Merge branch 'next' into for-linus

Documentation/input/multi-touch-protocol.txt

@@ -6,31 +6,149 @@ Multi-touch (MT) Protocol
 Introduction
 ------------
 
-In order to utilize the full power of the new multi-touch devices, a way to
-report detailed finger data to user space is needed. This document
-describes the multi-touch (MT) protocol which allows kernel drivers to
-report details for an arbitrary number of fingers.
+In order to utilize the full power of the new multi-touch and multi-user
+devices, a way to report detailed data from multiple contacts, i.e.,
+objects in direct contact with the device surface, is needed.  This
+document describes the multi-touch (MT) protocol which allows kernel
+drivers to report details for an arbitrary number of contacts.
+
+The protocol is divided into two types, depending on the capabilities of the
+hardware. For devices handling anonymous contacts (type A), the protocol
+describes how to send the raw data for all contacts to the receiver. For
+devices capable of tracking identifiable contacts (type B), the protocol
+describes how to send updates for individual contacts via event slots.
+
+
+Protocol Usage
+--------------
+
+Contact details are sent sequentially as separate packets of ABS_MT
+events. Only the ABS_MT events are recognized as part of a contact
+packet. Since these events are ignored by current single-touch (ST)
+applications, the MT protocol can be implemented on top of the ST protocol
+in an existing driver.
+
+Drivers for type A devices separate contact packets by calling
+input_mt_sync() at the end of each packet. This generates a SYN_MT_REPORT
+event, which instructs the receiver to accept the data for the current
+contact and prepare to receive another.
+
+Drivers for type B devices separate contact packets by calling
+input_mt_slot(), with a slot as argument, at the beginning of each packet.
+This generates an ABS_MT_SLOT event, which instructs the receiver to
+prepare for updates of the given slot.
+
+All drivers mark the end of a multi-touch transfer by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new set
+of events/packets.
+
+The main difference between the stateless type A protocol and the stateful
+type B slot protocol lies in the usage of identifiable contacts to reduce
+the amount of data sent to userspace. The slot protocol requires the use of
+the ABS_MT_TRACKING_ID, either provided by the hardware or computed from
+the raw data [5].
+
+For type A devices, the kernel driver should generate an arbitrary
+enumeration of the full set of anonymous contacts currently on the
+surface. The order in which the packets appear in the event stream is not
+important.  Event filtering and finger tracking is left to user space [3].
+
+For type B devices, the kernel driver should associate a slot with each
+identified contact, and use that slot to propagate changes for the contact.
+Creation, replacement and destruction of contacts is achieved by modifying
+the ABS_MT_TRACKING_ID of the associated slot.  A non-negative tracking id
+is interpreted as a contact, and the value -1 denotes an unused slot.  A
+tracking id not previously present is considered new, and a tracking id no
+longer present is considered removed.  Since only changes are propagated,
+the full state of each initiated contact has to reside in the receiving
+end.  Upon receiving an MT event, one simply updates the appropriate
+attribute of the current slot.
+
+
+Protocol Example A
+------------------
+
+Here is what a minimal event sequence for a two-contact touch would look
+like for a type A device:
+
+   ABS_MT_POSITION_X x[0]
+   ABS_MT_POSITION_Y y[0]
+   SYN_MT_REPORT
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_MT_REPORT
+   SYN_REPORT
 
+The sequence after moving one of the contacts looks exactly the same; the
+raw data for all present contacts are sent between every synchronization
+with SYN_REPORT.
 
-Usage
------
+Here is the sequence after lifting the first contact:
+
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_MT_REPORT
+   SYN_REPORT
+
+And here is the sequence after lifting the second contact:
+
+   SYN_MT_REPORT
+   SYN_REPORT
+
+If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
+ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
+last SYN_REPORT will be dropped by the input core, resulting in no
+zero-contact event reaching userland.
 
-Anonymous finger details are sent sequentially as separate packets of ABS
-events. Only the ABS_MT events are recognized as part of a finger
-packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. This instructs the
-receiver to accept the data for the current finger and prepare to receive
-another. The end of a multi-touch transfer is marked by calling the usual
-input_sync() function. This instructs the receiver to act upon events
-accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
-set of events/packets.
+
+Protocol Example B
+------------------
+
+Here is what a minimal event sequence for a two-contact touch would look
+like for a type B device:
+
+   ABS_MT_SLOT 0
+   ABS_MT_TRACKING_ID 45
+   ABS_MT_POSITION_X x[0]
+   ABS_MT_POSITION_Y y[0]
+   ABS_MT_SLOT 1
+   ABS_MT_TRACKING_ID 46
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_REPORT
+
+Here is the sequence after moving contact 45 in the x direction:
+
+   ABS_MT_SLOT 0
+   ABS_MT_POSITION_X x[0]
+   SYN_REPORT
+
+Here is the sequence after lifting the contact in slot 0:
+
+   ABS_MT_TRACKING_ID -1
+   SYN_REPORT
+
+The slot being modified is already 0, so the ABS_MT_SLOT is omitted.  The
+message removes the association of slot 0 with contact 45, thereby
+destroying contact 45 and freeing slot 0 to be reused for another contact.
+
+Finally, here is the sequence after lifting the second contact:
+
+   ABS_MT_SLOT 1
+   ABS_MT_TRACKING_ID -1
+   SYN_REPORT
+
+
+Event Usage
+-----------
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
 minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
-allows for multiple fingers to be tracked.  If the device supports it, the
+allows for multiple contacts to be tracked.  If the device supports it, the
 ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the contact area and approaching finger, respectively.
+of the contact area and approaching contact, respectively.
 
 The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
 looking through a window at someone gently holding a finger against the
@@ -41,56 +159,26 @@ ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
 ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
 against the glass. The inner region will increase, and in general, the
 ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
-unity, is related to the finger pressure. For pressure-based devices,
+unity, is related to the contact pressure. For pressure-based devices,
 ABS_MT_PRESSURE may be used to provide the pressure on the contact area
 instead.
 
-In addition to the MAJOR parameters, the oval shape of the finger can be
+In addition to the MAJOR parameters, the oval shape of the contact can be
 described by adding the MINOR parameters, such that MAJOR and MINOR are the
 major and minor axis of an ellipse. Finally, the orientation of the oval
 shape can be describe with the ORIENTATION parameter.
 
 The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
-finger or a pen or something else.  Devices with more granular information
+contact or a pen or something else.  Devices with more granular information
 may specify general shapes as blobs, i.e., as a sequence of rectangular
 shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
 that currently support it, the ABS_MT_TRACKING_ID event may be used to
-report finger tracking from hardware [5].
+report contact tracking from hardware [5].
 
-Here is what a minimal event sequence for a two-finger touch would look
-like:
-
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   SYN_REPORT
-
-Here is the sequence after lifting one of the fingers:
-
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   SYN_REPORT
-
-And here is the sequence after lifting the remaining finger:
-
-   SYN_MT_REPORT
-   SYN_REPORT
-
-If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
-ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
-last SYN_REPORT will be dropped by the input core, resulting in no
-zero-finger event reaching userland.
 
 Event Semantics
 ---------------
 
-The word "contact" is used to describe a tool which is in direct contact
-with the surface. A finger, a pen or a rubber all classify as contacts.
-
 ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
@@ -157,15 +245,16 @@ MT_TOOL_PEN [2].
 ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
-contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level trackingID [5]. Most kernel drivers will not have blob
-capability, and can safely omit the event.
+contact. This is a low-level anonymous grouping for type A devices, and
+should not be confused with the high-level trackingID [5]. Most type A
+devices do not have blob capability, so drivers can safely omit this event.
 
 ABS_MT_TRACKING_ID
 
 The TRACKING_ID identifies an initiated contact throughout its life cycle
-[5]. There are currently only a few devices that support it, so this event
-should normally be omitted.
+[5]. This event is mandatory for type B devices. The value range of the
+TRACKING_ID should be large enough to ensure unique identification of a
+contact maintained over an extended period of time.
 
 
 Event Computation
@@ -192,20 +281,11 @@ finger along the X axis (1).
 Finger Tracking
 ---------------
 
-The kernel driver should generate an arbitrary enumeration of the set of
-anonymous contacts currently on the surface. The order in which the packets
-appear in the event stream is not important.
-
 The process of finger tracking, i.e., to assign a unique trackingID to each
-initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the trackingID stays the same and
-unique until the contact vanishes (when the finger leaves the surface). The
-problem of assigning a set of anonymous fingers to a set of identified
-fingers is a euclidian bipartite matching problem at each event update, and
-relies on a sufficiently rapid update rate.
-
-There are a few devices that support trackingID in hardware. User space can
-make use of these native identifiers to reduce bandwidth and cpu usage.
+initiated contact on the surface, is a Euclidian Bipartite Matching
+problem.  At each event synchronization, the set of actual contacts is
+matched to the set of contacts from the previous synchronization. A full
+implementation can be found in [3].
 
 
 Gestures

arch/arm/plat-samsung/include/plat/keypad.h

+/*
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+#define SAMSUNG_MAX_ROWS	8
+#define SAMSUNG_MAX_COLS	8
+
+/**
+ * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
+ * @keymap_data: pointer to &matrix_keymap_data.
+ * @rows: number of keypad row supported.
+ * @cols: number of keypad col supported.
+ * @no_autorepeat: disable key autorepeat.
+ * @wakeup: controls whether the device should be set up as wakeup source.
+ * @cfg_gpio: configure the GPIO.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio.
+ */
+struct samsung_keypad_platdata {
+	const struct matrix_keymap_data	*keymap_data;
+	unsigned int rows;
+	unsigned int cols;
+	bool no_autorepeat;
+	bool wakeup;
+
+	void (*cfg_gpio)(unsigned int rows, unsigned int cols);
+};
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */

drivers/char/keyboard.c

@@ -1315,10 +1315,14 @@ static bool kbd_match(struct input_handler *handler, struct input_dev *dev)
 	if (test_bit(EV_SND, dev->evbit))
 		return true;
 
-	if (test_bit(EV_KEY, dev->evbit))
+	if (test_bit(EV_KEY, dev->evbit)) {
 		for (i = KEY_RESERVED; i < BTN_MISC; i++)
 			if (test_bit(i, dev->keybit))
 				return true;
+		for (i = KEY_BRL_DOT1; i <= KEY_BRL_DOT10; i++)
+			if (test_bit(i, dev->keybit))
+				return true;
+	}
 
 	return false;
 }

drivers/hid/hid-core.c

@@ -1568,6 +1568,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },

drivers/hid/hid-ids.h

@@ -197,6 +197,7 @@
 
 #define USB_VENDOR_ID_ETT		0x0664
 #define USB_DEVICE_ID_TC5UH		0x0309
+#define USB_DEVICE_ID_TC4UM		0x0306
 
 #define USB_VENDOR_ID_EZKEY 		0x0518
 #define USB_DEVICE_ID_BTC_8193		0x0002

drivers/hid/hid-input.c

@@ -534,6 +534,9 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			input_set_abs_params(input, usage->code, a, b, (b - a) >> 8, (b - a) >> 4);
 		else	input_set_abs_params(input, usage->code, a, b, 0, 0);
 
+		/* use a larger default input buffer for MT devices */
+		if (usage->code == ABS_MT_POSITION_X && input->hint_events_per_packet == 0)
+			input_set_events_per_packet(input, 60);
 	}
 
 	if (usage->type == EV_ABS &&

drivers/input/evdev.c

@@ -10,7 +10,8 @@
 
 #define EVDEV_MINOR_BASE	64
 #define EVDEV_MINORS		32
-#define EVDEV_BUFFER_SIZE	64
+#define EVDEV_MIN_BUFFER_SIZE	64U
+#define EVDEV_BUF_PACKETS	8
 
 #include <linux/poll.h>
 #include <linux/sched.h>
@@ -23,7 +24,6 @@
 #include "input-compat.h"
 
 struct evdev {
-	int exist;
 	int open;
 	int minor;
 	struct input_handle handle;
@@ -33,16 +33,18 @@ struct evdev {
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	bool exist;
 };
 
 struct evdev_client {
-	struct input_event buffer[EVDEV_BUFFER_SIZE];
 	int head;
 	int tail;
 	spinlock_t buffer_lock; /* protects access to buffer, head and tail */
 	struct fasync_struct *fasync;
 	struct evdev *evdev;
 	struct list_head node;
+	int bufsize;
+	struct input_event buffer[];
 };
 
 static struct evdev *evdev_table[EVDEV_MINORS];
@@ -52,11 +54,15 @@ static void evdev_pass_event(struct evdev_client *client,
 			     struct input_event *event)
 {
 	/*
-	 * Interrupts are disabled, just acquire the lock
+	 * Interrupts are disabled, just acquire the lock.
+	 * Make sure we don't leave with the client buffer
+	 * "empty" by having client->head == client->tail.
 	 */
 	spin_lock(&client->buffer_lock);
-	client->buffer[client->head++] = *event;
-	client->head &= EVDEV_BUFFER_SIZE - 1;
+	do {
+		client->buffer[client->head++] = *event;
+		client->head &= client->bufsize - 1;
+	} while (client->head == client->tail);
 	spin_unlock(&client->buffer_lock);
 
 	if (event->type == EV_SYN)
@@ -242,11 +248,21 @@ static int evdev_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static unsigned int evdev_compute_buffer_size(struct input_dev *dev)
+{
+	unsigned int n_events =
+		max(dev->hint_events_per_packet * EVDEV_BUF_PACKETS,
+		    EVDEV_MIN_BUFFER_SIZE);
+
+	return roundup_pow_of_two(n_events);
+}
+
 static int evdev_open(struct inode *inode, struct file *file)
 {
 	struct evdev *evdev;
 	struct evdev_client *client;
 	int i = iminor(inode) - EVDEV_MINOR_BASE;
+	unsigned int bufsize;
 	int error;
 
 	if (i >= EVDEV_MINORS)
@@ -263,12 +279,17 @@ static int evdev_open(struct inode *inode, struct file *file)
 	if (!evdev)
 		return -ENODEV;
 
-	client = kzalloc(sizeof(struct evdev_client), GFP_KERNEL);
+	bufsize = evdev_compute_buffer_size(evdev->handle.dev);
+
+	client = kzalloc(sizeof(struct evdev_client) +
+				bufsize * sizeof(struct input_event),
+			 GFP_KERNEL);
 	if (!client) {
 		error = -ENOMEM;
 		goto err_put_evdev;
 	}
 
