powerpc/powernv: Move cpuidle related code from setup.c to new file

This is a cleanup patch; doesn't change any functionality. Moves
all cpuidle related code from setup.c to a new file.
Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
[mpe: Fix the SMP=n build by including asm/smp.h in idle.c]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

arch/powerpc/platforms/powernv/Makefile

-obj-y			+= setup.o opal-wrappers.o opal.o opal-async.o
+obj-y			+= setup.o opal-wrappers.o opal.o opal-async.o idle.o
 obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
 obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
 obj-y			+= opal-msglog.o opal-hmi.o opal-power.o

arch/powerpc/platforms/powernv/idle.c

+/*
+ * PowerNV cpuidle code
+ *
+ * Copyright 2015 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <asm/firmware.h>
+#include <asm/opal.h>
+#include <asm/cputhreads.h>
+#include <asm/cpuidle.h>
+#include <asm/code-patching.h>
+#include <asm/smp.h>
+
+#include "powernv.h"
+#include "subcore.h"
+
+static u32 supported_cpuidle_states;
+
+int pnv_save_sprs_for_winkle(void)
+{
+	int cpu;
+	int rc;
+
+	/*
+	 * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric accross
+	 * all cpus at boot. Get these reg values of current cpu and use the
+	 * same accross all cpus.
+	 */
+	uint64_t lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
+	uint64_t hid0_val = mfspr(SPRN_HID0);
+	uint64_t hid1_val = mfspr(SPRN_HID1);
+	uint64_t hid4_val = mfspr(SPRN_HID4);
+	uint64_t hid5_val = mfspr(SPRN_HID5);
+	uint64_t hmeer_val = mfspr(SPRN_HMEER);
+
+	for_each_possible_cpu(cpu) {
+		uint64_t pir = get_hard_smp_processor_id(cpu);
+		uint64_t hsprg0_val = (uint64_t)&paca[cpu];
+
+		/*
+		 * HSPRG0 is used to store the cpu's pointer to paca. Hence last
+		 * 3 bits are guaranteed to be 0. Program slw to restore HSPRG0
+		 * with 63rd bit set, so that when a thread wakes up at 0x100 we
+		 * can use this bit to distinguish between fastsleep and
+		 * deep winkle.
+		 */
+		hsprg0_val |= 1;
+
+		rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
+		if (rc != 0)
+			return rc;
+
+		rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
+		if (rc != 0)
+			return rc;
+
+		/* HIDs are per core registers */
+		if (cpu_thread_in_core(cpu) == 0) {
+
+			rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
+			if (rc != 0)
+				return rc;
+
+			rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
+			if (rc != 0)
+				return rc;
+
+			rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
+			if (rc != 0)
+				return rc;
+
+			rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
+			if (rc != 0)
+				return rc;
+
+			rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
+			if (rc != 0)
+				return rc;
+		}
+	}
+
+	return 0;
+}
+
