提交 d07e75a6 编写于 作者: I Ingo Molnar

Merge branch 'sched/cleanups' into sched/core

Merge reason: these bits, formerly in sched/urgent, are too late for v3.10.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
......@@ -11,7 +11,7 @@ ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
CFLAGS_core.o := $(PROFILING) -fno-omit-frame-pointer
endif
obj-y += core.o clock.o cputime.o idle_task.o fair.o rt.o stop_task.o
obj-y += core.o proc.o clock.o cputime.o idle_task.o fair.o rt.o stop_task.o
obj-$(CONFIG_SMP) += cpupri.o
obj-$(CONFIG_SCHED_AUTOGROUP) += auto_group.o
obj-$(CONFIG_SCHEDSTATS) += stats.o
......
......@@ -2056,575 +2056,6 @@ unsigned long nr_iowait_cpu(int cpu)
return atomic_read(&this->nr_iowait);
}
unsigned long this_cpu_load(void)
{
struct rq *this = this_rq();
return this->cpu_load[0];
}
/*
* Global load-average calculations
*
* We take a distributed and async approach to calculating the global load-avg
* in order to minimize overhead.
*
* The global load average is an exponentially decaying average of nr_running +
* nr_uninterruptible.
*
* Once every LOAD_FREQ:
*
* nr_active = 0;
* for_each_possible_cpu(cpu)
* nr_active += cpu_of(cpu)->nr_running + cpu_of(cpu)->nr_uninterruptible;
*
* avenrun[n] = avenrun[0] * exp_n + nr_active * (1 - exp_n)
*
* Due to a number of reasons the above turns in the mess below:
*
* - for_each_possible_cpu() is prohibitively expensive on machines with
* serious number of cpus, therefore we need to take a distributed approach
* to calculating nr_active.
*
* \Sum_i x_i(t) = \Sum_i x_i(t) - x_i(t_0) | x_i(t_0) := 0
* = \Sum_i { \Sum_j=1 x_i(t_j) - x_i(t_j-1) }
*
* So assuming nr_active := 0 when we start out -- true per definition, we
* can simply take per-cpu deltas and fold those into a global accumulate
* to obtain the same result. See calc_load_fold_active().
*
* Furthermore, in order to avoid synchronizing all per-cpu delta folding
* across the machine, we assume 10 ticks is sufficient time for every
* cpu to have completed this task.
*
* This places an upper-bound on the IRQ-off latency of the machine. Then
* again, being late doesn't loose the delta, just wrecks the sample.
*
* - cpu_rq()->nr_uninterruptible isn't accurately tracked per-cpu because
* this would add another cross-cpu cacheline miss and atomic operation
* to the wakeup path. Instead we increment on whatever cpu the task ran
* when it went into uninterruptible state and decrement on whatever cpu
* did the wakeup. This means that only the sum of nr_uninterruptible over
* all cpus yields the correct result.
*
* This covers the NO_HZ=n code, for extra head-aches, see the comment below.
*/
/* Variables and functions for calc_load */
static atomic_long_t calc_load_tasks;
static unsigned long calc_load_update;
unsigned long avenrun[3];
EXPORT_SYMBOL(avenrun); /* should be removed */
/**
* get_avenrun - get the load average array
* @loads: pointer to dest load array
* @offset: offset to add
* @shift: shift count to shift the result left
*
* These values are estimates at best, so no need for locking.
*/
void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
{
loads[0] = (avenrun[0] + offset) << shift;
loads[1] = (avenrun[1] + offset) << shift;
loads[2] = (avenrun[2] + offset) << shift;
}
static long calc_load_fold_active(struct rq *this_rq)
{
long nr_active, delta = 0;
nr_active = this_rq->nr_running;
nr_active += (long) this_rq->nr_uninterruptible;
if (nr_active != this_rq->calc_load_active) {
delta = nr_active - this_rq->calc_load_active;
this_rq->calc_load_active = nr_active;
}
return delta;
}
/*
* a1 = a0 * e + a * (1 - e)
*/
static unsigned long
calc_load(unsigned long load, unsigned long exp, unsigned long active)
{
load *= exp;
load += active * (FIXED_1 - exp);
load += 1UL << (FSHIFT - 1);
return load >> FSHIFT;
}
#ifdef CONFIG_NO_HZ_COMMON
/*
* Handle NO_HZ for the global load-average.
*
* Since the above described distributed algorithm to compute the global
* load-average relies on per-cpu sampling from the tick, it is affected by
* NO_HZ.
*
* The basic idea is to fold the nr_active delta into a global idle-delta upon
* entering NO_HZ state such that we can include this as an 'extra' cpu delta
* when we read the global state.
*
* Obviously reality has to ruin such a delightfully simple scheme:
*
* - When we go NO_HZ idle during the window, we can negate our sample
* contribution, causing under-accounting.
