ASoC: sgtl5000: Use specific variable for lo_vag

This is a preparation for calculating lo_vol which needs both vag
and lo_vag.
Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

sound/soc/codecs/sgtl5000.c

@@ -1111,6 +1111,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
 	u16 ana_pwr;
 	u16 lreg_ctrl;
 	int vag;
+	int lo_vag;
 	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
 
 	vdda  = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
@@ -1198,20 +1199,20 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
 			SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
 
 	/* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
-	vag = vddio / 2;
-	if (vag <= SGTL5000_LINE_OUT_GND_BASE)
-		vag = 0;
-	else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
+	lo_vag = vddio / 2;
+	if (lo_vag <= SGTL5000_LINE_OUT_GND_BASE)
+		lo_vag = 0;
+	else if (lo_vag >= SGTL5000_LINE_OUT_GND_BASE +
 		SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
-		vag = SGTL5000_LINE_OUT_GND_MAX;
+		lo_vag = SGTL5000_LINE_OUT_GND_MAX;
 	else
-		vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
+		lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) /
 		    SGTL5000_LINE_OUT_GND_STP;
 
 	snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
 			SGTL5000_LINE_OUT_CURRENT_MASK |
 			SGTL5000_LINE_OUT_GND_MASK,
-			vag << SGTL5000_LINE_OUT_GND_SHIFT |
+			lo_vag << SGTL5000_LINE_OUT_GND_SHIFT |
 			SGTL5000_LINE_OUT_CURRENT_360u <<
 				SGTL5000_LINE_OUT_CURRENT_SHIFT);