hwmon: (ltc2978) Add support for LTM4675

LTM2975 is a dual 9A or single 18A μModule regulator.
It is register compatible with LTM4676.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Documentation/hwmon/ltc2978

@@ -47,6 +47,10 @@ Supported chips:
     Prefix: 'ltm2987'
     Addresses scanned: -
     Datasheet: http://www.linear.com/product/ltm2987
+  * Linear Technology LTM4675
+    Prefix: 'ltm4675'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltm4675
   * Linear Technology LTM4676
     Prefix: 'ltm4676'
     Addresses scanned: -
@@ -70,6 +74,7 @@ LTC3883 is a single phase step-down DC/DC controller.
 LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
 additional components on a single die. The chip is instantiated and reported
 as two separate chips on two different I2C bus addresses.
+LTM4675 is a dual 9A or single 18A μModule regulator
 LTM4676 is a dual 13A or single 26A uModule regulator.
 
 
@@ -117,7 +122,8 @@ in[N]_label		"vout[1-8]".
 			LTC2974, LTC2975: N=2-5
 			LTC2977, LTC2980, LTM2987: N=2-9
 			LTC2978: N=2-9
-			LTC3880, LTC3882, LTC23886 LTC3887, LTM4676: N=2-3
+			LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
+				N=2-3
 			LTC3883: N=2
 in[N]_input		Measured output voltage.
 in[N]_min		Minimum output voltage.
@@ -139,9 +145,9 @@ temp[N]_input		Measured temperature.
 			On LTC2977, LTC2980, LTC2978, and LTM2987, only one
 			temperature measurement is supported and reports
 			the chip temperature.
-			On LTC3880, LTC3882, LTC3887, and LTM4676, temp1 and
-			temp2 report external temperatures, and temp3 reports
-			the chip temperature.
+			On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
+			temp1 and temp2 report external temperatures, and temp3
+			reports the chip temperature.
 			On LTC3883, temp1 reports an external temperature,
 			and temp2 reports the chip temperature.
 temp[N]_min		Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978,
@@ -172,12 +178,13 @@ power[N]_label		"pout[1-4]".
 			LTC2974, LTC2975: N=1-4
 			LTC2977, LTC2980, LTM2987: Not supported
 			LTC2978: Not supported
-			LTC3880, LTC3882, LTC3886, LTC3887, LTM4676: N=1-2
+			LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
+				N=1-2
 			LTC3883: N=2
 power[N]_input		Measured output power.
 
-curr1_label		"iin". LTC3880, LTC3883, LTC3886, LTC3887, and LTM4676
-			only.
+curr1_label		"iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
+			and LTM4676 only.
 curr1_input		Measured input current.
 curr1_max		Maximum input current.
 curr1_max_alarm		Input current high alarm.
@@ -188,7 +195,8 @@ curr[N]_label		"iout[1-4]".
 			LTC2974, LTC2975: N=1-4
 			LTC2977, LTC2980, LTM2987: not supported
 			LTC2978: not supported
-			LTC3880, LTC3882, LTC3886, LTC3887, LTM4676: N=2-3
+			LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
+				N=2-3
 			LTC3883: N=2
 curr[N]_input		Measured output current.
 curr[N]_max		Maximum output current.

drivers/hwmon/pmbus/Kconfig

@@ -53,7 +53,7 @@ config SENSORS_LTC2978
 	help
 	  If you say yes here you get hardware monitoring support for Linear
 	  Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
-	  LTC3883, LTC3886, LTC3887, LTCM2987, and LTM4676.
+	  LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called ltc2978.

drivers/hwmon/pmbus/ltc2978.c

@@ -28,7 +28,7 @@
 #include "pmbus.h"
 
 enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
-	ltc3883, ltc3886, ltc3887, ltm2987, ltm4676 };
+	ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
 
 /* Common for all chips */
 #define LTC2978_MFR_VOUT_PEAK		0xdd
@@ -46,7 +46,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
 #define LTC2974_MFR_IOUT_PEAK		0xd7
 #define LTC2974_MFR_IOUT_MIN		0xd8
 
-/* LTC3880, LTC3882, LTC3883, LTC3887, and LTM4676 */
+/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */
 #define LTC3880_MFR_IOUT_PEAK		0xd7
 #define LTC3880_MFR_CLEAR_PEAKS		0xe3
 #define LTC3880_MFR_TEMPERATURE2_PEAK	0xf4
@@ -77,6 +77,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
 #define LTC3887_ID			0x4700
 #define LTM2987_ID_A			0x8010	/* A/B for two die IDs */
 #define LTM2987_ID_B			0x8020
+#define LTM4675_ID			0x47a0
 #define LTM4676_ID_REV1			0x4400
 #define LTM4676_ID_REV2			0x4480
 #define LTM4676A_ID			0x47e0
@@ -509,6 +510,7 @@ static const struct i2c_device_id ltc2978_id[] = {
 	{"ltc3886", ltc3886},
 	{"ltc3887", ltc3887},
 	{"ltm2987", ltm2987},
+	{"ltm4675", ltm4675},
 	{"ltm4676", ltm4676},
 	{}
 };
@@ -581,6 +583,8 @@ static int ltc2978_get_id(struct i2c_client *client)
 		return ltc3887;
 	else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
 		return ltm2987;
+	else if (chip_id == LTM4675_ID)
+		return ltm4675;
 	else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
 		 chip_id == LTM4676A_ID)
 		return ltm4676;
@@ -678,6 +682,7 @@ static int ltc2978_probe(struct i2c_client *client,
 		break;
 	case ltc3880:
 	case ltc3887:
+	case ltm4675:
 	case ltm4676:
 		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 		info->read_word_data = ltc3880_read_word_data;
@@ -763,6 +768,7 @@ static const struct of_device_id ltc2978_of_match[] = {
 	{ .compatible = "lltc,ltc3886" },
 	{ .compatible = "lltc,ltc3887" },
 	{ .compatible = "lltc,ltm2987" },
+	{ .compatible = "lltc,ltm4675" },
 	{ .compatible = "lltc,ltm4676" },
 	{ }
 };