*
* We avoid this by keeping two idle-delta counters and flipping them
* when the window starts, thus separating old and new NO_HZ load.
*
* The only trick is the slight shift in index flip for read vs write.
*
* 0s 5s 10s 15s
* +10 +10 +10 +10
* |-|-----------|-|-----------|-|-----------|-|
* r:0 0 1 1 0 0 1 1 0
* w:0 1 1 0 0 1 1 0 0
*
* This ensures we'll fold the old idle contribution in this window while
* accumlating the new one.
*
* - When we wake up from NO_HZ idle during the window, we push up our
* contribution, since we effectively move our sample point to a known
* busy state.
*
* This is solved by pushing the window forward, and thus skipping the
* sample, for this cpu (effectively using the idle-delta for this cpu which
* was in effect at the time the window opened). This also solves the issue
* of having to deal with a cpu having been in NOHZ idle for multiple
* LOAD_FREQ intervals.
*
* When making the ILB scale, we should try to pull this in as well.
*/
static atomic_long_t calc_load_idle[2];
static int calc_load_idx;
static inline int calc_load_write_idx(void)
{
int idx = calc_load_idx;
/*
* See calc_global_nohz(), if we observe the new index, we also
* need to observe the new update time.
*/
smp_rmb();
/*
* If the folding window started, make sure we start writing in the
* next idle-delta.
*/
if (!time_before(jiffies, calc_load_update))
idx++;
return idx & 1;
}
static inline int calc_load_read_idx(void)
{
return calc_load_idx & 1;
}
void calc_load_enter_idle(void)
{
struct rq *this_rq = this_rq();
long delta;
/*
* We're going into NOHZ mode, if there's any pending delta, fold it
* into the pending idle delta.
*/
delta = calc_load_fold_active(this_rq);
if (delta) {
int idx = calc_load_write_idx();
atomic_long_add(delta, &calc_load_idle[idx]);
}
}
void calc_load_exit_idle(void)
{
struct rq *this_rq = this_rq();
/*
* If we're still before the sample window, we're done.
*/
if (time_before(jiffies, this_rq->calc_load_update))
return;
/*
* We woke inside or after the sample window, this means we're already
* accounted through the nohz accounting, so skip the entire deal and
* sync up for the next window.
*/
this_rq->calc_load_update = calc_load_update;
if (time_before(jiffies, this_rq->calc_load_update + 10))
this_rq->calc_load_update += LOAD_FREQ;
}
static long calc_load_fold_idle(void)
{
int idx = calc_load_read_idx();
long delta = 0;
if (atomic_long_read(&calc_load_idle[idx]))
delta = atomic_long_xchg(&calc_load_idle[idx], 0);
return delta;
}
/**
* fixed_power_int - compute: x^n, in O(log n) time
*
* @x: base of the power
* @frac_bits: fractional bits of @x
* @n: power to raise @x to.
*
* By exploiting the relation between the definition of the natural power
* function: x^n := x*x*...*x (x multiplied by itself for n times), and
* the binary encoding of numbers used by computers: n := \Sum n_i * 2^i,
* (where: n_i \elem {0, 1}, the binary vector representing n),
* we find: x^n := x^(\Sum n_i * 2^i) := \Prod x^(n_i * 2^i), which is
* of course trivially computable in O(log_2 n), the length of our binary
* vector.
*/
static unsigned long
fixed_power_int(unsigned long x, unsigned int frac_bits, unsigned int n)
{
unsigned long result = 1UL << frac_bits;
if (n) for (;;) {
if (n & 1) {
result *= x;
result += 1UL << (frac_bits - 1);
result >>= frac_bits;
}
n >>= 1;
if (!n)
break;
x *= x;
x += 1UL << (frac_bits - 1);
x >>= frac_bits;
}
return result;
}
/*
* a1 = a0 * e + a * (1 - e)
*
* a2 = a1 * e + a * (1 - e)
* = (a0 * e + a * (1 - e)) * e + a * (1 - e)
* = a0 * e^2 + a * (1 - e) * (1 + e)
*
* a3 = a2 * e + a * (1 - e)
* = (a0 * e^2 + a * (1 - e) * (1 + e)) * e + a * (1 - e)
* = a0 * e^3 + a * (1 - e) * (1 + e + e^2)
*
* ...