+	client->bufsize = bufsize;
 	spin_lock_init(&client->buffer_lock);
 	client->evdev = evdev;
 	evdev_attach_client(evdev, client);
@@ -334,7 +355,7 @@ static int evdev_fetch_next_event(struct evdev_client *client,
 	have_event = client->head != client->tail;
 	if (have_event) {
 		*event = client->buffer[client->tail++];
-		client->tail &= EVDEV_BUFFER_SIZE - 1;
+		client->tail &= client->bufsize - 1;
 	}
 
 	spin_unlock_irq(&client->buffer_lock);
@@ -382,10 +403,15 @@ static unsigned int evdev_poll(struct file *file, poll_table *wait)
 {
 	struct evdev_client *client = file->private_data;
 	struct evdev *evdev = client->evdev;
+	unsigned int mask;
 
 	poll_wait(file, &evdev->wait, wait);
-	return ((client->head == client->tail) ? 0 : (POLLIN | POLLRDNORM)) |
-		(evdev->exist ? 0 : (POLLHUP | POLLERR));
+
+	mask = evdev->exist ? POLLOUT | POLLWRNORM : POLLHUP | POLLERR;
+	if (client->head != client->tail)
+		mask |= POLLIN | POLLRDNORM;
+
+	return mask;
 }
 
 #ifdef CONFIG_COMPAT
@@ -665,6 +691,10 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 								  sizeof(struct input_absinfo))))
 					return -EFAULT;
 
+				/* We can't change number of reserved MT slots */
+				if (t == ABS_MT_SLOT)
+					return -EINVAL;
+
 				/*
 				 * Take event lock to ensure that we are not
 				 * changing device parameters in the middle
@@ -768,7 +798,7 @@ static void evdev_remove_chrdev(struct evdev *evdev)
 static void evdev_mark_dead(struct evdev *evdev)
 {
 	mutex_lock(&evdev->mutex);
-	evdev->exist = 0;
+	evdev->exist = false;
 	mutex_unlock(&evdev->mutex);
 }
 
@@ -817,7 +847,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 	init_waitqueue_head(&evdev->wait);
 
 	dev_set_name(&evdev->dev, "event%d", minor);
-	evdev->exist = 1;
+	evdev->exist = true;
 	evdev->minor = minor;
 
 	evdev->handle.dev = input_get_device(dev);

drivers/input/input.c

@@ -33,25 +33,6 @@ MODULE_LICENSE("GPL");
 
 #define INPUT_DEVICES	256
 
-/*
- * EV_ABS events which should not be cached are listed here.
- */
-static unsigned int input_abs_bypass_init_data[] __initdata = {
-	ABS_MT_TOUCH_MAJOR,
-	ABS_MT_TOUCH_MINOR,
-	ABS_MT_WIDTH_MAJOR,
-	ABS_MT_WIDTH_MINOR,
-	ABS_MT_ORIENTATION,
-	ABS_MT_POSITION_X,
-	ABS_MT_POSITION_Y,
-	ABS_MT_TOOL_TYPE,
-	ABS_MT_BLOB_ID,
-	ABS_MT_TRACKING_ID,
-	ABS_MT_PRESSURE,
-	0
-};
-static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
-
 static LIST_HEAD(input_dev_list);
 static LIST_HEAD(input_handler_list);
 
@@ -181,6 +162,56 @@ static void input_stop_autorepeat(struct input_dev *dev)
 #define INPUT_PASS_TO_DEVICE	2
 #define INPUT_PASS_TO_ALL	(INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE)
 
+static int input_handle_abs_event(struct input_dev *dev,
+				  unsigned int code, int *pval)
+{
+	bool is_mt_event;
+	int *pold;
+
+	if (code == ABS_MT_SLOT) {
+		/*
+		 * "Stage" the event; we'll flush it later, when we
+		 * get actiual touch data.
+		 */
+		if (*pval >= 0 && *pval < dev->mtsize)
+			dev->slot = *pval;
+
+		return INPUT_IGNORE_EVENT;
+	}
+
+	is_mt_event = code >= ABS_MT_FIRST && code <= ABS_MT_LAST;
+
+	if (!is_mt_event) {
+		pold = &dev->abs[code];
+	} else if (dev->mt) {
+		struct input_mt_slot *mtslot = &dev->mt[dev->slot];
+		pold = &mtslot->abs[code - ABS_MT_FIRST];
+	} else {
+		/*
+		 * Bypass filtering for multitouch events when
+		 * not employing slots.
+		 */
+		pold = NULL;
+	}
+
+	if (pold) {
+		*pval = input_defuzz_abs_event(*pval, *pold,
+						dev->absfuzz[code]);
+		if (*pold == *pval)
+			return INPUT_IGNORE_EVENT;
+
+		*pold = *pval;
+	}
+
+	/* Flush pending "slot" event */
+	if (is_mt_event && dev->slot != dev->abs[ABS_MT_SLOT]) {
+		dev->abs[ABS_MT_SLOT] = dev->slot;
+		input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
+	}
+
+	return INPUT_PASS_TO_HANDLERS;
+}
+
 static void input_handle_event(struct input_dev *dev,
 			       unsigned int type, unsigned int code, int value)
 {
@@ -196,12 +227,12 @@ static void input_handle_event(struct input_dev *dev,
 
 		case SYN_REPORT:
 			if (!dev->sync) {
-				dev->sync = 1;
+				dev->sync = true;
 				disposition = INPUT_PASS_TO_HANDLERS;
 			}
 			break;
 		case SYN_MT_REPORT:
-			dev->sync = 0;
+			dev->sync = false;
 			disposition = INPUT_PASS_TO_HANDLERS;
 			break;
 		}
@@ -233,21 +264,9 @@ static void input_handle_event(struct input_dev *dev,
 		break;
 
 	case EV_ABS:
-		if (is_event_supported(code, dev->absbit, ABS_MAX)) {
-
-			if (test_bit(code, input_abs_bypass)) {
-				disposition = INPUT_PASS_TO_HANDLERS;
-				break;
-			}
+		if (is_event_supported(code, dev->absbit, ABS_MAX))
+			disposition = input_handle_abs_event(dev, code, &value);
 
-			value = input_defuzz_abs_event(value,
-					dev->abs[code], dev->absfuzz[code]);
-
-			if (dev->abs[code] != value) {
-				dev->abs[code] = value;
-				disposition = INPUT_PASS_TO_HANDLERS;
-			}
-		}
 		break;
 
 	case EV_REL:
@@ -298,7 +317,7 @@ static void input_handle_event(struct input_dev *dev,
 	}
 
 	if (disposition != INPUT_IGNORE_EVENT && type != EV_SYN)
-		dev->sync = 0;
+		dev->sync = false;
 
 	if ((disposition & INPUT_PASS_TO_DEVICE) && dev->event)
 		dev->event(dev, type, code, value);
@@ -527,13 +546,31 @@ void input_close_device(struct input_handle *handle)
 }
 EXPORT_SYMBOL(input_close_device);
 
+/*
+ * Simulate keyup events for all keys that are marked as pressed.
+ * The function must be called with dev->event_lock held.
+ */
+static void input_dev_release_keys(struct input_dev *dev)
+{
+	int code;
+
+	if (is_event_supported(EV_KEY, dev->evbit, EV_MAX)) {
+		for (code = 0; code <= KEY_MAX; code++) {
+			if (is_event_supported(code, dev->keybit, KEY_MAX) &&
+			    __test_and_clear_bit(code, dev->key)) {
+				input_pass_event(dev, EV_KEY, code, 0);
+			}
+		}
+		input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+	}
+}
+
 /*
  * Prepare device for unregistering
  */
 static void input_disconnect_device(struct input_dev *dev)
 {
 	struct input_handle *handle;
-	int code;
 
 	/*
 	 * Mark device as going away. Note that we take dev->mutex here
@@ -552,15 +589,7 @@ static void input_disconnect_device(struct input_dev *dev)
 	 * generate events even after we done here but they will not
 	 * reach any handlers.
 	 */
-	if (is_event_supported(EV_KEY, dev->evbit, EV_MAX)) {
-		for (code = 0; code <= KEY_MAX; code++) {
-			if (is_event_supported(code, dev->keybit, KEY_MAX) &&
-			    __test_and_clear_bit(code, dev->key)) {
-				input_pass_event(dev, EV_KEY, code, 0);
-			}
-		}
-		input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
-	}
+	input_dev_release_keys(dev);
 
 	list_for_each_entry(handle, &dev->h_list, d_node)
 		handle->open = 0;
@@ -684,7 +713,7 @@ int input_set_keycode(struct input_dev *dev,
 		      unsigned int scancode, unsigned int keycode)
 {
 	unsigned long flags;
-	int old_keycode;
+	unsigned int old_keycode;
 	int retval;
 
 	if (keycode > KEY_MAX)
@@ -1278,6 +1307,7 @@ static void input_dev_release(struct device *device)
 	struct input_dev *dev = to_input_dev(device);
 
 	input_ff_destroy(dev);
+	input_mt_destroy_slots(dev);
 	kfree(dev);
 
 	module_put(THIS_MODULE);
@@ -1433,6 +1463,15 @@ static int input_dev_resume(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 	input_dev_reset(input_dev, true);
+
+	/*
+	 * Keys that have been pressed at suspend time are unlikely
+	 * to be still pressed when we resume.
+	 */
+	spin_lock_irq(&input_dev->event_lock);
+	input_dev_release_keys(input_dev);
+	spin_unlock_irq(&input_dev->event_lock);
+
 	mutex_unlock(&input_dev->mutex);
 
 	return 0;
@@ -1517,6 +1556,45 @@ void input_free_device(struct input_dev *dev)
 }
 EXPORT_SYMBOL(input_free_device);
 
+/**
+ * input_mt_create_slots() - create MT input slots
+ * @dev: input device supporting MT events and finger tracking
+ * @num_slots: number of slots used by the device
+ *
+ * This function allocates all necessary memory for MT slot handling
+ * in the input device, and adds ABS_MT_SLOT to the device capabilities.
+ */
+int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots)
+{
+	if (!num_slots)
+		return 0;
+
+	dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
+	if (!dev->mt)
+		return -ENOMEM;
+
+	dev->mtsize = num_slots;
+	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(input_mt_create_slots);
+
+/**
+ * input_mt_destroy_slots() - frees the MT slots of the input device
+ * @dev: input device with allocated MT slots
+ *
+ * This function is only needed in error path as the input core will
+ * automatically free the MT slots when the device is destroyed.
+ */
+void input_mt_destroy_slots(struct input_dev *dev)
+{
+	kfree(dev->mt);
+	dev->mt = NULL;
+	dev->mtsize = 0;
+}
+EXPORT_SYMBOL(input_mt_destroy_slots);
+
 /**
  * input_set_capability - mark device as capable of a certain event
  * @dev: device that is capable of emitting or accepting event
@@ -1926,20 +2004,10 @@ static const struct file_operations input_fops = {
 	.open = input_open_file,
 };
 
-static void __init input_init_abs_bypass(void)
-{
-	const unsigned int *p;
-
-	for (p = input_abs_bypass_init_data; *p; p++)
-		input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
-}
-
 static int __init input_init(void)
 {
 	int err;
 
-	input_init_abs_bypass();
-
 	err = class_register(&input_class);
 	if (err) {
 		printk(KERN_ERR "input: unable to register input_dev class\n");

drivers/input/joydev.c

@@ -37,7 +37,6 @@ MODULE_LICENSE("GPL");
 #define JOYDEV_BUFFER_SIZE	64
 
 struct joydev {
-	int exist;
 	int open;
 	int minor;
 	struct input_handle handle;
@@ -46,6 +45,7 @@ struct joydev {
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	bool exist;
 
 	struct js_corr corr[ABS_CNT];
 	struct JS_DATA_SAVE_TYPE glue;
@@ -760,7 +760,7 @@ static void joydev_remove_chrdev(struct joydev *joydev)
 static void joydev_mark_dead(struct joydev *joydev)
 {
 	mutex_lock(&joydev->mutex);
-	joydev->exist = 0;
+	joydev->exist = false;
 	mutex_unlock(&joydev->mutex);
 }
 
@@ -817,10 +817,9 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 	init_waitqueue_head(&joydev->wait);
 
 	dev_set_name(&joydev->dev, "js%d", minor);
-	joydev->exist = 1;
+	joydev->exist = true;
 	joydev->minor = minor;
 
-	joydev->exist = 1;
 	joydev->handle.dev = input_get_device(dev);
 	joydev->handle.name = dev_name(&joydev->dev);
 	joydev->handle.handler = handler;

drivers/input/joystick/xpad.c

@@ -9,6 +9,7 @@
  *               2005 Dominic Cerquetti <binary1230@yahoo.com>
  *               2006 Adam Buchbinder <adam.buchbinder@gmail.com>
  *               2007 Jan Kratochvil <honza@jikos.cz>
+ *               2010 Christoph Fritz <chf.fritz@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -88,6 +89,9 @@
    but we map them to axes when possible to simplify things */
 #define MAP_DPAD_TO_BUTTONS		(1 << 0)
 #define MAP_TRIGGERS_TO_BUTTONS		(1 << 1)
+#define MAP_STICKS_TO_NULL		(1 << 2)
+#define DANCEPAD_MAP_CONFIG	(MAP_DPAD_TO_BUTTONS |			\
+				MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)
 
 #define XTYPE_XBOX        0
 #define XTYPE_XBOX360     1
@@ -102,6 +106,10 @@ static int triggers_to_buttons;
 module_param(triggers_to_buttons, bool, S_IRUGO);
 MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");
 
+static int sticks_to_null;
+module_param(sticks_to_null, bool, S_IRUGO);
+MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
+
 static const struct xpad_device {
 	u16 idVendor;
 	u16 idProduct;
@@ -114,7 +122,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
-	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
 	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
@@ -159,7 +167,7 @@ static const struct xpad_device {
 /* buttons shared with xbox and xbox360 */
 static const signed short xpad_common_btn[] = {
 	BTN_A, BTN_B, BTN_X, BTN_Y,			/* "analog" buttons */
-	BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR,	/* start/back/sticks */
+	BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR,	/* start/back/sticks */
 	-1						/* terminating entry */
 };
 
@@ -169,10 +177,10 @@ static const signed short xpad_btn[] = {
 	-1			/* terminating entry */
 };
 
-/* used when dpad is mapped to nuttons */
+/* used when dpad is mapped to buttons */
 static const signed short xpad_btn_pad[] = {
-	BTN_LEFT, BTN_RIGHT,		/* d-pad left, right */
-	BTN_0, BTN_1,			/* d-pad up, down (XXX names??) */
+	BTN_TRIGGER_HAPPY1, BTN_TRIGGER_HAPPY2,		/* d-pad left, right */
+	BTN_TRIGGER_HAPPY3, BTN_TRIGGER_HAPPY4,		/* d-pad up, down */
 	-1				/* terminating entry */
 };
 
