OMAP4: hwmod: Naming of address space

Added a name to address space belonging to SDMA and MPU facilitating
the driver to get the address space info by name. Added a revision
member inorder to facilitate the driver to differentiate between
mcbsp in different omap.
Also added a platform_get_irq in probe to get irq number by index since
from OMAP4, there will be a single irq line.
Signed-off-by: NBenoit Cousson <b-cousson@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -25,6 +25,7 @@
 #include <plat/gpio.h>
 #include <plat/dma.h>
 #include <plat/mcspi.h>
+#include <plat/mcbsp.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -2737,6 +2738,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = {
 static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = {
 	.name	= "mcbsp",
 	.sysc	= &omap44xx_mcbsp_sysc,
+	.rev	= MCBSP_CONFIG_TYPE4,
 };
 
 /* mcbsp1 */
@@ -2752,6 +2754,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = {
 
 static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = {
 	{
+		.name		= "mpu",
 		.pa_start	= 0x40122000,
 		.pa_end		= 0x401220ff,
 		.flags		= ADDR_TYPE_RT
@@ -2770,6 +2773,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
 
 static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = {
 	{
+		.name		= "dma",
 		.pa_start	= 0x49022000,
 		.pa_end		= 0x490220ff,
 		.flags		= ADDR_TYPE_RT
@@ -2823,6 +2827,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = {
 
 static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = {
 	{
+		.name		= "mpu",
 		.pa_start	= 0x40124000,
 		.pa_end		= 0x401240ff,
 		.flags		= ADDR_TYPE_RT
@@ -2841,6 +2846,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
 
 static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = {
 	{
+		.name		= "dma",
 		.pa_start	= 0x49024000,
 		.pa_end		= 0x490240ff,
 		.flags		= ADDR_TYPE_RT
@@ -2894,6 +2900,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = {
 
 static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = {
 	{
+		.name		= "mpu",
 		.pa_start	= 0x40126000,
 		.pa_end		= 0x401260ff,
 		.flags		= ADDR_TYPE_RT
@@ -2912,6 +2919,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
 
 static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = {
 	{
+		.name		= "dma",
 		.pa_start	= 0x49026000,
 		.pa_end		= 0x490260ff,
 		.flags		= ADDR_TYPE_RT

arch/arm/plat-omap/include/plat/mcbsp.h

@@ -39,6 +39,7 @@ static struct platform_device omap_mcbsp##port_nr = {	\
 
 #define MCBSP_CONFIG_TYPE2	0x2
 #define MCBSP_CONFIG_TYPE3	0x3
+#define MCBSP_CONFIG_TYPE4	0x4
 
 #define OMAP7XX_MCBSP1_BASE	0xfffb1000
 #define OMAP7XX_MCBSP2_BASE	0xfffb1800

arch/arm/plat-omap/mcbsp.c

@@ -1812,6 +1812,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
 	mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
 
+	/* From OMAP4 there will be a single irq line */
+	if (mcbsp->tx_irq == -ENXIO)
+		mcbsp->tx_irq = platform_get_irq(pdev, 0);
+
 	res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
 	if (!res) {
 		dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n",