*
* an = a0 * e^n + a * (1 - e) * (1 + e + ... + e^n-1) [1]
* = a0 * e^n + a * (1 - e) * (1 - e^n)/(1 - e)
* = a0 * e^n + a * (1 - e^n)
*
* [1] application of the geometric series:
*
* n 1 - x^(n+1)
* S_n := \Sum x^i = -------------
* i=0 1 - x
*/
static unsigned long
calc_load_n(unsigned long load, unsigned long exp,
unsigned long active, unsigned int n)
{
return calc_load(load, fixed_power_int(exp, FSHIFT, n), active);
}
/*
* NO_HZ can leave us missing all per-cpu ticks calling
* calc_load_account_active(), but since an idle CPU folds its delta into
* calc_load_tasks_idle per calc_load_account_idle(), all we need to do is fold
* in the pending idle delta if our idle period crossed a load cycle boundary.
*
* Once we've updated the global active value, we need to apply the exponential
* weights adjusted to the number of cycles missed.
*/
static void calc_global_nohz(void)
{
long delta, active, n;
if (!time_before(jiffies, calc_load_update + 10)) {
/*
* Catch-up, fold however many we are behind still
*/
delta = jiffies - calc_load_update - 10;
n = 1 + (delta / LOAD_FREQ);
active = atomic_long_read(&calc_load_tasks);
active = active > 0 ? active * FIXED_1 : 0;
avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
calc_load_update += n * LOAD_FREQ;
}
/*
* Flip the idle index...
*
* Make sure we first write the new time then flip the index, so that
* calc_load_write_idx() will see the new time when it reads the new
* index, this avoids a double flip messing things up.
*/
smp_wmb();
calc_load_idx++;
}
#else /* !CONFIG_NO_HZ_COMMON */
static inline long calc_load_fold_idle(void) { return 0; }
static inline void calc_global_nohz(void) { }
#endif /* CONFIG_NO_HZ_COMMON */
/*
* calc_load - update the avenrun load estimates 10 ticks after the
* CPUs have updated calc_load_tasks.
*/
void calc_global_load(unsigned long ticks)
{
long active, delta;
if (time_before(jiffies, calc_load_update + 10))
return;
/*
* Fold the 'old' idle-delta to include all NO_HZ cpus.
*/
delta = calc_load_fold_idle();
if (delta)
atomic_long_add(delta, &calc_load_tasks);
active = atomic_long_read(&calc_load_tasks);
active = active > 0 ? active * FIXED_1 : 0;
avenrun[0] = calc_load(avenrun[0], EXP_1, active);
avenrun[1] = calc_load(avenrun[1], EXP_5, active);
avenrun[2] = calc_load(avenrun[2], EXP_15, active);
calc_load_update += LOAD_FREQ;
/*
* In case we idled for multiple LOAD_FREQ intervals, catch up in bulk.
*/
calc_global_nohz();
}
/*
* Called from update_cpu_load() to periodically update this CPU's
* active count.
*/
static void calc_load_account_active(struct rq *this_rq)
{
long delta;
if (time_before(jiffies, this_rq->calc_load_update))
return;
delta = calc_load_fold_active(this_rq);
if (delta)
atomic_long_add(delta, &calc_load_tasks);
this_rq->calc_load_update += LOAD_FREQ;
}
/*
* End of global load-average stuff
*/
/*
* The exact cpuload at various idx values, calculated at every tick would be
* load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load
*
* If a cpu misses updates for n-1 ticks (as it was idle) and update gets called
* on nth tick when cpu may be busy, then we have:
* load = ((2^idx - 1) / 2^idx)^(n-1) * load
* load = (2^idx - 1) / 2^idx) * load + 1 / 2^idx * cur_load
*
* decay_load_missed() below does efficient calculation of
* load = ((2^idx - 1) / 2^idx)^(n-1) * load
* avoiding 0..n-1 loop doing load = ((2^idx - 1) / 2^idx) * load
*
* The calculation is approximated on a 128 point scale.
* degrade_zero_ticks is the number of ticks after which load at any
* particular idx is approximated to be zero.
* degrade_factor is a precomputed table, a row for each load idx.
* Each column corresponds to degradation factor for a power of two ticks,
* based on 128 point scale.
* Example:
* row 2, col 3 (=12) says that the degradation at load idx 2 after
* 8 ticks is 12/128 (which is an approximation of exact factor 3^8/4^8).
*
* With this power of 2 load factors, we can degrade the load n times
* by looking at 1 bits in n and doing as many mult/shift instead of
* n mult/shifts needed by the exact degradation.
*/
#define DEGRADE_SHIFT 7
static const unsigned char
degrade_zero_ticks[CPU_LOAD_IDX_MAX] = {0, 8, 32, 64, 128};
static const unsigned char
degrade_factor[CPU_LOAD_IDX_MAX][DEGRADE_SHIFT + 1] = {
{0, 0, 0, 0, 0, 0, 0, 0},
{64, 32, 8, 0, 0, 0, 0, 0},
{96, 72, 40, 12, 1, 0, 0},
{112, 98, 75, 43, 15, 1, 0},
{120, 112, 98, 76, 45, 16, 2} };
/*
* Update cpu_load for any missed ticks, due to tickless idle. The backlog
* would be when CPU is idle and so we just decay the old load without
* adding any new load.
