Merge tag 'v4.13-rc7' into for-4.14/block-postmerge

Linux 4.13-rc7
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Documentation/admin-guide/pm/cpufreq.rst

@@ -237,6 +237,14 @@ are the following:
 	This attribute is not present if the scaling driver in use does not
 	support it.
 
+``cpuinfo_cur_freq``
+	Current frequency of the CPUs belonging to this policy as obtained from
+	the hardware (in KHz).
+
+	This is expected to be the frequency the hardware actually runs at.
+	If that frequency cannot be determined, this attribute should not
+	be present.
+
 ``cpuinfo_max_freq``
 	Maximum possible operating frequency the CPUs belonging to this policy
 	can run at (in kHz).

Documentation/devicetree/bindings/ata/sata_rcar.txt

 * Renesas R-Car SATA
 
 Required properties:
-- compatible		: should contain one of the following:
+- compatible		: should contain one or more of the following:
 			  - "renesas,sata-r8a7779" for R-Car H1
-			    ("renesas,rcar-sata" is deprecated)
 			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
 			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
 			  - "renesas,sata-r8a7791" for R-Car M2-W
 			  - "renesas,sata-r8a7793" for R-Car M2-N
 			  - "renesas,sata-r8a7795" for R-Car H3
+			  - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
+			  - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
+			  - "renesas,rcar-sata" is deprecated
+
+			  When compatible with the generic version nodes
+			  must list the SoC-specific version corresponding
+			  to the platform first followed by the generic
+			  version.
+
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
 - clocks		: must contain a reference to the functional clock.
@@ -16,7 +24,7 @@ Required properties:
 Example:
 
 sata0: sata@ee300000 {
-	compatible = "renesas,sata-r8a7791";
+	compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
 	reg = <0 0xee300000 0 0x2000>;
 	interrupt-parent = <&gic>;
 	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/gpio/gpio-exar.txt

+Exportable MPIO interface of Exar UART chips
+
+Required properties of the device:
+ - exar,first-pin: first exportable pins (0..15)
+ - ngpios: number of exportable pins (1..16)

Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt

@@ -40,7 +40,7 @@ Optional properties:
 Example for a Mali-T760:
 
 gpu@ffa30000 {
-	compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";
+	compatible = "rockchip,rk3288-mali", "arm,mali-t760";
 	reg = <0xffa30000 0x10000>;
 	interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,

Documentation/fb/efifb.txt

@@ -27,5 +27,11 @@ You have to add the following kernel parameters in your elilo.conf:
 	Macbook Pro 17", iMac 20" :
 		video=efifb:i20
 
+Accepted options:
+
+nowc	Don't map the framebuffer write combined. This can be used
+	to workaround side-effects and slowdowns on other CPU cores
+	when large amounts of console data are written.
+
 --
 Edgar Hucek <gimli@dark-green.com>

Documentation/gpio/gpio-legacy.txt

@@ -459,7 +459,7 @@ pin controller?
 
 This is done by registering "ranges" of pins, which are essentially
 cross-reference tables. These are described in
-Documentation/pinctrl.txt
+Documentation/driver-api/pinctl.rst
 
 While the pin allocation is totally managed by the pinctrl subsystem,
 gpio (under gpiolib) is still maintained by gpio drivers. It may happen

Documentation/media/kapi/dtv-core.rst

 Digital TV (DVB) devices
 ------------------------
 
+Digital TV devices are implemented by several different drivers:
+
+- A bridge driver that is responsible to talk with the bus where the other
+  devices are connected (PCI, USB, SPI), bind to the other drivers and
+  implement the digital demux logic (either in software or in hardware);
+
+- Frontend drivers that are usually implemented as two separate drivers:
+
+  - A tuner driver that implements the logic with commands the part of the
+    hardware with is reponsible to tune into a digital TV transponder or
+    physical channel. The output of a tuner is usually a baseband or
+    Intermediate Frequency (IF) signal;
+
+  - A demodulator driver (a.k.a "demod") that implements the logic with
+    commands the digital TV decoding hardware. The output of a demod is
+    a digital stream, with multiple audio, video and data channels typically
+    multiplexed using MPEG Transport Stream [#f1]_.
+
+On most hardware, the frontend drivers talk with the bridge driver using an
+I2C bus.
+
+.. [#f1] Some standards use TCP/IP for multiplexing data, like DVB-H (an
+   abandoned standard, not used anymore) and ATSC version 3.0 current
+   proposals. Currently, the DVB subsystem doesn't implement those standards.
+
 Digital TV Common functions
 ---------------------------
 
