提交 cd6f37be 编写于 作者: M Michael Neuling 提交者: Benjamin Herrenschmidt

powerpc: Add VSX load/store alignment exception handler

VSX loads and stores will take an alignment exception when the address
is not on a 4 byte boundary.

This add support for these alignment exceptions and will emulate the
requested load or store.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
上级 7c292170
...@@ -48,6 +48,7 @@ struct aligninfo { ...@@ -48,6 +48,7 @@ struct aligninfo {
#define HARD 0x80 /* string, stwcx. */ #define HARD 0x80 /* string, stwcx. */
#define E4 0x40 /* SPE endianness is word */ #define E4 0x40 /* SPE endianness is word */
#define E8 0x80 /* SPE endianness is double word */ #define E8 0x80 /* SPE endianness is double word */
#define SPLT 0x80 /* VSX SPLAT load */
/* DSISR bits reported for a DCBZ instruction: */ /* DSISR bits reported for a DCBZ instruction: */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ #define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
...@@ -637,6 +638,36 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, ...@@ -637,6 +638,36 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
} }
#endif /* CONFIG_SPE */ #endif /* CONFIG_SPE */
#ifdef CONFIG_VSX
/*
* Emulate VSX instructions...
*/
static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
unsigned int areg, struct pt_regs *regs,
unsigned int flags, unsigned int length)
{
char *ptr = (char *) &current->thread.TS_FPR(reg);
int ret;
flush_vsx_to_thread(current);
if (flags & ST)
ret = __copy_to_user(addr, ptr, length);
else {
if (flags & SPLT){
ret = __copy_from_user(ptr, addr, length);
ptr += length;
}
ret |= __copy_from_user(ptr, addr, length);
}
if (flags & U)
regs->gpr[areg] = regs->dar;
if (ret)
return -EFAULT;
return 1;
}
#endif
/* /*
* Called on alignment exception. Attempts to fixup * Called on alignment exception. Attempts to fixup
* *
...@@ -647,7 +678,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, ...@@ -647,7 +678,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
int fix_alignment(struct pt_regs *regs) int fix_alignment(struct pt_regs *regs)
{ {
unsigned int instr, nb, flags; unsigned int instr, nb, flags, instruction = 0;
unsigned int reg, areg; unsigned int reg, areg;
unsigned int dsisr; unsigned int dsisr;
unsigned char __user *addr; unsigned char __user *addr;
...@@ -689,6 +720,7 @@ int fix_alignment(struct pt_regs *regs) ...@@ -689,6 +720,7 @@ int fix_alignment(struct pt_regs *regs)
if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE)) if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE))
instr = cpu_to_le32(instr); instr = cpu_to_le32(instr);
dsisr = make_dsisr(instr); dsisr = make_dsisr(instr);
instruction = instr;
} }
/* extract the operation and registers from the dsisr */ /* extract the operation and registers from the dsisr */
...@@ -728,6 +760,30 @@ int fix_alignment(struct pt_regs *regs) ...@@ -728,6 +760,30 @@ int fix_alignment(struct pt_regs *regs)
/* DAR has the operand effective address */ /* DAR has the operand effective address */
addr = (unsigned char __user *)regs->dar; addr = (unsigned char __user *)regs->dar;
#ifdef CONFIG_VSX
if ((instruction & 0xfc00003e) == 0x7c000018) {
/* Additional register addressing bit (64 VSX vs 32 FPR/GPR */
reg |= (instruction & 0x1) << 5;
/* Simple inline decoder instead of a table */
if (instruction & 0x200)
nb = 16;
else if (instruction & 0x080)
nb = 8;
else
nb = 4;
flags = 0;
if (instruction & 0x100)
flags |= ST;
if (instruction & 0x040)
flags |= U;
/* splat load needs a special decoder */
if ((instruction & 0x400) == 0){
flags |= SPLT;
nb = 8;
}
return emulate_vsx(addr, reg, areg, regs, flags, nb);
}
#endif
/* A size of 0 indicates an instruction we don't support, with /* A size of 0 indicates an instruction we don't support, with
* the exception of DCBZ which is handled as a special case here * the exception of DCBZ which is handled as a special case here
*/ */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册