@@ -280,17 +288,19 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 {
 	struct input_dev *dev = xpad->dev;
 
-	/* left stick */
-	input_report_abs(dev, ABS_X,
-			 (__s16) le16_to_cpup((__le16 *)(data + 12)));
-	input_report_abs(dev, ABS_Y,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 14)));
-
-	/* right stick */
-	input_report_abs(dev, ABS_RX,
-			 (__s16) le16_to_cpup((__le16 *)(data + 16)));
-	input_report_abs(dev, ABS_RY,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
+	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+		/* left stick */
+		input_report_abs(dev, ABS_X,
+				 (__s16) le16_to_cpup((__le16 *)(data + 12)));
+		input_report_abs(dev, ABS_Y,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 14)));
+
+		/* right stick */
+		input_report_abs(dev, ABS_RX,
+				 (__s16) le16_to_cpup((__le16 *)(data + 16)));
+		input_report_abs(dev, ABS_RY,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
+	}
 
 	/* triggers left/right */
 	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
@@ -303,10 +313,11 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 
 	/* digital pad */
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
-		input_report_key(dev, BTN_LEFT,  data[2] & 0x04);
-		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
-		input_report_key(dev, BTN_0,     data[2] & 0x01); /* up */
-		input_report_key(dev, BTN_1,     data[2] & 0x02); /* down */
+		/* dpad as buttons (left, right, up, down) */
+		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & 0x04);
+		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
+		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
+		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
 	} else {
 		input_report_abs(dev, ABS_HAT0X,
 				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
@@ -316,7 +327,7 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 
 	/* start/back buttons and stick press left/right */
 	input_report_key(dev, BTN_START,  data[2] & 0x10);
-	input_report_key(dev, BTN_BACK,   data[2] & 0x20);
+	input_report_key(dev, BTN_SELECT, data[2] & 0x20);
 	input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
 	input_report_key(dev, BTN_THUMBR, data[2] & 0x80);
 
@@ -350,11 +361,11 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 
 	/* digital pad */
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
-		/* dpad as buttons (right, left, down, up) */
-		input_report_key(dev, BTN_LEFT, data[2] & 0x04);
-		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
-		input_report_key(dev, BTN_0, data[2] & 0x01);	/* up */
-		input_report_key(dev, BTN_1, data[2] & 0x02);	/* down */
+		/* dpad as buttons (left, right, up, down) */
+		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & 0x04);
+		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
+		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
+		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
 	} else {
 		input_report_abs(dev, ABS_HAT0X,
 				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
@@ -364,7 +375,7 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 
 	/* start/back buttons */
 	input_report_key(dev, BTN_START,  data[2] & 0x10);
-	input_report_key(dev, BTN_BACK,   data[2] & 0x20);
+	input_report_key(dev, BTN_SELECT, data[2] & 0x20);
 
 	/* stick press left/right */
 	input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
@@ -379,17 +390,19 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 	input_report_key(dev, BTN_TR,	data[3] & 0x02);
 	input_report_key(dev, BTN_MODE,	data[3] & 0x04);
 
-	/* left stick */
-	input_report_abs(dev, ABS_X,
-			 (__s16) le16_to_cpup((__le16 *)(data + 6)));
-	input_report_abs(dev, ABS_Y,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 8)));
-
-	/* right stick */
-	input_report_abs(dev, ABS_RX,
-			 (__s16) le16_to_cpup((__le16 *)(data + 10)));
-	input_report_abs(dev, ABS_RY,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+		/* left stick */
+		input_report_abs(dev, ABS_X,
+				 (__s16) le16_to_cpup((__le16 *)(data + 6)));
+		input_report_abs(dev, ABS_Y,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 8)));
+
+		/* right stick */
+		input_report_abs(dev, ABS_RX,
+				 (__s16) le16_to_cpup((__le16 *)(data + 10)));
+		input_report_abs(dev, ABS_RY,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+	}
 
 	/* triggers left/right */
 	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
@@ -815,6 +828,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 			xpad->mapping |= MAP_DPAD_TO_BUTTONS;
 		if (triggers_to_buttons)
 			xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS;
+		if (sticks_to_null)
+			xpad->mapping |= MAP_STICKS_TO_NULL;
 	}
 
 	xpad->dev = input_dev;
@@ -831,16 +846,20 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	input_dev->open = xpad_open;
 	input_dev->close = xpad_close;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+
+	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+		input_dev->evbit[0] |= BIT_MASK(EV_ABS);
+		/* set up axes */
+		for (i = 0; xpad_abs[i] >= 0; i++)
+			xpad_set_up_abs(input_dev, xpad_abs[i]);
+	}
 
-	/* set up standard buttons and axes */
+	/* set up standard buttons */
 	for (i = 0; xpad_common_btn[i] >= 0; i++)
 		__set_bit(xpad_common_btn[i], input_dev->keybit);
 
-	for (i = 0; xpad_abs[i] >= 0; i++)
-		xpad_set_up_abs(input_dev, xpad_abs[i]);
-
-	/* Now set up model-specific ones */
+	/* set up model-specific ones */
 	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
 		for (i = 0; xpad360_btn[i] >= 0; i++)
 			__set_bit(xpad360_btn[i], input_dev->keybit);

drivers/input/keyboard/Kconfig

@@ -297,6 +297,18 @@ config KEYBOARD_MAX7359
 	  To compile this driver as a module, choose M here: the
 	  module will be called max7359_keypad.
 
+config KEYBOARD_MCS
+	tristate "MELFAS MCS Touchkey"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcs_touchkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
@@ -342,6 +354,15 @@ config KEYBOARD_PXA930_ROTARY
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa930_rotary.
 
+config KEYBOARD_SAMSUNG
+	tristate "Samsung keypad support"
+	depends on SAMSUNG_DEV_KEYPAD
+	help
+	  Say Y here if you want to use the Samsung keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called samsung-keypad.
+
 config KEYBOARD_STOWAWAY
 	tristate "Stowaway keyboard"
 	select SERIO

drivers/input/keyboard/Makefile

@@ -26,12 +26,14 @@ obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
+obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
+obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o

drivers/input/keyboard/adp5588-keys.c

@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 #include <linux/slab.h>
 
 #include <linux/i2c/adp5588.h>
@@ -54,6 +55,10 @@
 
 #define KEYP_MAX_EVENT		10
 
+#define MAXGPIO			18
+#define ADP_BANK(offs)		((offs) >> 3)
+#define ADP_BIT(offs)		(1u << ((offs) & 0x7))
+
 /*
  * Early pre 4.0 Silicon required to delay readout by at least 25ms,
  * since the Event Counter Register updated 25ms after the interrupt
@@ -67,6 +72,16 @@ struct adp5588_kpad {
 	struct delayed_work work;
 	unsigned long delay;
 	unsigned short keycode[ADP5588_KEYMAPSIZE];
+	const struct adp5588_gpi_map *gpimap;
+	unsigned short gpimapsize;
+#ifdef CONFIG_GPIOLIB
+	unsigned char gpiomap[MAXGPIO];
+	bool export_gpio;
+	struct gpio_chip gc;
+	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
+	u8 dat_out[3];
+	u8 dir[3];
+#endif
 };
 
 static int adp5588_read(struct i2c_client *client, u8 reg)
@@ -84,12 +99,222 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
 	return i2c_smbus_write_byte_data(client, reg, val);
 }
 
+#ifdef CONFIG_GPIOLIB
+static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+
+	return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
+}
+
+static void adp5588_gpio_set_value(struct gpio_chip *chip,
+				   unsigned off, int val)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+
+	mutex_lock(&kpad->gpio_lock);
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+			   kpad->dat_out[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+}
+
+static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] &= ~bit;
+	ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int adp5588_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned off, int val)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] |= bit;
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+				 kpad->dat_out[bank]);
+	ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
+				 kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
+				const struct adp5588_kpad_platform_data *pdata)
+{
+	bool pin_used[MAXGPIO];
+	int n_unused = 0;
+	int i;
+
+	memset(pin_used, 0, sizeof(pin_used));
+
+	for (i = 0; i < pdata->rows; i++)
+		pin_used[i] = true;
+
+	for (i = 0; i < pdata->cols; i++)
+		pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
+
+	for (i = 0; i < kpad->gpimapsize; i++)
+		pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
+
+	for (i = 0; i < MAXGPIO; i++)
+		if (!pin_used[i])
+			kpad->gpiomap[n_unused++] = i;
+
+	return n_unused;
+}
+
+static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int i, error;
+
+	if (!gpio_data)
+		return 0;
+
+	kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
+	if (kpad->gc.ngpio == 0) {
+		dev_info(dev, "No unused gpios left to export\n");
+		return 0;
+	}
+
+	kpad->export_gpio = true;
+
+	kpad->gc.direction_input = adp5588_gpio_direction_input;
+	kpad->gc.direction_output = adp5588_gpio_direction_output;
+	kpad->gc.get = adp5588_gpio_get_value;
+	kpad->gc.set = adp5588_gpio_set_value;
+	kpad->gc.can_sleep = 1;
+
+	kpad->gc.base = gpio_data->gpio_start;
+	kpad->gc.label = kpad->client->name;
+	kpad->gc.owner = THIS_MODULE;
+
+	mutex_init(&kpad->gpio_lock);
+
+	error = gpiochip_add(&kpad->gc);
+	if (error) {
+		dev_err(dev, "gpiochip_add failed, err: %d\n", error);
+		return error;
+	}
+
+	for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+		kpad->dat_out[i] = adp5588_read(kpad->client,
+						GPIO_DAT_OUT1 + i);
+		kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
+	}
+
+	if (gpio_data->setup) {
+		error = gpio_data->setup(kpad->client,
+					 kpad->gc.base, kpad->gc.ngpio,
+					 gpio_data->context);
+		if (error)
+			dev_warn(dev, "setup failed, %d\n", error);
+	}
+
+	return 0;
+}
+
+static void __devexit adp5588_gpio_remove(struct adp5588_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int error;
+
+	if (!kpad->export_gpio)
+		return;
+
+	if (gpio_data->teardown) {
+		error = gpio_data->teardown(kpad->client,
+					    kpad->gc.base, kpad->gc.ngpio,
+					    gpio_data->context);
+		if (error)
+			dev_warn(dev, "teardown failed %d\n", error);
+	}
+
+	error = gpiochip_remove(&kpad->gc);
+	if (error)
+		dev_warn(dev, "gpiochip_remove failed %d\n", error);
+}
+#else
+static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
+{
+	return 0;
+}
+
+static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
+{
+}
+#endif
+
+static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
+{
+	int i, j;
+
+	for (i = 0; i < ev_cnt; i++) {
+		int key = adp5588_read(kpad->client, Key_EVENTA + i);
+		int key_val = key & KEY_EV_MASK;
+
+		if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
+			for (j = 0; j < kpad->gpimapsize; j++) {
+				if (key_val == kpad->gpimap[j].pin) {
+					input_report_switch(kpad->input,
+							kpad->gpimap[j].sw_evt,
+							key & KEY_EV_PRESSED);
+					break;
+				}
+			}
+		} else {
+			input_report_key(kpad->input,
+					 kpad->keycode[key_val - 1],
+					 key & KEY_EV_PRESSED);
+		}
+	}
+}
+
 static void adp5588_work(struct work_struct *work)
 {
 	struct adp5588_kpad *kpad = container_of(work,
 						struct adp5588_kpad, work.work);
 	struct i2c_client *client = kpad->client;
-	int i, key, status, ev_cnt;
+	int status, ev_cnt;
 
 	status = adp5588_read(client, INT_STAT);
 
@@ -99,12 +324,7 @@ static void adp5588_work(struct work_struct *work)
 	if (status & KE_INT) {
 		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
 		if (ev_cnt) {
-			for (i = 0; i < ev_cnt; i++) {
-				key = adp5588_read(client, Key_EVENTA + i);
-				input_report_key(kpad->input,
-					kpad->keycode[(key & KEY_EV_MASK) - 1],
-					key & KEY_EV_PRESSED);
-			}
+			adp5588_report_events(kpad, ev_cnt);
 			input_sync(kpad->input);
 		}
 	}
@@ -128,8 +348,10 @@ static irqreturn_t adp5588_irq(int irq, void *handle)
 
 static int __devinit adp5588_setup(struct i2c_client *client)
 {
-	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 	int i, ret;
+	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
 
 	ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
 	ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
@@ -144,6 +366,32 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	for (i = 0; i < KEYP_MAX_EVENT; i++)
 		ret |= adp5588_read(client, Key_EVENTA);
 
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin <= GPI_PIN_ROW_END) {
+			evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
+		} else {
+			evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
+			evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
+		}
+	}
+
+	if (pdata->gpimapsize) {
+		ret |= adp5588_write(client, GPI_EM1, evt_mode1);
+		ret |= adp5588_write(client, GPI_EM2, evt_mode2);
+		ret |= adp5588_write(client, GPI_EM3, evt_mode3);
+	}
+
+	if (gpio_data) {
+		for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+			int pull_mask = gpio_data->pullup_dis_mask;
+
+			ret |= adp5588_write(client, GPIO_PULL1 + i,
+				(pull_mask >> (8 * i)) & 0xFF);
+		}
+	}
+
 	ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
 					OVR_FLOW_INT | K_LCK_INT |
 					GPI_INT | KE_INT); /* Status is W1C */
@@ -158,11 +406,49 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	return 0;
 }
 
+static void __devinit adp5588_report_switch_state(struct adp5588_kpad *kpad)
+{
+	int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
+	int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
+	int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
+	int gpi_stat_tmp, pin_loc;
+	int i;
+
+	for (i = 0; i < kpad->gpimapsize; i++) {
+		unsigned short pin = kpad->gpimap[i].pin;
+
+		if (pin <= GPI_PIN_ROW_END) {
+			gpi_stat_tmp = gpi_stat1;
+			pin_loc = pin - GPI_PIN_ROW_BASE;
+		} else if ((pin - GPI_PIN_COL_BASE) < 8) {
+			gpi_stat_tmp = gpi_stat2;
+			pin_loc = pin - GPI_PIN_COL_BASE;
+		} else {
+			gpi_stat_tmp = gpi_stat3;
+			pin_loc = pin - GPI_PIN_COL_BASE - 8;
+		}
+
+		if (gpi_stat_tmp < 0) {
+			dev_err(&kpad->client->dev,
+				"Can't read GPIO_DAT_STAT switch %d default to OFF\n",
+				pin);
+			gpi_stat_tmp = 0;
+		}
+
+		input_report_switch(kpad->input,
+				    kpad->gpimap[i].sw_evt,
+				    !(gpi_stat_tmp & (1 << pin_loc)));
+	}
+
+	input_sync(kpad->input);
+}
+
+
 static int __devinit adp5588_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct adp5588_kpad *kpad;
-	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
 	struct input_dev *input;
 	unsigned int revid;
 	int ret, i;
@@ -189,6 +475,37 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
+	if (!pdata->gpimap && pdata->gpimapsize) {
+		dev_err(&client->dev, "invalid gpimap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
+		dev_err(&client->dev, "invalid gpimapsize\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
+			dev_err(&client->dev, "invalid gpi pin data\n");
+			return -EINVAL;
+		}
+
+		if (pin <= GPI_PIN_ROW_END) {
+			if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
+				dev_err(&client->dev, "invalid gpi row data\n");
+				return -EINVAL;
+			}
+		} else {
+			if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
+				dev_err(&client->dev, "invalid gpi col data\n");
+				return -EINVAL;
+			}
+		}
+	}
+
 	if (!client->irq) {
 		dev_err(&client->dev, "no IRQ?\n");
 		return -EINVAL;
@@ -233,6 +550,9 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 	memcpy(kpad->keycode, pdata->keymap,
 		pdata->keymapsize * input->keycodesize);
 