@@ -55,8 +80,141 @@ Digital TV Frontend
 The Digital TV Frontend kABI defines a driver-internal interface for
 registering low-level, hardware specific driver to a hardware independent
 frontend layer. It is only of interest for Digital TV device driver writers.
-The header file for this API is named dvb_frontend.h and located in
-drivers/media/dvb-core.
+The header file for this API is named ``dvb_frontend.h`` and located in
+``drivers/media/dvb-core``.
+
+Demodulator driver
+^^^^^^^^^^^^^^^^^^
+
+The demodulator driver is responsible to talk with the decoding part of the
+hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with
+tells what type of digital TV standards are supported, and points to a
+series of functions that allow the DVB core to command the hardware via
+the code under ``drivers/media/dvb-core/dvb_frontend.c``.
+
+A typical example of such struct in a driver ``foo`` is::
+
+	static struct dvb_frontend_ops foo_ops = {
+		.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
+		.info = {
+			.name	= "foo DVB-T/T2/C driver",
+			.caps = FE_CAN_FEC_1_2 |
+				FE_CAN_FEC_2_3 |
+				FE_CAN_FEC_3_4 |
+				FE_CAN_FEC_5_6 |
+				FE_CAN_FEC_7_8 |
+				FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK |
+				FE_CAN_QAM_16 |
+				FE_CAN_QAM_32 |
+				FE_CAN_QAM_64 |
+				FE_CAN_QAM_128 |
+				FE_CAN_QAM_256 |
+				FE_CAN_QAM_AUTO |
+				FE_CAN_TRANSMISSION_MODE_AUTO |
+				FE_CAN_GUARD_INTERVAL_AUTO |
+				FE_CAN_HIERARCHY_AUTO |
+				FE_CAN_MUTE_TS |
+				FE_CAN_2G_MODULATION,
+			.frequency_min = 42000000, /* Hz */
+			.frequency_max = 1002000000, /* Hz */
+			.symbol_rate_min = 870000,
+			.symbol_rate_max = 11700000
+		},
+		.init = foo_init,
+		.sleep = foo_sleep,
+		.release = foo_release,
+		.set_frontend = foo_set_frontend,
+		.get_frontend = foo_get_frontend,
+		.read_status = foo_get_status_and_stats,
+		.tune = foo_tune,
+		.i2c_gate_ctrl = foo_i2c_gate_ctrl,
+		.get_frontend_algo = foo_get_algo,
+	};
+
+A typical example of such struct in a driver ``bar`` meant to be used on
+Satellite TV reception is::
+
+	static const struct dvb_frontend_ops bar_ops = {
+		.delsys = { SYS_DVBS, SYS_DVBS2 },
+		.info = {
+			.name		= "Bar DVB-S/S2 demodulator",
+			.frequency_min	= 500000, /* KHz */
+			.frequency_max	= 2500000, /* KHz */
+			.frequency_stepsize	= 0,
+			.symbol_rate_min = 1000000,
+			.symbol_rate_max = 45000000,
+			.symbol_rate_tolerance = 500,
+			.caps = FE_CAN_INVERSION_AUTO |
+				FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK,
+		},
+		.init = bar_init,
+		.sleep = bar_sleep,
+		.release = bar_release,
+		.set_frontend = bar_set_frontend,
+		.get_frontend = bar_get_frontend,
+		.read_status = bar_get_status_and_stats,
+		.i2c_gate_ctrl = bar_i2c_gate_ctrl,
+		.get_frontend_algo = bar_get_algo,
+		.tune = bar_tune,
+
+		/* Satellite-specific */
+		.diseqc_send_master_cmd = bar_send_diseqc_msg,
+		.diseqc_send_burst = bar_send_burst,
+		.set_tone = bar_set_tone,
+		.set_voltage = bar_set_voltage,
+	};
+
+.. note::
+
+   #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
+      frequencies are specified in kHz, while, for terrestrial and cable
+      standards, they're specified in Hz. Due to that, if the same frontend
+      supports both types, you'll need to have two separate
+      :c:type:`dvb_frontend_ops` structures, one for each standard.
+   #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
+      allows controlling an I2C gate (either directly of via some GPIO pin),
+      in order to remove the tuner from the I2C bus after a channel is
+      tuned.
+   #) All new drivers should implement the
+      :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
+      Yet, there are a number of callbacks meant to get statistics for
+      signal strength, S/N and UCB. Those are there to provide backward
+      compatibility with legacy applications that don't support the DVBv5
+      API. Implementing those callbacks are optional. Those callbacks may be
+      removed in the future, after we have all existing drivers supporting
+      DVBv5 stats.
+   #) Other callbacks are required for satellite TV standards, in order to
+      control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
+      ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
+
+.. |delta|   unicode:: U+00394
+
+The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is
+responsible for tuning the device. It supports multiple algoritms to
+detect a channel, as defined at enum :c:func:`dvbfe_algo`.
+
+The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
+doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
+``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
+e. g. it will try first to use the specified center frequency ``f``,
+then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
+``f`` - 2 x |delta| and so on.
+
+If the hardware has internally a some sort of zigzag algorithm, you should
+define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
+
+.. note::
+
+   The core frontend support also supports
+   a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
+   define its own hardware-assisted algorithm. Very few hardware need to
+   use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
+   function callbacks at struct :c:type:`dvb_frontend_ops`.
+
+Attaching frontend driver to the bridge driver
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Before using the Digital TV frontend core, the bridge driver should attach
 the frontend demod, tuner and SEC devices and call
@@ -74,6 +232,287 @@ part of their handler for :c:type:`device_driver`.\ ``resume()``.
 
