Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 cefd3e71 编写于 作者: R Russell King
浏览文件
操作

Merge branch 'mach_memory_h' of git://git.linaro.org/people/nico/linux into devel-stable

上级 a26bce12 0cdc8b92
展开全部 隐藏空白更改
内联 并排
Showing with 347 addition and 1168 deletion
arch/arm/Kconfig
浏览文件 @ cefd3e71
...@@ -196,7 +196,8 @@ config VECTORS_BASE ...@@ -196,7 +196,8 @@ config VECTORS_BASE
The base address of exception vectors. The base address of exception vectors.
config ARM_PATCH_PHYS_VIRT config ARM_PATCH_PHYS_VIRT
bool "Patch physical to virtual translations at runtime" bool "Patch physical to virtual translations at runtime" if EMBEDDED
default y
depends on !XIP_KERNEL && MMU depends on !XIP_KERNEL && MMU
depends on !ARCH_REALVIEW || !SPARSEMEM depends on !ARCH_REALVIEW || !SPARSEMEM
help help
...@@ -205,16 +206,25 @@ config ARM_PATCH_PHYS_VIRT ...@@ -205,16 +206,25 @@ config ARM_PATCH_PHYS_VIRT
kernel in system memory. kernel in system memory.
This can only be used with non-XIP MMU kernels where the base This can only be used with non-XIP MMU kernels where the base
of physical memory is at a 16MB boundary, or theoretically 64K of physical memory is at a 16MB boundary.
for the MSM machine class.
config ARM_PATCH_PHYS_VIRT_16BIT Only disable this option if you know that you do not require
def_bool y this feature (eg, building a kernel for a single machine) and
depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM you need to shrink the kernel to the minimal size.
config NEED_MACH_MEMORY_H
bool
help
Select this when mach/memory.h is required to provide special
definitions for this platform. The need for mach/memory.h should
be avoided when possible.
config PHYS_OFFSET
hex "Physical address of main memory"
depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
help help
This option extends the physical to virtual translation patching Please provide the physical address corresponding to the
to allow physical memory down to a theoretical minimum of 64K location of main memory in your system.
boundaries.
source "init/Kconfig" source "init/Kconfig"
...@@ -247,6 +257,7 @@ config ARCH_INTEGRATOR ...@@ -247,6 +257,7 @@ config ARCH_INTEGRATOR
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ select PLAT_VERSATILE_FPGA_IRQ
select NEED_MACH_MEMORY_H
help help
Support for ARM's Integrator platform. Support for ARM's Integrator platform.
...@@ -262,6 +273,7 @@ config ARCH_REALVIEW ...@@ -262,6 +273,7 @@ config ARCH_REALVIEW
select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804 select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB select GPIO_PL061 if GPIOLIB
select NEED_MACH_MEMORY_H
help help
This enables support for ARM Ltd RealView boards. This enables support for ARM Ltd RealView boards.
...@@ -302,7 +314,6 @@ config ARCH_AT91 ...@@ -302,7 +314,6 @@ config ARCH_AT91
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK select HAVE_CLK
select CLKDEV_LOOKUP select CLKDEV_LOOKUP
select ARM_PATCH_PHYS_VIRT if MMU
help help
This enables support for systems based on the Atmel AT91RM9200, This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors. AT91SAM9 and AT91CAP9 processors.
...@@ -323,6 +334,7 @@ config ARCH_CLPS711X ...@@ -323,6 +334,7 @@ config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based" bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T select CPU_ARM720T
select ARCH_USES_GETTIMEOFFSET select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
help help
Support for Cirrus Logic 711x/721x based boards. Support for Cirrus Logic 711x/721x based boards.
...@@ -363,6 +375,7 @@ config ARCH_EBSA110 ...@@ -363,6 +375,7 @@ config ARCH_EBSA110
select ISA select ISA
select NO_IOPORT select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
help help
This is an evaluation board for the StrongARM processor available This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an from Digital. It has limited hardware on-board, including an
...@@ -378,6 +391,7 @@ config ARCH_EP93XX ...@@ -378,6 +391,7 @@ config ARCH_EP93XX
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_USES_GETTIMEOFFSET select ARCH_USES_GETTIMEOFFSET
select NEED_MEMORY_H
help help
This enables support for the Cirrus EP93xx series of CPUs. This enables support for the Cirrus EP93xx series of CPUs.
...@@ -386,6 +400,7 @@ config ARCH_FOOTBRIDGE ...@@ -386,6 +400,7 @@ config ARCH_FOOTBRIDGE
select CPU_SA110 select CPU_SA110
select FOOTBRIDGE select FOOTBRIDGE
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select NEED_MACH_MEMORY_H
help help
Support for systems based on the DC21285 companion chip Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
...@@ -435,6 +450,7 @@ config ARCH_IOP13XX ...@@ -435,6 +450,7 @@ config ARCH_IOP13XX
select PCI select PCI
select ARCH_SUPPORTS_MSI select ARCH_SUPPORTS_MSI
select VMSPLIT_1G select VMSPLIT_1G
select NEED_MACH_MEMORY_H
help help
Support for Intel's IOP13XX (XScale) family of processors. Support for Intel's IOP13XX (XScale) family of processors.
...@@ -465,6 +481,7 @@ config ARCH_IXP23XX ...@@ -465,6 +481,7 @@ config ARCH_IXP23XX
select CPU_XSC3 select CPU_XSC3
select PCI select PCI
select ARCH_USES_GETTIMEOFFSET select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
help help
Support for Intel's IXP23xx (XScale) family of processors. Support for Intel's IXP23xx (XScale) family of processors.
...@@ -474,6 +491,7 @@ config ARCH_IXP2000 ...@@ -474,6 +491,7 @@ config ARCH_IXP2000
select CPU_XSCALE select CPU_XSCALE
select PCI select PCI
select ARCH_USES_GETTIMEOFFSET select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
help help
Support for Intel's IXP2400/2800 (XScale) family of processors. Support for Intel's IXP2400/2800 (XScale) family of processors.
...@@ -567,6 +585,7 @@ config ARCH_KS8695 ...@@ -567,6 +585,7 @@ config ARCH_KS8695
select CPU_ARM922T select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
help help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices. System-on-Chip devices.
...@@ -658,6 +677,7 @@ config ARCH_SHMOBILE ...@@ -658,6 +677,7 @@ config ARCH_SHMOBILE
select SPARSE_IRQ select SPARSE_IRQ
select MULTI_IRQ_HANDLER select MULTI_IRQ_HANDLER
select PM_GENERIC_DOMAINS if PM select PM_GENERIC_DOMAINS if PM
select NEED_MACH_MEMORY_H
help help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms. Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
...@@ -672,6 +692,7 @@ config ARCH_RPC ...@@ -672,6 +692,7 @@ config ARCH_RPC
select NO_IOPORT select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
help help
On the Acorn Risc-PC, Linux can support the internal IDE disk and On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive. CD-ROM interface, serial and parallel port, and the floppy drive.
...@@ -690,6 +711,7 @@ config ARCH_SA1100 ...@@ -690,6 +711,7 @@ config ARCH_SA1100
select HAVE_SCHED_CLOCK select HAVE_SCHED_CLOCK
select TICK_ONESHOT select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select NEED_MACH_MEMORY_H
help help
Support for StrongARM 11x0 based boards. Support for StrongARM 11x0 based boards.
...@@ -782,6 +804,7 @@ config ARCH_S5PV210 ...@@ -782,6 +804,7 @@ config ARCH_S5PV210
select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_MEMORY_H
help help
Samsung S5PV210/S5PC110 series based systems Samsung S5PV210/S5PC110 series based systems
...@@ -798,6 +821,7 @@ config ARCH_EXYNOS4 ...@@ -798,6 +821,7 @@ config ARCH_EXYNOS4
select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_MEMORY_H
help help
Samsung EXYNOS4 series based systems Samsung EXYNOS4 series based systems
...@@ -809,6 +833,7 @@ config ARCH_SHARK ...@@ -809,6 +833,7 @@ config ARCH_SHARK
select ZONE_DMA select ZONE_DMA
select PCI select PCI
select ARCH_USES_GETTIMEOFFSET select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
help help
Support for the StrongARM based Digital DNARD machine, also known Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>). as "Shark" (<http://www.shark-linux.de/shark.html>).
