提交 cc72da7d 编写于 作者: T Takashi Iwai

ALSA: hda - Use standard runtime PM for codec power-save control

Like the previous transition of suspend/resume, now move the
power-save code to the standard runtime PM.  As usual for runtime PM,
it's a bit tricky, but this simplified codes a lot in the end.

For keeping the usage compatibility, power_save module option still
controls the whole power-saving behavior on all codecs.  The value is
translated to pm_runtime_*_autosuspend() and pm_runtime_allow() /
pm_runtime_forbid() calls.

snd_hda_power_up() and snd_hda_power_down() are translated to
pm_runtime_get_sync() and pm_runtime_put_autosuspend(), respectively.
Since we can do call pm_runtime_get_sync() more reliably, the sync
version is used always and snd_hda_power_up_d3wait() is dropped.
Another slight difference is that snd_hda_power_up()/down() don't call
runtime_pm code during the suspend/resume transition phase.  Calling
them there isn't safe unlike our own code, resulted in unexpected
behavior (endless wakeups).

The hda_power_count tracepoint was removed, as it doesn't match well
with the new code.

Last but not least, we need to set ignore_children flag in the parent
dev.power field so that the runtime PM of the controller chip won't
get confused.  The notification is still done in the bus pm_notify
callback.  We'll get rid of this hack in the later patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 59ed1ead
......@@ -26,6 +26,8 @@
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/async.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <sound/core.h>
#include "hda_codec.h"
#include <sound/asoundef.h>
......@@ -41,10 +43,9 @@
#include "hda_trace.h"
#ifdef CONFIG_PM
#define codec_in_pm(codec) ((codec)->in_pm)
static void hda_power_work(struct work_struct *work);
static void hda_keep_power_on(struct hda_codec *codec);
#define hda_codec_is_power_on(codec) ((codec)->power_on)
#define codec_in_pm(codec) atomic_read(&(codec)->in_pm)
#define hda_codec_is_power_on(codec) \
(!pm_runtime_suspended(hda_codec_dev(codec)))
static void hda_call_pm_notify(struct hda_codec *codec, bool power_up)
{
......@@ -60,7 +61,6 @@ static void hda_call_pm_notify(struct hda_codec *codec, bool power_up)
#else
#define codec_in_pm(codec) 0
static inline void hda_keep_power_on(struct hda_codec *codec) {}
#define hda_codec_is_power_on(codec) 1
#define hda_call_pm_notify(codec, state) {}
#endif
......@@ -1144,10 +1144,7 @@ static void snd_hda_codec_free(struct hda_codec *codec)
device_del(hda_codec_dev(codec));
snd_hda_jack_tbl_clear(codec);
free_init_pincfgs(codec);
#ifdef CONFIG_PM
cancel_delayed_work(&codec->power_work);
flush_workqueue(codec->bus->workq);
#endif
list_del(&codec->list);
snd_array_free(&codec->mixers);
snd_array_free(&codec->nids);
......@@ -1178,6 +1175,10 @@ static int snd_hda_codec_dev_register(struct snd_device *device)
struct hda_codec *codec = device->device_data;
snd_hda_register_beep_device(codec);
if (device_is_registered(hda_codec_dev(codec))) {
snd_hda_power_sync(codec);
pm_runtime_enable(hda_codec_dev(codec));
}
return 0;
}
......@@ -1274,13 +1275,14 @@ int snd_hda_codec_new(struct hda_bus *bus,
codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
#ifdef CONFIG_PM
spin_lock_init(&codec->power_lock);
INIT_DELAYED_WORK(&codec->power_work, hda_power_work);
/* snd_hda_codec_new() marks the codec as power-up, and leave it as is.
* the caller has to power down appropriatley after initialization
* phase.
