Merge tag 'v4.8-rc8' into drm-next

Linux 4.8-rc8

There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.

* tag 'v4.8-rc8': (1442 commits)
  Linux 4.8-rc8
  fault_in_multipages_readable() throws set-but-unused error
  mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
  radix tree: fix sibling entry handling in radix_tree_descend()
  radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
  fix memory leaks in tracing_buffers_splice_read()
  tracing: Move mutex to protect against resetting of seq data
  MIPS: Fix delay slot emulation count in debugfs
  MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
  mm: delete unnecessary and unsafe init_tlb_ubc()
  huge tmpfs: fix Committed_AS leak
  shmem: fix tmpfs to handle the huge= option properly
  blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
  MIPS: Fix pre-r6 emulation FPU initialisation
  arm64: kgdb: handle read-only text / modules
  arm64: Call numa_store_cpu_info() earlier.
  locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
  nvme-rdma: only clear queue flags after successful connect
  i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
  perf/core: Limit matching exclusive events to one PMU
  ...

.mailmap

@@ -88,6 +88,7 @@ Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
+Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
@@ -158,6 +159,8 @@ Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
+Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
+Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>

Documentation/ABI/stable/sysfs-devices

 # Note: This documents additional properties of any device beyond what
 # is documented in Documentation/sysfs-rules.txt
 
-What:		/sys/devices/*/of_path
+What:		/sys/devices/*/of_node
 Date:		February 2015
 Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
 Description:

Documentation/PCI/MSI-HOWTO.txt

@@ -94,14 +94,11 @@ has a requirements for a minimum number of vectors the driver can pass a
 min_vecs argument set to this limit, and the PCI core will return -ENOSPC
 if it can't meet the minimum number of vectors.
 
-The flags argument should normally be set to 0, but can be used to pass the
-PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support
-MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in
-case the device does not support legacy interrupt lines.
-
-By default this function will spread the interrupts around the available
-CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY
-flag.
+The flags argument is used to specify which type of interrupt can be used
+by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX).
+A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for
+any possible kind of interrupt.  If the PCI_IRQ_AFFINITY flag is set,
+pci_alloc_irq_vectors() will spread the interrupts around the available CPUs.
 
 To get the Linux IRQ numbers passed to request_irq() and free_irq() and the
 vectors, use the following function:
@@ -131,7 +128,7 @@ larger than the number supported by the device it will automatically be
 capped to the supported limit, so there is no need to query the number of
 vectors supported beforehand:
 
-	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0);
+	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_ALL_TYPES)
 	if (nvec < 0)
 		goto out_err;
 
@@ -140,7 +137,7 @@ interrupts it can request a particular number of interrupts by passing that
 number to pci_alloc_irq_vectors() function as both 'min_vecs' and
 'max_vecs' parameters:
 
-	ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0);
+	ret = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		goto out_err;
 
@@ -148,15 +145,14 @@ The most notorious example of the request type described above is enabling
 the single MSI mode for a device.  It could be done by passing two 1s as
 'min_vecs' and 'max_vecs':
 
-	ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		goto out_err;
 
 Some devices might not support using legacy line interrupts, in which case
-the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform
-can't provide MSI or MSI-X interrupts:
+the driver can specify that only MSI or MSI-X is acceptable:
 
-	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY);
+	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_MSI | PCI_IRQ_MSIX);
 	if (nvec < 0)
 		goto out_err;
 

Documentation/PCI/pci.txt

@@ -124,7 +124,6 @@ initialization with a pointer to a structure describing the driver
 
 The ID table is an array of struct pci_device_id entries ending with an
 all-zero entry.  Definitions with static const are generally preferred.
-Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided.
 
 Each entry consists of:
 

Documentation/arm/CCN.txt

@@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events"
 directory provides configuration templates for all documented
 events, that can be used with perf tool. For example "xp_valid_flit"
 is an equivalent of "type=0x8,event=0x4". Other parameters must be
-explicitly specified. For events originating from device, "node"
-defines its index. All crosspoint events require "xp" (index),
-"port" (device port number) and "vc" (virtual channel ID) and
-"dir" (direction). Watchpoints (special "event" value 0xfe) also
-require comparator values ("cmp_l" and "cmp_h") and "mask", being
-index of the comparator mask.
+explicitly specified.
 