...@@ -836,6 +861,7 @@ config ARCH_U300 ...@@ -836,6 +861,7 @@ config ARCH_U300
select CLKDEV_LOOKUP select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV select HAVE_MACH_CLKDEV
select GENERIC_GPIO select GENERIC_GPIO
select NEED_MACH_MEMORY_H
help help
Support for ST-Ericsson U300 series mobile platforms. Support for ST-Ericsson U300 series mobile platforms.
......
arch/arm/Makefile
浏览文件 @ cefd3e71
...@@ -128,6 +128,9 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ...@@ -128,6 +128,9 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000
ifeq ($(CONFIG_ARCH_SA1100),y) ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000 textofs-$(CONFIG_SA1111) := 0x00208000
endif endif
textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically # Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name. # by CONFIG_* macro name.
......
arch/arm/include/asm/memory.h
浏览文件 @ cefd3e71
...@@ -16,9 +16,12 @@ ...@@ -16,9 +16,12 @@
#include <linux/compiler.h> #include <linux/compiler.h>
#include <linux/const.h> #include <linux/const.h>
#include <linux/types.h> #include <linux/types.h>
#include <mach/memory.h>
#include <asm/sizes.h> #include <asm/sizes.h>
#ifdef CONFIG_NEED_MACH_MEMORY_H
#include <mach/memory.h>
#endif
/* /*
* Allow for constants defined here to be used from assembly code * Allow for constants defined here to be used from assembly code
* by prepending the UL suffix only with actual C code compilation. * by prepending the UL suffix only with actual C code compilation.
...@@ -151,7 +154,6 @@ ...@@ -151,7 +154,6 @@
* so that all we need to do is modify the 8-bit constant field. * so that all we need to do is modify the 8-bit constant field.
*/ */
#define __PV_BITS_31_24 0x81000000 #define __PV_BITS_31_24 0x81000000
#define __PV_BITS_23_16 0x00810000
extern unsigned long __pv_phys_offset; extern unsigned long __pv_phys_offset;
#define PHYS_OFFSET __pv_phys_offset #define PHYS_OFFSET __pv_phys_offset
...@@ -169,9 +171,6 @@ static inline unsigned long __virt_to_phys(unsigned long x) ...@@ -169,9 +171,6 @@ static inline unsigned long __virt_to_phys(unsigned long x)
{ {
unsigned long t; unsigned long t;
__pv_stub(x, t, "add", __PV_BITS_31_24); __pv_stub(x, t, "add", __PV_BITS_31_24);
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
__pv_stub(t, t, "add", __PV_BITS_23_16);
#endif
return t; return t;
} }
...@@ -179,9 +178,6 @@ static inline unsigned long __phys_to_virt(unsigned long x) ...@@ -179,9 +178,6 @@ static inline unsigned long __phys_to_virt(unsigned long x)
{ {
unsigned long t; unsigned long t;
__pv_stub(x, t, "sub", __PV_BITS_31_24); __pv_stub(x, t, "sub", __PV_BITS_31_24);
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
__pv_stub(t, t, "sub", __PV_BITS_23_16);
#endif
return t; return t;
} }
#else #else
...@@ -191,7 +187,11 @@ static inline unsigned long __phys_to_virt(unsigned long x) ...@@ -191,7 +187,11 @@ static inline unsigned long __phys_to_virt(unsigned long x)
#endif #endif
#ifndef PHYS_OFFSET #ifndef PHYS_OFFSET
#ifdef PLAT_PHYS_OFFSET
#define PHYS_OFFSET PLAT_PHYS_OFFSET #define PHYS_OFFSET PLAT_PHYS_OFFSET
#else
#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
#endif
#endif #endif
/* /*
......
arch/arm/include/asm/module.h
浏览文件 @ cefd3e71
...@@ -31,11 +31,7 @@ struct mod_arch_specific { ...@@ -31,11 +31,7 @@ struct mod_arch_specific {
/* Add __virt_to_phys patching state as well */ /* Add __virt_to_phys patching state as well */
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
#define MODULE_ARCH_VERMAGIC_P2V "p2v16 "
#else
#define MODULE_ARCH_VERMAGIC_P2V "p2v8 " #define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
#endif
#else #else
#define MODULE_ARCH_VERMAGIC_P2V "" #define MODULE_ARCH_VERMAGIC_P2V ""
#endif #endif
......
arch/arm/kernel/debug.S
浏览文件 @ cefd3e71
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
#if defined(CONFIG_DEBUG_ICEDCC) #if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel @@ debug using ARM EmbeddedICE DCC channel
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
.endm .endm
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
...@@ -106,7 +106,7 @@ ...@@ -106,7 +106,7 @@
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2 .macro addruart_current, rx, tmp1, tmp2
addruart \tmp1, \tmp2 addruart \tmp1, \tmp2, \rx
mrc p15, 0, \rx, c1, c0 mrc p15, 0, \rx, c1, c0
tst \rx, #1 tst \rx, #1
moveq \rx, \tmp1 moveq \rx, \tmp1
......
arch/arm/kernel/head.S
浏览文件 @ cefd3e71
...@@ -95,7 +95,7 @@ ENTRY(stext) ...@@ -95,7 +95,7 @@ ENTRY(stext)
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
add r8, r8, r4 @ PHYS_OFFSET add r8, r8, r4 @ PHYS_OFFSET
#else #else
ldr r8, =PLAT_PHYS_OFFSET ldr r8, =PHYS_OFFSET @ always constant in this case
#endif #endif
/* /*
...@@ -234,7 +234,7 @@ __create_page_tables: ...@@ -234,7 +234,7 @@ __create_page_tables:
* This allows debug messages to be output * This allows debug messages to be output
* via a serial console before paging_init. * via a serial console before paging_init.
*/ */
addruart r7, r3 addruart r7, r3, r0
mov r3, r3, lsr #20 mov r3, r3, lsr #20
mov r3, r3, lsl #2 mov r3, r3, lsl #2
...@@ -488,13 +488,8 @@ __fixup_pv_table: ...@@ -488,13 +488,8 @@ __fixup_pv_table:
add r5, r5, r3 @ adjust table end address add r5, r5, r3 @ adjust table end address
add r7, r7, r3 @ adjust __pv_phys_offset address add r7, r7, r3 @ adjust __pv_phys_offset address
str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset
#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
mov r6, r3, lsr #24 @ constant for add/sub instructions mov r6, r3, lsr #24 @ constant for add/sub instructions
teq r3, r6, lsl #24 @ must be 16MiB aligned teq r3, r6, lsl #24 @ must be 16MiB aligned
#else
mov r6, r3, lsr #16 @ constant for add/sub instructions
teq r3, r6, lsl #16 @ must be 64kiB aligned
#endif
THUMB( it ne @ cross section branch ) THUMB( it ne @ cross section branch )
bne __error bne __error
str r6, [r7, #4] @ save to __pv_offset str r6, [r7, #4] @ save to __pv_offset
...@@ -510,20 +505,8 @@ ENDPROC(__fixup_pv_table) ...@@ -510,20 +505,8 @@ ENDPROC(__fixup_pv_table)
.text .text
__fixup_a_pv_table: __fixup_a_pv_table:
#ifdef CONFIG_THUMB2_KERNEL #ifdef CONFIG_THUMB2_KERNEL
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT lsls r6, #24
lsls r0, r6, #24 beq 2f
lsr r6, #8
beq 1f
clz r7, r0
lsr r0, #24
lsl r0, r7
bic r0, 0x0080
lsrs r7, #1
orrcs r0, #0x0080
orr r0, r0, r7, lsl #12
#endif
1: lsls r6, #24
beq 4f
clz r7, r6 clz r7, r6
lsr r6, #24 lsr r6, #24
lsl r6, r7 lsl r6, r7
...@@ -532,43 +515,25 @@ __fixup_a_pv_table: ...@@ -532,43 +515,25 @@ __fixup_a_pv_table:
orrcs r6, #0x0080 orrcs r6, #0x0080
orr r6, r6, r7, lsl #12 orr r6, r6, r7, lsl #12
orr r6, #0x4000 orr r6, #0x4000
b 4f b 2f
2: @ at this point the C flag is always clear 1: add r7, r3
add r7, r3 ldrh ip, [r7, #2]
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
ldrh ip, [r7]
tst ip, 0x0400 @ the i bit tells us LS or MS byte
beq 3f
cmp r0, #0 @ set C flag, and ...
