SH: irq: Remove IRQF_DISABLED

Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/boards/board-secureedge5410.c

@@ -41,8 +41,7 @@ static int __init eraseconfig_init(void)
 	printk("SnapGear: EraseConfig init\n");
 
 	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
-				"Erase Config", NULL))
+	if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
 		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
 				irq);
 	else

arch/sh/boards/mach-cayman/irq.c

@@ -46,13 +46,11 @@ static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
 static struct irqaction cayman_action_smsc = {
 	.name		= "Cayman SMSC Mux",
 	.handler	= cayman_interrupt_smsc,
-	.flags		= IRQF_DISABLED,
 };
 
 static struct irqaction cayman_action_pci2 = {
 	.name		= "Cayman PCI2 Mux",
 	.handler	= cayman_interrupt_pci2,
-	.flags		= IRQF_DISABLED,
 };
 
 static void enable_cayman_irq(struct irq_data *data)

arch/sh/boards/mach-hp6xx/hp6xx_apm.c

@@ -86,7 +86,7 @@ static int __init hp6x0_apm_init(void)
 	int ret;
 
 	ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
-			  IRQF_DISABLED, MODNAME, NULL);
+			  0, MODNAME, NULL);
 	if (unlikely(ret < 0)) {
 		printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
 		       HP680_BTN_IRQ);

arch/sh/drivers/dma/dma-g2.c

@@ -170,7 +170,7 @@ static int __init g2_dma_init(void)
 {
 	int ret;
 
-	ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED,
+	ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
 			  "g2 DMA handler", &g2_dma_info);
 	if (unlikely(ret))
 		return -EINVAL;

arch/sh/drivers/dma/dma-pvr2.c

@@ -70,7 +70,6 @@ static int pvr2_xfer_dma(struct dma_channel *chan)
 static struct irqaction pvr2_dma_irq = {
 	.name		= "pvr2 DMA handler",
 	.handler	= pvr2_dma_interrupt,
-	.flags		= IRQF_DISABLED,
 };
 
 static struct dma_ops pvr2_dma_ops = {

arch/sh/drivers/dma/dma-sh.c

@@ -95,7 +95,7 @@ static int sh_dmac_request_dma(struct dma_channel *chan)
 #if defined(CONFIG_SH_DMA_IRQ_MULTI)
 				IRQF_SHARED,
 #else
-				IRQF_DISABLED,
+				0,
 #endif
 				chan->dev_id, chan);
 }
@@ -305,7 +305,7 @@ static int __init sh_dmac_init(void)
 #if defined(CONFIG_SH_DMA_IRQ_MULTI)
 				IRQF_SHARED,
 #else
-				IRQF_DISABLED,
+				0,
 #endif
 				dmae_name[n], (void *)dmae_name[n]);
 		if (unlikely(i < 0)) {

arch/sh/drivers/dma/dmabrg.c

@@ -174,17 +174,17 @@ static int __init dmabrg_init(void)
 	or = __raw_readl(DMAOR);
 	__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
 
-	ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
+	ret = request_irq(DMABRGI0, dmabrg_irq, 0,
 			"DMABRG USB address error", NULL);
 	if (ret)
 		goto out0;
 
-	ret = request_irq(DMABRGI1, dmabrg_irq, IRQF_DISABLED,
+	ret = request_irq(DMABRGI1, dmabrg_irq, 0,
 			"DMABRG Transfer End", NULL);
 	if (ret)
 		goto out1;
 
-	ret = request_irq(DMABRGI2, dmabrg_irq, IRQF_DISABLED,
+	ret = request_irq(DMABRGI2, dmabrg_irq, 0,
 			"DMABRG Transfer Half", NULL);
 	if (ret == 0)
 		return ret;

arch/sh/drivers/pci/pci-sh5.c

@@ -107,13 +107,13 @@ static int __init sh5pci_init(void)
 	u32 uval;
 
         if (request_irq(IRQ_ERR, pcish5_err_irq,
-                        IRQF_DISABLED, "PCI Error",NULL) < 0) {
+                        0, "PCI Error",NULL) < 0) {
                 printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
                 return -EINVAL;
         }
 
         if (request_irq(IRQ_SERR, pcish5_serr_irq,
-                        IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+                        0, "PCI SERR interrupt", NULL) < 0) {
                 printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
                 return -EINVAL;
         }

arch/sh/drivers/pci/pci-sh7780.c

@@ -172,7 +172,7 @@ static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
 		     PCI_STATUS_SIG_TARGET_ABORT | \
 		     PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
 
-	ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+	ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
 			  "PCI SERR interrupt", hose);
 	if (unlikely(ret)) {
 		printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");

arch/sh/drivers/push-switch.c

@@ -63,7 +63,7 @@ static int switch_drv_probe(struct platform_device *pdev)
 	BUG_ON(!psw_info);
 
 	ret = request_irq(irq, psw_info->irq_handler,
-			  IRQF_DISABLED | psw_info->irq_flags,
+			  psw_info->irq_flags,
 			  psw_info->name ? psw_info->name : DRV_NAME, pdev);
 	if (unlikely(ret < 0))
 		goto err;

arch/sh/kernel/cpu/sh4a/smp-shx3.c

@@ -79,7 +79,7 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
 
 	for (i = 0; i < SMP_MSG_NR; i++)
 		request_irq(104 + i, ipi_interrupt_handler,
-			    IRQF_DISABLED | IRQF_PERCPU, "IPI", (void *)(long)i);
+			    IRQF_PERCPU, "IPI", (void *)(long)i);
 
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);