提交 d22b0022 编写于 作者: S Sujith 提交者: John W. Linville

ath9k: Fix lockdep warning

This patch fixes the lockdep warning shown below, and also
initializes the starting sequence number when starting a TX
aggregation session.

 =============================================
 [ INFO: possible recursive locking detected ]
 2.6.29-rc2-wl #21
 ---------------------------------------------
 swapper/0 is trying to acquire lock:
  (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290

 but task is already holding lock:
  (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290

 other info that might help us debug this:
 7 locks held by swapper/0:
  #0:  (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  #1:  (_xmit_ETHER#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  #2:  (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  #3:  (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  #4:  (rcu_read_lock){..--}, at: [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211]
  #5:  (rcu_read_lock){..--}, at: [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211]
  #6:  (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620

 stack backtrace:
 Pid: 0, comm: swapper Not tainted 2.6.29-rc2-wl #21
 Call Trace:
  <IRQ>  [<ffffffff8026c329>] __lock_acquire+0x1be9/0x1c40
  [<ffffffff80442af1>] dev_queue_xmit+0xe1/0x620
  [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40
  [<ffffffff8026c3d5>] lock_acquire+0x55/0x70
  [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  [<ffffffff804dbeb9>] _spin_lock+0x39/0x50
  [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  [<ffffffff804dbd2f>] _spin_unlock+0x1f/0x50
  [<ffffffff80456d71>] __qdisc_run+0x221/0x290
  [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620
  [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  [<ffffffffa0142a63>] ieee80211_start_tx_ba_session+0x303/0x4e0 [mac80211]
  [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211]
  [<ffffffffa0149dae>] rate_control_get_rate+0xae/0xc0 [mac80211]
  [<ffffffffa01526b5>] invoke_tx_handlers+0x655/0x1000 [mac80211]
  [<ffffffff802699fd>] mark_held_locks+0x4d/0x90
  [<ffffffff804dbcf5>] _spin_unlock_irqrestore+0x65/0x80
  [<ffffffffa0151aaa>] __ieee80211_tx_prepare+0x16a/0x310 [mac80211]
  [<ffffffffa0151adc>] __ieee80211_tx_prepare+0x19c/0x310 [mac80211]
  [<ffffffff80439cc2>] pskb_expand_head+0x112/0x190
  [<ffffffffa0154986>] ieee80211_master_start_xmit+0x286/0x6c0 [mac80211]
  [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211]
  [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40
  [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290
  [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620
  [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  [<ffffffffa0154221>] ieee80211_subif_start_xmit+0x4a1/0x980 [mac80211]
  [<ffffffffa0153f18>] ieee80211_subif_start_xmit+0x198/0x980 [mac80211]
  [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290
  [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620
  [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620
  [<ffffffffa028ecfd>] ip6_output+0x62d/0x1230 [ipv6]
  [<ffffffff8024ca00>] __mod_timer+0xb0/0xd0
  [<ffffffffa02ad25a>] mld_sendpack+0x3fa/0x4a0 [ipv6]
  [<ffffffffa02ace60>] mld_sendpack+0x0/0x4a0 [ipv6]
  [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6]
  [<ffffffffa02ae219>] mld_ifc_timer_expire+0x289/0x340 [ipv6]
  [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6]
  [<ffffffff8024c097>] run_timer_softirq+0x147/0x220
  [<ffffffff802473fb>] __do_softirq+0x9b/0x180
  [<ffffffff80265516>] tick_dev_program_event+0x36/0xb0
  [<ffffffff8020d77c>] call_softirq+0x1c/0x30
  [<ffffffff8020f2c5>] do_softirq+0x65/0xb0
  [<ffffffff80246ebd>] irq_exit+0x9d/0xc0
  [<ffffffff80221db6>] smp_apic_timer_interrupt+0x86/0xd0
  [<ffffffff8020d1b3>] apic_timer_interrupt+0x13/0x20
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 0cbe0064
......@@ -1479,6 +1479,20 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
(is_underrun) ? ATH_11N_TXMAXTRY :
tx_info_priv->tx.ts_longretry);
/* Check if aggregation has to be enabled for this tid */
if (conf_is_ht(&sc->hw->conf)) {
if (ieee80211_is_data_qos(fc)) {
u8 *qc, tid;
struct ath_node *an;
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
an = (struct ath_node *)sta->drv_priv;
if(ath_tx_aggr_check(sc, an, tid))
ieee80211_start_tx_ba_session(sc->hw, hdr->addr1, tid);
}
}
exit:
kfree(tx_info_priv);
}
......@@ -1490,7 +1504,6 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
struct sk_buff *skb = txrc->skb;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ath_softc *sc = priv;
struct ieee80211_hw *hw = sc->hw;
struct ath_rate_priv *ath_rc_priv = priv_sta;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
int is_probe = 0;
......@@ -1508,21 +1521,6 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
/* Find tx rate for unicast frames */
ath_rc_ratefind(sc, ath_rc_priv, ATH_11N_TXMAXTRY, 4,
tx_info, &is_probe, false);
/* Check if aggregation has to be enabled for this tid */
if (conf_is_ht(&hw->conf)) {
if (ieee80211_is_data_qos(fc)) {
u8 *qc, tid;
struct ath_node *an;
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
an = (struct ath_node *)sta->drv_priv;
if(ath_tx_aggr_check(sc, an, tid))
ieee80211_start_tx_ba_session(hw, hdr->addr1, tid);
}
}
}
static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
......
......@@ -677,6 +677,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
txtid = ATH_AN_2_TID(an, tid);
txtid->state |= AGGR_ADDBA_PROGRESS;
ath_tx_pause_tid(sc, txtid);
*ssn = txtid->seq_start;
}
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册