biceq ip, 0x0400 @ immediate zero value has a special encoding
streqh ip, [r7] @ that requires the i bit cleared
#endif
3: ldrh ip, [r7, #2]
and ip, 0x8f00 and ip, 0x8f00
orrcc ip, r6 @ mask in offset bits 31-24 orr ip, r6 @ mask in offset bits 31-24
orrcs ip, r0 @ mask in offset bits 23-16
strh ip, [r7, #2] strh ip, [r7, #2]
4: cmp r4, r5 2: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot ldrcc r7, [r4], #4 @ use branch for delay slot
bcc 2b bcc 1b
bx lr bx lr
#else #else
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT b 2f
and r0, r6, #255 @ offset bits 23-16 1: ldr ip, [r7, r3]
mov r6, r6, lsr #8 @ offset bits 31-24
#else
mov r0, #0 @ just in case...
#endif
b 3f
2: ldr ip, [r7, r3]
bic ip, ip, #0x000000ff bic ip, ip, #0x000000ff
tst ip, #0x400 @ rotate shift tells us LS or MS byte orr ip, ip, r6 @ mask in offset bits 31-24
orrne ip, ip, r6 @ mask in offset bits 31-24
orreq ip, ip, r0 @ mask in offset bits 23-16
str ip, [r7, r3] str ip, [r7, r3]
3: cmp r4, r5 2: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot ldrcc r7, [r4], #4 @ use branch for delay slot
bcc 2b bcc 1b
mov pc, lr mov pc, lr
#endif #endif
ENDPROC(__fixup_a_pv_table) ENDPROC(__fixup_a_pv_table)
......
arch/arm/mach-at91/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/at91_dbgu.h> #include <mach/at91_dbgu.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
.endm .endm
......
arch/arm/mach-bcmring/include/mach/hardware.h
浏览文件 @ cefd3e71
...@@ -22,7 +22,6 @@ ...@@ -22,7 +22,6 @@
#define __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h> #include <asm/sizes.h>
#include <mach/memory.h>
#include <cfg_global.h> #include <cfg_global.h>
#include <mach/csp/mm_io.h> #include <mach/csp/mm_io.h>
...@@ -31,7 +30,7 @@ ...@@ -31,7 +30,7 @@
* *_SIZE is the size of the region * *_SIZE is the size of the region
* *_BASE is the virtual address * *_BASE is the virtual address
*/ */
#define RAM_START PLAT_PHYS_OFFSET #define RAM_START PHYS_OFFSET
#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) #define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
#define RAM_BASE PAGE_OFFSET #define RAM_BASE PAGE_OFFSET
......
arch/arm/mach-bcmring/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*****************************************************************************
* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available at
* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* consent.
*****************************************************************************/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#include <cfg_global.h>
/*
* Physical vs virtual RAM address space conversion. These are
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
#endif
arch/arm/mach-clps711x/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/hardware/clps7111.h> #include <asm/hardware/clps7111.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
#ifndef CONFIG_DEBUG_CLPS711X_UART2 #ifndef CONFIG_DEBUG_CLPS711X_UART2
mov \rp, #0x0000 @ UART1 mov \rp, #0x0000 @ UART1
#else #else
......
arch/arm/mach-cns3xxx/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
.macro addruart,rp,rv .macro addruart,rp,rv,tmp
mov \rp, #0x00009000 mov \rp, #0x00009000
orr \rv, \rp, #0xf0000000 @ virtual base orr \rv, \rp, #0xf0000000 @ virtual base
orr \rp, \rp, #0x10000000 orr \rp, \rp, #0x10000000
......
arch/arm/mach-cns3xxx/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
#define __phys_to_bus(x) ((x) + PHYS_OFFSET)
#define __bus_to_phys(x) ((x) - PHYS_OFFSET)
#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
#endif
arch/arm/mach-davinci/cpuidle.c
浏览文件 @ cefd3e71
...@@ -19,7 +19,7 @@ ...@@ -19,7 +19,7 @@
#include <asm/proc-fns.h> #include <asm/proc-fns.h>
#include <mach/cpuidle.h> #include <mach/cpuidle.h>
#include <mach/memory.h> #include <mach/ddr2.h>
#define DAVINCI_CPUIDLE_MAX_STATES 2 #define DAVINCI_CPUIDLE_MAX_STATES 2
......
arch/arm/mach-davinci/include/mach/ddr2.h 0 → 100644
浏览文件 @ cefd3e71
#define DDR2_SDRCR_OFFSET 0xc
#define DDR2_SRPD_BIT (1 << 23)
#define DDR2_MCLKSTOPEN_BIT (1 << 30)
#define DDR2_LPMODEN_BIT (1 << 31)
arch/arm/mach-davinci/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -18,56 +18,50 @@ ...@@ -18,56 +18,50 @@
#include <linux/serial_reg.h> #include <linux/serial_reg.h>
#include <asm/memory.h>
#include <mach/serial.h> #include <mach/serial.h>
#define UART_SHIFT 2 #define UART_SHIFT 2
#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
.pushsection .data .pushsection .data
davinci_uart_phys: .word 0 davinci_uart_phys: .word 0
davinci_uart_virt: .word 0 davinci_uart_virt: .word 0
.popsection .popsection
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
/* Use davinci_uart_phys/virt if already configured */ /* Use davinci_uart_phys/virt if already configured */
10: mrc p15, 0, \rp, c1, c0 10: adr \rp, 99f @ get effective addr of 99f
tst \rp, #1 @ MMU enabled? ldr \rv, [\rp] @ get absolute addr of 99f
ldreq \rp, =davinci_uart_v2p(davinci_uart_phys) sub \rv, \rv, \rp @ offset between the two
ldrne \rp, =davinci_uart_phys ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
add \rv, \rp, #4 @ davinci_uart_virt sub \tmp, \rp, \rv @ make it effective
ldr \rp, [\rp, #0] ldr \rp, [\tmp, #0] @ davinci_uart_phys
ldr \rv, [\rv, #0] ldr \rv, [\tmp, #4] @ davinci_uart_virt
cmp \rp, #0 @ is port configured? cmp \rp, #0 @ is port configured?
cmpne \rv, #0 cmpne \rv, #0
bne 99f @ already configured bne 100f @ already configured
/* Check the debug UART address set in uncompress.h */ /* Check the debug UART address set in uncompress.h */
mrc p15, 0, \rp, c1, c0 and \rp, pc, #0xff000000
tst \rp, #1 @ MMU enabled? ldr \rv, =DAVINCI_UART_INFO_OFS
add \rp, \rp, \rv
/* Copy uart phys address from decompressor uart info */ /* Copy uart phys address from decompressor uart info */
ldreq \rv, =davinci_uart_v2p(davinci_uart_phys) ldr \rv, [\rp, #0]
ldrne \rv, =davinci_uart_phys str \rv, [\tmp, #0]
ldreq \rp, =DAVINCI_UART_INFO
ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #0]
str \rp, [\rv]
/* Copy uart virt address from decompressor uart info */ /* Copy uart virt address from decompressor uart info */
ldreq \rv, =davinci_uart_v2p(davinci_uart_virt) ldr \rv, [\rp, #4]
ldrne \rv, =davinci_uart_virt str \rv, [\tmp, #4]
ldreq \rp, =DAVINCI_UART_INFO
ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #4]
str \rp, [\rv]
b 10b b 10b
99:
.align
99: .word .
