提交 cf87a6e2 编写于 作者: S Sascha Hauer

ARM: mxc: Fix i2c_board_info definitions

Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
上级 a961bf38
......@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
static struct i2c_board_info mx1ads_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf857x", 0x22),
.type = "pcf8575",
I2C_BOARD_INFO("pcf8575", 0x22),
.platform_data = &pcf857x_data[0],
}, {
I2C_BOARD_INFO("pcf857x", 0x24),
.type = "pcf8575",
I2C_BOARD_INFO("pcf8575", 0x24),
.platform_data = &pcf857x_data[1],
},
};
......
......@@ -135,8 +135,7 @@ static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
{
I2C_BOARD_INFO("rtc-pcf8563", 0x51),
.type = "pcf8563"
I2C_BOARD_INFO("pcf8563", 0x51),
},
};
......
......@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
};
static struct i2c_board_info pcm038_i2c_devices[] = {
[0] = {
{
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
},
[1] = {
I2C_BOARD_INFO("rtc-pcf8563", 0x51),
.type = "pcf8563"
},
[2] = {
}, {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("lm75", 0x4a),
.type = "lm75"
}
};
......
......@@ -339,8 +339,7 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
I2C_BOARD_INFO("rtc-pcf8563", 0x51),
.type = "pcf8563",
I2C_BOARD_INFO("pcf8563", 0x51),
}
};
......
......@@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
I2C_BOARD_INFO("rtc-pcf8563", 0x51),
.type = "pcf8563",
I2C_BOARD_INFO("pcf8563", 0x51),
}
};
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册