*/
static unsigned long
decay_load_missed(unsigned long load, unsigned long missed_updates, int idx)
{
int j = 0;
if (!missed_updates)
return load;
if (missed_updates >= degrade_zero_ticks[idx])
return 0;
if (idx == 1)
return load >> missed_updates;
while (missed_updates) {
if (missed_updates % 2)
load = (load * degrade_factor[idx][j]) >> DEGRADE_SHIFT;
missed_updates >>= 1;
j++;
}
return load;
}
/*
* Update rq->cpu_load[] statistics. This function is usually called every
* scheduler tick (TICK_NSEC). With tickless idle this will not be called
* every tick. We fix it up based on jiffies.
*/
static void __update_cpu_load(struct rq *this_rq, unsigned long this_load,
unsigned long pending_updates)
{
int i, scale;
this_rq->nr_load_updates++;
/* Update our load: */
this_rq->cpu_load[0] = this_load; /* Fasttrack for idx 0 */
for (i = 1, scale = 2; i < CPU_LOAD_IDX_MAX; i++, scale += scale) {
unsigned long old_load, new_load;
/* scale is effectively 1 << i now, and >> i divides by scale */
old_load = this_rq->cpu_load[i];
old_load = decay_load_missed(old_load, pending_updates - 1, i);
new_load = this_load;
/*
* Round up the averaging division if load is increasing. This
* prevents us from getting stuck on 9 if the load is 10, for
* example.
*/
if (new_load > old_load)
new_load += scale - 1;
this_rq->cpu_load[i] = (old_load * (scale - 1) + new_load) >> i;
}
sched_avg_update(this_rq);
}
#ifdef CONFIG_NO_HZ_COMMON
/*
* There is no sane way to deal with nohz on smp when using jiffies because the
* cpu doing the jiffies update might drift wrt the cpu doing the jiffy reading
* causing off-by-one errors in observed deltas; {0,2} instead of {1,1}.
*
* Therefore we cannot use the delta approach from the regular tick since that
* would seriously skew the load calculation. However we'll make do for those
* updates happening while idle (nohz_idle_balance) or coming out of idle
* (tick_nohz_idle_exit).
*
* This means we might still be one tick off for nohz periods.
*/
/*
* Called from nohz_idle_balance() to update the load ratings before doing the
* idle balance.
*/
void update_idle_cpu_load(struct rq *this_rq)
{
unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
unsigned long load = this_rq->load.weight;
unsigned long pending_updates;
/*
* bail if there's load or we're actually up-to-date.
*/
if (load || curr_jiffies == this_rq->last_load_update_tick)
return;
pending_updates = curr_jiffies - this_rq->last_load_update_tick;
this_rq->last_load_update_tick = curr_jiffies;
__update_cpu_load(this_rq, load, pending_updates);
}
/*
* Called from tick_nohz_idle_exit() -- try and fix up the ticks we missed.
*/
void update_cpu_load_nohz(void)
{
struct rq *this_rq = this_rq();
unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
unsigned long pending_updates;
if (curr_jiffies == this_rq->last_load_update_tick)
return;
raw_spin_lock(&this_rq->lock);
pending_updates = curr_jiffies - this_rq->last_load_update_tick;
if (pending_updates) {
this_rq->last_load_update_tick = curr_jiffies;
/*
* We were idle, this means load 0, the current load might be
* !0 due to remote wakeups and the sort.
*/
__update_cpu_load(this_rq, 0, pending_updates);
}
raw_spin_unlock(&this_rq->lock);
}
#endif /* CONFIG_NO_HZ_COMMON */
/*
* Called from scheduler_tick()
*/
static void update_cpu_load_active(struct rq *this_rq)
{
/*
* See the mess around update_idle_cpu_load() / update_cpu_load_nohz().
*/
this_rq->last_load_update_tick = jiffies;
__update_cpu_load(this_rq, this_rq->load.weight, 1);
calc_load_account_active(this_rq);
}
#ifdef CONFIG_SMP
/*
......
......@@ -113,6 +113,24 @@ unsigned int __read_mostly sysctl_sched_shares_window = 10000000UL;
unsigned int sysctl_sched_cfs_bandwidth_slice = 5000UL;
#endif
static inline void update_load_add(struct load_weight *lw, unsigned long inc)
{
lw->weight += inc;
lw->inv_weight = 0;
}
static inline void update_load_sub(struct load_weight *lw, unsigned long dec)
{
lw->weight -= dec;
lw->inv_weight = 0;
}
static inline void update_load_set(struct load_weight *lw, unsigned long w)
{
lw->weight = w;
lw->inv_weight = 0;
}
/*
* Increase the granularity value when there are more CPUs,
* because with more CPUs the 'effective latency' as visible
......