 A few other optional functions are provided to handle some special cases.
 
+.. _dvbv5_stats:
+
+Digital TV Frontend statistics
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Introduction
+^^^^^^^^^^^^
+
+Digital TV frontends provide a range of
+:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
+and measuring the quality of service.
+
+For each statistics measurement, the driver should set the type of scale used,
+or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
+time. Drivers should also provide the number of statistics for each type.
+that's usually 1 for most video standards [#f2]_.
+
+Drivers should initialize each statistic counters with length and
+scale at its init code. For example, if the frontend provides signal
+strength, it should have, on its init code::
+
+	struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
+
+	c->strength.len = 1;
+	c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+And, when the statistics got updated, set the scale::
+
+	c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+	c->strength.stat[0].uvalue = strength;
+
+.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
+   set of statistics. On such cases, len should be equal to 4. The first
+   value corresponds to the global stat; the other ones to each layer, e. g.:
+
+   - c->cnr.stat[0] for global S/N carrier ratio,
+   - c->cnr.stat[1] for Layer A S/N carrier ratio,
+   - c->cnr.stat[2] for layer B S/N carrier ratio,
+   - c->cnr.stat[3] for layer C S/N carrier ratio.
+
+.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
+   ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
+
+Groups of statistics
+^^^^^^^^^^^^^^^^^^^^
+
+There are several groups of statistics currently supported:
+
+Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
+  - Measures the signal strength level at the analog part of the tuner or
+    demod.
+
+  - Typically obtained from the gain applied to the tuner and/or frontend
+    in order to detect the carrier. When no carrier is detected, the gain is
+    at the maximum value (so, strength is on its minimal).
+
+  - As the gain is visible through the set of registers that adjust the gain,
+    typically, this statistics is always available [#f3]_.
+
+  - Drivers should try to make it available all the times, as this statistics
+    can be used when adjusting an antenna position and to check for troubles
+    at the cabling.
+
+  .. [#f3] On a few devices, the gain keeps floating if no carrier.
+     On such devices, strength report should check first if carrier is
+     detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
+     and otherwise return the lowest possible value.
+
+Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
+  - Signal to Noise ratio for the main carrier.
+
+  - Signal to Noise measurement depends on the device. On some hardware, is
+    available when the main carrier is detected. On those hardware, CNR
+    measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
+    see :c:type:`fe_status`).
+
+    On other devices, it requires inner FEC decoding,
+    as the frontend measures it indirectly from other parameters (e. g. after
+    ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+    Having it available after inner FEC is more common.
+
+Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
+  - Those counters measure the number of bits and bit errors errors after
+    the forward error correction (FEC) on the inner coding block
+    (after Viterbi, LDPC or other inner code).
+
+  - Due to its nature, those statistics depend on full coding lock
+    (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
+    see :c:type:`fe_status`).
+
+Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
+  - Those counters measure the number of bits and bit errors errors before
+    the forward error correction (FEC) on the inner coding block
+    (before Viterbi, LDPC or other inner code).
+
+  - Not all frontends provide this kind of statistics.
+
+  - Due to its nature, those statistics depend on inner coding lock (e. g.
+    after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
+  - Those counters measure the number of blocks and block errors errors after
+    the forward error correction (FEC) on the inner coding block
+    (before Viterbi, LDPC or other inner code).
+
+  - Due to its nature, those statistics depend on full coding lock
+    (e. g. after ``FE_HAS_SYNC`` or after
+    ``FE_HAS_LOCK``, see :c:type:`fe_status`).
+
+.. note:: All counters should be monotonically increased as they're
+   collected from the hardware.
+