+	kpad->gpimap = pdata->gpimap;
+	kpad->gpimapsize = pdata->gpimapsize;
+
 	/* setup input device */
 	__set_bit(EV_KEY, input->evbit);
 
@@ -243,6 +563,11 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 		__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
 	__clear_bit(KEY_RESERVED, input->keybit);
 
+	if (kpad->gpimapsize)
+		__set_bit(EV_SW, input->evbit);
+	for (i = 0; i < kpad->gpimapsize; i++)
+		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
+
 	error = input_register_device(input);
 	if (error) {
 		dev_err(&client->dev, "unable to register input device\n");
@@ -261,6 +586,13 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 	if (error)
 		goto err_free_irq;
 
+	if (kpad->gpimapsize)
+		adp5588_report_switch_state(kpad);
+
+	error = adp5588_gpio_add(kpad);
+	if (error)
+		goto err_free_irq;
+
 	device_init_wakeup(&client->dev, 1);
 	i2c_set_clientdata(client, kpad);
 
@@ -287,6 +619,7 @@ static int __devexit adp5588_remove(struct i2c_client *client)
 	free_irq(client->irq, kpad);
 	cancel_delayed_work_sync(&kpad->work);
 	input_unregister_device(kpad->input);
+	adp5588_gpio_remove(kpad);
 	kfree(kpad);
 
 	return 0;

drivers/input/keyboard/gpio_keys.c

@@ -31,6 +31,7 @@ struct gpio_button_data {
 	struct input_dev *input;
 	struct timer_list timer;
 	struct work_struct work;
+	int timer_debounce;	/* in msecs */
 	bool disabled;
 };
 
@@ -109,7 +110,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
 		 * Disable IRQ and possible debouncing timer.
 		 */
 		disable_irq(gpio_to_irq(bdata->button->gpio));
-		if (bdata->button->debounce_interval)
+		if (bdata->timer_debounce)
 			del_timer_sync(&bdata->timer);
 
 		bdata->disabled = true;
@@ -347,9 +348,9 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 
 	BUG_ON(irq != gpio_to_irq(button->gpio));
 
-	if (button->debounce_interval)
+	if (bdata->timer_debounce)
 		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(button->debounce_interval));
+			jiffies + msecs_to_jiffies(bdata->timer_debounce));
 	else
 		schedule_work(&bdata->work);
 
@@ -383,6 +384,14 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 		goto fail3;
 	}
 
+	if (button->debounce_interval) {
+		error = gpio_set_debounce(button->gpio,
+					  button->debounce_interval * 1000);
+		/* use timer if gpiolib doesn't provide debounce */
+		if (error < 0)
+			bdata->timer_debounce = button->debounce_interval;
+	}
+
 	irq = gpio_to_irq(button->gpio);
 	if (irq < 0) {
 		error = irq;
@@ -498,7 +507,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
  fail2:
 	while (--i >= 0) {
 		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
-		if (pdata->buttons[i].debounce_interval)
+		if (ddata->data[i].timer_debounce)
 			del_timer_sync(&ddata->data[i].timer);
 		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
@@ -526,7 +535,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	for (i = 0; i < pdata->nbuttons; i++) {
 		int irq = gpio_to_irq(pdata->buttons[i].gpio);
 		free_irq(irq, &ddata->data[i]);
-		if (pdata->buttons[i].debounce_interval)
+		if (ddata->data[i].timer_debounce)
 			del_timer_sync(&ddata->data[i].timer);
 		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);

drivers/input/keyboard/lm8323.c

@@ -642,6 +642,7 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 	struct lm8323_platform_data *pdata = client->dev.platform_data;
 	struct input_dev *idev;
 	struct lm8323_chip *lm;
+	int pwm;
 	int i, err;
 	unsigned long tmo;
 	u8 data[2];
@@ -710,8 +711,9 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 		goto fail1;
 	}
 
-	for (i = 0; i < LM8323_NUM_PWMS; i++) {
-		err = init_pwm(lm, i + 1, &client->dev, pdata->pwm_names[i]);
+	for (pwm = 0; pwm < LM8323_NUM_PWMS; pwm++) {
+		err = init_pwm(lm, pwm + 1, &client->dev,
+			       pdata->pwm_names[pwm]);
 		if (err < 0)
 			goto fail2;
 	}
@@ -764,9 +766,9 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 fail3:
 	device_remove_file(&client->dev, &dev_attr_disable_kp);
 fail2:
-	while (--i >= 0)
-		if (lm->pwm[i].enabled)
-			led_classdev_unregister(&lm->pwm[i].cdev);
+	while (--pwm >= 0)
+		if (lm->pwm[pwm].enabled)
+			led_classdev_unregister(&lm->pwm[pwm].cdev);
 fail1:
 	input_free_device(idev);
 	kfree(lm);

drivers/input/keyboard/matrix_keypad.c

@@ -37,6 +37,7 @@ struct matrix_keypad {
 	spinlock_t lock;
 	bool scan_pending;
 	bool stopped;
+	bool gpio_all_disabled;
 };
 
 /*
@@ -87,8 +88,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
 	int i;
 
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+	if (pdata->clustered_irq > 0)
+		enable_irq(pdata->clustered_irq);
+	else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+	}
 }
 
 static void disable_row_irqs(struct matrix_keypad *keypad)
@@ -96,8 +101,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
 	int i;
 
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+	if (pdata->clustered_irq > 0)
+		disable_irq_nosync(pdata->clustered_irq);
+	else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+	}
 }
 
 /*
@@ -216,45 +225,69 @@ static void matrix_keypad_stop(struct input_dev *dev)
 }
 
 #ifdef CONFIG_PM
-static int matrix_keypad_suspend(struct device *dev)
+static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int gpio;
 	int i;
 
-	matrix_keypad_stop(keypad->input_dev);
+	if (pdata->clustered_irq > 0) {
+		if (enable_irq_wake(pdata->clustered_irq) == 0)
+			keypad->gpio_all_disabled = true;
+	} else {
 
-	if (device_may_wakeup(&pdev->dev)) {
 		for (i = 0; i < pdata->num_row_gpios; i++) {
 			if (!test_bit(i, keypad->disabled_gpios)) {
-				unsigned int gpio = pdata->row_gpios[i];
+				gpio = pdata->row_gpios[i];
 
 				if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
 					__set_bit(i, keypad->disabled_gpios);
 			}
 		}
 	}
-
-	return 0;
 }
 
-static int matrix_keypad_resume(struct device *dev)
+static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int gpio;
 	int i;
 
-	if (device_may_wakeup(&pdev->dev)) {
+	if (pdata->clustered_irq > 0) {
+		if (keypad->gpio_all_disabled) {
+			disable_irq_wake(pdata->clustered_irq);
+			keypad->gpio_all_disabled = false;
+		}
+	} else {
 		for (i = 0; i < pdata->num_row_gpios; i++) {
 			if (test_and_clear_bit(i, keypad->disabled_gpios)) {
-				unsigned int gpio = pdata->row_gpios[i];
-
+				gpio = pdata->row_gpios[i];
 				disable_irq_wake(gpio_to_irq(gpio));
 			}
 		}
 	}
+}
+
+static int matrix_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	matrix_keypad_stop(keypad->input_dev);
+
+	if (device_may_wakeup(&pdev->dev))
+		matrix_keypad_enable_wakeup(keypad);
+
+	return 0;
+}
+
+static int matrix_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		matrix_keypad_disable_wakeup(keypad);
 
 	matrix_keypad_start(keypad->input_dev);
 
@@ -296,17 +329,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
 		gpio_direction_input(pdata->row_gpios[i]);
 	}
 
-	for (i = 0; i < pdata->num_row_gpios; i++) {
-		err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+	if (pdata->clustered_irq > 0) {
+		err = request_irq(pdata->clustered_irq,
 				matrix_keypad_interrupt,
-				IRQF_DISABLED |
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				pdata->clustered_irq_flags,
 				"matrix-keypad", keypad);
 		if (err) {
 			dev_err(&pdev->dev,
-				"Unable to acquire interrupt for GPIO line %i\n",
-				pdata->row_gpios[i]);
-			goto err_free_irqs;
+				"Unable to acquire clustered interrupt\n");
+			goto err_free_rows;
+		}
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++) {
+			err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+					matrix_keypad_interrupt,
+					IRQF_DISABLED |
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					"matrix-keypad", keypad);
+			if (err) {
+				dev_err(&pdev->dev,
+					"Unable to acquire interrupt "
+					"for GPIO line %i\n",
+					pdata->row_gpios[i]);
+				goto err_free_irqs;
+			}
 		}
 	}
 
@@ -418,11 +465,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	for (i = 0; i < pdata->num_row_gpios; i++) {
-		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
-		gpio_free(pdata->row_gpios[i]);
+	if (pdata->clustered_irq > 0) {
+		free_irq(pdata->clustered_irq, keypad);
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
 	}
 
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		gpio_free(pdata->row_gpios[i]);
+
 	for (i = 0; i < pdata->num_col_gpios; i++)
 		gpio_free(pdata->col_gpios[i]);
 

drivers/input/keyboard/mcs_touchkey.c

+/*
+ * mcs_touchkey.c - Touchkey driver for MELFAS MCS5000/5080 controller
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mcs.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+/* MCS5000 Touchkey */
+#define MCS5000_TOUCHKEY_STATUS		0x04
+#define MCS5000_TOUCHKEY_STATUS_PRESS	7
+#define MCS5000_TOUCHKEY_FW		0x0a
+#define MCS5000_TOUCHKEY_BASE_VAL	0x61
+
+/* MCS5080 Touchkey */
+#define MCS5080_TOUCHKEY_STATUS		0x00
+#define MCS5080_TOUCHKEY_STATUS_PRESS	3
+#define MCS5080_TOUCHKEY_FW		0x01
+#define MCS5080_TOUCHKEY_BASE_VAL	0x1
+
+enum mcs_touchkey_type {
+	MCS5000_TOUCHKEY,
+	MCS5080_TOUCHKEY,
+};
+
+struct mcs_touchkey_chip {
+	unsigned int status_reg;
+	unsigned int pressbit;
+	unsigned int press_invert;
+	unsigned int baseval;
+};
+
+struct mcs_touchkey_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct mcs_touchkey_chip chip;
+	unsigned int key_code;
+	unsigned int key_val;
+	unsigned short keycodes[];
+};
+
+static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id)
+{
+	struct mcs_touchkey_data *data = dev_id;
+	struct mcs_touchkey_chip *chip = &data->chip;
+	struct i2c_client *client = data->client;
+	struct input_dev *input = data->input_dev;
+	unsigned int key_val;
+	unsigned int pressed;
+	int val;
+
+	val = i2c_smbus_read_byte_data(client, chip->status_reg);
+	if (val < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", val);
+		goto out;
+	}
+
+	pressed = (val & (1 << chip->pressbit)) >> chip->pressbit;
+	if (chip->press_invert)
+		pressed ^= chip->press_invert;
+
+	/* key_val is 0 when released, so we should use key_val of press. */
+	if (pressed) {
+		key_val = val & (0xff >> (8 - chip->pressbit));
+		if (!key_val)
+			goto out;
+		key_val -= chip->baseval;
+		data->key_code = data->keycodes[key_val];
+		data->key_val = key_val;
+	}
+
+	input_event(input, EV_MSC, MSC_SCAN, data->key_val);
+	input_report_key(input, data->key_code, pressed);
+	input_sync(input);
+
+	dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code,
+		pressed ? "pressed" : "released");
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static int __devinit mcs_touchkey_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	const struct mcs_platform_data *pdata;
+	struct mcs_touchkey_data *data;
+	struct input_dev *input_dev;
+	unsigned int fw_reg;
+	int fw_ver;
+	int error;
+	int i;
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	data = kzalloc(sizeof(struct mcs_touchkey_data) +
+			sizeof(data->keycodes[0]) * (pdata->key_maxval + 1),
+			GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+
+	if (id->driver_data == MCS5000_TOUCHKEY) {
+		data->chip.status_reg = MCS5000_TOUCHKEY_STATUS;
+		data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS;
+		data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL;
+		fw_reg = MCS5000_TOUCHKEY_FW;
+	} else {
+		data->chip.status_reg = MCS5080_TOUCHKEY_STATUS;
+		data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS;
+		data->chip.press_invert = 1;
+		data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL;
+		fw_reg = MCS5080_TOUCHKEY_FW;
+	}
+
+	fw_ver = i2c_smbus_read_byte_data(client, fw_reg);
+	if (fw_ver < 0) {
+		error = fw_ver;
+		dev_err(&client->dev, "i2c read error[%d]\n", error);
+		goto err_free_mem;
+	}
+	dev_info(&client->dev, "Firmware version: %d\n", fw_ver);
+
+	input_dev->name = "MELPAS MCS Touchkey";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	if (!pdata->no_autorepeat)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+	input_dev->keycode = data->keycodes;
+	input_dev->keycodesize = sizeof(data->keycodes[0]);
+	input_dev->keycodemax = pdata->key_maxval + 1;
+
+	for (i = 0; i < pdata->keymap_size; i++) {
+		unsigned int val = MCS_KEY_VAL(pdata->keymap[i]);
+		unsigned int code = MCS_KEY_CODE(pdata->keymap[i]);
+
+		data->keycodes[val] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, data);
+
+	if (pdata->cfg_pin)
+		pdata->cfg_pin();
+
+	error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
+			IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, data);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return error;
+}
+
+static int __devexit mcs_touchkey_remove(struct i2c_client *client)
+{
+	struct mcs_touchkey_data *data = i2c_get_clientdata(client);
+
+	free_irq(client->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id mcs_touchkey_id[] = {
+	{ "mcs5000_touchkey", MCS5000_TOUCHKEY },
+	{ "mcs5080_touchkey", MCS5080_TOUCHKEY },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id);
+
+static struct i2c_driver mcs_touchkey_driver = {
+	.driver = {
+		.name	= "mcs_touchkey",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= mcs_touchkey_probe,
+	.remove		= __devexit_p(mcs_touchkey_remove),
+	.id_table	= mcs_touchkey_id,
+};
+
+static int __init mcs_touchkey_init(void)
+{
+	return i2c_add_driver(&mcs_touchkey_driver);
+}
+
+static void __exit mcs_touchkey_exit(void)
+{
+	i2c_del_driver(&mcs_touchkey_driver);
+}
+
+module_init(mcs_touchkey_init);
+module_exit(mcs_touchkey_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>");
+MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller");
+MODULE_LICENSE("GPL");