/*
* kernel/sched/proc.c
*
* Kernel load calculations, forked from sched/core.c
*/
#include <linux/export.h>
#include "sched.h"
unsigned long this_cpu_load(void)
{
struct rq *this = this_rq();
return this->cpu_load[0];
}
/*
* Global load-average calculations
*
* We take a distributed and async approach to calculating the global load-avg
* in order to minimize overhead.
*
* The global load average is an exponentially decaying average of nr_running +
* nr_uninterruptible.
*
* Once every LOAD_FREQ:
*
* nr_active = 0;
* for_each_possible_cpu(cpu)
* nr_active += cpu_of(cpu)->nr_running + cpu_of(cpu)->nr_uninterruptible;
*
* avenrun[n] = avenrun[0] * exp_n + nr_active * (1 - exp_n)
*
* Due to a number of reasons the above turns in the mess below:
*
* - for_each_possible_cpu() is prohibitively expensive on machines with
* serious number of cpus, therefore we need to take a distributed approach
* to calculating nr_active.
*
* \Sum_i x_i(t) = \Sum_i x_i(t) - x_i(t_0) | x_i(t_0) := 0
* = \Sum_i { \Sum_j=1 x_i(t_j) - x_i(t_j-1) }
*
* So assuming nr_active := 0 when we start out -- true per definition, we
* can simply take per-cpu deltas and fold those into a global accumulate
* to obtain the same result. See calc_load_fold_active().
*
* Furthermore, in order to avoid synchronizing all per-cpu delta folding
* across the machine, we assume 10 ticks is sufficient time for every
* cpu to have completed this task.
*
* This places an upper-bound on the IRQ-off latency of the machine. Then
* again, being late doesn't loose the delta, just wrecks the sample.
*
* - cpu_rq()->nr_uninterruptible isn't accurately tracked per-cpu because
* this would add another cross-cpu cacheline miss and atomic operation
* to the wakeup path. Instead we increment on whatever cpu the task ran
* when it went into uninterruptible state and decrement on whatever cpu
* did the wakeup. This means that only the sum of nr_uninterruptible over
* all cpus yields the correct result.
*
* This covers the NO_HZ=n code, for extra head-aches, see the comment below.
*/
/* Variables and functions for calc_load */
atomic_long_t calc_load_tasks;
unsigned long calc_load_update;
unsigned long avenrun[3];
EXPORT_SYMBOL(avenrun); /* should be removed */
/**
* get_avenrun - get the load average array
* @loads: pointer to dest load array
* @offset: offset to add
* @shift: shift count to shift the result left
*
* These values are estimates at best, so no need for locking.
*/
void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
{
loads[0] = (avenrun[0] + offset) << shift;
loads[1] = (avenrun[1] + offset) << shift;
loads[2] = (avenrun[2] + offset) << shift;
}
long calc_load_fold_active(struct rq *this_rq)
{
long nr_active, delta = 0;
nr_active = this_rq->nr_running;
nr_active += (long) this_rq->nr_uninterruptible;
if (nr_active != this_rq->calc_load_active) {
delta = nr_active - this_rq->calc_load_active;
this_rq->calc_load_active = nr_active;
}
return delta;
}
/*
* a1 = a0 * e + a * (1 - e)
*/
static unsigned long
calc_load(unsigned long load, unsigned long exp, unsigned long active)
{
load *= exp;
load += active * (FIXED_1 - exp);
load += 1UL << (FSHIFT - 1);
return load >> FSHIFT;
}
#ifdef CONFIG_NO_HZ_COMMON
/*
* Handle NO_HZ for the global load-average.
*
* Since the above described distributed algorithm to compute the global
* load-average relies on per-cpu sampling from the tick, it is affected by
* NO_HZ.
*
* The basic idea is to fold the nr_active delta into a global idle-delta upon
* entering NO_HZ state such that we can include this as an 'extra' cpu delta
* when we read the global state.
*
* Obviously reality has to ruin such a delightfully simple scheme:
*
* - When we go NO_HZ idle during the window, we can negate our sample
* contribution, causing under-accounting.
*
* We avoid this by keeping two idle-delta counters and flipping them
* when the window starts, thus separating old and new NO_HZ load.
*
* The only trick is the slight shift in index flip for read vs write.
*
* 0s 5s 10s 15s
* +10 +10 +10 +10
* |-|-----------|-|-----------|-|-----------|-|
* r:0 0 1 1 0 0 1 1 0
* w:0 1 1 0 0 1 1 0 0
*
* This ensures we'll fold the old idle contribution in this window while
* accumlating the new one.