+A typical example of the logic that handle status and statistics is::
+
+	static int foo_get_status_and_stats(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+		int rc;
+		enum fe_status *status;
+
+		/* Both status and strength are always available */
+		rc = foo_read_status(fe, &status);
+		if (rc < 0)
+			return rc;
+
+		rc = foo_read_strength(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if CNR is available */
+		if (!(fe->status & FE_HAS_CARRIER))
+			return 0;
+
+		rc = foo_read_cnr(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if pre-BER stats are available */
+		if (!(fe->status & FE_HAS_VITERBI))
+			return 0;
+
+		rc = foo_get_pre_ber(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if post-BER stats are available */
+		if (!(fe->status & FE_HAS_SYNC))
+			return 0;
+
+		rc = foo_get_post_ber(fe);
+		if (rc < 0)
+			return rc;
+	}
+
+	static const struct dvb_frontend_ops ops = {
+		/* ... */
+		.read_status = foo_get_status_and_stats,
+	};
+
+Statistics collect
+^^^^^^^^^^^^^^^^^^
+
+On almost all frontend hardware, the bit and byte counts are stored by
+the hardware after a certain amount of time or after the total bit/block
+counter reaches a certain value (usually programable), for example, on
+every 1000 ms or after receiving 1,000,000 bits.
+
+So, if you read the registers too soon, you'll end by reading the same
+value as in the previous reading, causing the monotonic value to be
+incremented too often.
+
+Drivers should take the responsibility to avoid too often reads. That
+can be done using two approaches:
+
+if the driver have a bit that indicates when a collected data is ready
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Driver should check such bit before making the statistics available.
+
+An example of such behavior can be found at this code snippet (adapted
+from mb86a20s driver's logic)::
+
+	static int foo_get_pre_ber(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+		int rc, bit_error;
+
+		/* Check if the BER measures are already available */
+		rc = foo_read_u8(state, 0x54);
+		if (rc < 0)
+			return rc;
+
+		if (!rc)
+			return 0;
+
+		/* Read Bit Error Count */
+		bit_error = foo_read_u32(state, 0x55);
+		if (bit_error < 0)
+			return bit_error;
+
+		/* Read Total Bit Count */
+		rc = foo_read_u32(state, 0x51);
+		if (rc < 0)
+			return rc;
+
+		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_error.stat[0].uvalue += bit_error;
+		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_count.stat[0].uvalue += rc;
+
+		return 0;
+	}
+
+If the driver doesn't provide a statistics available check bit
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+A few devices, however, may not provide a way to check if the stats are
+available (or the way to check it is unknown). They may not even provide
+a way to directly read the total number of bits or blocks.
+
+On those devices, the driver need to ensure that it won't be reading from
+the register too often and/or estimate the total number of bits/blocks.
+
+On such drivers, a typical routine to get statistics would be like
+(adapted from dib8000 driver's logic)::
+
+	struct foo_state {
+		/* ... */
+
+		unsigned long per_jiffies_stats;
+	}
+
+	static int foo_get_pre_ber(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+		int rc, bit_error;
+		u64 bits;
+
+		/* Check if time for stats was elapsed */
+		if (!time_after(jiffies, state->per_jiffies_stats))
+			return 0;
+
+		/* Next stat should be collected in 1000 ms */
+		state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
+
+		/* Read Bit Error Count */
+		bit_error = foo_read_u32(state, 0x55);
+		if (bit_error < 0)
+			return bit_error;
+
+		/*
+		 * On this particular frontend, there's no register that
+		 * would provide the number of bits per 1000ms sample. So,
+		 * some function would calculate it based on DTV properties
+		 */
+		bits = get_number_of_bits_per_1000ms(fe);
+
+		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_error.stat[0].uvalue += bit_error;
+		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_count.stat[0].uvalue += bits;
+
+		return 0;
+	}
+
+Please notice that, on both cases, we're getting the statistics using the
+:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
+the frontend core will automatically call this function periodically
+(usually, 3 times per second, when the frontend is locked).
+
+That warrants that we won't miss to collect a counter and increment the
+monotonic stats at the right time.
+
+Digital TV Frontend functions and types
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
 .. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h
 