drivers/input/keyboard/samsung-keypad.c

+/*
+ * Samsung keypad driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <plat/keypad.h>
+
+#define SAMSUNG_KEYIFCON			0x00
+#define SAMSUNG_KEYIFSTSCLR			0x04
+#define SAMSUNG_KEYIFCOL			0x08
+#define SAMSUNG_KEYIFROW			0x0c
+#define SAMSUNG_KEYIFFC				0x10
+
+/* SAMSUNG_KEYIFCON */
+#define SAMSUNG_KEYIFCON_INT_F_EN		(1 << 0)
+#define SAMSUNG_KEYIFCON_INT_R_EN		(1 << 1)
+#define SAMSUNG_KEYIFCON_DF_EN			(1 << 2)
+#define SAMSUNG_KEYIFCON_FC_EN			(1 << 3)
+#define SAMSUNG_KEYIFCON_WAKEUPEN		(1 << 4)
+
+/* SAMSUNG_KEYIFSTSCLR */
+#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK		(0xff << 0)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK		(0xff << 8)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET	8
+#define S5PV210_KEYIFSTSCLR_P_INT_MASK		(0x3fff << 0)
+#define S5PV210_KEYIFSTSCLR_R_INT_MASK		(0x3fff << 16)
+#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET	16
+
+/* SAMSUNG_KEYIFCOL */
+#define SAMSUNG_KEYIFCOL_MASK			(0xff << 0)
+#define S5PV210_KEYIFCOLEN_MASK			(0xff << 8)
+
+/* SAMSUNG_KEYIFROW */
+#define SAMSUNG_KEYIFROW_MASK			(0xff << 0)
+#define S5PV210_KEYIFROW_MASK			(0x3fff << 0)
+
+/* SAMSUNG_KEYIFFC */
+#define SAMSUNG_KEYIFFC_MASK			(0x3ff << 0)
+
+enum samsung_keypad_type {
+	KEYPAD_TYPE_SAMSUNG,
+	KEYPAD_TYPE_S5PV210,
+};
+
+struct samsung_keypad {
+	struct input_dev *input_dev;
+	struct clk *clk;
+	void __iomem *base;
+	wait_queue_head_t wait;
+	bool stopped;
+	int irq;
+	unsigned int row_shift;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned int row_state[SAMSUNG_MAX_COLS];
+	unsigned short keycodes[];
+};
+
+static int samsung_keypad_is_s5pv210(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	enum samsung_keypad_type type =
+		platform_get_device_id(pdev)->driver_data;
+
+	return type == KEYPAD_TYPE_S5PV210;
+}
+
+static void samsung_keypad_scan(struct samsung_keypad *keypad,
+				unsigned int *row_state)
+{
+	struct device *dev = keypad->input_dev->dev.parent;
+	unsigned int col;
+	unsigned int val;
+
+	for (col = 0; col < keypad->cols; col++) {
+		if (samsung_keypad_is_s5pv210(dev)) {
+			val = S5PV210_KEYIFCOLEN_MASK;
+			val &= ~(1 << col) << 8;
+		} else {
+			val = SAMSUNG_KEYIFCOL_MASK;
+			val &= ~(1 << col);
+		}
+
+		writel(val, keypad->base + SAMSUNG_KEYIFCOL);
+		mdelay(1);
+
+		val = readl(keypad->base + SAMSUNG_KEYIFROW);
+		row_state[col] = ~val & ((1 << keypad->rows) - 1);
+	}
+
+	/* KEYIFCOL reg clear */
+	writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+}
+
+static bool samsung_keypad_report(struct samsung_keypad *keypad,
+				  unsigned int *row_state)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned int changed;
+	unsigned int pressed;
+	unsigned int key_down = 0;
+	unsigned int val;
+	unsigned int col, row;
+
+	for (col = 0; col < keypad->cols; col++) {
+		changed = row_state[col] ^ keypad->row_state[col];
+		key_down |= row_state[col];
+		if (!changed)
+			continue;
+
+		for (row = 0; row < keypad->rows; row++) {
+			if (!(changed & (1 << row)))
+				continue;
+
+			pressed = row_state[col] & (1 << row);
+
+			dev_dbg(&keypad->input_dev->dev,
+				"key %s, row: %d, col: %d\n",
+				pressed ? "pressed" : "released", row, col);
+
+			val = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+
+			input_event(input_dev, EV_MSC, MSC_SCAN, val);
+			input_report_key(input_dev,
+					keypad->keycodes[val], pressed);
+		}
+		input_sync(keypad->input_dev);
+	}
+
+	memcpy(keypad->row_state, row_state, sizeof(keypad->row_state));
+
+	return key_down;
+}
+
+static irqreturn_t samsung_keypad_irq(int irq, void *dev_id)
+{
+	struct samsung_keypad *keypad = dev_id;
+	unsigned int row_state[SAMSUNG_MAX_COLS];
+	unsigned int val;
+	bool key_down;
+
+	do {
+		val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR);
+		/* Clear interrupt. */
+		writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
+
+		samsung_keypad_scan(keypad, row_state);
+
+		key_down = samsung_keypad_report(keypad, row_state);
+		if (key_down)
+			wait_event_timeout(keypad->wait, keypad->stopped,
+					   msecs_to_jiffies(50));
+
+	} while (key_down && !keypad->stopped);
+
+	return IRQ_HANDLED;
+}
+
+static void samsung_keypad_start(struct samsung_keypad *keypad)
+{
+	unsigned int val;
+
+	/* Tell IRQ thread that it may poll the device. */
+	keypad->stopped = false;
+
+	clk_enable(keypad->clk);
+
+	/* Enable interrupt bits. */
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val |= SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN;
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	/* KEYIFCOL reg clear. */
+	writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+}
+
+static void samsung_keypad_stop(struct samsung_keypad *keypad)
+{
+	unsigned int val;
+
+	/* Signal IRQ thread to stop polling and disable the handler. */
+	keypad->stopped = true;
+	wake_up(&keypad->wait);
+	disable_irq(keypad->irq);
+
+	/* Clear interrupt. */
+	writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
+
+	/* Disable interrupt bits. */
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val &= ~(SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN);
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+
+	/*
+	 * Now that chip should not generate interrupts we can safely
+	 * re-enable the handler.
+	 */
+	enable_irq(keypad->irq);
+}
+
+static int samsung_keypad_open(struct input_dev *input_dev)
+{
+	struct samsung_keypad *keypad = input_get_drvdata(input_dev);
+
+	samsung_keypad_start(keypad);
+
+	return 0;
+}
+
+static void samsung_keypad_close(struct input_dev *input_dev)
+{
+	struct samsung_keypad *keypad = input_get_drvdata(input_dev);
+
+	samsung_keypad_stop(keypad);
+}
+
+static int __devinit samsung_keypad_probe(struct platform_device *pdev)
+{
+	const struct samsung_keypad_platdata *pdata;
+	const struct matrix_keymap_data *keymap_data;
+	struct samsung_keypad *keypad;
+	struct resource *res;
+	struct input_dev *input_dev;
+	unsigned int row_shift;
+	unsigned int keymap_size;
+	int error;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	keymap_data = pdata->keymap_data;
+	if (!keymap_data) {
+		dev_err(&pdev->dev, "no keymap data defined\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->rows || pdata->rows > SAMSUNG_MAX_ROWS)
+		return -EINVAL;
+
+	if (!pdata->cols || pdata->cols > SAMSUNG_MAX_COLS)
+		return -EINVAL;
+
+	/* initialize the gpio */
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(pdata->rows, pdata->cols);
+
+	row_shift = get_count_order(pdata->cols);
+	keymap_size = (pdata->rows << row_shift) * sizeof(keypad->keycodes[0]);
+
+	keypad = kzalloc(sizeof(*keypad) + keymap_size, GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!keypad || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		error = -ENODEV;
+		goto err_free_mem;
+	}
+
+	keypad->base = ioremap(res->start, resource_size(res));
+	if (!keypad->base) {
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	keypad->clk = clk_get(&pdev->dev, "keypad");
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get keypad clk\n");
+		error = PTR_ERR(keypad->clk);
+		goto err_unmap_base;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->row_shift = row_shift;
+	keypad->rows = pdata->rows;
+	keypad->cols = pdata->cols;
+	init_waitqueue_head(&keypad->wait);
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+	input_set_drvdata(input_dev, keypad);
+
+	input_dev->open = samsung_keypad_open;
+	input_dev->close = samsung_keypad_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	if (!pdata->no_autorepeat)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_dev->keycode = keypad->keycodes;
+	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+	input_dev->keycodemax = pdata->rows << row_shift;
+
+	matrix_keypad_build_keymap(keymap_data, row_shift,
+			input_dev->keycode, input_dev->keybit);
+
+	keypad->irq = platform_get_irq(pdev, 0);
+	if (keypad->irq < 0) {
+		error = keypad->irq;
+		goto err_put_clk;
+	}
+
+	error = request_threaded_irq(keypad->irq, NULL, samsung_keypad_irq,
+			IRQF_ONESHOT, dev_name(&pdev->dev), keypad);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register keypad interrupt\n");
+		goto err_put_clk;
+	}
+
+	error = input_register_device(keypad->input_dev);
+	if (error)
+		goto err_free_irq;
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	platform_set_drvdata(pdev, keypad);
+	return 0;
+
+err_free_irq:
+	free_irq(keypad->irq, keypad);
+err_put_clk:
+	clk_put(keypad->clk);
+err_unmap_base:
+	iounmap(keypad->base);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(keypad);
+
+	return error;
+}
+
+static int __devexit samsung_keypad_remove(struct platform_device *pdev)
+{
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	platform_set_drvdata(pdev, NULL);
+
+	input_unregister_device(keypad->input_dev);
+
+	/*
+	 * It is safe to free IRQ after unregistering device because
+	 * samsung_keypad_close will shut off interrupts.
+	 */
+	free_irq(keypad->irq, keypad);
+
+	clk_put(keypad->clk);
+
+	iounmap(keypad->base);
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad,
+					 bool enable)
+{
+	struct device *dev = keypad->input_dev->dev.parent;
+	unsigned int val;
+
+	clk_enable(keypad->clk);
+
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	if (enable) {
+		val |= SAMSUNG_KEYIFCON_WAKEUPEN;
+		if (device_may_wakeup(dev))
+			enable_irq_wake(keypad->irq);
+	} else {
+		val &= ~SAMSUNG_KEYIFCON_WAKEUPEN;
+		if (device_may_wakeup(dev))
+			disable_irq_wake(keypad->irq);
+	}
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+}
+
+static int samsung_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		samsung_keypad_stop(keypad);
+
+	samsung_keypad_toggle_wakeup(keypad, true);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int samsung_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	samsung_keypad_toggle_wakeup(keypad, false);
+
+	if (input_dev->users)
+		samsung_keypad_start(keypad);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops samsung_keypad_pm_ops = {
+	.suspend	= samsung_keypad_suspend,
+	.resume		= samsung_keypad_resume,
+};
+#endif
+
+static struct platform_device_id samsung_keypad_driver_ids[] = {
+	{
+		.name		= "samsung-keypad",
+		.driver_data	= KEYPAD_TYPE_SAMSUNG,
+	}, {
+		.name		= "s5pv210-keypad",
+		.driver_data	= KEYPAD_TYPE_S5PV210,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, samsung_keypad_driver_ids);
+
+static struct platform_driver samsung_keypad_driver = {
+	.probe		= samsung_keypad_probe,
+	.remove		= __devexit_p(samsung_keypad_remove),
+	.driver		= {
+		.name	= "samsung-keypad",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &samsung_keypad_pm_ops,
+#endif
+	},
+	.id_table	= samsung_keypad_driver_ids,
+};
+
+static int __init samsung_keypad_init(void)
+{
+	return platform_driver_register(&samsung_keypad_driver);
+}
+module_init(samsung_keypad_init);
+
+static void __exit samsung_keypad_exit(void)
+{
+	platform_driver_unregister(&samsung_keypad_driver);
+}
+module_exit(samsung_keypad_exit);
+
+MODULE_DESCRIPTION("Samsung keypad driver");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-keypad");

drivers/input/misc/Kconfig

@@ -327,6 +327,17 @@ config INPUT_PCF8574
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcf8574_keypad.
 
+config INPUT_PWM_BEEPER
+	tristate "PWM beeper support"
+	depends on HAVE_PWM
+	help
+	  Say Y here to get support for PWM based beeper devices.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called pwm-beeper.
+
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
 	depends on GPIOLIB && GENERIC_GPIO
@@ -390,4 +401,41 @@ config INPUT_PCAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcap_keys.
 