*/
hda_keep_power_on(codec);
pm_runtime_set_active(hda_codec_dev(codec));
pm_runtime_get_noresume(hda_codec_dev(codec));
codec->power_jiffies = jiffies;
hda_call_pm_notify(codec, true);
#endif
snd_hda_sysfs_init(codec);
......@@ -2453,10 +2455,7 @@ int snd_hda_codec_reset(struct hda_codec *codec)
/* OK, let it free */
cancel_delayed_work_sync(&codec->jackpoll_work);
#ifdef CONFIG_PM
cancel_delayed_work_sync(&codec->power_work);
flush_workqueue(bus->workq);
#endif
snd_hda_ctls_clear(codec);
/* release PCMs */
for (i = 0; i < codec->num_pcms; i++) {
......@@ -3893,31 +3892,40 @@ static inline void hda_exec_init_verbs(struct hda_codec *codec) {}
#endif
#ifdef CONFIG_PM
/* update the power on/off account with the current jiffies */
static void update_power_acct(struct hda_codec *codec, bool on)
{
unsigned long delta = jiffies - codec->power_jiffies;
if (on)
codec->power_on_acct += delta;
else
codec->power_off_acct += delta;
codec->power_jiffies += delta;
}
void snd_hda_update_power_acct(struct hda_codec *codec)
{
update_power_acct(codec, hda_codec_is_power_on(codec));
}
/*
* call suspend and power-down; used both from PM and power-save
* this function returns the power state in the end
*/
static unsigned int hda_call_codec_suspend(struct hda_codec *codec, bool in_wq)
static unsigned int hda_call_codec_suspend(struct hda_codec *codec)
{
unsigned int state;
codec->in_pm = 1;
atomic_inc(&codec->in_pm);
if (codec->patch_ops.suspend)
codec->patch_ops.suspend(codec);
hda_cleanup_all_streams(codec);
state = hda_set_power_state(codec, AC_PWRST_D3);
/* Cancel delayed work if we aren't currently running from it. */
if (!in_wq)
cancel_delayed_work_sync(&codec->power_work);
spin_lock(&codec->power_lock);
snd_hda_update_power_acct(codec);
trace_hda_power_down(codec);
codec->power_on = 0;
codec->power_transition = 0;
codec->power_jiffies = jiffies;
spin_unlock(&codec->power_lock);
codec->in_pm = 0;
update_power_acct(codec, true);
atomic_dec(&codec->in_pm);
return state;
}
......@@ -3942,14 +3950,14 @@ static void hda_mark_cmd_cache_dirty(struct hda_codec *codec)
*/
static void hda_call_codec_resume(struct hda_codec *codec)
{
codec->in_pm = 1;
atomic_inc(&codec->in_pm);
trace_hda_power_up(codec);
hda_mark_cmd_cache_dirty(codec);
/* set as if powered on for avoiding re-entering the resume
* in the resume / power-save sequence
*/
hda_keep_power_on(codec);
codec->power_jiffies = jiffies;
hda_call_pm_notify(codec, true);
hda_set_power_state(codec, AC_PWRST_D0);
restore_shutup_pins(codec);
hda_exec_init_verbs(codec);
......@@ -3967,34 +3975,38 @@ static void hda_call_codec_resume(struct hda_codec *codec)
hda_jackpoll_work(&codec->jackpoll_work.work);
else
snd_hda_jack_report_sync(codec);
codec->in_pm = 0;
snd_hda_power_down(codec); /* flag down before returning */
atomic_dec(&codec->in_pm);
}
static int hda_codec_driver_suspend(struct device *dev)
static int hda_codec_runtime_suspend(struct device *dev)
{
struct hda_codec *codec = dev_to_hda_codec(dev);
unsigned int state;
int i;
cancel_delayed_work_sync(&codec->jackpoll_work);
for (i = 0; i < codec->num_pcms; i++)
snd_pcm_suspend_all(codec->pcm_info[i].pcm);
hda_call_codec_suspend(codec, false);
state = hda_call_codec_suspend(codec);
if (!codec->bus->power_keep_link_on && (state & AC_PWRST_CLK_STOP_OK))
hda_call_pm_notify(codec, false);
return 0;
}
static int hda_codec_driver_resume(struct device *dev)
static int hda_codec_runtime_resume(struct device *dev)
{
hda_call_codec_resume(dev_to_hda_codec(dev));
pm_runtime_mark_last_busy(dev);
return 0;
}
#endif /* CONFIG_PM */
/* referred in hda_bind.c */
const struct dev_pm_ops hda_codec_driver_pm = {
SET_SYSTEM_SLEEP_PM_OPS(hda_codec_driver_suspend,
hda_codec_driver_resume)
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(hda_codec_runtime_suspend, hda_codec_runtime_resume,
NULL)
};
/**
......@@ -4733,127 +4745,66 @@ int snd_hda_add_new_ctls(struct hda_codec *codec,
EXPORT_SYMBOL_GPL(snd_hda_add_new_ctls);
#ifdef CONFIG_PM
static void hda_power_work(struct work_struct *work)
/**
* snd_hda_power_up - Power-up the codec
* @codec: HD-audio codec
*
* Increment the usage counter and resume the device if not done yet.