+static void pnv_alloc_idle_core_states(void)
+{
+	int i, j;
+	int nr_cores = cpu_nr_cores();
+	u32 *core_idle_state;
+
+	/*
+	 * core_idle_state - First 8 bits track the idle state of each thread
+	 * of the core. The 8th bit is the lock bit. Initially all thread bits
+	 * are set. They are cleared when the thread enters deep idle state
+	 * like sleep and winkle. Initially the lock bit is cleared.
+	 * The lock bit has 2 purposes
+	 * a. While the first thread is restoring core state, it prevents
+	 * other threads in the core from switching to process context.
+	 * b. While the last thread in the core is saving the core state, it
+	 * prevents a different thread from waking up.
+	 */
+	for (i = 0; i < nr_cores; i++) {
+		int first_cpu = i * threads_per_core;
+		int node = cpu_to_node(first_cpu);
+
+		core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node);
+		*core_idle_state = PNV_CORE_IDLE_THREAD_BITS;
+
+		for (j = 0; j < threads_per_core; j++) {
+			int cpu = first_cpu + j;
+
+			paca[cpu].core_idle_state_ptr = core_idle_state;
+			paca[cpu].thread_idle_state = PNV_THREAD_RUNNING;
+			paca[cpu].thread_mask = 1 << j;
+		}
+	}
+
+	update_subcore_sibling_mask();
+
+	if (supported_cpuidle_states & OPAL_PM_WINKLE_ENABLED)
+		pnv_save_sprs_for_winkle();
+}
+
+u32 pnv_get_supported_cpuidle_states(void)
+{
+	return supported_cpuidle_states;
+}
+EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states);
+
+static int __init pnv_init_idle_states(void)
+{
+	struct device_node *power_mgt;
+	int dt_idle_states;
+	u32 *flags;
+	int i;
+
+	supported_cpuidle_states = 0;
+
+	if (cpuidle_disable != IDLE_NO_OVERRIDE)
+		goto out;
+
+	if (!firmware_has_feature(FW_FEATURE_OPALv3))
+		goto out;
+
+	power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
+	if (!power_mgt) {
+		pr_warn("opal: PowerMgmt Node not found\n");
+		goto out;
+	}
+	dt_idle_states = of_property_count_u32_elems(power_mgt,
+			"ibm,cpu-idle-state-flags");
+	if (dt_idle_states < 0) {
+		pr_warn("cpuidle-powernv: no idle states found in the DT\n");
+		goto out;
+	}
+
+	flags = kzalloc(sizeof(*flags) * dt_idle_states, GFP_KERNEL);
+	if (of_property_read_u32_array(power_mgt,
+			"ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
+		pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
+		goto out_free;
+	}
+
+	for (i = 0; i < dt_idle_states; i++)
+		supported_cpuidle_states |= flags[i];
+
+	if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
+		patch_instruction(
+			(unsigned int *)pnv_fastsleep_workaround_at_entry,
+			PPC_INST_NOP);
+		patch_instruction(
+			(unsigned int *)pnv_fastsleep_workaround_at_exit,
+			PPC_INST_NOP);
+	}
+	pnv_alloc_idle_core_states();
+out_free:
+	kfree(flags);
+out:
+	return 0;
+}
+
+subsys_initcall(pnv_init_idle_states);