 

Documentation/media/uapi/v4l/constraints.svg

-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   version="1.2"
-   width="249.00998mm"
-   height="143.00999mm"
-   viewBox="0 0 24900.998 14300.999"
-   preserveAspectRatio="xMidYMid"
-   xml:space="preserve"
-   id="svg2"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="constraints.svg"
-   style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
-     id="metadata325"><rdf:RDF><cc:Work
-         rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview323"
-     showgrid="false"
-     inkscape:zoom="1.0818519"
-     inkscape:cx="270.29272"
-     inkscape:cy="249.83854"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg2"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0" /><defs
-     class="ClipPathGroup"
-     id="defs4"><marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker6261"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="Arrow1Mend"><path
-         transform="matrix(-0.4,0,0,-0.4,-4,0)"
-         style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1pt;stroke-opacity:1"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
-         id="path6263"
-         inkscape:connector-curvature="0" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker6125"
-       style="overflow:visible"
-       inkscape:isstock="true"
-       inkscape:collect="always"><path
-         id="path6127"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
-         style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1pt;stroke-opacity:1"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)"
-         inkscape:connector-curvature="0" /></marker><marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker6001"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="Arrow1Mend"
-       inkscape:collect="always"><path
-         transform="matrix(-0.4,0,0,-0.4,-4,0)"
-         style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1pt;stroke-opacity:1"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
-         id="path6003"
-         inkscape:connector-curvature="0" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker5693"
-       style="overflow:visible"
-       inkscape:isstock="true"
-       inkscape:collect="always"><path
-         id="path5695"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
-         style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1pt;stroke-opacity:1"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)"
-         inkscape:connector-curvature="0" /></marker><marker
-       inkscape:isstock="true"
-       style="overflow:visible"
-       id="marker5575"
-       refX="0"
-       refY="0"
-       orient="auto"
-       inkscape:stockid="Arrow1Mend"
-       inkscape:collect="always"><path
-         transform="matrix(-0.4,0,0,-0.4,-4,0)"
-         style="fill:#000080;fill-opacity:1;fill-rule:evenodd;stroke:#000080;stroke-width:1pt;stroke-opacity:1"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
-         id="path5577"
-         inkscape:connector-curvature="0" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker5469"
-       style="overflow:visible"
-       inkscape:isstock="true"
-       inkscape:collect="always"><path
-         id="path5471"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
-         style="fill:#000080;fill-opacity:1;fill-rule:evenodd;stroke:#000080;stroke-width:1pt;stroke-opacity:1"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)"
-         inkscape:connector-curvature="0" /></marker><marker
-       inkscape:stockid="Arrow1Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="marker5259"
-       style="overflow:visible"
-       inkscape:isstock="true"><path
-         id="path5261"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
-         style="fill:#000080;fill-opacity:1;fill-rule:evenodd;stroke:#000080;stroke-width:1pt;stroke-opacity:1"
-         transform="matrix(-0.4,0,0,-0.4,-4,0)"
-         inkscape:connector-curvature="0" /></marker><marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mend"
-       style="overflow:visible"
-       inkscape:isstock="true"><path
-         id="path4241"
-         style="fill:#000080;fill-opacity:1;fill-rule:evenodd;stroke:#000080;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(-0.6,-0.6)"
-         inkscape:connector-curvature="0" /></marker></defs><defs
-     id="defs9" /><defs
-     id="defs100" /><defs
