提交 ce61c574 编写于 作者: S Suganath prabu Subramani 提交者: Martin K. Petersen

mpt3sas: Used IEEE SGL instead of MPI SGL while framing a SMP Passthrough request message.

As driver was using MPI SGL while framing the SMP Passthrough request
message due to which firmware unable to post the Reply Data in the host
memory and timeout is observed for this SMP Passthrough request message
and so unable to perform phy disable operation.
Signed-off-by: NSuganath prabu Subramani <suganath-prabu.subramani@avagotech.com>
Signed-off-by: NChaitra P B <chaitra.basappa@avagotech.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
上级 b130b0d5
......@@ -1418,7 +1418,6 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
u32 ioc_state;
unsigned long timeleft;
void *psge;
u32 sgl_flags;
u8 issue_reset = 0;
void *data_out = NULL;
dma_addr_t data_out_dma;
......@@ -1507,24 +1506,10 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
cpu_to_le16(sizeof(struct phy_error_log_request));
psge = &mpi_request->SGL;
/* WRITE sgel first */
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
ioc->base_add_sg_single(psge, sgl_flags |
sizeof(struct phy_control_request), data_out_dma);
/* incr sgel */
psge += ioc->sge_size;
/* READ sgel last */
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
ioc->base_add_sg_single(psge, sgl_flags |
sizeof(struct phy_control_reply), data_out_dma +
sizeof(struct phy_control_request));
ioc->build_sg(ioc, psge, data_out_dma,
sizeof(struct phy_control_request),
data_out_dma + sizeof(struct phy_control_request),
sizeof(struct phy_control_reply));
dtransportprintk(ioc, pr_info(MPT3SAS_FMT
"phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册