*/
void snd_hda_power_up(struct hda_codec *codec)
{
struct hda_codec *codec =
container_of(work, struct hda_codec, power_work.work);
struct hda_bus *bus = codec->bus;
unsigned int state;
struct device *dev = hda_codec_dev(codec);
spin_lock(&codec->power_lock);
if (codec->power_transition > 0) { /* during power-up sequence? */
spin_unlock(&codec->power_lock);
if (codec_in_pm(codec))
return;
}
if (!codec->power_on || codec->power_count) {
codec->power_transition = 0;
spin_unlock(&codec->power_lock);
return;
}
spin_unlock(&codec->power_lock);
state = hda_call_codec_suspend(codec, true);
if (!bus->power_keep_link_on && (state & AC_PWRST_CLK_STOP_OK))
hda_call_pm_notify(codec, false);
pm_runtime_get_sync(dev);
}
EXPORT_SYMBOL_GPL(snd_hda_power_up);
static void hda_keep_power_on(struct hda_codec *codec)
/**
* snd_hda_power_down - Power-down the codec
* @codec: HD-audio codec
*
* Decrement the usage counter and schedules the autosuspend if none used.
*/
void snd_hda_power_down(struct hda_codec *codec)
{
spin_lock(&codec->power_lock);
codec->power_count++;
codec->power_on = 1;
codec->power_jiffies = jiffies;
spin_unlock(&codec->power_lock);
hda_call_pm_notify(codec, true);
}
struct device *dev = hda_codec_dev(codec);
/* update the power on/off account with the current jiffies */
void snd_hda_update_power_acct(struct hda_codec *codec)
{
unsigned long delta = jiffies - codec->power_jiffies;
if (codec->power_on)
codec->power_on_acct += delta;
else
codec->power_off_acct += delta;
codec->power_jiffies += delta;
}
/* Transition to powered up, if wait_power_down then wait for a pending
* transition to D3 to complete. A pending D3 transition is indicated
* with power_transition == -1. */
/* call this with codec->power_lock held! */
static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down)
{
/* Return if power_on or transitioning to power_on, unless currently
* powering down. */
if ((codec->power_on || codec->power_transition > 0) &&
!(wait_power_down && codec->power_transition < 0))
if (codec_in_pm(codec))
return;
spin_unlock(&codec->power_lock);
cancel_delayed_work_sync(&codec->power_work);
spin_lock(&codec->power_lock);
/* If the power down delayed work was cancelled above before starting,
* then there is no need to go through power up here.