-     id="defs123" /><defs
-     class="TextShapeIndex"
-     id="defs134" /><defs
-     class="EmbeddedBulletChars"
-     id="defs138" /><defs
-     class="TextEmbeddedBitmaps"
-     id="defs167" /><g
-     class="com.sun.star.drawing.CustomShape"
-     id="g204"
-     transform="translate(-1350,-3250)"><g
-       id="id6"><rect
-         class="BoundingBox"
-         x="1350"
-         y="3250"
-         width="24901"
-         height="14301"
-         id="rect207"
-         style="fill:none;stroke:none" /><path
-         d="m 13800,17500 -12400,0 0,-14200 24800,0 0,14200 -12400,0 z"
-         id="path209"
-         inkscape:connector-curvature="0"
-         style="fill:#ffffff;stroke:none" /><path
-         d="m 13800,17500 -12400,0 0,-14200 24800,0 0,14200 -12400,0 z"
-         id="path211"
-         inkscape:connector-curvature="0"
-         style="fill:none;stroke:#ff0000;stroke-width:100;stroke-linejoin:round" /><text
-         class="TextShape"
-         id="text213"><tspan
-           class="TextParagraph"
-           font-size="846px"
-           font-weight="400"
-           id="tspan215"
-           style="font-weight:400;font-size:846px;font-family:'Liberation Sans', sans-serif"><tspan
-             class="TextPosition"
-             x="1652"
-             y="17093"
-             id="tspan217"><tspan
-               id="tspan219"
-               style="fill:#ff0000;stroke:none" /><tspan
-               id="tspan221"
-               style="fill:#ff0000;stroke:none">V4L2_SEL_FLAG_GE</tspan></tspan></tspan></text>
-</g></g><rect
-     class="BoundingBox"
-     x="3000"
-     y="2200"
-     width="18101"
-     height="10101"
-     id="rect226"
-     style="fill:none;stroke:none" /><path
-     d="m 12050,12250 -9000,0 0,-10000 18000,0 0,10000 -9000,0 z"
-     id="path228"
-     inkscape:connector-curvature="0"
-     style="fill:#ffffff;stroke:none" /><path
-     d="m 12050,12250 -9000,0 0,-10000 18000,0 0,10000 -9000,0 z"
-     id="path230"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#000000;stroke-width:100;stroke-linejoin:round" /><text
-     class="TextShape"
-     id="text232"
-     x="-1350"
-     y="-3250"><tspan
-       class="TextParagraph"
-       font-size="987px"
-       font-weight="400"
-       id="tspan234"
-       style="font-weight:400;font-size:987px;font-family:'Liberation Sans', sans-serif"><tspan
-         class="TextPosition"
-         x="3227"
-         y="11503"
-         id="tspan236"><tspan
-           id="tspan238"
-           style="fill:#000000;stroke:none" /><tspan
-           id="tspan240"
-           style="fill:#000000;stroke:none">ORIGINAL</tspan></tspan></tspan></text>
-<g
-     class="com.sun.star.drawing.CustomShape"
-     id="g242"
-     transform="translate(-1350,-3250)"><g
-       id="id8"><rect
-         class="BoundingBox"
-         x="7050"
-         y="7950"
-         width="7901"
-         height="5501"
-         id="rect245"
-         style="fill:none;stroke:none" /><path
-         d="m 11000,13400 -3900,0 0,-5400 7800,0 0,5400 -3900,0 z"
-         id="path247"
-         inkscape:connector-curvature="0"
-         style="fill:#ffffff;stroke:none" /><path
-         d="m 11000,13400 -3900,0 0,-5400 7800,0 0,5400 -3900,0 z"
-         id="path249"
-         inkscape:connector-curvature="0"
-         style="fill:none;stroke:#3465a4;stroke-width:100;stroke-linejoin:round" /><text
-         class="TextShape"
-         id="text251"><tspan
-           class="TextParagraph"
-           font-size="776px"
-           font-weight="400"
-           id="tspan253"
-           style="font-weight:400;font-size:776px;font-family:'Liberation Sans', sans-serif"><tspan
-             class="TextPosition"
-             x="7228"
-             y="10969"
-             id="tspan255"><tspan
-               id="tspan257"
-               style="fill:#000080;stroke:none">V4L2_SEL_FLAG_LE</tspan></tspan></tspan></text>
-</g></g><rect
-     class="BoundingBox"
-     x="13700"
-     y="7100"
-     width="7101"
-     height="101"
-     id="rect262"
-     style="fill:none;stroke:none" /><path
-     d="m 20750,7150 -7000,0"
-     id="path264"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#000080;stroke-width:99.99134064;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Mend)" /><rect
-     class="BoundingBox"
-     x="3400"
-     y="7100"
-     width="2101"