+config INPUT_ADXL34X
+	tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
+	default n
+	help
+	  Say Y here if you have a Accelerometer interface using the
+	  ADXL345/6 controller, and your board-specific initialization
+	  code includes that in its table of devices.
+
+	  This driver can use either I2C or SPI communication to the
+	  ADXL345/6 controller.  Select the appropriate method for
+	  your system.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x.
+
+config INPUT_ADXL34X_I2C
+	tristate "support I2C bus connection"
+	depends on INPUT_ADXL34X && I2C
+	default y
+	help
+	  Say Y here if you have ADXL345/6 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x-i2c.
+
+config INPUT_ADXL34X_SPI
+	tristate "support SPI bus connection"
+	depends on INPUT_ADXL34X && SPI
+	default y
+	help
+	  Say Y here if you have ADXL345/6 hooked to a SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x-spi.
+
 endif

drivers/input/misc/Makefile

@@ -8,6 +8,9 @@ obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
 obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
 obj-$(CONFIG_INPUT_AD714X_I2C)		+= ad714x-i2c.o
 obj-$(CONFIG_INPUT_AD714X_SPI)		+= ad714x-spi.o
+obj-$(CONFIG_INPUT_ADXL34X)		+= adxl34x.o
+obj-$(CONFIG_INPUT_ADXL34X_I2C)		+= adxl34x-i2c.o
+obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
@@ -26,6 +29,7 @@ obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
+obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o

drivers/input/misc/adxl34x-i2c.c

+/*
+ * ADLX345/346 Three-Axis Digital Accelerometers (I2C Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include "adxl34x.h"
+
+static int adxl34x_smbus_read(struct device *dev, unsigned char reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int adxl34x_smbus_write(struct device *dev,
+			       unsigned char reg, unsigned char val)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int adxl34x_smbus_read_block(struct device *dev,
+				    unsigned char reg, int count,
+				    void *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_read_i2c_block_data(client, reg, count, buf);
+}
+
+static int adxl34x_i2c_read_block(struct device *dev,
+				  unsigned char reg, int count,
+				  void *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_master_send(client, &reg, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_master_recv(client, buf, count);
+	if (ret < 0)
+		return ret;
+
+	if (ret != count)
+		return -EIO;
+
+	return 0;
+}
+
+static const struct adxl34x_bus_ops adxl34x_smbus_bops = {
+	.bustype	= BUS_I2C,
+	.write		= adxl34x_smbus_write,
+	.read		= adxl34x_smbus_read,
+	.read_block	= adxl34x_smbus_read_block,
+};
+
+static const struct adxl34x_bus_ops adxl34x_i2c_bops = {
+	.bustype	= BUS_I2C,
+	.write		= adxl34x_smbus_write,
+	.read		= adxl34x_smbus_read,
+	.read_block	= adxl34x_i2c_read_block,
+};
+
+static int __devinit adxl34x_i2c_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct adxl34x *ac;
+	int error;
+
+	error = i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE_DATA);
+	if (!error) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	ac = adxl34x_probe(&client->dev, client->irq, false,
+			   i2c_check_functionality(client->adapter,
+						   I2C_FUNC_SMBUS_READ_I2C_BLOCK) ?
+				&adxl34x_smbus_bops : &adxl34x_i2c_bops);
+	if (IS_ERR(ac))
+		return PTR_ERR(ac);
+
+	i2c_set_clientdata(client, ac);
+
+	return 0;
+}
+
+static int __devexit adxl34x_i2c_remove(struct i2c_client *client)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	return adxl34x_remove(ac);
+}
+
+#ifdef CONFIG_PM
+static int adxl34x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	adxl34x_suspend(ac);
+
+	return 0;
+}
+
+static int adxl34x_i2c_resume(struct i2c_client *client)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	adxl34x_resume(ac);
+
+	return 0;
+}
+#else
+# define adxl34x_i2c_suspend NULL
+# define adxl34x_i2c_resume  NULL
+#endif
+
+static const struct i2c_device_id adxl34x_id[] = {
+	{ "adxl34x", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, adxl34x_id);
+
+static struct i2c_driver adxl34x_driver = {
+	.driver = {
+		.name = "adxl34x",
+		.owner = THIS_MODULE,
+	},
+	.probe    = adxl34x_i2c_probe,
+	.remove   = __devexit_p(adxl34x_i2c_remove),
+	.suspend  = adxl34x_i2c_suspend,
+	.resume   = adxl34x_i2c_resume,
+	.id_table = adxl34x_id,
+};
+
+static int __init adxl34x_i2c_init(void)
+{
+	return i2c_add_driver(&adxl34x_driver);
+}
+module_init(adxl34x_i2c_init);
+
+static void __exit adxl34x_i2c_exit(void)
+{
+	i2c_del_driver(&adxl34x_driver);
+}
+module_exit(adxl34x_i2c_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer I2C Bus Driver");
+MODULE_LICENSE("GPL");

drivers/input/misc/adxl34x-spi.c

+/*
+ * ADLX345/346 Three-Axis Digital Accelerometers (SPI Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_SPI */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include "adxl34x.h"
+
+#define MAX_SPI_FREQ_HZ		5000000
+#define MAX_FREQ_NO_FIFODELAY	1500000
+#define ADXL34X_CMD_MULTB	(1 << 6)
+#define ADXL34X_CMD_READ	(1 << 7)
+#define ADXL34X_WRITECMD(reg)	(reg & 0x3F)
+#define ADXL34X_READCMD(reg)	(ADXL34X_CMD_READ | (reg & 0x3F))
+#define ADXL34X_READMB_CMD(reg) (ADXL34X_CMD_READ | ADXL34X_CMD_MULTB \
+					| (reg & 0x3F))
+
+static int adxl34x_spi_read(struct device *dev, unsigned char reg)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char cmd;
+
+	cmd = ADXL34X_READCMD(reg);
+
+	return spi_w8r8(spi, cmd);
+}
+
+static int adxl34x_spi_write(struct device *dev,
+			     unsigned char reg, unsigned char val)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	buf[0] = ADXL34X_WRITECMD(reg);
+	buf[1] = val;
+
+	return spi_write(spi, buf, sizeof(buf));
+}
+
+static int adxl34x_spi_read_block(struct device *dev,
+				  unsigned char reg, int count,
+				  void *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	ssize_t status;
+
+	reg = ADXL34X_READMB_CMD(reg);
+	status = spi_write_then_read(spi, &reg, 1, buf, count);
+
+	return (status < 0) ? status : 0;
+}
+
+static const struct adxl34x_bus_ops adx134x_spi_bops = {
+	.bustype	= BUS_SPI,
+	.write		= adxl34x_spi_write,
+	.read		= adxl34x_spi_read,
+	.read_block	= adxl34x_spi_read_block,
+};
+
+static int __devinit adxl34x_spi_probe(struct spi_device *spi)
+{
+	struct adxl34x *ac;
+
+	/* don't exceed max specified SPI CLK frequency */
+	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+		dev_err(&spi->dev, "SPI CLK %d Hz too fast\n", spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	ac = adxl34x_probe(&spi->dev, spi->irq,
+			   spi->max_speed_hz > MAX_FREQ_NO_FIFODELAY,
+			   &adx134x_spi_bops);
+
+	if (IS_ERR(ac))
+		return PTR_ERR(ac);
+
+	spi_set_drvdata(spi, ac);
+
+	return 0;
+}
+
+static int __devexit adxl34x_spi_remove(struct spi_device *spi)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	return adxl34x_remove(ac);
+}
+
+#ifdef CONFIG_PM
+static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	adxl34x_suspend(ac);
+
+	return 0;
+}
+
+static int adxl34x_spi_resume(struct spi_device *spi)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	adxl34x_resume(ac);
+
+	return 0;
+}
+#else
+# define adxl34x_spi_suspend NULL
+# define adxl34x_spi_resume  NULL
+#endif
+
+static struct spi_driver adxl34x_driver = {
+	.driver = {
+		.name = "adxl34x",
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe   = adxl34x_spi_probe,
+	.remove  = __devexit_p(adxl34x_spi_remove),
+	.suspend = adxl34x_spi_suspend,
+	.resume  = adxl34x_spi_resume,
+};
+
+static int __init adxl34x_spi_init(void)
+{
+	return spi_register_driver(&adxl34x_driver);
+}
+module_init(adxl34x_spi_init);
+
+static void __exit adxl34x_spi_exit(void)
+{
+	spi_unregister_driver(&adxl34x_driver);
+}
+module_exit(adxl34x_spi_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer SPI Bus Driver");
+MODULE_LICENSE("GPL");

drivers/input/misc/adxl34x.h

+/*
+ * ADXL345/346 Three-Axis Digital Accelerometers (I2C/SPI Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ADXL34X_H_
+#define _ADXL34X_H_
+
+struct device;
+struct adxl34x;
+
+struct adxl34x_bus_ops {
+	u16 bustype;
+	int (*read)(struct device *, unsigned char);
+	int (*read_block)(struct device *, unsigned char, int, void *);
+	int (*write)(struct device *, unsigned char, unsigned char);
+};
+
+void adxl34x_suspend(struct adxl34x *ac);
+void adxl34x_resume(struct adxl34x *ac);
+struct adxl34x *adxl34x_probe(struct device *dev, int irq,
+			      bool fifo_delay_default,
+			      const struct adxl34x_bus_ops *bops);
+int adxl34x_remove(struct adxl34x *ac);
+
+#endif

drivers/input/misc/atlas_btns.c

@@ -21,6 +21,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -60,12 +62,11 @@ static acpi_status acpi_atlas_button_handler(u32 function,
 		input_report_key(input_dev, atlas_keymap[code], key_down);
 		input_sync(input_dev);
 
-		status = 0;
+		status = AE_OK;
 	} else {
-		printk(KERN_WARNING "atlas: shrugged on unexpected function"
-			":function=%x,address=%lx,value=%x\n",
+		pr_warn("shrugged on unexpected function: function=%x,address=%lx,value=%x\n",
 			function, (unsigned long)address, (u32)*value);
-		status = -EINVAL;
+		status = AE_BAD_PARAMETER;
 	}
 
 	return status;
@@ -79,7 +80,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 
 	input_dev = input_allocate_device();
 	if (!input_dev) {
-		printk(KERN_ERR "atlas: unable to allocate input device\n");
+		pr_err("unable to allocate input device\n");
 		return -ENOMEM;
 	}
 
@@ -102,7 +103,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 
 	err = input_register_device(input_dev);
 	if (err) {
-		printk(KERN_ERR "atlas: couldn't register input device\n");
+		pr_err("couldn't register input device\n");
 		input_free_device(input_dev);
 		return err;
 	}
@@ -112,12 +113,12 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 				0x81, &acpi_atlas_button_handler,
 				&acpi_atlas_button_setup, device);
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR "Atlas: Error installing addr spc handler\n");
+		pr_err("error installing addr spc handler\n");
 		input_unregister_device(input_dev);
-		status = -EINVAL;
+		err = -EINVAL;
 	}
 
-	return status;
+	return err;
 }
 
 static int atlas_acpi_button_remove(struct acpi_device *device, int type)
@@ -126,14 +127,12 @@ static int atlas_acpi_button_remove(struct acpi_device *device, int type)
 
 	status = acpi_remove_address_space_handler(device->handle,
 				0x81, &acpi_atlas_button_handler);
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR "Atlas: Error removing addr spc handler\n");
-		status = -EINVAL;
-	}
+	if (ACPI_FAILURE(status))
+		pr_err("error removing addr spc handler\n");
 
 	input_unregister_device(input_dev);
 
-	return status;
+	return 0;
 }
 
 static const struct acpi_device_id atlas_device_ids[] = {
@@ -145,6 +144,7 @@ MODULE_DEVICE_TABLE(acpi, atlas_device_ids);
 static struct acpi_driver atlas_acpi_driver = {
 	.name	= ACPI_ATLAS_NAME,
 	.class	= ACPI_ATLAS_CLASS,
+	.owner	= THIS_MODULE,
 	.ids	= atlas_device_ids,
 	.ops	= {
 		.add	= atlas_acpi_button_add,
@@ -154,18 +154,10 @@ static struct acpi_driver atlas_acpi_driver = {
 
 static int __init atlas_acpi_init(void)
 {
-	int result;
-
 	if (acpi_disabled)
 		return -ENODEV;
 
-	result = acpi_bus_register_driver(&atlas_acpi_driver);
-	if (result < 0) {
-		printk(KERN_ERR "Atlas ACPI: Unable to register driver\n");
-		return -ENODEV;
-	}
-
-	return 0;
+	return acpi_bus_register_driver(&atlas_acpi_driver);
 }
 
 static void __exit atlas_acpi_exit(void)

drivers/input/misc/pwm-beeper.c

+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  PWM beeper driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+struct pwm_beeper {
+	struct input_dev *input;
+	struct pwm_device *pwm;
+	unsigned long period;
+};
+
+#define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
+
+static int pwm_beeper_event(struct input_dev *input,
+			    unsigned int type, unsigned int code, int value)
+{
+	int ret = 0;
+	struct pwm_beeper *beeper = input_get_drvdata(input);
+	unsigned long period;
+
+	if (type != EV_SND || value < 0)
+		return -EINVAL;
+
+	switch (code) {
+	case SND_BELL:
+		value = value ? 1000 : 0;
+		break;
+	case SND_TONE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (value == 0) {
+		pwm_config(beeper->pwm, 0, 0);
+		pwm_disable(beeper->pwm);
+	} else {
+		period = HZ_TO_NANOSECONDS(value);
+		ret = pwm_config(beeper->pwm, period / 2, period);
+		if (ret)
+			return ret;
+		ret = pwm_enable(beeper->pwm);
+		if (ret)
+			return ret;
+		beeper->period = period;
+	}
+
+	return 0;
+}
+
+static int __devinit pwm_beeper_probe(struct platform_device *pdev)
+{
+	unsigned long pwm_id = (unsigned long)pdev->dev.platform_data;
+	struct pwm_beeper *beeper;
+	int error;
+
+	beeper = kzalloc(sizeof(*beeper), GFP_KERNEL);
+	if (!beeper)
+		return -ENOMEM;
+
+	beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+
+	if (IS_ERR(beeper->pwm)) {
+		error = PTR_ERR(beeper->pwm);
+		dev_err(&pdev->dev, "Failed to request pwm device: %d\n", error);
+		goto err_free;
+	}
+
+	beeper->input = input_allocate_device();
+	if (!beeper->input) {
+		dev_err(&pdev->dev, "Failed to allocate input device\n");
+		error = -ENOMEM;
+		goto err_pwm_free;
+	}
+	beeper->input->dev.parent = &pdev->dev;
+
+	beeper->input->name = "pwm-beeper";
+	beeper->input->phys = "pwm/input0";
+	beeper->input->id.bustype = BUS_HOST;
+	beeper->input->id.vendor = 0x001f;
+	beeper->input->id.product = 0x0001;
+	beeper->input->id.version = 0x0100;
+
+	beeper->input->evbit[0] = BIT(EV_SND);
+	beeper->input->sndbit[0] = BIT(SND_TONE) | BIT(SND_BELL);
+
+	beeper->input->event = pwm_beeper_event;
+
+	input_set_drvdata(beeper->input, beeper);
+
+	error = input_register_device(beeper->input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to register input device: %d\n", error);
+		goto err_input_free;
+	}
+
+	platform_set_drvdata(pdev, beeper);
+
+	return 0;
+
+err_input_free:
+	input_free_device(beeper->input);
+err_pwm_free:
+	pwm_free(beeper->pwm);
+err_free:
+	kfree(beeper);
+
+	return error;
+}
+
+static int __devexit pwm_beeper_remove(struct platform_device *pdev)
+{
+	struct pwm_beeper *beeper = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	input_unregister_device(beeper->input);
+
+	pwm_disable(beeper->pwm);
+	pwm_free(beeper->pwm);
+
+	kfree(beeper);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pwm_beeper_suspend(struct device *dev)
+{
+	struct pwm_beeper *beeper = dev_get_drvdata(dev);
+
+	if (beeper->period)
+		pwm_disable(beeper->pwm);
+
+	return 0;
+}
+
+static int pwm_beeper_resume(struct device *dev)
+{
+	struct pwm_beeper *beeper = dev_get_drvdata(dev);
+
+	if (beeper->period) {
+		pwm_config(beeper->pwm, beeper->period / 2, beeper->period);
+		pwm_enable(beeper->pwm);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
+			 pwm_beeper_suspend, pwm_beeper_resume);
+
+#define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops)
+#else
+#define PWM_BEEPER_PM_OPS NULL
+#endif
+
+static struct platform_driver pwm_beeper_driver = {
+	.probe	= pwm_beeper_probe,
+	.remove = __devexit_p(pwm_beeper_remove),
+	.driver = {
+		.name	= "pwm-beeper",
+		.owner	= THIS_MODULE,
+		.pm	= PWM_BEEPER_PM_OPS,
+	},
+};
+
+static int __init pwm_beeper_init(void)
+{
+	return platform_driver_register(&pwm_beeper_driver);
+}
+module_init(pwm_beeper_init);
+
+static void __exit pwm_beeper_exit(void)
+{
+	platform_driver_unregister(&pwm_beeper_driver);
+}
+module_exit(pwm_beeper_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("PWM beeper driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pwm-beeper");

drivers/input/misc/twl4030-pwrbutton.c

@@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
 	return IRQ_HANDLED;
 }
 
-static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev)
+static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
 {
 	struct input_dev *pwr;
 	int irq = platform_get_irq(pdev, 0);
@@ -95,7 +95,7 @@ static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev)
 	return err;
 }
 
