提交 d1a3b737 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Consolidate code that calls tg3_tx_set_bd()

This patch consolidates all code that populates tx BDs into a single
routine.  Setting tx BDs needs to be more carefully controlled to see if
workarounds need to be applied.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e01ee14d
......@@ -5914,18 +5914,37 @@ static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
#endif
}
static inline void tg3_tx_set_bd(struct tg3_napi *tnapi, u32 entry,
static inline void tg3_tx_set_bd(struct tg3_tx_buffer_desc *txbd,
dma_addr_t mapping, u32 len, u32 flags,
u32 mss, u32 vlan)
{
struct tg3_tx_buffer_desc *txbd = &tnapi->tx_ring[entry];
txbd->addr_hi = ((u64) mapping >> 32);
txbd->addr_lo = ((u64) mapping & 0xffffffff);
txbd->len_flags = (len << TXD_LEN_SHIFT) | (flags & 0x0000ffff);
txbd->vlan_tag = (mss << TXD_MSS_SHIFT) | (vlan << TXD_VLAN_TAG_SHIFT);
}
static bool tg3_tx_frag_set(struct tg3_napi *tnapi, u32 entry,
dma_addr_t map, u32 len, u32 flags,
u32 mss, u32 vlan)
{
struct tg3 *tp = tnapi->tp;
bool hwbug = false;
if (tg3_flag(tp, SHORT_DMA_BUG) && len <= 8)
hwbug = 1;
if (tg3_4g_overflow_test(map, len))
hwbug = 1;
if (tg3_40bit_overflow_test(tp, map, len))
hwbug = 1;
tg3_tx_set_bd(&tnapi->tx_ring[entry], map, len, flags, mss, vlan);
return hwbug;
}
static void tg3_tx_skb_unmap(struct tg3_napi *tnapi, u32 entry, int last)
{
int i;
......@@ -5993,17 +6012,8 @@ static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
PCI_DMA_TODEVICE);
/* Make sure the mapping succeeded */
if (pci_dma_mapping_error(tp->pdev, new_addr)) {
ret = -1;
dev_kfree_skb(new_skb);
/* Make sure new skb does not cross any 4G boundaries.
* Drop the packet if it does.
*/
} else if (tg3_4g_overflow_test(new_addr, new_skb->len)) {
pci_unmap_single(tp->pdev, new_addr, new_skb->len,
PCI_DMA_TODEVICE);
ret = -1;
dev_kfree_skb(new_skb);
} else {
base_flags |= TXD_FLAG_END;
......@@ -6011,8 +6021,13 @@ static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
dma_unmap_addr_set(&tnapi->tx_buffers[entry],
mapping, new_addr);
tg3_tx_set_bd(tnapi, entry, new_addr, new_skb->len,
base_flags, mss, vlan);
if (tg3_tx_frag_set(tnapi, entry, new_addr,
new_skb->len, base_flags,
mss, vlan)) {
tg3_tx_skb_unmap(tnapi, entry, 0);
dev_kfree_skb(new_skb);
ret = -1;
}
}
}
......@@ -6196,18 +6211,13 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
would_hit_hwbug = 0;
if (tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
if (tg3_40bit_overflow_test(tp, mapping, len))
would_hit_hwbug = 1;
if (tg3_flag(tp, 5701_DMA_BUG))
would_hit_hwbug = 1;
tg3_tx_set_bd(tnapi, entry, mapping, len, base_flags |
((skb_shinfo(skb)->nr_frags == 0) ? TXD_FLAG_END : 0),
mss, vlan);
if (tg3_tx_frag_set(tnapi, entry, mapping, len, base_flags |
((skb_shinfo(skb)->nr_frags == 0) ? TXD_FLAG_END : 0),
mss, vlan))
would_hit_hwbug = 1;
entry = NEXT_TX(entry);
......@@ -6236,20 +6246,11 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (pci_dma_mapping_error(tp->pdev, mapping))
goto dma_error;
if (tg3_flag(tp, SHORT_DMA_BUG) &&
len <= 8)
would_hit_hwbug = 1;
if (tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
if (tg3_40bit_overflow_test(tp, mapping, len))
if (tg3_tx_frag_set(tnapi, entry, mapping, len,
base_flags | ((i == last) ? TXD_FLAG_END : 0),
tmp_mss, vlan))
would_hit_hwbug = 1;
tg3_tx_set_bd(tnapi, entry, mapping, len, base_flags |
((i == last) ? TXD_FLAG_END : 0),
tmp_mss, vlan);
entry = NEXT_TX(entry);
}
}
......@@ -11375,8 +11376,12 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
rx_start_idx = rnapi->hw_status->idx[0].rx_producer;
tg3_tx_set_bd(tnapi, tnapi->tx_prod, map, tx_len,
base_flags | TXD_FLAG_END, mss, 0);
if (tg3_tx_frag_set(tnapi, tnapi->tx_prod, map, tx_len,
base_flags | TXD_FLAG_END, mss, 0)) {
tnapi->tx_buffers[val].skb = NULL;
dev_kfree_skb(skb);
return -EIO;
}
tnapi->tx_prod++;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册