-     height="101"
-     id="rect269"
-     style="fill:none;stroke:none" /><path
-     d="m 3450,7150 2000,0"
-     id="path271"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#000080;stroke-width:100;stroke-linejoin:round;marker-end:url(#marker5575)" /><rect
-     class="BoundingBox"
-     x="9800"
-     y="2900"
-     width="101"
-     height="1501"
-     id="rect276"
-     style="fill:none;stroke:none" /><path
-     d="m 9850,2950 0,1400"
-     id="path278"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#000080;stroke-width:100;stroke-linejoin:round;marker-end:url(#marker5259)" /><rect
-     class="BoundingBox"
-     x="9600"
-     y="10600"
-     width="101"
-     height="1301"
-     id="rect283"
-     style="fill:none;stroke:none" /><path
-     d="m 9650,11850 0,-1200"
-     id="path285"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#000080;stroke-width:100;stroke-linejoin:round;marker-end:url(#marker5469)" /><rect
-     class="BoundingBox"
-     x="450"
-     y="6850"
-     width="2051"
-     height="601"
-     id="rect290"
-     style="fill:none;stroke:none" /><path
-     d="m 2450,7150 -2000.8696,0"
-     id="path292"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#ff0000;stroke-width:132.48202515;stroke-linejoin:round;marker-end:url(#marker6125)" /><rect
-     class="BoundingBox"
-     x="21600"
-     y="6750"
-     width="2651"
-     height="601"
-     id="rect299"
-     style="fill:none;stroke:none" /><path
-     d="m 21650,7050 2522.609,0"
-     id="path301"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#ff0000;stroke-width:120.40660858;stroke-linejoin:round;marker-end:url(#marker6001)" /><rect
-     class="BoundingBox"
-     x="9550"
-     y="550"
-     width="601"
-     height="1451"
-     id="rect308"
-     style="fill:none;stroke:none" /><path
-     d="m 9836.957,1950 0,-1453.0435"
-     id="path310"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#ff0000;stroke-width:164.03721619;stroke-linejoin:round;marker-end:url(#marker6261)" /><rect
-     class="BoundingBox"
-     x="9350"
-     y="12500"
-     width="601"
-     height="1451"
-     id="rect317"
-     style="fill:none;stroke:none" /><path
-     d="m 9650,12550 0,1505.217"
-     id="path319"
-     inkscape:connector-curvature="0"
-     style="fill:none;stroke:#ff0000;stroke-width:166.95626831;stroke-linejoin:round;marker-end:url(#marker5693)" /></svg>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="svg2" width="249.01mm" height="143.01mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 24900.998 14300.999" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata325"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4" class="ClipPathGroup"><marker id="marker6261" overflow="visible" orient="auto"><path id="path6263" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6125" overflow="visible"
+orient="auto"><path id="path6127" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6001" overflow="visible" orient="auto"><path id="path6003" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5693" overflow="visible" orient="auto"><path id="path5695" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5575" overflow="visible" orient="auto"><path id="path5577" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5469" overflow="visible"
+orient="auto"><path id="path5471" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5259" overflow="visible" orient="auto"><path id="path5261" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="Arrow2Mend" overflow="visible" orient="auto"><path id="path4241" transform="scale(-.6)" d="m8.7186 4.0337-10.926-4.0177 10.926-4.0177c-1.7455 2.3721-1.7354 5.6175-6e-7 8.0354z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-linejoin="round" stroke-width=".625"/></marker></defs><g id="g204" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id6"><rect id="rect207" class="BoundingBox" x="1350" y="3250" width="24901" height="14301"
+fill="none"/><path id="path209" d="m13800 17500h-12400v-14200h24800v14200h-12400z" fill="#fff"/><path id="path211" d="m13800 17500h-12400v-14200h24800v14200h-12400z" fill="none" stroke="#f00" stroke-linejoin="round" stroke-width="100"/><text id="text213" class="TextShape"><tspan id="tspan215" class="TextParagraph" font-family="sans-serif" font-size="846px" font-weight="400"><tspan id="tspan217" class="TextPosition" x="1652" y="17093" fill="#ff0000"><tspan id="tspan219"/><tspan id="tspan221">V4L2_SEL_FLAG_GE</tspan></tspan></tspan></text>