.word davinci_uart_phys
.ltorg
100:
.endm .endm
.macro senduart,rd,rx .macro senduart,rd,rx
......
arch/arm/mach-davinci/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* DaVinci memory space definitions
*
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/**************************************************************************
* Included Files
**************************************************************************/
#include <asm/page.h>
#include <asm/sizes.h>
/**************************************************************************
* Definitions
**************************************************************************/
#define DAVINCI_DDR_BASE 0x80000000
#define DA8XX_DDR_BASE 0xc0000000
#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
#error Cannot enable DaVinci and DA8XX platforms concurrently
#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
#else
#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
#endif
#define DDR2_SDRCR_OFFSET 0xc
#define DDR2_SRPD_BIT BIT(23)
#define DDR2_MCLKSTOPEN_BIT BIT(30)
#define DDR2_LPMODEN_BIT BIT(31)
#endif /* __ASM_ARCH_MEMORY_H */
arch/arm/mach-davinci/include/mach/serial.h
浏览文件 @ cefd3e71
...@@ -21,8 +21,9 @@ ...@@ -21,8 +21,9 @@
* macros in debug-macro.S. * macros in debug-macro.S.
* *
* This area sits just below the page tables (see arch/arm/kernel/head.S). * This area sits just below the page tables (see arch/arm/kernel/head.S).
* We define it as a relative offset from start of usable RAM.
*/ */
#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8) #define DAVINCI_UART_INFO_OFS 0x3ff8
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
......
arch/arm/mach-davinci/include/mach/uncompress.h
浏览文件 @ cefd3e71
...@@ -43,7 +43,12 @@ static inline void flush(void) ...@@ -43,7 +43,12 @@ static inline void flush(void)
static inline void set_uart_info(u32 phys, void * __iomem virt) static inline void set_uart_info(u32 phys, void * __iomem virt)
{ {
u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); /*
* Get address of some.bss variable and round it down
* a la CONFIG_AUTO_ZRELADDR.
*/
u32 ram_start = (u32)&uart & 0xf8000000;
u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
uart = (u32 *)phys; uart = (u32 *)phys;
uart_info[0] = phys; uart_info[0] = phys;
......
arch/arm/mach-davinci/sleep.S
浏览文件 @ cefd3e71
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
#include <linux/linkage.h> #include <linux/linkage.h>
#include <asm/assembler.h> #include <asm/assembler.h>
#include <mach/psc.h> #include <mach/psc.h>
#include <mach/memory.h> #include <mach/ddr2.h>
#include "clock.h" #include "clock.h"
......
arch/arm/mach-dove/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -8,7 +8,7 @@ ...@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h> #include <mach/bridge-regs.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =DOVE_SB_REGS_PHYS_BASE ldr \rp, =DOVE_SB_REGS_PHYS_BASE
ldr \rv, =DOVE_SB_REGS_VIRT_BASE ldr \rv, =DOVE_SB_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000 orr \rp, \rp, #0x00012000
......
arch/arm/mach-dove/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-dove/include/mach/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-ebsa110/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* *
**/ **/
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0xf0000000 mov \rp, #0xf0000000
orr \rp, \rp, #0x00000be0 orr \rp, \rp, #0x00000be0
mov \rp, \rv mov \rp, \rv
......
arch/arm/mach-ep93xx/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
*/ */
#include <mach/ep93xx-regs.h> #include <mach/ep93xx-regs.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base
ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base
orr \rp, \rp, #0x000c0000 orr \rp, \rp, #0x000c0000
......
arch/arm/mach-exynos4/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -20,7 +20,7 @@ ...@@ -20,7 +20,7 @@
* aligned and add in the offset when we load the value here. * aligned and add in the offset when we load the value here.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0 #if CONFIG_DEBUG_S3C_UART != 0
......
arch/arm/mach-footbridge/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -15,7 +15,7 @@ ...@@ -15,7 +15,7 @@
#ifndef CONFIG_DEBUG_DC21285_PORT #ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */ /* For NetWinder debugging */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x000003f8 mov \rp, #0x000003f8
orr \rv, \rp, #0xff000000 @ virtual orr \rv, \rp, #0xff000000 @ virtual
orr \rp, \rp, #0x7c000000 @ physical orr \rp, \rp, #0x7c000000 @ physical
...@@ -31,7 +31,7 @@ ...@@ -31,7 +31,7 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
.if dc21285_low .if dc21285_low
mov \rp, #dc21285_low mov \rp, #dc21285_low
.else .else
......
arch/arm/mach-gemini/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
*/ */
#include <mach/hardware.h> #include <mach/hardware.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =GEMINI_UART_BASE @ physical ldr \rp, =GEMINI_UART_BASE @ physical
ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
.endm .endm
......
arch/arm/mach-gemini/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
#ifdef CONFIG_GEMINI_MEM_SWAP
# define PLAT_PHYS_OFFSET UL(0x00000000)
#else
# define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
#endif /* __MACH_MEMORY_H */
arch/arm/mach-h720x/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -16,7 +16,7 @@ ...@@ -16,7 +16,7 @@
.equ io_virt, IO_VIRT .equ io_virt, IO_VIRT
.equ io_phys, IO_PHYS .equ io_phys, IO_PHYS
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00020000 @ UART1 mov \rp, #0x00020000 @ UART1
add \rv, \rp, #io_virt @ virtual address add \rv, \rp, #io_virt @ virtual address
add \rp, \rp, #io_phys @ physical base address add \rp, \rp, #io_phys @ physical base address
......
arch/arm/mach-h720x/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-h720x/include/mach/memory.h
*
* Copyright (c) 2000 Jungjun Kim
*
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x40000000)
#endif
arch/arm/mach-integrator/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* *
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x16000000 @ physical base address mov \rp, #0x16000000 @ physical base address
mov \rv, #0xf0000000 @ virtual base mov \rv, #0xf0000000 @ virtual base
add \rv, \rv, #0x16000000 >> 4 add \rv, \rv, #0x16000000 >> 4
......
arch/arm/mach-iop13xx/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00002300 mov \rp, #0x00002300
orr \rp, \rp, #0x00000040 orr \rp, \rp, #0x00000040
orr \rv, \rp, #0xfe000000 @ virtual orr \rv, \rp, #0xfe000000 @ virtual
......
arch/arm/mach-iop32x/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0xfe000000 @ physical as well as virtual mov \rp, #0xfe000000 @ physical as well as virtual
orr \rp, \rp, #0x00800000 @ location of the UART orr \rp, \rp, #0x00800000 @ location of the UART
mov \rv, \rp mov \rv, \rp
......
arch/arm/mach-iop32x/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-iop32x/include/mach/memory.h
*/
#ifndef __MEMORY_H
#define __MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0xa0000000)
#endif
arch/arm/mach-iop33x/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00ff0000 mov \rp, #0x00ff0000
orr \rp, \rp, #0x0000f700 orr \rp, \rp, #0x0000f700
orr \rv, #0xfe000000 @ virtual orr \rv, #0xfe000000 @ virtual
......
arch/arm/mach-iop33x/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-iop33x/include/mach/memory.h
*/
#ifndef __MEMORY_H
#define __MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-ixp2000/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* *
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00030000 mov \rp, #0x00030000
#ifdef __ARMEB__ #ifdef __ARMEB__
orr \rp, \rp, #0x00000003 orr \rp, \rp, #0x00000003
......
arch/arm/mach-ixp23xx/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -12,7 +12,7 @@ ...@@ -12,7 +12,7 @@
*/ */
#include <mach/ixp23xx.h> #include <mach/ixp23xx.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical
ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual
#ifdef __ARMEB__ #ifdef __ARMEB__
......
arch/arm/mach-ixp4xx/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
#ifdef __ARMEB__ #ifdef __ARMEB__
mov \rp, #3 @ Uart regs are at off set of 3 if mov \rp, #3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian. @ byte writes used - Big Endian.