-static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
+static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
 {
 	struct input_dev *pwr = platform_get_drvdata(pdev);
 	int irq = platform_get_irq(pdev, 0);
@@ -106,9 +106,8 @@ static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
 	return 0;
 }
 
-struct platform_driver twl4030_pwrbutton_driver = {
-	.probe		= twl4030_pwrbutton_probe,
-	.remove		= __devexit_p(twl4030_pwrbutton_remove),
+static struct platform_driver twl4030_pwrbutton_driver = {
+	.remove		= __exit_p(twl4030_pwrbutton_remove),
 	.driver		= {
 		.name	= "twl4030_pwrbutton",
 		.owner	= THIS_MODULE,
@@ -117,7 +116,8 @@ struct platform_driver twl4030_pwrbutton_driver = {
 
 static int __init twl4030_pwrbutton_init(void)
 {
-	return platform_driver_register(&twl4030_pwrbutton_driver);
+	return platform_driver_probe(&twl4030_pwrbutton_driver,
+			twl4030_pwrbutton_probe);
 }
 module_init(twl4030_pwrbutton_init);
 

drivers/input/misc/wistron_btns.c

@@ -1347,7 +1347,7 @@ static int __init wb_module_init(void)
 
 	err = map_bios();
 	if (err)
-		return err;
+		goto err_free_keymap;
 
 	err = platform_driver_register(&wistron_driver);
 	if (err)
@@ -1371,6 +1371,8 @@ static int __init wb_module_init(void)
 	platform_driver_unregister(&wistron_driver);
  err_unmap_bios:
 	unmap_bios();
+ err_free_keymap:
+	kfree(keymap);
 
 	return err;
 }

drivers/input/mouse/bcm5974.c

@@ -312,6 +312,8 @@ static void setup_events_to_report(struct input_dev *input_dev,
 	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
 	__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
 	__set_bit(BTN_LEFT, input_dev->keybit);
+
+	input_set_events_per_packet(input_dev, 60);
 }
 
 /* report button data as logical button state */
@@ -580,23 +582,30 @@ static void bcm5974_irq_trackpad(struct urb *urb)
  */
 static int bcm5974_start_traffic(struct bcm5974 *dev)
 {
-	if (bcm5974_wellspring_mode(dev, true)) {
+	int error;
+
+	error = bcm5974_wellspring_mode(dev, true);
+	if (error) {
 		dprintk(1, "bcm5974: mode switch failed\n");
-		goto error;
+		goto err_out;
 	}
 
-	if (usb_submit_urb(dev->bt_urb, GFP_KERNEL))
-		goto error;
+	error = usb_submit_urb(dev->bt_urb, GFP_KERNEL);
+	if (error)
+		goto err_reset_mode;
 
-	if (usb_submit_urb(dev->tp_urb, GFP_KERNEL))
+	error = usb_submit_urb(dev->tp_urb, GFP_KERNEL);
+	if (error)
 		goto err_kill_bt;
 
 	return 0;
 
 err_kill_bt:
 	usb_kill_urb(dev->bt_urb);
-error:
-	return -EIO;
+err_reset_mode:
+	bcm5974_wellspring_mode(dev, false);
+err_out:
+	return error;
 }
 
 static void bcm5974_pause_traffic(struct bcm5974 *dev)

drivers/input/mouse/synaptics.c

@@ -502,7 +502,9 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	}
 	input_report_abs(dev, ABS_PRESSURE, hw.z);
 
-	input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
+	if (SYN_CAP_PALMDETECT(priv->capabilities))
+		input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
+
 	input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1);
 	input_report_key(dev, BTN_LEFT, hw.left);
 	input_report_key(dev, BTN_RIGHT, hw.right);
@@ -602,7 +604,9 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	input_set_abs_params(dev, ABS_Y,
 			     YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
-	__set_bit(ABS_TOOL_WIDTH, dev->absbit);
+
+	if (SYN_CAP_PALMDETECT(priv->capabilities))
+		input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
 
 	__set_bit(EV_KEY, dev->evbit);
 	__set_bit(BTN_TOUCH, dev->keybit);

drivers/input/mousedev.c

@@ -57,7 +57,6 @@ struct mousedev_hw_data {
 };
 
 struct mousedev {
-	int exist;
 	int open;
 	int minor;
 	struct input_handle handle;
@@ -66,6 +65,7 @@ struct mousedev {
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	bool exist;
 
 	struct list_head mixdev_node;
 	int mixdev_open;
@@ -765,10 +765,15 @@ static unsigned int mousedev_poll(struct file *file, poll_table *wait)
 {
 	struct mousedev_client *client = file->private_data;
 	struct mousedev *mousedev = client->mousedev;
+	unsigned int mask;
 
 	poll_wait(file, &mousedev->wait, wait);
-	return ((client->ready || client->buffer) ? (POLLIN | POLLRDNORM) : 0) |
-		(mousedev->exist ? 0 : (POLLHUP | POLLERR));
+
+	mask = mousedev->exist ? POLLOUT | POLLWRNORM : POLLHUP | POLLERR;
+	if (client->ready || client->buffer)
+		mask |= POLLIN | POLLRDNORM;
+
+	return mask;
 }
 
 static const struct file_operations mousedev_fops = {
@@ -802,7 +807,7 @@ static void mousedev_remove_chrdev(struct mousedev *mousedev)
 static void mousedev_mark_dead(struct mousedev *mousedev)
 {
 	mutex_lock(&mousedev->mutex);
-	mousedev->exist = 0;
+	mousedev->exist = false;
 	mutex_unlock(&mousedev->mutex);
 }
 
@@ -862,7 +867,7 @@ static struct mousedev *mousedev_create(struct input_dev *dev,
 		dev_set_name(&mousedev->dev, "mouse%d", minor);
 
 	mousedev->minor = minor;
-	mousedev->exist = 1;
+	mousedev->exist = true;
 	mousedev->handle.dev = input_get_device(dev);
 	mousedev->handle.name = dev_name(&mousedev->dev);
 	mousedev->handle.handler = handler;

drivers/input/serio/i8042-ppcio.h

@@ -52,81 +52,6 @@ static inline void i8042_platform_exit(void)
 {
 }
 
-#elif defined(CONFIG_SPRUCE)
-
-#define I8042_KBD_IRQ 22
-#define I8042_AUX_IRQ 21
-
-#define I8042_KBD_PHYS_DESC "spruceps2/serio0"
-#define I8042_AUX_PHYS_DESC "spruceps2/serio1"
-#define I8042_MUX_PHYS_DESC "spruceps2/serio%d"
-
-#define I8042_COMMAND_REG 0xff810000
-#define I8042_DATA_REG 0xff810001
-
-static inline int i8042_read_data(void)
-{
-	unsigned long kbd_data;
-
-	__raw_writel(0x00000088, 0xff500008);
-	eieio();
-
-	__raw_writel(0x03000000, 0xff50000c);
-	eieio();
-
-	asm volatile("lis     7,0xff88        \n\
-		      lswi    6,7,0x8         \n\
-		      mr      %0,6"
-	              : "=r" (kbd_data) :: "6", "7");
-
-	__raw_writel(0x00000000, 0xff50000c);
-	eieio();
-
-	return (unsigned char)(kbd_data >> 24);
-}
-
-static inline int i8042_read_status(void)
-{
-	unsigned long kbd_status;
-
-	__raw_writel(0x00000088, 0xff500008);
-	eieio();
-
-	__raw_writel(0x03000000, 0xff50000c);
-	eieio();
-
-	asm volatile("lis     7,0xff88        \n\
-		      ori     7,7,0x8         \n\
-		      lswi    6,7,0x8         \n\
-		      mr      %0,6"
-		      : "=r" (kbd_status) :: "6", "7");
-
-	__raw_writel(0x00000000, 0xff50000c);
-	eieio();
-
-	return (unsigned char)(kbd_status >> 24);
-}
-
-static inline void i8042_write_data(int val)
-{
-	*((unsigned char *)0xff810000) = (char)val;
-}
-
-static inline void i8042_write_command(int val)
-{
-	*((unsigned char *)0xff810001) = (char)val;
-}
-
-static inline int i8042_platform_init(void)
-{
-	i8042_reset = 1;
-	return 0;
-}
-
-static inline void i8042_platform_exit(void)
-{
-}
-
 #else
 
 #include "i8042-io.h"

drivers/input/serio/i8042.c

@@ -861,9 +861,6 @@ static int i8042_controller_selftest(void)
 	unsigned char param;
 	int i = 0;
 
-	if (!i8042_reset)
-		return 0;
-
 	/*
 	 * We try this 5 times; on some really fragile systems this does not
 	 * take the first time...
@@ -1020,7 +1017,8 @@ static void i8042_controller_reset(void)
  * Reset the controller if requested.
  */
 
-	i8042_controller_selftest();
+	if (i8042_reset)
+		i8042_controller_selftest();
 
 /*
  * Restore the original control register setting.
@@ -1093,24 +1091,12 @@ static void i8042_dritek_enable(void)
 
 #ifdef CONFIG_PM
 
-/*
- * Here we try to restore the original BIOS settings to avoid
- * upsetting it.
- */
-
-static int i8042_pm_reset(struct device *dev)
-{
-	i8042_controller_reset();
-
-	return 0;
-}
-
 /*
  * Here we try to reset everything back to a state we had
  * before suspending.
  */
 
-static int i8042_pm_restore(struct device *dev)
+static int i8042_controller_resume(bool force_reset)
 {
 	int error;
 
@@ -1118,9 +1104,11 @@ static int i8042_pm_restore(struct device *dev)
 	if (error)
 		return error;
 
-	error = i8042_controller_selftest();
-	if (error)
-		return error;
+	if (i8042_reset || force_reset) {
+		error = i8042_controller_selftest();
+		if (error)
+			return error;
+	}
 
 /*
  * Restore original CTR value and disable all ports
@@ -1162,6 +1150,28 @@ static int i8042_pm_restore(struct device *dev)
 	return 0;
 }
 
+/*
+ * Here we try to restore the original BIOS settings to avoid
+ * upsetting it.
+ */
+
+static int i8042_pm_reset(struct device *dev)
+{
+	i8042_controller_reset();
+
+	return 0;
+}
+
+static int i8042_pm_resume(struct device *dev)
+{
+	/*
+	 * On resume from S2R we always try to reset the controller
+	 * to bring it in a sane state. (In case of S2D we expect
+	 * BIOS to reset the controller for us.)
+	 */
+	return i8042_controller_resume(true);
+}
+
 static int i8042_pm_thaw(struct device *dev)
 {
 	i8042_interrupt(0, NULL);
@@ -1169,9 +1179,14 @@ static int i8042_pm_thaw(struct device *dev)
 	return 0;
 }
 
+static int i8042_pm_restore(struct device *dev)
+{
+	return i8042_controller_resume(false);
+}
+
 static const struct dev_pm_ops i8042_pm_ops = {
 	.suspend	= i8042_pm_reset,
-	.resume		= i8042_pm_restore,
+	.resume		= i8042_pm_resume,
 	.thaw		= i8042_pm_thaw,
 	.poweroff	= i8042_pm_reset,
 	.restore	= i8042_pm_restore,
@@ -1389,9 +1404,11 @@ static int __init i8042_probe(struct platform_device *dev)
 
 	i8042_platform_device = dev;
 
-	error = i8042_controller_selftest();
-	if (error)
-		return error;
+	if (i8042_reset) {
+		error = i8042_controller_selftest();
+		if (error)
+			return error;
+	}
 
 	error = i8042_controller_init();
 	if (error)

drivers/input/tablet/wacom_wac.c

@@ -158,6 +158,39 @@ static int wacom_ptu_irq(struct wacom_wac *wacom)
 	return 1;
 }
 
+static int wacom_dtu_irq(struct wacom_wac *wacom)
+{
+	struct wacom_features *features = &wacom->features;
+	char *data = wacom->data;
+	struct input_dev *input = wacom->input;
+	int prox = data[1] & 0x20, pressure;
+
+	dbg("wacom_dtu_irq: received report #%d", data[0]);
+
+	if (prox) {
+		/* Going into proximity select tool */
+		wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+		if (wacom->tool[0] == BTN_TOOL_PEN)
+			wacom->id[0] = STYLUS_DEVICE_ID;
+		else
+			wacom->id[0] = ERASER_DEVICE_ID;
+	}
+	input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+	input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
+	input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
+	input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
+	pressure = ((data[7] & 0x01) << 8) | data[6];
+	if (pressure < 0)
+		pressure = features->pressure_max + pressure + 1;
+	input_report_abs(input, ABS_PRESSURE, pressure);
+	input_report_key(input, BTN_TOUCH, data[1] & 0x05);
+	if (!prox) /* out-prox */
+		wacom->id[0] = 0;
+	input_report_key(input, wacom->tool[0], prox);
+	input_report_abs(input, ABS_MISC, wacom->id[0]);
+	return 1;
+}
+
 static int wacom_graphire_irq(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
@@ -845,6 +878,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		sync = wacom_ptu_irq(wacom_wac);
 		break;
 