+</g></g><rect id="rect226" class="BoundingBox" x="3e3" y="2200" width="18101" height="10101" fill="none"/><path id="path228" d="m12050 12250h-9e3v-1e4h18000v1e4h-9e3z" fill="#fff"/><path id="path230" d="m12050 12250h-9e3v-1e4h18000v1e4h-9e3z" fill="none" stroke="#000" stroke-linejoin="round" stroke-width="100"/><text id="text232" class="TextShape" x="-1350" y="-3250"><tspan id="tspan234" class="TextParagraph" font-family="sans-serif" font-size="987px" font-weight="400"><tspan id="tspan236" class="TextPosition" x="3227" y="11503" fill="#000000"><tspan id="tspan238"/><tspan id="tspan240">ORIGINAL</tspan></tspan></tspan></text>
+<g id="g242" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id8"><rect id="rect245" class="BoundingBox" x="7050" y="7950" width="7901" height="5501" fill="none"/><path id="path247" d="m11000 13400h-3900v-5400h7800v5400h-3900z" fill="#fff"/><path id="path249" d="m11000 13400h-3900v-5400h7800v5400h-3900z" fill="none" stroke="#3465a4" stroke-linejoin="round" stroke-width="100"/><text id="text251" class="TextShape"><tspan id="tspan253" class="TextParagraph" font-family="sans-serif" font-size="776px" font-weight="400"><tspan id="tspan255" class="TextPosition" x="7228" y="10969"><tspan id="tspan257" fill="#000080">V4L2_SEL_FLAG_LE</tspan></tspan></tspan></text>
+</g></g><rect id="rect262" class="BoundingBox" x="13700" y="7100" width="7101" height="101" fill="none"/><path id="path264" d="m20750 7150h-7e3" fill="none" marker-end="url(#Arrow2Mend)" stroke="#000080" stroke-linejoin="round" stroke-width="99.991"/><rect id="rect269" class="BoundingBox" x="3400" y="7100" width="2101" height="101" fill="none"/><path id="path271" d="m3450 7150h2e3" fill="none" marker-end="url(#marker5575)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect276" class="BoundingBox" x="9800" y="2900" width="101" height="1501" fill="none"/><path id="path278" d="m9850 2950v1400" fill="none" marker-end="url(#marker5259)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect283" class="BoundingBox" x="9600" y="10600" width="101" height="1301" fill="none"/><path id="path285" d="m9650 11850v-1200" fill="none"
+marker-end="url(#marker5469)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect290" class="BoundingBox" x="450" y="6850" width="2051" height="601" fill="none"/><path id="path292" d="m2450 7150h-2000.9" fill="none" marker-end="url(#marker6125)" stroke="#f00" stroke-linejoin="round" stroke-width="132.48"/><rect id="rect299" class="BoundingBox" x="21600" y="6750" width="2651" height="601" fill="none"/><path id="path301" d="m21650 7050h2522.6" fill="none" marker-end="url(#marker6001)" stroke="#f00" stroke-linejoin="round" stroke-width="120.41"/><rect id="rect308" class="BoundingBox" x="9550" y="550" width="601" height="1451" fill="none"/><path id="path310" d="m9837 1950v-1453" fill="none" marker-end="url(#marker6261)" stroke="#f00" stroke-linejoin="round" stroke-width="164.04"/><rect id="rect317" class="BoundingBox" x="9350" y="12500" width="601" height="1451"
+fill="none"/><path id="path319" d="m9650 12550v1505.2" fill="none" marker-end="url(#marker5693)" stroke="#f00" stroke-linejoin="round" stroke-width="166.96"/></svg>

Documentation/media/uapi/v4l/subdev-image-processing-crop.svg

@@ -18,11 +18,11 @@
      id="metadata100">
     <rdf:RDF>
       <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
+	 rdf:about="">
+	<dc:format>image/svg+xml</dc:format>
+	<dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+	<dc:title />
       </cc:Work>
     </rdf:RDF>
   </metadata>

Documentation/media/uapi/v4l/subdev-image-processing-full.svg

@@ -18,11 +18,11 @@
      id="metadata260">
     <rdf:RDF>
       <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
+	 rdf:about="">
+	<dc:format>image/svg+xml</dc:format>
+	<dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+	<dc:title />
       </cc:Work>
     </rdf:RDF>
   </metadata>

Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg

@@ -18,11 +18,11 @@
      id="metadata186">
     <rdf:RDF>
       <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
+	 rdf:about="">
+	<dc:format>image/svg+xml</dc:format>
+	<dc:type
+	   rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+	<dc:title />
       </cc:Work>
     </rdf:RDF>
   </metadata>