Merge tag 'perf-urgent-for-mingo-4.12-20170504' of...

Merge tag 'perf-urgent-for-mingo-4.12-20170504' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Fix AArch64 objdump disasm comment char in 'perf annotate' (Kim Phillips)

- Fix documentation spelling mistakes (Kim Phillips)

- Don't fail 'perf test kmod-path' if compressed modules aren't
  supported (Kim Phillips)

Infrastructure changes:

- Fix sched_getcpu() feature test when included in test-all.c redefining
  _GNU_SOURCE (Arnaldo Carvalho de Melo)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

tools/build/feature/test-sched_getcpu.c

+#ifndef _GNU_SOURCE
 #define _GNU_SOURCE
+#endif
 #include <sched.h>
 
 int main(void)

tools/perf/Documentation/perf-c2c.txt

@@ -76,7 +76,7 @@ REPORT OPTIONS
 
 -c::
 --coalesce::
-	Specify sorintg fields for single cacheline display.
+	Specify sorting fields for single cacheline display.
 	Following fields are available: tid,pid,iaddr,dso
 	(see COALESCE)
 
@@ -106,7 +106,7 @@ REPORT OPTIONS
 
 -d::
 --display::
-	Siwtch to HITM type (rmt, lcl) to display and sort on. Total HITMs as default.
+	Switch to HITM type (rmt, lcl) to display and sort on. Total HITMs as default.
 
 C2C RECORD
 ----------

tools/perf/Documentation/perf-record.txt

@@ -225,7 +225,7 @@ OPTIONS
 	the libunwind or libdw library) should be used instead.
 	Using the "lbr" method doesn't require any compiler options. It
 	will produce call graphs from the hardware LBR registers. The
-	main limition is that it is only available on new Intel
+	main limitation is that it is only available on new Intel
 	platforms, such as Haswell. It can only get user call chain. It
 	doesn't work with branch stack sampling at the same time.
 

tools/perf/Documentation/perf-report.txt

@@ -182,7 +182,7 @@ OPTIONS
 --parent=<regex>::
         A regex filter to identify parent. The parent is a caller of this
 	function and searched through the callchain, thus it requires callchain
-	information recorded. The pattern is in the exteneded regex format and
+	information recorded. The pattern is in the extended regex format and
 	defaults to "\^sys_|^do_page_fault", see '--sort parent'.
 
 -x::
@@ -207,8 +207,8 @@ OPTIONS
 -g::
 --call-graph=<print_type,threshold[,print_limit],order,sort_key[,branch],value>::
         Display call chains using type, min percent threshold, print limit,
-	call order, sort key, optional branch and value.  Note that ordering of
-	parameters is not fixed so any parement can be given in an arbitraty order.
+	call order, sort key, optional branch and value.  Note that ordering
+	is not fixed so any parameter can be given in an arbitrary order.
 	One exception is the print_limit which should be preceded by threshold.
 
 	print_type can be either:

tools/perf/Documentation/perf.data-file-format.txt

@@ -270,7 +270,7 @@ When the event stream contains multiple events each event is identified
 by an ID. This can be either through the PERF_SAMPLE_ID or the
 PERF_SAMPLE_IDENTIFIER header. The PERF_SAMPLE_IDENTIFIER header is
 at a fixed offset from the event header, which allows reliable
-parsing of the header. Relying on ID may be ambigious.
+parsing of the header. Relying on ID may be ambiguous.
 IDENTIFIER is only supported by newer Linux kernels.
 
 Perf record specific events:
@@ -288,7 +288,7 @@ struct attr_event {
 	uint64_t id[];
 };
 
-	PERF_RECORD_HEADER_EVENT_TYPE		= 65, /* depreceated */
+	PERF_RECORD_HEADER_EVENT_TYPE		= 65, /* deprecated */
 
 #define MAX_EVENT_NAME 64
 

tools/perf/Documentation/tips.txt

@@ -23,7 +23,7 @@ For memory address profiling, try: perf mem record / perf mem report
 For tracepoint events, try: perf report -s trace_fields
 To record callchains for each sample: perf record -g
 To record every process run by a user: perf record -u <user>
-Skip collecing build-id when recording: perf record -B
+Skip collecting build-id when recording: perf record -B
 To change sampling frequency to 100 Hz: perf record -F 100
 See assembly instructions with percentage: perf annotate <symbol>
 If you prefer Intel style assembly, try: perf annotate -M intel

tools/perf/arch/arm64/annotate/instructions.c

@@ -50,7 +50,7 @@ static int arm64__annotate_init(struct arch *arch)
 	arch->initialized = true;
 	arch->priv	  = arm;
 	arch->associate_instruction_ops   = arm64__associate_instruction_ops;
-	arch->objdump.comment_char	  = ';';
+	arch->objdump.comment_char	  = '/';
 	arch->objdump.skip_functions_char = '+';
 	return 0;
 

tools/perf/tests/kmod-path.c

@@ -61,6 +61,7 @@ int test__kmod_path__parse(int subtest __maybe_unused)
 	M("/xxxx/xxxx/x-x.ko", PERF_RECORD_MISC_KERNEL, true);
 	M("/xxxx/xxxx/x-x.ko", PERF_RECORD_MISC_USER, false);
 
+#ifdef HAVE_ZLIB_SUPPORT
 	/* path                alloc_name  alloc_ext   kmod  comp  name   ext */
 	T("/xxxx/xxxx/x.ko.gz", true     , true      , true, true, "[x]", "gz");
 	T("/xxxx/xxxx/x.ko.gz", false    , true      , true, true, NULL , "gz");
@@ -96,6 +97,7 @@ int test__kmod_path__parse(int subtest __maybe_unused)
 	M("x.ko.gz", PERF_RECORD_MISC_CPUMODE_UNKNOWN, true);
 	M("x.ko.gz", PERF_RECORD_MISC_KERNEL, true);
 	M("x.ko.gz", PERF_RECORD_MISC_USER, false);
+#endif
 
 	/* path            alloc_name  alloc_ext  kmod  comp   name             ext */
 	T("[test_module]", true      , true     , true, false, "[test_module]", NULL);

tools/perf/util/event.h

@@ -229,7 +229,7 @@ struct build_id_event {
 enum perf_user_event_type { /* above any possible kernel type */
 	PERF_RECORD_USER_TYPE_START		= 64,
 	PERF_RECORD_HEADER_ATTR			= 64,
-	PERF_RECORD_HEADER_EVENT_TYPE		= 65, /* depreceated */
+	PERF_RECORD_HEADER_EVENT_TYPE		= 65, /* deprecated */
 	PERF_RECORD_HEADER_TRACING_DATA		= 66,
 	PERF_RECORD_HEADER_BUILD_ID		= 67,
 	PERF_RECORD_FINISHED_ROUND		= 68,