arch/powerpc/platforms/powernv/setup.c

@@ -35,12 +35,8 @@
 #include <asm/opal.h>
 #include <asm/kexec.h>
 #include <asm/smp.h>
-#include <asm/cputhreads.h>
-#include <asm/cpuidle.h>
-#include <asm/code-patching.h>
 
 #include "powernv.h"
-#include "subcore.h"
 
 static void __init pnv_setup_arch(void)
 {
@@ -277,173 +273,6 @@ static void __init pnv_setup_machdep_opal(void)
 	ppc_md.handle_hmi_exception = opal_handle_hmi_exception;
 }
 
-static u32 supported_cpuidle_states;
-
-int pnv_save_sprs_for_winkle(void)
-{
-	int cpu;
-	int rc;
-
-	/*
-	 * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric accross
-	 * all cpus at boot. Get these reg values of current cpu and use the
-	 * same accross all cpus.
-	 */
-	uint64_t lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
-	uint64_t hid0_val = mfspr(SPRN_HID0);
-	uint64_t hid1_val = mfspr(SPRN_HID1);
-	uint64_t hid4_val = mfspr(SPRN_HID4);
-	uint64_t hid5_val = mfspr(SPRN_HID5);
-	uint64_t hmeer_val = mfspr(SPRN_HMEER);
-
-	for_each_possible_cpu(cpu) {
-		uint64_t pir = get_hard_smp_processor_id(cpu);
-		uint64_t hsprg0_val = (uint64_t)&paca[cpu];
-
-		/*
-		 * HSPRG0 is used to store the cpu's pointer to paca. Hence last
-		 * 3 bits are guaranteed to be 0. Program slw to restore HSPRG0
-		 * with 63rd bit set, so that when a thread wakes up at 0x100 we
-		 * can use this bit to distinguish between fastsleep and
-		 * deep winkle.
-		 */
-		hsprg0_val |= 1;
-
-		rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
-		if (rc != 0)
-			return rc;
-
-		rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
-		if (rc != 0)
-			return rc;
-
-		/* HIDs are per core registers */
-		if (cpu_thread_in_core(cpu) == 0) {
-
-			rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
-			if (rc != 0)
-				return rc;
-
-			rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
-			if (rc != 0)
-				return rc;
-
-			rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
-			if (rc != 0)
-				return rc;
-
-			rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
-			if (rc != 0)
-				return rc;
-
-			rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
-			if (rc != 0)
-				return rc;
-		}
-	}
-
-	return 0;
-}
-
-static void pnv_alloc_idle_core_states(void)
-{
-	int i, j;
-	int nr_cores = cpu_nr_cores();
-	u32 *core_idle_state;
-
-	/*
-	 * core_idle_state - First 8 bits track the idle state of each thread
-	 * of the core. The 8th bit is the lock bit. Initially all thread bits
-	 * are set. They are cleared when the thread enters deep idle state
-	 * like sleep and winkle. Initially the lock bit is cleared.
-	 * The lock bit has 2 purposes
-	 * a. While the first thread is restoring core state, it prevents
-	 * other threads in the core from switching to process context.
-	 * b. While the last thread in the core is saving the core state, it
-	 * prevents a different thread from waking up.
-	 */
-	for (i = 0; i < nr_cores; i++) {
-		int first_cpu = i * threads_per_core;
-		int node = cpu_to_node(first_cpu);
-
-		core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node);
-		*core_idle_state = PNV_CORE_IDLE_THREAD_BITS;
-
-		for (j = 0; j < threads_per_core; j++) {
-			int cpu = first_cpu + j;
-
-			paca[cpu].core_idle_state_ptr = core_idle_state;
-			paca[cpu].thread_idle_state = PNV_THREAD_RUNNING;
-			paca[cpu].thread_mask = 1 << j;
-		}
-	}
-
-	update_subcore_sibling_mask();
-
-	if (supported_cpuidle_states & OPAL_PM_WINKLE_ENABLED)
-		pnv_save_sprs_for_winkle();
-}
-
-u32 pnv_get_supported_cpuidle_states(void)
-{
-	return supported_cpuidle_states;
-}
-EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states);
-
-static int __init pnv_init_idle_states(void)
-{
-	struct device_node *power_mgt;
-	int dt_idle_states;
-	u32 *flags;
-	int i;
-
-	supported_cpuidle_states = 0;
-
-	if (cpuidle_disable != IDLE_NO_OVERRIDE)
-		goto out;
-
-	if (!firmware_has_feature(FW_FEATURE_OPALv3))
-		goto out;
-
-	power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
-	if (!power_mgt) {
-		pr_warn("opal: PowerMgmt Node not found\n");
-		goto out;
-	}
-	dt_idle_states = of_property_count_u32_elems(power_mgt,
-			"ibm,cpu-idle-state-flags");
-	if (dt_idle_states < 0) {
-		pr_warn("cpuidle-powernv: no idle states found in the DT\n");
-		goto out;
-	}
-
-	flags = kzalloc(sizeof(*flags) * dt_idle_states, GFP_KERNEL);
-	if (of_property_read_u32_array(power_mgt,
-			"ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
-		pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
-		goto out_free;
-	}
-
-	for (i = 0; i < dt_idle_states; i++)
-		supported_cpuidle_states |= flags[i];
-
-	if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
-		patch_instruction(
-			(unsigned int *)pnv_fastsleep_workaround_at_entry,
-			PPC_INST_NOP);
-		patch_instruction(
-			(unsigned int *)pnv_fastsleep_workaround_at_exit,
-			PPC_INST_NOP);
-	}
-	pnv_alloc_idle_core_states();
-out_free:
-	kfree(flags);
-out:
-	return 0;
-}
-
-subsys_initcall(pnv_init_idle_states);
-
 static int __init pnv_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();