*
* - When we wake up from NO_HZ idle during the window, we push up our
* contribution, since we effectively move our sample point to a known
* busy state.
*
* This is solved by pushing the window forward, and thus skipping the
* sample, for this cpu (effectively using the idle-delta for this cpu which
* was in effect at the time the window opened). This also solves the issue
* of having to deal with a cpu having been in NOHZ idle for multiple
* LOAD_FREQ intervals.
*
* When making the ILB scale, we should try to pull this in as well.
*/
static atomic_long_t calc_load_idle[2];
static int calc_load_idx;
static inline int calc_load_write_idx(void)
{
int idx = calc_load_idx;
/*
* See calc_global_nohz(), if we observe the new index, we also
* need to observe the new update time.
*/
smp_rmb();
/*
* If the folding window started, make sure we start writing in the
* next idle-delta.
*/
if (!time_before(jiffies, calc_load_update))
idx++;
return idx & 1;
}
static inline int calc_load_read_idx(void)
{
return calc_load_idx & 1;
}
void calc_load_enter_idle(void)
{
struct rq *this_rq = this_rq();
long delta;
/*
* We're going into NOHZ mode, if there's any pending delta, fold it
* into the pending idle delta.
*/
delta = calc_load_fold_active(this_rq);
if (delta) {
int idx = calc_load_write_idx();
atomic_long_add(delta, &calc_load_idle[idx]);
}
}
void calc_load_exit_idle(void)
{
struct rq *this_rq = this_rq();
/*
* If we're still before the sample window, we're done.
*/
if (time_before(jiffies, this_rq->calc_load_update))
return;
/*
* We woke inside or after the sample window, this means we're already
* accounted through the nohz accounting, so skip the entire deal and
* sync up for the next window.
*/
this_rq->calc_load_update = calc_load_update;
if (time_before(jiffies, this_rq->calc_load_update + 10))
this_rq->calc_load_update += LOAD_FREQ;
}
static long calc_load_fold_idle(void)
{
int idx = calc_load_read_idx();
long delta = 0;
if (atomic_long_read(&calc_load_idle[idx]))
delta = atomic_long_xchg(&calc_load_idle[idx], 0);
return delta;
}
/**
* fixed_power_int - compute: x^n, in O(log n) time
*
* @x: base of the power
* @frac_bits: fractional bits of @x
* @n: power to raise @x to.
*
* By exploiting the relation between the definition of the natural power
* function: x^n := x*x*...*x (x multiplied by itself for n times), and
* the binary encoding of numbers used by computers: n := \Sum n_i * 2^i,
* (where: n_i \elem {0, 1}, the binary vector representing n),
* we find: x^n := x^(\Sum n_i * 2^i) := \Prod x^(n_i * 2^i), which is
* of course trivially computable in O(log_2 n), the length of our binary
* vector.
*/
static unsigned long
fixed_power_int(unsigned long x, unsigned int frac_bits, unsigned int n)
{
unsigned long result = 1UL << frac_bits;
if (n) for (;;) {
if (n & 1) {
result *= x;
result += 1UL << (frac_bits - 1);
result >>= frac_bits;
}
n >>= 1;
if (!n)
break;
x *= x;
x += 1UL << (frac_bits - 1);
x >>= frac_bits;
}
return result;
}
/*
* a1 = a0 * e + a * (1 - e)
*
* a2 = a1 * e + a * (1 - e)
* = (a0 * e + a * (1 - e)) * e + a * (1 - e)
* = a0 * e^2 + a * (1 - e) * (1 + e)
*
* a3 = a2 * e + a * (1 - e)
* = (a0 * e^2 + a * (1 - e) * (1 + e)) * e + a * (1 - e)
* = a0 * e^3 + a * (1 - e) * (1 + e + e^2)
*
* ...
*
* an = a0 * e^n + a * (1 - e) * (1 + e + ... + e^n-1) [1]
* = a0 * e^n + a * (1 - e) * (1 - e^n)/(1 - e)
* = a0 * e^n + a * (1 - e^n)
*
* [1] application of the geometric series:
*
* n 1 - x^(n+1)
* S_n := \Sum x^i = -------------
* i=0 1 - x
*/
static unsigned long
calc_load_n(unsigned long load, unsigned long exp,
unsigned long active, unsigned int n)
{
return calc_load(load, fixed_power_int(exp, FSHIFT, n), active);
}
/*
* NO_HZ can leave us missing all per-cpu ticks calling
* calc_load_account_active(), but since an idle CPU folds its delta into
* calc_load_tasks_idle per calc_load_account_idle(), all we need to do is fold
* in the pending idle delta if our idle period crossed a load cycle boundary.
*
* Once we've updated the global active value, we need to apply the exponential
* weights adjusted to the number of cycles missed.