*/
if (codec->power_on) {
if (codec->power_transition < 0)
codec->power_transition = 0;
return;
}
trace_hda_power_up(codec);
snd_hda_update_power_acct(codec);
codec->power_on = 1;
codec->power_jiffies = jiffies;
codec->power_transition = 1; /* avoid reentrance */
spin_unlock(&codec->power_lock);
hda_call_codec_resume(codec);
spin_lock(&codec->power_lock);
codec->power_transition = 0;
}
#define power_save(codec) \
((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
/* Transition to powered down */
static void __snd_hda_power_down(struct hda_codec *codec)
{
if (!codec->power_on || codec->power_count || codec->power_transition)
return;
if (power_save(codec)) {
codec->power_transition = -1; /* avoid reentrance */
queue_delayed_work(codec->bus->workq, &codec->power_work,
msecs_to_jiffies(power_save(codec) * 1000));
}
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
EXPORT_SYMBOL_GPL(snd_hda_power_down);
/**
* snd_hda_power_save - Power-up/down/sync the codec
* snd_hda_power_sync - Synchronize the power_save option
* @codec: HD-audio codec
* @delta: the counter delta to change
* @d3wait: sync for D3 transition complete
*
* Change the power-up counter via @delta, and power up or down the hardware
* appropriately. For the power-down, queue to the delayed action.
* Passing zero to @delta means to synchronize the power state.
* Synchronize the runtime PM autosuspend state from the power_save option.
*/
void snd_hda_power_save(struct hda_codec *codec, int delta, bool d3wait)
void snd_hda_power_sync(struct hda_codec *codec)
{
spin_lock(&codec->power_lock);
codec->power_count += delta;
trace_hda_power_count(codec);
if (delta > 0)
__snd_hda_power_up(codec, d3wait);
else
__snd_hda_power_down(codec);
spin_unlock(&codec->power_lock);
struct device *dev = hda_codec_dev(codec);
int delay;
if (!codec->bus->power_save)
return;
delay = *codec->bus->power_save * 1000;
if (delay > 0) {
pm_runtime_set_autosuspend_delay(dev, delay);
pm_runtime_use_autosuspend(dev);
pm_runtime_allow(dev);
if (!pm_runtime_suspended(dev))
pm_runtime_mark_last_busy(dev);
} else {
pm_runtime_dont_use_autosuspend(dev);
pm_runtime_forbid(dev);
}
}
EXPORT_SYMBOL_GPL(snd_hda_power_save);
EXPORT_SYMBOL_GPL(snd_hda_power_sync);
/**
* snd_hda_check_amp_list_power - Check the amp list and update the power
......@@ -5542,7 +5493,7 @@ void snd_hda_bus_reset(struct hda_bus *bus)
cancel_delayed_work_sync(&codec->jackpoll_work);
#ifdef CONFIG_PM
if (hda_codec_is_power_on(codec)) {
hda_call_codec_suspend(codec, false);
hda_call_codec_suspend(codec);
hda_call_codec_resume(codec);
}
#endif
......
......@@ -372,17 +372,12 @@ struct hda_codec {
unsigned int dp_mst:1; /* support DP1.2 Multi-stream transport */
unsigned int dump_coef:1; /* dump processing coefs in codec proc file */
#ifdef CONFIG_PM
unsigned int power_on :1; /* current (global) power-state */
unsigned int d3_stop_clk:1; /* support D3 operation without BCLK */
unsigned int pm_up_notified:1; /* PM notified to controller */
unsigned int in_pm:1; /* suspend/resume being performed */
int power_transition; /* power-state in transition */
int power_count; /* current (global) power refcount */
struct delayed_work power_work; /* delayed task for powerdown */
atomic_t in_pm; /* suspend/resume being performed */
unsigned long power_on_acct;
unsigned long power_off_acct;
unsigned long power_jiffies;
spinlock_t power_lock;
#endif
/* filter the requested power state per nid */
......@@ -595,64 +590,16 @@ const char *snd_hda_get_jack_location(u32 cfg);
* power saving
*/
#ifdef CONFIG_PM
void snd_hda_power_save(struct hda_codec *codec, int delta, bool d3wait);
void snd_hda_power_up(struct hda_codec *codec);
void snd_hda_power_down(struct hda_codec *codec);
void snd_hda_power_sync(struct hda_codec *codec);
void snd_hda_update_power_acct(struct hda_codec *codec);
#else
static inline void snd_hda_power_save(struct hda_codec *codec, int delta,
bool d3wait) {}
static inline void snd_hda_power_up(struct hda_codec *codec) {}
static inline void snd_hda_power_down(struct hda_codec *codec) {}
static inline void snd_hda_power_sync(struct hda_codec *codec) {}
#endif
/**
* snd_hda_power_up - Power-up the codec
* @codec: HD-audio codec
*
* Increment the power-up counter and power up the hardware really when
* not turned on yet.