......
arch/arm/mach-ixp4xx/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-ixp4xx/include/mach/memory.h
*
* Copyright (c) 2001-2004 MontaVista Software, Inc.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#include <asm/sizes.h>
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-kirkwood/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -8,7 +8,7 @@ ...@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h> #include <mach/bridge-regs.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =KIRKWOOD_REGS_PHYS_BASE ldr \rp, =KIRKWOOD_REGS_PHYS_BASE
ldr \rv, =KIRKWOOD_REGS_VIRT_BASE ldr \rv, =KIRKWOOD_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000 orr \rp, \rp, #0x00012000
......
arch/arm/mach-kirkwood/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-kirkwood/include/mach/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-ks8695/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/regs-uart.h> #include <mach/regs-uart.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =KS8695_UART_PA @ physical base address ldr \rp, =KS8695_UART_PA @ physical base address
ldr \rv, =KS8695_UART_VA @ virtual base address ldr \rv, =KS8695_UART_VA @ virtual base address
.endm .endm
......
arch/arm/mach-l7200/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
.equ io_virt, IO_BASE .equ io_virt, IO_BASE
.equ io_phys, IO_START .equ io_phys, IO_START
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00044000 @ UART1 mov \rp, #0x00044000 @ UART1
@ mov \rp, #0x00045000 @ UART2 @ mov \rp, #0x00045000 @ UART2
add \rv, \rp, #io_virt @ virtual address add \rv, \rp, #io_virt @ virtual address
......
arch/arm/mach-lpc32xx/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -20,7 +20,7 @@ ...@@ -20,7 +20,7 @@
* Debug output is hardcoded to standard UART 5 * Debug output is hardcoded to standard UART 5
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldreq \rp, =0x40090000 ldreq \rp, =0x40090000
ldrne \rv, =0xF4090000 ldrne \rv, =0xF4090000
.endm .endm
......
arch/arm/mach-lpc32xx/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-lpc32xx/include/mach/memory.h
*
* Author: Kevin Wells <kevin.wells@nxp.com>
*
* Copyright (C) 2010 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset of bank 0
*/
#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
arch/arm/mach-mmp/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
#include <mach/addr-map.h> #include <mach/addr-map.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =APB_PHYS_BASE @ physical ldr \rp, =APB_PHYS_BASE @ physical
ldr \rv, =APB_VIRT_BASE @ virtual ldr \rv, =APB_VIRT_BASE @ virtual
orr \rp, \rp, #0x00017000 orr \rp, \rp, #0x00017000
......
arch/arm/mach-mmp/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* linux/arch/arm/mach-mmp/include/mach/memory.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_MACH_MEMORY_H
#define __ASM_MACH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif /* __ASM_MACH_MEMORY_H */
arch/arm/mach-msm/board-msm7x30.c
浏览文件 @ cefd3e71
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#include <linux/smsc911x.h> #include <linux/smsc911x.h>
#include <linux/usb/msm_hsusb.h> #include <linux/usb/msm_hsusb.h>
#include <linux/clkdev.h> #include <linux/clkdev.h>
#include <linux/memblock.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
...@@ -42,6 +43,21 @@ ...@@ -42,6 +43,21 @@
extern struct sys_timer msm_timer; extern struct sys_timer msm_timer;
static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
tag->u.mem.start = 0;
tag->u.mem.size += SZ_2M;
}
}
static void __init msm7x30_reserve(void)
{
memblock_remove(0x0, SZ_2M);
}
static int hsusb_phy_init_seq[] = { static int hsusb_phy_init_seq[] = {
0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
0x02, 0x36, /* Disable CDR Auto Reset feature */ 0x02, 0x36, /* Disable CDR Auto Reset feature */
...@@ -107,6 +123,8 @@ static void __init msm7x30_map_io(void) ...@@ -107,6 +123,8 @@ static void __init msm7x30_map_io(void)
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
.atag_offset = 0x100, .atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io, .map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq, .init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init, .init_machine = msm7x30_init,
...@@ -115,6 +133,8 @@ MACHINE_END ...@@ -115,6 +133,8 @@ MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
.atag_offset = 0x100, .atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io, .map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq, .init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init, .init_machine = msm7x30_init,
...@@ -123,6 +143,8 @@ MACHINE_END ...@@ -123,6 +143,8 @@ MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
.atag_offset = 0x100, .atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io, .map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq, .init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init, .init_machine = msm7x30_init,
......
arch/arm/mach-msm/board-msm8960.c
浏览文件 @ cefd3e71
...@@ -20,16 +20,34 @@ ...@@ -20,16 +20,34 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/clkdev.h> #include <linux/clkdev.h>
#include <linux/memblock.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/hardware/gic.h> #include <asm/hardware/gic.h>
#include <asm/setup.h>
#include <mach/board.h> #include <mach/board.h>
#include <mach/msm_iomap.h> #include <mach/msm_iomap.h>
#include "devices.h" #include "devices.h"
static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&
tag->u.mem.start == 0x40200000) {
tag->u.mem.start = 0x40000000;
tag->u.mem.size += SZ_2M;
}
}
static void __init msm8960_reserve(void)
{
memblock_remove(0x40000000, SZ_2M);
}
static void __init msm8960_map_io(void) static void __init msm8960_map_io(void)
{ {
msm_map_msm8960_io(); msm_map_msm8960_io();
...@@ -76,6 +94,8 @@ static void __init msm8960_rumi3_init(void) ...@@ -76,6 +94,8 @@ static void __init msm8960_rumi3_init(void)
} }
MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
.fixup = msm8960_fixup,
.reserve = msm8960_reserve,
.map_io = msm8960_map_io, .map_io = msm8960_map_io,
.init_irq = msm8960_init_irq, .init_irq = msm8960_init_irq,
.timer = &msm_timer, .timer = &msm_timer,
...@@ -83,6 +103,8 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") ...@@ -83,6 +103,8 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
MACHINE_END MACHINE_END
MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
.fixup = msm8960_fixup,
.reserve = msm8960_reserve,
.map_io = msm8960_map_io, .map_io = msm8960_map_io,
.init_irq = msm8960_init_irq, .init_irq = msm8960_init_irq,
.timer = &msm_timer, .timer = &msm_timer,
......
arch/arm/mach-msm/board-msm8x60.c
浏览文件 @ cefd3e71
...@@ -20,14 +20,31 @@ ...@@ -20,14 +20,31 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/memblock.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/hardware/gic.h> #include <asm/hardware/gic.h>
#include <asm/setup.h>
#include <mach/board.h> #include <mach/board.h>
#include <mach/msm_iomap.h> #include <mach/msm_iomap.h>
static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&
tag->u.mem.start == 0x40200000) {
tag->u.mem.start = 0x40000000;
tag->u.mem.size += SZ_2M;
}
}
static void __init msm8x60_reserve(void)
{
memblock_remove(0x40000000, SZ_2M);
}
static void __init msm8x60_map_io(void) static void __init msm8x60_map_io(void)
{ {
...@@ -65,6 +82,8 @@ static void __init msm8x60_init(void) ...@@ -65,6 +82,8 @@ static void __init msm8x60_init(void)
} }
MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io, .map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq, .init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init, .init_machine = msm8x60_init,
...@@ -72,6 +91,8 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") ...@@ -72,6 +91,8 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
MACHINE_END MACHINE_END
MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io, .map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq, .init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init, .init_machine = msm8x60_init,
...@@ -79,6 +100,8 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") ...@@ -79,6 +100,8 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
MACHINE_END MACHINE_END
MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io, .map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq, .init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init, .init_machine = msm8x60_init,
...@@ -86,6 +109,8 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") ...@@ -86,6 +109,8 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
MACHINE_END MACHINE_END
MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io, .map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq, .init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init, .init_machine = msm8x60_init,
......
arch/arm/mach-msm/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -20,7 +20,7 @@ ...@@ -20,7 +20,7 @@
#include <mach/msm_iomap.h> #include <mach/msm_iomap.h>
#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE) #if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =MSM_DEBUG_UART_PHYS ldr \rp, =MSM_DEBUG_UART_PHYS
ldr \rv, =MSM_DEBUG_UART_BASE ldr \rv, =MSM_DEBUG_UART_BASE
.endm .endm
...@@ -37,7 +37,7 @@ ...@@ -37,7 +37,7 @@
beq 1001b beq 1001b
.endm .endm
#else #else
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rv, #0xff000000 mov \rv, #0xff000000
orr \rv, \rv, #0x00f00000 orr \rv, \rv, #0x00f00000
.endm .endm
......