*/
static void calc_global_nohz(void)
{
long delta, active, n;
if (!time_before(jiffies, calc_load_update + 10)) {
/*
* Catch-up, fold however many we are behind still
*/
delta = jiffies - calc_load_update - 10;
n = 1 + (delta / LOAD_FREQ);
active = atomic_long_read(&calc_load_tasks);
active = active > 0 ? active * FIXED_1 : 0;
avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
calc_load_update += n * LOAD_FREQ;
}
/*
* Flip the idle index...
*
* Make sure we first write the new time then flip the index, so that
* calc_load_write_idx() will see the new time when it reads the new
* index, this avoids a double flip messing things up.
*/
smp_wmb();
calc_load_idx++;
}
#else /* !CONFIG_NO_HZ_COMMON */
static inline long calc_load_fold_idle(void) { return 0; }
static inline void calc_global_nohz(void) { }
#endif /* CONFIG_NO_HZ_COMMON */
/*
* calc_load - update the avenrun load estimates 10 ticks after the
* CPUs have updated calc_load_tasks.
*/
void calc_global_load(unsigned long ticks)
{
long active, delta;
if (time_before(jiffies, calc_load_update + 10))
return;
/*
* Fold the 'old' idle-delta to include all NO_HZ cpus.
*/
delta = calc_load_fold_idle();
if (delta)
atomic_long_add(delta, &calc_load_tasks);
active = atomic_long_read(&calc_load_tasks);
active = active > 0 ? active * FIXED_1 : 0;
avenrun[0] = calc_load(avenrun[0], EXP_1, active);
avenrun[1] = calc_load(avenrun[1], EXP_5, active);
avenrun[2] = calc_load(avenrun[2], EXP_15, active);
calc_load_update += LOAD_FREQ;
/*
* In case we idled for multiple LOAD_FREQ intervals, catch up in bulk.
*/
calc_global_nohz();
}
/*
* Called from update_cpu_load() to periodically update this CPU's
* active count.
*/
static void calc_load_account_active(struct rq *this_rq)
{
long delta;
if (time_before(jiffies, this_rq->calc_load_update))
return;
delta = calc_load_fold_active(this_rq);
if (delta)
atomic_long_add(delta, &calc_load_tasks);
this_rq->calc_load_update += LOAD_FREQ;
}
/*
* End of global load-average stuff
*/
/*
* The exact cpuload at various idx values, calculated at every tick would be
* load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load
*
* If a cpu misses updates for n-1 ticks (as it was idle) and update gets called
* on nth tick when cpu may be busy, then we have:
* load = ((2^idx - 1) / 2^idx)^(n-1) * load
* load = (2^idx - 1) / 2^idx) * load + 1 / 2^idx * cur_load
*
* decay_load_missed() below does efficient calculation of
* load = ((2^idx - 1) / 2^idx)^(n-1) * load
* avoiding 0..n-1 loop doing load = ((2^idx - 1) / 2^idx) * load
*
* The calculation is approximated on a 128 point scale.
* degrade_zero_ticks is the number of ticks after which load at any
* particular idx is approximated to be zero.
* degrade_factor is a precomputed table, a row for each load idx.
* Each column corresponds to degradation factor for a power of two ticks,
* based on 128 point scale.
* Example:
* row 2, col 3 (=12) says that the degradation at load idx 2 after
* 8 ticks is 12/128 (which is an approximation of exact factor 3^8/4^8).
*
* With this power of 2 load factors, we can degrade the load n times
* by looking at 1 bits in n and doing as many mult/shift instead of
* n mult/shifts needed by the exact degradation.
*/
#define DEGRADE_SHIFT 7
static const unsigned char
degrade_zero_ticks[CPU_LOAD_IDX_MAX] = {0, 8, 32, 64, 128};
static const unsigned char
degrade_factor[CPU_LOAD_IDX_MAX][DEGRADE_SHIFT + 1] = {
{0, 0, 0, 0, 0, 0, 0, 0},
{64, 32, 8, 0, 0, 0, 0, 0},
{96, 72, 40, 12, 1, 0, 0},
{112, 98, 75, 43, 15, 1, 0},
{120, 112, 98, 76, 45, 16, 2} };
/*
* Update cpu_load for any missed ticks, due to tickless idle. The backlog
* would be when CPU is idle and so we just decay the old load without
* adding any new load.
*/
static unsigned long
decay_load_missed(unsigned long load, unsigned long missed_updates, int idx)
{
int j = 0;
if (!missed_updates)
return load;
if (missed_updates >= degrade_zero_ticks[idx])
return 0;
if (idx == 1)
return load >> missed_updates;
while (missed_updates) {
if (missed_updates % 2)
load = (load * degrade_factor[idx][j]) >> DEGRADE_SHIFT;
missed_updates >>= 1;
j++;
}
return load;
}
/*
* Update rq->cpu_load[] statistics. This function is usually called every
* scheduler tick (TICK_NSEC). With tickless idle this will not be called
* every tick. We fix it up based on jiffies.
