V4L/DVB (5799): Or51211: remove hardcoded fcv1236d tuner programming

- Remove hardcoded fcv1236d tuner programmming from or51211.c
- Alter dvb-bt8xx for the pcHDTV-2000 to use dvb-pll for fcv1236d support.
Thanks to Jarom Hatch <jshatch@gmail.com> for testing this change.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/bt8xx/dvb-bt8xx.c

@@ -692,6 +692,9 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 
 	case BTTV_BOARD_PC_HDTV:
 		card->fe = dvb_attach(or51211_attach, &or51211_config, card->i2c_adapter);
+		if (card->fe != NULL)
+			dvb_attach(dvb_pll_attach, card->fe, 0x61,
+				   card->i2c_adapter, DVB_PLL_FCV1236D);
 		break;
 	}
 

drivers/media/dvb/frontends/or51211.c

@@ -223,38 +223,13 @@ static int or51211_set_parameters(struct dvb_frontend* fe,
 				  struct dvb_frontend_parameters *param)
 {
 	struct or51211_state* state = fe->demodulator_priv;
-	u32 freq = 0;
-	u16 tunerfreq = 0;
-	u8 buf[4];
 
 	/* Change only if we are actually changing the channel */
 	if (state->current_frequency != param->frequency) {
-		freq = 44000 + (param->frequency/1000);
-		tunerfreq = freq * 16/1000;
-
-		dprintk("set_parameters frequency = %d (tunerfreq = %d)\n",
-			param->frequency,tunerfreq);
-
-		buf[0] = (tunerfreq >> 8) & 0x7F;
-		buf[1] = (tunerfreq & 0xFF);
-		buf[2] = 0x8E;
-
-		if (param->frequency < 157250000) {
-			buf[3] = 0xA0;
-			dprintk("set_parameters VHF low range\n");
-		} else if (param->frequency < 454000000) {
-			buf[3] = 0x90;
-			dprintk("set_parameters VHF high range\n");
-		} else {
-			buf[3] = 0x30;
-			dprintk("set_parameters UHF range\n");
+		if (fe->ops.tuner_ops.set_params) {
+			fe->ops.tuner_ops.set_params(fe, param);
+			if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
 		}
-		dprintk("set_parameters tuner bytes: 0x%02x 0x%02x "
-			"0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]);
-
-		if (i2c_writebytes(state,0xC2>>1,buf,4))
-			printk(KERN_WARNING "or51211:set_parameters error "
-			       "writing to tuner\n");
 
 		/* Set to ATSC mode */
 		or51211_setmode(fe,0);