提交 ca1376d1 编写于 作者: L Linus Torvalds

Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: WM8903: Fix Digital Capture Volume range
  ASoC: UDA134x: Remove POWER_OFF_ON_STANDBY define.
  ASoC: SSM2602: Fix reg_cache_size
  ASoC: SSM2602: Fix 'Mic Boost2' control
  ASoC: SSM2602: Properly annotate i2c probe and remove functions
  ASoC: sst_platform: add hw_free callback to fix resource leak
  ASoC: Don't crash on PM operations
  ASoC: JZ4740: Fix i2s shutdown
......@@ -139,7 +139,7 @@ SOC_DOUBLE_R("Capture Volume", SSM2602_LINVOL, SSM2602_RINVOL, 0, 31, 0),
SOC_DOUBLE_R("Capture Switch", SSM2602_LINVOL, SSM2602_RINVOL, 7, 1, 1),
SOC_SINGLE("Mic Boost (+20dB)", SSM2602_APANA, 0, 1, 0),
SOC_SINGLE("Mic Boost2 (+20dB)", SSM2602_APANA, 7, 1, 0),
SOC_SINGLE("Mic Boost2 (+20dB)", SSM2602_APANA, 8, 1, 0),
SOC_SINGLE("Mic Switch", SSM2602_APANA, 1, 1, 1),
SOC_SINGLE("Sidetone Playback Volume", SSM2602_APANA, 6, 3, 1),
......@@ -602,7 +602,7 @@ static struct snd_soc_codec_driver soc_codec_dev_ssm2602 = {
.read = ssm2602_read_reg_cache,
.write = ssm2602_write,
.set_bias_level = ssm2602_set_bias_level,
.reg_cache_size = sizeof(ssm2602_reg),
.reg_cache_size = ARRAY_SIZE(ssm2602_reg),
.reg_word_size = sizeof(u16),
.reg_cache_default = ssm2602_reg,
};
......@@ -614,7 +614,7 @@ static struct snd_soc_codec_driver soc_codec_dev_ssm2602 = {
* low = 0x1a
* high = 0x1b
*/
static int ssm2602_i2c_probe(struct i2c_client *i2c,
static int __devinit ssm2602_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct ssm2602_priv *ssm2602;
......@@ -635,7 +635,7 @@ static int ssm2602_i2c_probe(struct i2c_client *i2c,
return ret;
}
static int ssm2602_i2c_remove(struct i2c_client *client)
static int __devexit ssm2602_i2c_remove(struct i2c_client *client)
{
snd_soc_unregister_codec(&client->dev);
kfree(i2c_get_clientdata(client));
......@@ -655,7 +655,7 @@ static struct i2c_driver ssm2602_i2c_driver = {
.owner = THIS_MODULE,
},
.probe = ssm2602_i2c_probe,
.remove = ssm2602_i2c_remove,
.remove = __devexit_p(ssm2602_i2c_remove),
.id_table = ssm2602_i2c_id,
};
#endif
......
......@@ -601,9 +601,7 @@ static struct snd_soc_codec_driver soc_codec_dev_uda134x = {
.reg_cache_step = 1,
.read = uda134x_read_reg_cache,
.write = uda134x_write,
#ifdef POWER_OFF_ON_STANDBY
.set_bias_level = uda134x_set_bias_level,
#endif
};
static int __devinit uda134x_codec_probe(struct platform_device *pdev)
......
......@@ -692,7 +692,7 @@ SOC_ENUM("DRC Smoothing Threshold", drc_smoothing),
SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
SOC_ENUM("ADC Companding Mode", adc_companding),
SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
......
......@@ -133,7 +133,7 @@ static void jz4740_i2s_shutdown(struct snd_pcm_substream *substream,
struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai);
uint32_t conf;
if (!dai->active)
if (dai->active)
return;
conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
......
......@@ -376,6 +376,11 @@ static int sst_platform_pcm_hw_params(struct snd_pcm_substream *substream,
return 0;
}
static int sst_platform_pcm_hw_free(struct snd_pcm_substream *substream)
{
return snd_pcm_lib_free_pages(substream);
}
static struct snd_pcm_ops sst_platform_ops = {
.open = sst_platform_open,
.close = sst_platform_close,
......@@ -384,6 +389,7 @@ static struct snd_pcm_ops sst_platform_ops = {
.trigger = sst_platform_pcm_trigger,
.pointer = sst_platform_pcm_pointer,
.hw_params = sst_platform_pcm_hw_params,
.hw_free = sst_platform_pcm_hw_free,
};
static void sst_pcm_free(struct snd_pcm *pcm)
......
......@@ -3291,6 +3291,8 @@ int snd_soc_register_card(struct snd_soc_card *card)
if (!card->name || !card->dev)
return -EINVAL;
dev_set_drvdata(card->dev, card);
snd_soc_initialize_card_lists(card);
soc_init_card_debugfs(card);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册