arch/arm/mach-msm/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/* arch/arm/mach-msm/include/mach/memory.h
*
* Copyright (C) 2007 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/* physical offset of RAM */
#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_ARCH_QSD8X50)
#define PLAT_PHYS_OFFSET UL(0x20000000)
#elif defined(CONFIG_ARCH_MSM7X30)
#define PLAT_PHYS_OFFSET UL(0x00200000)
#elif defined(CONFIG_ARCH_MSM8X60)
#define PLAT_PHYS_OFFSET UL(0x40200000)
#elif defined(CONFIG_ARCH_MSM8960)
#define PLAT_PHYS_OFFSET UL(0x40200000)
#else
#define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
#endif
arch/arm/mach-mv78xx0/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -8,7 +8,7 @@ ...@@ -8,7 +8,7 @@
#include <mach/mv78xx0.h> #include <mach/mv78xx0.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =MV78XX0_REGS_PHYS_BASE ldr \rp, =MV78XX0_REGS_PHYS_BASE
ldr \rv, =MV78XX0_REGS_VIRT_BASE ldr \rv, =MV78XX0_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000 orr \rp, \rp, #0x00012000
......
arch/arm/mach-mv78xx0/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-mv78xx0/include/mach/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-mxs/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -30,7 +30,7 @@ ...@@ -30,7 +30,7 @@
#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) #define UART_VADDR MXS_IO_ADDRESS(UART_PADDR)
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual ldr \rv, =UART_VADDR @ virtual
.endm .endm
......
arch/arm/mach-mxs/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef __MACH_MXS_MEMORY_H__
#define __MACH_MXS_MEMORY_H__
#define PHYS_OFFSET UL(0x40000000)
#endif /* __MACH_MXS_MEMORY_H__ */
arch/arm/mach-netx/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
#include "hardware.h" #include "hardware.h"
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00000a00 mov \rp, #0x00000a00
orr \rv, \rp, #io_p2v(0x00100000) @ virtual orr \rv, \rp, #io_p2v(0x00100000) @ virtual
orr \rp, \rp, #0x00100000 @ physical orr \rp, \rp, #0x00100000 @ physical
......
arch/arm/mach-netx/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-netx/include/mach/memory.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
arch/arm/mach-nomadik/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
* *
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00100000 mov \rp, #0x00100000
add \rp, \rp, #0x000fb000 add \rp, \rp, #0x000fb000
add \rv, \rp, #0xf0000000 @ virtual base add \rv, \rp, #0xf0000000 @ virtual base
......
arch/arm/mach-nomadik/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* mach-nomadik/include/mach/memory.h
*
* Copyright (C) 1999 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-nuc93x/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-nuc93x/include/mach/memory.h
*
* Copyright (c) 2008 Nuvoton technology corporation
* All rights reserved.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-omap1/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -13,13 +13,8 @@ ...@@ -13,13 +13,8 @@
#include <linux/serial_reg.h> #include <linux/serial_reg.h>
#include <asm/memory.h>
#include <plat/serial.h> #include <plat/serial.h>
#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
.pushsection .data .pushsection .data
omap_uart_phys: .word 0x0 omap_uart_phys: .word 0x0
omap_uart_virt: .word 0x0 omap_uart_virt: .word 0x0
...@@ -31,26 +26,24 @@ omap_uart_virt: .word 0x0 ...@@ -31,26 +26,24 @@ omap_uart_virt: .word 0x0
* the desired UART phys and virt addresses temporarily into * the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above. * the omap_uart_phys and omap_uart_virt above.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */ /* Use omap_uart_phys/virt if already configured */
9: mrc p15, 0, \rp, c1, c0 9: adr \rp, 99f @ get effective addr of 99f
tst \rp, #1 @ MMU enabled? ldr \rv, [\rp] @ get absolute addr of 99f
ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled sub \rv, \rv, \rp @ offset between the two
ldrne \rp, =omap_uart_phys @ MMU enabled ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
add \rv, \rp, #4 @ omap_uart_virt sub \tmp, \rp, \rv @ make it effective
ldr \rp, [\rp, #0] ldr \rp, [\tmp, #0] @ omap_uart_phys
ldr \rv, [\rv, #0] ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured? cmp \rp, #0 @ is port configured?
cmpne \rv, #0 cmpne \rv, #0
bne 99f @ already configured bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */ /* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rp, c1, c0 and \rp, pc, #0xff000000
tst \rp, #1 @ MMU enabled? ldr \rv, =OMAP_UART_INFO_OFS
ldreq \rp, =OMAP_UART_INFO @ MMU not enabled ldr \rp, [\rp, \rv]
ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */ /* Select the UART to use based on the UART1 scratchpad value */
10: cmp \rp, #0 @ no port configured? 10: cmp \rp, #0 @ no port configured?
...@@ -74,17 +67,18 @@ omap_uart_virt: .word 0x0 ...@@ -74,17 +67,18 @@ omap_uart_virt: .word 0x0
/* Store both phys and virt address for the uart */ /* Store both phys and virt address for the uart */
98: add \rp, \rp, #0xff000000 @ phys base 98: add \rp, \rp, #0xff000000 @ phys base
mrc p15, 0, \rv, c1, c0 str \rp, [\tmp, #0] @ omap_uart_phys
tst \rv, #1 @ MMU enabled?
ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
sub \rp, \rp, #0xff000000 @ phys base sub \rp, \rp, #0xff000000 @ phys base
add \rp, \rp, #0xfe000000 @ virt base add \rp, \rp, #0xfe000000 @ virt base
add \rv, \rv, #4 @ omap_uart_lsr str \rp, [\tmp, #4] @ omap_uart_virt
str \rp, [\rv, #0]
b 9b b 9b
99:
.align
99: .word .
.word omap_uart_phys
.ltorg
100:
.endm .endm
.macro senduart,rd,rx .macro senduart,rd,rx
......
arch/arm/mach-omap1/include/mach/memory.h
浏览文件 @ cefd3e71
...@@ -2,4 +2,55 @@ ...@@ -2,4 +2,55 @@
* arch/arm/mach-omap1/include/mach/memory.h * arch/arm/mach-omap1/include/mach/memory.h
*/ */
#include <plat/memory.h> #ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x10000000)
/*
* Bus address is physical address, except for OMAP-1510 Local Bus.
* OMAP-1510 bus address is translated into a Local Bus address if the
* OMAP bus type is lbus. We do the address translation based on the
* device overriding the defaults used in the dma-mapping API.
* Note that the is_lbus_device() test is not very efficient on 1510
* because of the strncmp().
*/
#ifdef CONFIG_ARCH_OMAP15XX
/*
* OMAP-1510 Local Bus address offset
*/
#define OMAP1510_LB_OFFSET UL(0x30000000)
#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
#define __arch_pfn_to_dma(dev, pfn) \
({ dma_addr_t __dma = __pfn_to_phys(pfn); \
if (is_lbus_device(dev)) \
__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
__dma; })
#define __arch_dma_to_pfn(dev, addr) \
({ dma_addr_t __dma = addr; \
if (is_lbus_device(dev)) \
__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
__phys_to_pfn(__dma); \
})
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
__phys_to_virt(addr)); })
#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
(dma_addr_t) (is_lbus_device(dev) ? \
virt_to_lbus(__addr) : \
__virt_to_phys(__addr)); })
#endif /* CONFIG_ARCH_OMAP15XX */
#endif
arch/arm/mach-omap2/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -13,15 +13,10 @@ ...@@ -13,15 +13,10 @@
#include <linux/serial_reg.h> #include <linux/serial_reg.h>
#include <asm/memory.h>
#include <plat/serial.h> #include <plat/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff) #define UART_OFFSET(addr) ((addr) & 0x00ffffff)
#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
.pushsection .data .pushsection .data
omap_uart_phys: .word 0 omap_uart_phys: .word 0
omap_uart_virt: .word 0 omap_uart_virt: .word 0
...@@ -34,26 +29,25 @@ omap_uart_lsr: .word 0 ...@@ -34,26 +29,25 @@ omap_uart_lsr: .word 0
* the desired UART phys and virt addresses temporarily into * the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above. * the omap_uart_phys and omap_uart_virt above.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */ /* Use omap_uart_phys/virt if already configured */
10: mrc p15, 0, \rp, c1, c0 10: adr \rp, 99f @ get effective addr of 99f
tst \rp, #1 @ MMU enabled? ldr \rv, [\rp] @ get absolute addr of 99f
ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled sub \rv, \rv, \rp @ offset between the two
ldrne \rp, =omap_uart_phys @ MMU enabled ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
add \rv, \rp, #4 @ omap_uart_virt sub \tmp, \rp, \rv @ make it effective
ldr \rp, [\rp, #0] ldr \rp, [\tmp, #0] @ omap_uart_phys
ldr \rv, [\rv, #0] ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured? cmp \rp, #0 @ is port configured?