*/
static inline void snd_hda_power_up(struct hda_codec *codec)
{
snd_hda_power_save(codec, 1, false);
}
/**
* snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending
* D3 transition to complete. This differs from snd_hda_power_up() when
* power_transition == -1. snd_hda_power_up sees this case as a nop,
* snd_hda_power_up_d3wait waits for the D3 transition to complete then powers
* back up.
* @codec: HD-audio codec
*
* Cancel any power down operation hapenning on the work queue, then power up.
*/
static inline void snd_hda_power_up_d3wait(struct hda_codec *codec)
{
snd_hda_power_save(codec, 1, true);
}
/**
* snd_hda_power_down - Power-down the codec
* @codec: HD-audio codec
*
* Decrement the power-up counter and schedules the power-off work if
* the counter rearches to zero.
*/
static inline void snd_hda_power_down(struct hda_codec *codec)
{
snd_hda_power_save(codec, -1, false);
}
/**
* snd_hda_power_sync - Synchronize the power-save status
* @codec: HD-audio codec
*
* Synchronize the actual power state with the power account;
* called when power_save parameter is changed
*/
static inline void snd_hda_power_sync(struct hda_codec *codec)
{
snd_hda_power_save(codec, 0, false);
}
#ifdef CONFIG_SND_HDA_PATCH_LOADER
/*
* patch firmware
......
......@@ -836,7 +836,7 @@ static int azx_pcm_open(struct snd_pcm_substream *substream)
buff_step);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
buff_step);
snd_hda_power_up_d3wait(apcm->codec);
snd_hda_power_up(apcm->codec);
err = hinfo->ops.open(hinfo, apcm->codec, substream);
if (err < 0) {
azx_release_device(azx_dev);
......
......@@ -1087,6 +1087,7 @@ static int azx_free(struct azx *chip)
azx_stop_chip(chip);
}
pci->dev.power.ignore_children = 0; /* FIXME */
if (chip->irq >= 0)
free_irq(chip->irq, (void*)chip);
if (chip->msi)
......@@ -1796,6 +1797,7 @@ static int azx_probe(struct pci_dev *pci,
return err;
}
pci->dev.power.ignore_children = 1; /* FIXME */
err = azx_create(card, pci, dev, pci_id->driver_data,
&pci_hda_ops, &chip);
if (err < 0)
......
......@@ -87,30 +87,6 @@ DEFINE_EVENT(hda_power, hda_power_up,
TP_PROTO(struct hda_codec *codec),
TP_ARGS(codec)
);
TRACE_EVENT(hda_power_count,
TP_PROTO(struct hda_codec *codec),
TP_ARGS(codec),
TP_STRUCT__entry(
__field( unsigned int, card )
__field( unsigned int, addr )
__field( int, power_count )
__field( int, power_on )
__field( int, power_transition )
),
TP_fast_assign(
__entry->card = (codec)->bus->card->number;
__entry->addr = (codec)->addr;
__entry->power_count = (codec)->power_count;
__entry->power_on = (codec)->power_on;
__entry->power_transition = (codec)->power_transition;
),
TP_printk("[%d:%d] power_count=%d, power_on=%d, power_transition=%d",
__entry->card, __entry->addr, __entry->power_count,
__entry->power_on, __entry->power_transition)
);
#endif /* CONFIG_PM */
TRACE_EVENT(hda_unsol_event,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册