUS,
ATH9K_MODE_MAX,
};
enum ath9k_hw_caps {
ATH9K_HW_CAP_HT = BIT(0),
ATH9K_HW_CAP_RFSILENT = BIT(1),
......@@ -190,11 +178,12 @@ enum ath9k_hw_caps {
ATH9K_HW_CAP_SGI_20 = BIT(10),
ATH9K_HW_CAP_PAPRD = BIT(11),
ATH9K_HW_CAP_ANT_DIV_COMB = BIT(12),
ATH9K_HW_CAP_2GHZ = BIT(13),
ATH9K_HW_CAP_5GHZ = BIT(14),
};
struct ath9k_hw_capabilities {
u32 hw_caps; /* ATH9K_HW_CAP_* from ath9k_hw_caps */
DECLARE_BITMAP(wireless_modes, ATH9K_MODE_MAX); /* ATH9K_MODE_* */
u16 total_queues;
u16 keycache_size;
u16 low_5ghz_chan, high_5ghz_chan;
......
......@@ -485,7 +485,7 @@ static int ath9k_init_channels_rates(struct ath_softc *sc)
ARRAY_SIZE(ath9k_5ghz_chantable) !=
ATH9K_NUM_CHANNELS);
if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) {
channels = kmemdup(ath9k_2ghz_chantable,
sizeof(ath9k_2ghz_chantable), GFP_KERNEL);
if (!channels)
......@@ -500,7 +500,7 @@ static int ath9k_init_channels_rates(struct ath_softc *sc)
ARRAY_SIZE(ath9k_legacy_rates);
}
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) {
channels = kmemdup(ath9k_5ghz_chantable,
sizeof(ath9k_5ghz_chantable), GFP_KERNEL);
if (!channels) {
......@@ -681,17 +681,17 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->rate_control_algorithm = "ath9k_rate_control";
#endif
if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&sc->sbands[IEEE80211_BAND_2GHZ];
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&sc->sbands[IEEE80211_BAND_5GHZ];
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
}
......
......@@ -378,17 +378,6 @@ static const struct ath_rate_table ar5416_11g_ratetable = {
0, /* Phy rates allowed initially */
};
static const struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX] = {
[ATH9K_MODE_11A] = &ar5416_11a_ratetable,
[ATH9K_MODE_11G] = &ar5416_11g_ratetable,
[ATH9K_MODE_11NA_HT20] = &ar5416_11na_ratetable,
[ATH9K_MODE_11NG_HT20] = &ar5416_11ng_ratetable,
[ATH9K_MODE_11NA_HT40PLUS] = &ar5416_11na_ratetable,
[ATH9K_MODE_11NA_HT40MINUS] = &ar5416_11na_ratetable,
[ATH9K_MODE_11NG_HT40PLUS] = &ar5416_11ng_ratetable,
[ATH9K_MODE_11NG_HT40MINUS] = &ar5416_11ng_ratetable,
};
static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
struct ieee80211_tx_rate *rate);
......@@ -1200,38 +1189,23 @@ static void ath_rc_tx_status(struct ath_softc *sc,
static const
struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
enum ieee80211_band band,
bool is_ht,
bool is_cw_40)
bool is_ht)
{
int mode = 0;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
switch(band) {
case IEEE80211_BAND_2GHZ:
mode = ATH9K_MODE_11G;
if (is_ht)
mode = ATH9K_MODE_11NG_HT20;
if (is_cw_40)
mode = ATH9K_MODE_11NG_HT40PLUS;
break;
return &ar5416_11ng_ratetable;
return &ar5416_11g_ratetable;
case IEEE80211_BAND_5GHZ:
mode = ATH9K_MODE_11A;
if (is_ht)
mode = ATH9K_MODE_11NA_HT20;
if (is_cw_40)
mode = ATH9K_MODE_11NA_HT40PLUS;
break;
return &ar5416_11na_ratetable;
return &ar5416_11a_ratetable;
default:
ath_print(common, ATH_DBG_CONFIG, "Invalid band\n");
return NULL;
}
BUG_ON(mode >= ATH9K_MODE_MAX);
ath_print(common, ATH_DBG_CONFIG,
"Choosing rate table for mode: %d\n", mode);
return hw_rate_table[mode];
}
static void ath_rc_init(struct ath_softc *sc,
......@@ -1480,7 +1454,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
/* Choose rate table first */
rate_table = ath_choose_rate_table(sc, sband->band,
sta->ht_cap.ht_supported, is_cw40);
sta->ht_cap.ht_supported);
ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta, is_cw40, is_sgi);
ath_rc_init(sc, priv_sta, sband, sta, rate_table);
......@@ -1520,8 +1494,7 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
if ((local_cw40 != oper_cw40) || (local_sgi != oper_sgi)) {
rate_table = ath_choose_rate_table(sc, sband->band,
sta->ht_cap.ht_supported,
oper_cw40);
sta->ht_cap.ht_supported);
ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta,
oper_cw40, oper_sgi);
ath_rc_init(sc, priv_sta, sband, sta, rate_table);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册