cmpne \rv, #0 cmpne \rv, #0
bne 99f @ already configured bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */ /* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rp, c1, c0 mov \rp, pc
tst \rp, #1 @ MMU enabled? ldr \rv, =OMAP_UART_INFO_OFS
ldreq \rp, =OMAP_UART_INFO @ MMU not enabled and \rp, \rp, #0xff000000
ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled ldr \rp, [\rp, \rv]
ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */ /* Select the UART to use based on the UART1 scratchpad value */
cmp \rp, #0 @ no port configured? cmp \rp, #0 @ no port configured?
...@@ -106,50 +100,47 @@ omap_uart_lsr: .word 0 ...@@ -106,50 +100,47 @@ omap_uart_lsr: .word 0
b 98f b 98f
83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) 83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE)
b 98f b 98f
95: ldr \rp, =ZOOM_UART_BASE 95: ldr \rp, =ZOOM_UART_BASE
mrc p15, 0, \rv, c1, c0 str \rp, [\tmp, #0] @ omap_uart_phys
tst \rv, #1 @ MMU enabled?
ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
ldr \rp, =ZOOM_UART_VIRT ldr \rp, =ZOOM_UART_VIRT
add \rv, \rv, #4 @ omap_uart_virt str \rp, [\tmp, #4] @ omap_uart_virt
str \rp, [\rv, #0]
mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
add \rv, \rv, #4 @ omap_uart_lsr str \rp, [\tmp, #8] @ omap_uart_lsr
str \rp, [\rv, #0]
b 10b b 10b
/* Store both phys and virt address for the uart */ /* Store both phys and virt address for the uart */
98: add \rp, \rp, #0x48000000 @ phys base 98: add \rp, \rp, #0x48000000 @ phys base
mrc p15, 0, \rv, c1, c0 str \rp, [\tmp, #0] @ omap_uart_phys
tst \rv, #1 @ MMU enabled?
ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
sub \rp, \rp, #0x48000000 @ phys base sub \rp, \rp, #0x48000000 @ phys base
add \rp, \rp, #0xfa000000 @ virt base add \rp, \rp, #0xfa000000 @ virt base
add \rv, \rv, #4 @ omap_uart_virt str \rp, [\tmp, #4] @ omap_uart_virt
str \rp, [\rv, #0]
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
add \rv, \rv, #4 @ omap_uart_lsr str \rp, [\tmp, #8] @ omap_uart_lsr
str \rp, [\rv, #0]
b 10b b 10b
99:
.align
99: .word .
.word omap_uart_phys
.ltorg
100: /* Pass the UART_LSR reg address */
ldr \tmp, [\tmp, #8] @ omap_uart_lsr
add \rp, \rp, \tmp
add \rv, \rv, \tmp
.endm .endm
.macro senduart,rd,rx .macro senduart,rd,rx
strb \rd, [\rx] orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset
bic \rx, \rx, #0xff @ get base (THR) reg address
strb \rd, [\rx] @ send lower byte of rd
orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR)
bic \rd, \rd, #(0xff << 24) @ restore original rd
.endm .endm
.macro busyuart,rd,rx .macro busyuart,rd,rx
1001: mrc p15, 0, \rd, c1, c0 1001: ldrb \rd, [\rx] @ rx contains UART_LSR address
tst \rd, #1 @ MMU enabled?
ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled
ldrne \rd, =omap_uart_lsr @ MMU enabled
ldr \rd, [\rd, #0]
ldrb \rd, [\rx, \rd]
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b bne 1001b
......
arch/arm/mach-omap2/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-omap2/include/mach/memory.h
*/
#include <plat/memory.h>
arch/arm/mach-orion5x/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
#include <mach/orion5x.h> #include <mach/orion5x.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =ORION5X_REGS_PHYS_BASE ldr \rp, =ORION5X_REGS_PHYS_BASE
ldr \rv, =ORION5X_REGS_VIRT_BASE ldr \rv, =ORION5X_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000 orr \rp, \rp, #0x00012000
......
arch/arm/mach-orion5x/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-orion5x/include/mach/memory.h
*
* Marvell Orion memory definitions
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-pnx4008/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* *
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00090000 mov \rp, #0x00090000
add \rv, \rp, #0xf4000000 @ virtual add \rv, \rp, #0xf4000000 @ virtual
add \rp, \rp, #0x40000000 @ physical add \rp, \rp, #0x40000000 @ physical
......
arch/arm/mach-pnx4008/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-pnx4008/include/mach/memory.h
*
* Copyright (c) 2005 Philips Semiconductors
* Copyright (c) 2005 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
arch/arm/mach-prima2/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/uart.h> #include <mach/uart.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical
ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual
.endm .endm
......
arch/arm/mach-prima2/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-prima2/include/mach/memory.h
*
* Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
/*
* Restrict DMA-able region to workaround silicon limitation.
* The limitation restricts buffers available for DMA to SD/MMC
* hardware to be below 256MB
*/
#define ARM_DMA_ZONE_SIZE (SZ_256M)
#endif
arch/arm/mach-prima2/l2x0.c
浏览文件 @ cefd3e71
...@@ -13,7 +13,6 @@ ...@@ -13,7 +13,6 @@
#include <linux/of.h> #include <linux/of.h>
#include <linux/of_address.h> #include <linux/of_address.h>
#include <asm/hardware/cache-l2x0.h> #include <asm/hardware/cache-l2x0.h>
#include <mach/memory.h>
#define L2X0_ADDR_FILTERING_START 0xC00 #define L2X0_ADDR_FILTERING_START 0xC00
#define L2X0_ADDR_FILTERING_END 0xC04 #define L2X0_ADDR_FILTERING_END 0xC04
...@@ -41,9 +40,9 @@ static int __init sirfsoc_of_l2x_init(void) ...@@ -41,9 +40,9 @@ static int __init sirfsoc_of_l2x_init(void)
/* /*
* set the physical memory windows L2 cache will cover * set the physical memory windows L2 cache will cover
*/ */
writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024, writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024,
sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END); sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
writel_relaxed(PLAT_PHYS_OFFSET | 0x1, writel_relaxed(PHYS_OFFSET | 0x1,
sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START); sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
writel_relaxed(0, writel_relaxed(0,
......
arch/arm/mach-prima2/prima2.c
浏览文件 @ cefd3e71
...@@ -36,6 +36,7 @@ MACHINE_START(PRIMA2_EVB, "prima2cb") ...@@ -36,6 +36,7 @@ MACHINE_START(PRIMA2_EVB, "prima2cb")
.map_io = sirfsoc_map_lluart, .map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init, .init_irq = sirfsoc_of_irq_init,
.timer = &sirfsoc_timer, .timer = &sirfsoc_timer,
.dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init, .init_machine = sirfsoc_mach_init,
.dt_compat = prima2cb_dt_match, .dt_compat = prima2cb_dt_match,
MACHINE_END MACHINE_END
arch/arm/mach-pxa/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
#include "hardware.h" #include "hardware.h"
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00100000 mov \rp, #0x00100000
orr \rv, \rp, #io_p2v(0x40000000) @ virtual orr \rv, \rp, #io_p2v(0x40000000) @ virtual
orr \rp, \rp, #0x40000000 @ physical orr \rp, \rp, #0x40000000 @ physical
......