*/
static void __update_cpu_load(struct rq *this_rq, unsigned long this_load,
unsigned long pending_updates)
{
int i, scale;
this_rq->nr_load_updates++;
/* Update our load: */
this_rq->cpu_load[0] = this_load; /* Fasttrack for idx 0 */
for (i = 1, scale = 2; i < CPU_LOAD_IDX_MAX; i++, scale += scale) {
unsigned long old_load, new_load;
/* scale is effectively 1 << i now, and >> i divides by scale */
old_load = this_rq->cpu_load[i];
old_load = decay_load_missed(old_load, pending_updates - 1, i);
new_load = this_load;
/*
* Round up the averaging division if load is increasing. This
* prevents us from getting stuck on 9 if the load is 10, for
* example.
*/
if (new_load > old_load)
new_load += scale - 1;
this_rq->cpu_load[i] = (old_load * (scale - 1) + new_load) >> i;
}
sched_avg_update(this_rq);
}
#ifdef CONFIG_NO_HZ_COMMON
/*
* There is no sane way to deal with nohz on smp when using jiffies because the
* cpu doing the jiffies update might drift wrt the cpu doing the jiffy reading
* causing off-by-one errors in observed deltas; {0,2} instead of {1,1}.
*
* Therefore we cannot use the delta approach from the regular tick since that
* would seriously skew the load calculation. However we'll make do for those
* updates happening while idle (nohz_idle_balance) or coming out of idle
* (tick_nohz_idle_exit).
*
* This means we might still be one tick off for nohz periods.
*/
/*
* Called from nohz_idle_balance() to update the load ratings before doing the
* idle balance.
*/
void update_idle_cpu_load(struct rq *this_rq)
{
unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
unsigned long load = this_rq->load.weight;
unsigned long pending_updates;
/*
* bail if there's load or we're actually up-to-date.
*/
if (load || curr_jiffies == this_rq->last_load_update_tick)
return;
pending_updates = curr_jiffies - this_rq->last_load_update_tick;
this_rq->last_load_update_tick = curr_jiffies;
__update_cpu_load(this_rq, load, pending_updates);
}
/*
* Called from tick_nohz_idle_exit() -- try and fix up the ticks we missed.
*/
void update_cpu_load_nohz(void)
{
struct rq *this_rq = this_rq();
unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
unsigned long pending_updates;
if (curr_jiffies == this_rq->last_load_update_tick)
return;
raw_spin_lock(&this_rq->lock);
pending_updates = curr_jiffies - this_rq->last_load_update_tick;
if (pending_updates) {
this_rq->last_load_update_tick = curr_jiffies;
/*
* We were idle, this means load 0, the current load might be
* !0 due to remote wakeups and the sort.
*/
__update_cpu_load(this_rq, 0, pending_updates);
}
raw_spin_unlock(&this_rq->lock);
}
#endif /* CONFIG_NO_HZ */
/*
* Called from scheduler_tick()
*/
void update_cpu_load_active(struct rq *this_rq)
{
/*
* See the mess around update_idle_cpu_load() / update_cpu_load_nohz().
*/
this_rq->last_load_update_tick = jiffies;
__update_cpu_load(this_rq, this_rq->load.weight, 1);
calc_load_account_active(this_rq);
}
......@@ -10,8 +10,16 @@
#include "cpupri.h"
#include "cpuacct.h"
struct rq;
extern __read_mostly int scheduler_running;
extern unsigned long calc_load_update;
extern atomic_long_t calc_load_tasks;
extern long calc_load_fold_active(struct rq *this_rq);
extern void update_cpu_load_active(struct rq *this_rq);
/*
* Convert user-nice values [ -20 ... 0 ... 19 ]
* to static priority [ MAX_RT_PRIO..MAX_PRIO-1 ],
......@@ -884,24 +892,6 @@ static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
#define WF_FORK 0x02 /* child wakeup after fork */
#define WF_MIGRATED 0x4 /* internal use, task got migrated */
static inline void update_load_add(struct load_weight *lw, unsigned long inc)
{
lw->weight += inc;
lw->inv_weight = 0;
}
static inline void update_load_sub(struct load_weight *lw, unsigned long dec)
{
lw->weight -= dec;
lw->inv_weight = 0;
}
static inline void update_load_set(struct load_weight *lw, unsigned long w)
{
lw->weight = w;
lw->inv_weight = 0;
}
/*
* To aid in avoiding the subversion of "niceness" due to uneven distribution
* of tasks with abnormal "nice" values across CPUs the contribution that
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册