+	case DTU:
+		sync = wacom_dtu_irq(wacom_wac);
+		break;
+
 	case INTUOS:
 	case INTUOS3S:
 	case INTUOS3:
@@ -1030,6 +1067,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 	case PL:
 	case PTU:
+	case DTU:
 		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
 		__set_bit(BTN_STYLUS, input_dev->keybit);
 		__set_bit(BTN_STYLUS2, input_dev->keybit);
@@ -1155,6 +1193,10 @@ static const struct wacom_features wacom_features_0xC6 =
 	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023, 63, WACOM_BEE };
 static const struct wacom_features wacom_features_0xC7 =
 	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,  0, PL };
+static const struct wacom_features wacom_features_0xCE =
+	{ "Wacom DTU2231",        WACOM_PKGLEN_GRAPHIRE,  47864, 27011,  511,  0, DTU };
+static const struct wacom_features wacom_features_0xF0 =
+	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,  0, DTU };
 static const struct wacom_features wacom_features_0xCC =
 	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047, 63, WACOM_21UX2 };
 static const struct wacom_features wacom_features_0x90 =
@@ -1234,6 +1276,8 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xC5) },
 	{ USB_DEVICE_WACOM(0xC6) },
 	{ USB_DEVICE_WACOM(0xC7) },
+	{ USB_DEVICE_WACOM(0xCE) },
+	{ USB_DEVICE_WACOM(0xF0) },
 	{ USB_DEVICE_WACOM(0xCC) },
 	{ USB_DEVICE_WACOM(0x90) },
 	{ USB_DEVICE_WACOM(0x93) },

drivers/input/tablet/wacom_wac.h

@@ -43,6 +43,7 @@ enum {
 	WACOM_G4,
 	PTU,
 	PL,
+	DTU,
 	INTUOS,
 	INTUOS3S,
 	INTUOS3,

drivers/input/touchscreen/Kconfig

@@ -55,37 +55,36 @@ config TOUCHSCREEN_AD7877
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7877.
 
-config TOUCHSCREEN_AD7879_I2C
-	tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
-	depends on I2C
-	select TOUCHSCREEN_AD7879
+config TOUCHSCREEN_AD7879
+	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
 	help
-	  Say Y here if you have a touchscreen interface using the
-	  AD7879-1/AD7889-1 controller, and your board-specific
-	  initialization code includes that in its table of I2C devices.
+	  Say Y here if you want to support a touchscreen interface using
+	  the AD7879-1/AD7889-1 controller.
 
-	  If unsure, say N (but it's safe to say "Y").
+	  You should select a bus connection too.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7879.
 
+config TOUCHSCREEN_AD7879_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_AD7879 && I2C
+	help
+	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7879-i2c.
+
 config TOUCHSCREEN_AD7879_SPI
-	tristate "AD7879 based touchscreens: AD7879 SPI Interface"
-	depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
-	select TOUCHSCREEN_AD7879
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
 	help
-	  Say Y here if you have a touchscreen interface using the
-	  AD7879/AD7889 controller, and your board-specific initialization
-	  code includes that in its table of SPI devices.
+	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
 
 	  If unsure, say N (but it's safe to say "Y").
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ad7879.
-
-config TOUCHSCREEN_AD7879
-	tristate
-	default n
+	  module will be called ad7879-spi.
 
 config TOUCHSCREEN_BITSY
 	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
@@ -99,6 +98,20 @@ config TOUCHSCREEN_BITSY
 	  To compile this driver as a module, choose M here: the
 	  module will be called h3600_ts_input.
 
+config TOUCHSCREEN_CY8CTMG110
+	tristate "cy8ctmg110 touchscreen"
+	depends on I2C
+	depends on GPIOLIB
+
+	help
+	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
+	  an AAVA device.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cy8ctmg110_ts.
+
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
@@ -292,6 +305,18 @@ config TOUCHSCREEN_PENMOUNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called penmount.
 
+config TOUCHSCREEN_QT602240
+	tristate "QT602240 I2C Touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qt602240_ts.
+
 config TOUCHSCREEN_MIGOR
 	tristate "Renesas MIGO-R touchscreen"
 	depends on SH_MIGOR && I2C
@@ -540,9 +565,9 @@ config TOUCHSCREEN_USB_ZYTRONIC
 	bool "Zytronic controller" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
-config TOUCHSCREEN_USB_ETT_TC5UH
+config TOUCHSCREEN_USB_ETT_TC45USB
 	default y
-	bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
+	bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_NEXIO

drivers/input/touchscreen/Makefile

@@ -9,9 +9,13 @@ wm97xx-ts-y := wm97xx-core.o
 obj-$(CONFIG_TOUCHSCREEN_88PM860X)	+= 88pm860x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_AD7877)	+= ad7877.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879)	+= ad7879.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C)	+= ad7879-i2c.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
+obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
@@ -30,6 +34,7 @@ obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o
 obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
+obj-$(CONFIG_TOUCHSCREEN_QT602240)	+= qt602240_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
@@ -38,7 +43,6 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
-obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o

drivers/input/touchscreen/ad7879-i2c.c

+/*
+ * AD7879-1/AD7889-1 touchscreen (I2C bus)
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include "ad7879.h"
+
+#define AD7879_DEVID		0x79	/* AD7879-1/AD7889-1 */
+
+#ifdef CONFIG_PM
+static int ad7879_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+	struct ad7879 *ts = i2c_get_clientdata(client);
+
+	ad7879_suspend(ts);
+
+	return 0;
+}
+
+static int ad7879_i2c_resume(struct i2c_client *client)
+{
+	struct ad7879 *ts = i2c_get_clientdata(client);
+
+	ad7879_resume(ts);
+
+	return 0;
+}
+#else
+# define ad7879_i2c_suspend NULL
+# define ad7879_i2c_resume  NULL
+#endif
+
+/* All registers are word-sized.
+ * AD7879 uses a high-byte first convention.
+ */
+static int ad7879_i2c_read(struct device *dev, u8 reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+static int ad7879_i2c_multi_read(struct device *dev,
+				 u8 first_reg, u8 count, u16 *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 idx;
+
+	i2c_smbus_read_i2c_block_data(client, first_reg, count * 2, (u8 *)buf);
+
+	for (idx = 0; idx < count; ++idx)
+		buf[idx] = swab16(buf[idx]);
+
+	return 0;
+}
+
+static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_write_word_data(client, reg, swab16(val));
+}
+
+static const struct ad7879_bus_ops ad7879_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.read		= ad7879_i2c_read,
+	.multi_read	= ad7879_i2c_multi_read,
+	.write		= ad7879_i2c_write,
+};
+
+static int __devinit ad7879_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct ad7879 *ts;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WORD_DATA)) {
+		dev_err(&client->dev, "SMBUS Word Data not Supported\n");
+		return -EIO;
+	}
+
+	ts = ad7879_probe(&client->dev, AD7879_DEVID, client->irq,
+			  &ad7879_i2c_bus_ops);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	i2c_set_clientdata(client, ts);
+
+	return 0;
+}
+
+static int __devexit ad7879_i2c_remove(struct i2c_client *client)
+{
+	struct ad7879 *ts = i2c_get_clientdata(client);
+
+	ad7879_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id ad7879_id[] = {
+	{ "ad7879", 0 },
+	{ "ad7889", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ad7879_id);
+
+static struct i2c_driver ad7879_i2c_driver = {
+	.driver = {
+		.name	= "ad7879",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad7879_i2c_probe,
+	.remove		= __devexit_p(ad7879_i2c_remove),
+	.suspend	= ad7879_i2c_suspend,
+	.resume		= ad7879_i2c_resume,
+	.id_table	= ad7879_id,
+};
+
+static int __init ad7879_i2c_init(void)
+{
+	return i2c_add_driver(&ad7879_i2c_driver);
+}
+module_init(ad7879_i2c_init);
+
+static void __exit ad7879_i2c_exit(void)
+{
+	i2c_del_driver(&ad7879_i2c_driver);
+}
+module_exit(ad7879_i2c_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i2c:ad7879");

drivers/input/touchscreen/ad7879.h

+/*
+ * AD7879/AD7889 touchscreen (bus interfaces)
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _AD7879_H_
+#define _AD7879_H_
+
+#include <linux/types.h>
+
+struct ad7879;
+struct device;
+
+struct ad7879_bus_ops {
+	u16 bustype;
+	int (*read)(struct device *dev, u8 reg);
+	int (*multi_read)(struct device *dev, u8 first_reg, u8 count, u16 *buf);
+	int (*write)(struct device *dev, u8 reg, u16 val);
+};
+
+void ad7879_suspend(struct ad7879 *);
+void ad7879_resume(struct ad7879 *);
+struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq,
+			    const struct ad7879_bus_ops *bops);
+void ad7879_remove(struct ad7879 *);
+
+#endif

drivers/input/touchscreen/mcs5000_ts.c

@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/i2c/mcs5000_ts.h>
+#include <linux/i2c/mcs.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/irq.h>
@@ -105,7 +105,7 @@ enum mcs5000_ts_read_offset {
 struct mcs5000_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
-	const struct mcs5000_ts_platform_data *platform_data;
+	const struct mcs_platform_data *platform_data;
 };
 
 static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
@@ -164,7 +164,7 @@ static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
 
 static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
 {
-	const struct mcs5000_ts_platform_data *platform_data =
+	const struct mcs_platform_data *platform_data =
 		data->platform_data;
 	struct i2c_client *client = data->client;
 

drivers/input/touchscreen/tps6507x-ts.c

@@ -355,9 +355,6 @@ static int __devexit tps6507x_ts_remove(struct platform_device *pdev)
 	struct tps6507x_ts *tsc = tps6507x_dev->ts;
 	struct input_dev *input_dev = tsc->input_dev;
 
-	if (!tsc)
-		return 0;
-
 	cancel_delayed_work_sync(&tsc->work);
 	destroy_workqueue(tsc->wq);
 

include/linux/i2c/adp5588.h

@@ -78,6 +78,40 @@
 
 #define ADP5588_KEYMAPSIZE	80
 
+#define GPI_PIN_ROW0 97
+#define GPI_PIN_ROW1 98
+#define GPI_PIN_ROW2 99
+#define GPI_PIN_ROW3 100
+#define GPI_PIN_ROW4 101
+#define GPI_PIN_ROW5 102
+#define GPI_PIN_ROW6 103
+#define GPI_PIN_ROW7 104
+#define GPI_PIN_COL0 105
+#define GPI_PIN_COL1 106
+#define GPI_PIN_COL2 107
+#define GPI_PIN_COL3 108
+#define GPI_PIN_COL4 109
+#define GPI_PIN_COL5 110
+#define GPI_PIN_COL6 111
+#define GPI_PIN_COL7 112
+#define GPI_PIN_COL8 113
+#define GPI_PIN_COL9 114
+
+#define GPI_PIN_ROW_BASE GPI_PIN_ROW0
+#define GPI_PIN_ROW_END GPI_PIN_ROW7
+#define GPI_PIN_COL_BASE GPI_PIN_COL0
+#define GPI_PIN_COL_END GPI_PIN_COL9
+
+#define GPI_PIN_BASE GPI_PIN_ROW_BASE
+#define GPI_PIN_END GPI_PIN_COL_END
+
+#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)
+
+struct adp5588_gpi_map {
+	unsigned short pin;
+	unsigned short sw_evt;
+};
+
 struct adp5588_kpad_platform_data {
 	int rows;			/* Number of rows */
 	int cols;			/* Number of columns */
@@ -87,6 +121,9 @@ struct adp5588_kpad_platform_data {
 	unsigned en_keylock:1;		/* Enable Key Lock feature */
 	unsigned short unlock_key1;	/* Unlock Key 1 */
 	unsigned short unlock_key2;	/* Unlock Key 2 */
+	const struct adp5588_gpi_map *gpimap;
+	unsigned short gpimapsize;
+	const struct adp5588_gpio_platform_data *gpio_data;
 };
 
 struct adp5588_gpio_platform_data {

include/linux/i2c/mcs5000_ts.h → include/linux/i2c/mcs.h

 /*
- * mcs5000_ts.h
- *
- * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd
  * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -11,14 +10,25 @@
  *
  */
 
-#ifndef __LINUX_MCS5000_TS_H
-#define __LINUX_MCS5000_TS_H
+#ifndef __LINUX_MCS_H
+#define __LINUX_MCS_H
+
+#define MCS_KEY_MAP(v, c)	((((v) & 0xff) << 16) | ((c) & 0xffff))
+#define MCS_KEY_VAL(v)		(((v) >> 16) & 0xff)
+#define MCS_KEY_CODE(v)		((v) & 0xffff)
 
-/* platform data for the MELFAS MCS-5000 touchscreen driver */
-struct mcs5000_ts_platform_data {
+struct mcs_platform_data {
 	void (*cfg_pin)(void);
-	int x_size;
-	int y_size;
+
+	/* touchscreen */
+	unsigned int x_size;
+	unsigned int y_size;
+
+	/* touchkey */
+	const u32 *keymap;
+	unsigned int keymap_size;
+	unsigned int key_maxval;
+	bool no_autorepeat;
 };
 
-#endif	/* __LINUX_MCS5000_TS_H */
+#endif	/* __LINUX_MCS_H */

include/linux/i2c/qt602240_ts.h

+/*
+ * AT42QT602240/ATMXT224 Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_QT602240_TS_H
+#define __LINUX_QT602240_TS_H
+
+/* Orient */
+#define QT602240_NORMAL			0x0
+#define QT602240_DIAGONAL		0x1
+#define QT602240_HORIZONTAL_FLIP	0x2
+#define QT602240_ROTATED_90_COUNTER	0x3
+#define QT602240_VERTICAL_FLIP		0x4
+#define QT602240_ROTATED_90		0x5
+#define QT602240_ROTATED_180		0x6
+#define QT602240_DIAGONAL_COUNTER	0x7
+
+/* The platform data for the AT42QT602240/ATMXT224 touchscreen driver */
+struct qt602240_platform_data {
+	unsigned int x_line;
+	unsigned int y_line;
+	unsigned int x_size;
+	unsigned int y_size;
+	unsigned int blen;
+	unsigned int threshold;
+	unsigned int voltage;
+	unsigned char orient;
+};
+
+#endif /* __LINUX_QT602240_TS_H */