arch/arm/mach-pxa/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-pxa/include/mach/memory.h
*
* Author: Nicolas Pitre
* Copyright: (C) 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0xa0000000)
#endif
arch/arm/mach-pxa/z2.c
浏览文件 @ cefd3e71
...@@ -686,7 +686,7 @@ static void z2_power_off(void) ...@@ -686,7 +686,7 @@ static void z2_power_off(void)
*/ */
PSPR = 0x0; PSPR = 0x0;
local_irq_disable(); local_irq_disable();
pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET);
} }
#else #else
#define z2_power_off NULL #define z2_power_off NULL
......
arch/arm/mach-realview/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -33,7 +33,7 @@ ...@@ -33,7 +33,7 @@
#error "Unknown RealView platform" #error "Unknown RealView platform"
#endif #endif
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #DEBUG_LL_UART_OFFSET mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xfb000000 @ virtual base orr \rv, \rp, #0xfb000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base orr \rp, \rp, #0x10000000 @ physical base
......
arch/arm/mach-rpc/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* *
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x00010000 mov \rp, #0x00010000
orr \rp, \rp, #0x00000fe0 orr \rp, \rp, #0x00000fe0
orr \rv, \rp, #0xe0000000 @ virtual orr \rv, \rp, #0xe0000000 @ virtual
......
arch/arm/mach-s3c2400/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/* arch/arm/mach-s3c2400/include/mach/memory.h
* from arch/arm/mach-rpc/include/mach/memory.h
*
* Copyright 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Copyright (C) 1996,1997,1998 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x0C000000)
#endif
arch/arm/mach-s3c2410/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -19,7 +19,7 @@ ...@@ -19,7 +19,7 @@
#define S3C2410_UART1_OFF (0x4000) #define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9) #define SHIFT_2440TXF (14-9)
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, = S3C24XX_PA_UART ldr \rp, = S3C24XX_PA_UART
ldr \rv, = S3C24XX_VA_UART ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0 #if CONFIG_DEBUG_S3C_UART != 0
......
arch/arm/mach-s3c2410/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/* arch/arm/mach-s3c2410/include/mach/memory.h
* from arch/arm/mach-rpc/include/mach/memory.h
*
* Copyright (C) 1996,1997,1998 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x30000000)
#endif
arch/arm/mach-s3c64xx/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here. * aligned and add in the offset when we load the value here.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART ldr \rp, = S3C_PA_UART
ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
#if CONFIG_DEBUG_S3C_UART != 0 #if CONFIG_DEBUG_S3C_UART != 0
......
arch/arm/mach-s3c64xx/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/* arch/arm/mach-s3c6400/include/mach/memory.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x50000000)
#endif
arch/arm/mach-s5p64x0/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -15,7 +15,7 @@ ...@@ -15,7 +15,7 @@
#include <plat/regs-serial.h> #include <plat/regs-serial.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0xE0000000 mov \rp, #0xE0000000
orr \rp, \rp, #0x00100000 orr \rp, \rp, #0x00100000
ldr \rp, [\rp, #0x118 ] ldr \rp, [\rp, #0x118 ]
......
arch/arm/mach-s5p64x0/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5P64X0 - Memory definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H __FILE__
#define PLAT_PHYS_OFFSET UL(0x20000000)
#endif /* __ASM_ARCH_MEMORY_H */
arch/arm/mach-s5pc100/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
* aligned and add in the offset when we load the value here. * aligned and add in the offset when we load the value here.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0 #if CONFIG_DEBUG_S3C_UART != 0
......
arch/arm/mach-s5pc100/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/* arch/arm/mach-s5pc100/include/mach/memory.h
*
* Copyright 2008 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* Based on mach-s3c6400/include/mach/memory.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x20000000)
#endif
arch/arm/mach-s5pv210/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here. * aligned and add in the offset when we load the value here.
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0 #if CONFIG_DEBUG_S3C_UART != 0
......
arch/arm/mach-sa1100/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -12,7 +12,7 @@ ...@@ -12,7 +12,7 @@
*/ */
#include <mach/hardware.h> #include <mach/hardware.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mrc p15, 0, \rp, c1, c0 mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled? tst \rp, #1 @ MMU enabled?
moveq \rp, #0x80000000 @ physical base address moveq \rp, #0x80000000 @ physical base address
......
arch/arm/mach-shark/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* *
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0xe0000000 mov \rp, #0xe0000000
orr \rp, \rp, #0x000003f8 orr \rp, \rp, #0x000003f8
mov \rv, \rp mov \rv, \rp
......
arch/arm/mach-spear3xx/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-spear3xx/include/mach/memory.h
*
* Memory map for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
#include <plat/memory.h>
#endif /* __MACH_MEMORY_H */
arch/arm/mach-spear6xx/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-spear6xx/include/mach/memory.h
*
* Memory map for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
#include <plat/memory.h>
#endif /* __MACH_MEMORY_H */
arch/arm/mach-tegra/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
#include <mach/io.h> #include <mach/io.h>
#include <mach/iomap.h> #include <mach/iomap.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =IO_APB_PHYS @ physical ldr \rp, =IO_APB_PHYS @ physical
ldr \rv, =IO_APB_VIRT @ virtual ldr \rv, =IO_APB_VIRT @ virtual
orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF) orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
......
arch/arm/mach-tegra/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-tegra/include/mach/memory.h
*
* Copyright (C) 2010 Google, Inc.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __MACH_TEGRA_MEMORY_H
#define __MACH_TEGRA_MEMORY_H
/* physical offset of RAM */
#define PLAT_PHYS_OFFSET UL(0)
#endif
arch/arm/mach-u300/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
*/ */
#include <mach/hardware.h> #include <mach/hardware.h>
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
/* If we move the address using MMU, use this. */ /* If we move the address using MMU, use this. */
ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
......
arch/arm/mach-ux500/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -35,7 +35,7 @@ ...@@ -35,7 +35,7 @@
#define UX500_UART(n) __UX500_UART(n) #define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
ldr \rp, =UART_BASE @ no, physical address ldr \rp, =UART_BASE @ no, physical address
ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address
.endm .endm
......
arch/arm/mach-ux500/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* Copyright (C) 2009 ST-Ericsson
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
#define BUS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-versatile/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
* *
*/ */
.macro addruart, rp, rv .macro addruart, rp, rv, tmp
mov \rp, #0x001F0000 mov \rp, #0x001F0000
orr \rp, \rp, #0x00001000 orr \rp, \rp, #0x00001000
orr \rv, \rp, #0xf1000000 @ virtual base orr \rv, \rp, #0xf1000000 @ virtual base
......
arch/arm/mach-versatile/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
/*
* arch/arm/mach-versatile/include/mach/memory.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-vexpress/include/mach/debug-macro.S
浏览文件 @ cefd3e71
...@@ -12,7 +12,7 @@ ...@@ -12,7 +12,7 @@
#define DEBUG_LL_UART_OFFSET 0x00009000 #define DEBUG_LL_UART_OFFSET 0x00009000
.macro addruart,rp,rv .macro addruart,rp,rv,tmp
mov \rp, #DEBUG_LL_UART_OFFSET mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xf8000000 @ virtual base orr \rv, \rp, #0xf8000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base orr \rp, \rp, #0x10000000 @ physical base
......
arch/arm/mach-vexpress/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
此差异已折叠。
arch/arm/mach-vt8500/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
此差异已折叠。
arch/arm/mach-w90x900/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
此差异已折叠。
arch/arm/mach-zynq/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
此差异已折叠。
arch/arm/plat-mxc/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
此差异已折叠。
arch/arm/plat-omap/Kconfig
浏览文件 @ cefd3e71
此差异已折叠。
arch/arm/plat-omap/include/plat/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
此差异已折叠。
arch/arm/plat-spear/include/plat/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
此差异已折叠。
arch/arm/plat-tcc/include/mach/memory.h 已删除 100644 → 0
浏览文件 @ a26bce12
此差异已折叠。
drivers/usb/musb/musb_debugfs.c
浏览文件 @ cefd3e71
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或