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
 Masks are defined separately from the event description
 (due to limited number of the config values) in the "cmp_mask"
 directory, with first 8 configurable by user and additional

Documentation/arm64/silicon-errata.txt

@@ -53,6 +53,7 @@ stable kernels.
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075    |
 | ARM            | Cortex-A57      | #852523         | N/A                     |
 | ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220    |
+| ARM            | Cortex-A72      | #853709         | N/A                     |
 | ARM            | MMU-500         | #841119,#826419 | N/A                     |
 |                |                 |                 |                         |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |

Documentation/conf.py

@@ -131,7 +131,7 @@ pygments_style = 'sphinx'
 todo_include_todos = False
 
 primary_domain = 'C'
-highlight_language = 'C'
+highlight_language = 'guess'
 
 # -- Options for HTML output ----------------------------------------------
 

Documentation/cpu-freq/cpufreq-stats.txt

@@ -103,7 +103,7 @@ Config Main Menu
 	Power management options (ACPI, APM)  --->
 		CPU Frequency scaling  --->
 			[*] CPU Frequency scaling
-			<*>   CPU frequency translation statistics 
+			[*]   CPU frequency translation statistics
 			[*]     CPU frequency translation statistics details
 
 

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -16,6 +16,11 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
@@ -23,6 +28,8 @@ Example:
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};

Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt

@@ -13,6 +13,7 @@ Required properties:
 - touchscreen-size-y	  : See touchscreen.txt
 
 Optional properties:
+- firmware-name		  : File basename (string) for board specific firmware
 - touchscreen-inverted-x  : See touchscreen.txt
 - touchscreen-inverted-y  : See touchscreen.txt
 - touchscreen-swapped-x-y : See touchscreen.txt

Documentation/devicetree/bindings/mmc/sdhci-st.txt

@@ -10,7 +10,7 @@ Required properties:
 			subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
 			family).
 
-- clock-names:		Should be "mmc".
+- clock-names:		Should be "mmc" and "icn".  (NB: The latter is not compulsory)
 			See: Documentation/devicetree/bindings/resource-names.txt
 - clocks:		Phandle to the clock.
 			See: Documentation/devicetree/bindings/clock/clock-bindings.txt

Documentation/devicetree/bindings/serial/8250.txt

@@ -42,9 +42,6 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified GPIO instead of the peripheral
-  function pin for the UART feature. If unsure, don't specify this property.
 
 Note:
 * fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
 		interrupts = <10>;
 		reg-shift = <2>;
 	};
-
-Example for OMAP UART using GPIO-based modem control signals:
-
-	uart4: serial@49042000 {
-		compatible = "ti,omap3-uart";
-		reg = <0x49042000 0x400>;
-		interrupts = <80>;
-		ti,hwmods = "uart4";
-		clock-frequency = <48000000>;
-		cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	};

Documentation/devicetree/bindings/sound/omap-mcpdm.txt

@@ -8,8 +8,6 @@ Required properties:
 - interrupts: Interrupt number for McPDM
 - interrupt-parent: The parent interrupt controller
 - ti,hwmods: Name of the hwmod associated to the McPDM
-- clocks:  phandle for the pdmclk provider, likely <&twl6040>
-- clock-names: Must be "pdmclk"
 
 Example:
 
@@ -21,11 +19,3 @@ mcpdm: mcpdm@40132000 {
 	interrupt-parent = <&gic>;
 	ti,hwmods = "mcpdm";
 };
-
-In board DTS file the pdmclk needs to be added:
-
-&mcpdm {
-	clocks = <&twl6040>;
-	clock-names = "pdmclk";
-	status = "okay";
-};

Documentation/devicetree/bindings/thermal/thermal.txt

@@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below.
 Required properties:
 - #cooling-cells:	Used to provide cooling device specific information
   Type: unsigned	while referring to it. Must be at least 2, in order
-  Size: one cell      	to specify minimum and maximum cooling state used
+  Size: one cell	to specify minimum and maximum cooling state used
 			in the reference. The first cell is the minimum
 			cooling state requested and the second cell is
 			the maximum cooling state requested in the reference.
@@ -119,7 +119,7 @@ Required properties:
 Optional property:
 - contribution:		The cooling contribution to the thermal zone of the
   Type: unsigned	referred cooling device at the referred trip point.
-  Size: one cell      	The contribution is a ratio of the sum
+  Size: one cell	The contribution is a ratio of the sum
 			of all cooling contributions within a thermal zone.
 
 Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
@@ -145,7 +145,7 @@ Required properties:
   Size: one cell
 
 - thermal-sensors:	A list of thermal sensor phandles and sensor specifier
-  Type: list of 	used while monitoring the thermal zone.
+  Type: list of		used while monitoring the thermal zone.
   phandles + sensor
   specifier
 
@@ -473,7 +473,7 @@ thermal-zones {
 				  <&adc>;	/* pcb north */
 
 		/* hotspot = 100 * bandgap - 120 * adc + 484 */
-		coefficients = 		<100	-120	484>;
+		coefficients =		<100	-120	484>;
 
 		trips {
 			...
@@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then:
         thermal-sensors =  <&adc>;
 
 		/* hotspot = 1 * adc + 6000 */
-	coefficients = 		<1	6000>;
+	coefficients =		<1	6000>;
 
 (d) - Board thermal
 

Documentation/filesystems/overlayfs.txt

@@ -183,12 +183,10 @@ The copy_up operation essentially creates a new, identical file and
 moves it over to the old name.  The new file may be on a different
 filesystem, so both st_dev and st_ino of the file may change.
 
-Any open files referring to this inode will access the old data and
-metadata.  Similarly any file locks obtained before copy_up will not
-apply to the copied up file.
+Any open files referring to this inode will access the old data.
 
-On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
-fsetxattr(2) will fail with EROFS.
+Any file locks (and leases) obtained before copy_up will not apply
+to the copied up file.
 
 If a file with multiple hard links is copied up, then this will
 "break" the link.  Changes will not be propagated to other names

Documentation/hwmon/ftsteutates

@@ -19,5 +19,5 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
 implemented in this driver.
 
 Specification of the chip can be found here:
-ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
-ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf
+ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
+ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf

Documentation/i2c/slave-interface

@@ -145,6 +145,11 @@ If you want to add slave support to the bus driver:
 
 * Catch the slave interrupts and send appropriate i2c_slave_events to the backend.
 
+Note that most hardware supports being master _and_ slave on the same bus. So,
+if you extend a bus driver, please make sure that the driver supports that as
+well. In almost all cases, slave support does not need to disable the master
+functionality.
+
 Check the i2c-rcar driver as an example.
 
 

Documentation/kernel-documentation.rst

@@ -366,8 +366,6 @@ Domain`_ references.
 Cross-referencing from reStructuredText
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-.. highlight:: none
-
 To cross-reference the functions and types defined in the kernel-doc comments
 from reStructuredText documents, please use the `Sphinx C Domain`_
 references. For example::
@@ -390,8 +388,6 @@ For further details, please refer to the `Sphinx C Domain`_ documentation.
 Function documentation
 ----------------------
 
-.. highlight:: c
-
 The general format of a function and function-like macro kernel-doc comment is::
 
   /**
@@ -572,8 +568,6 @@ DocBook XML [DEPRECATED]
 Converting DocBook to Sphinx
 ----------------------------
 
-.. highlight:: none
-
 Over time, we expect all of the documents under ``Documentation/DocBook`` to be
 converted to Sphinx and reStructuredText. For most DocBook XML documents, a good
 enough solution is to use the simple ``Documentation/sphinx/tmplcvt`` script,

Documentation/kernel-parameters.txt

@@ -3032,6 +3032,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				PAGE_SIZE is used as alignment.
 				PCI-PCI bridge can be specified, if resource
 				windows need to be expanded.
+				To specify the alignment for several
+				instances of a device, the PCI vendor,
+				device, subvendor, and subdevice may be
+				specified, e.g., 4096@pci:8086:9c22:103c:198f
 		ecrc=		Enable/disable PCIe ECRC (transaction layer
 				end-to-end CRC checking).
 				bios: Use BIOS/firmware settings. This is the

Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst

@@ -144,7 +144,7 @@ logical address types are already defined will return with error ``EBUSY``.
 
        -  ``flags``
 
-       -  Flags. No flags are defined yet, so set this to 0.
+       -  Flags. See :ref:`cec-log-addrs-flags` for a list of available flags.
 
     -  .. row 7
 
@@ -201,6 +201,25 @@ logical address types are already defined will return with error ``EBUSY``.
           give the CEC framework more information about the device type, even
           though the framework won't use it directly in the CEC message.
 
+.. _cec-log-addrs-flags:
+
+.. flat-table:: Flags for struct cec_log_addrs
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+
+    -  .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`:
+
+       -  ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK``
+
+       -  1
+
+       -  By default if no logical address of the requested type can be claimed, then
+	  it will go back to the unconfigured state. If this flag is set, then it will
+	  fallback to the Unregistered logical address. Note that if the Unregistered
+	  logical address was explicitly requested, then this flag has no effect.
+
 .. _cec-versions:
 
 .. flat-table:: CEC Versions

Documentation/media/uapi/cec/cec-ioc-dqevent.rst

@@ -64,7 +64,8 @@ it is guaranteed that the state did change in between the two events.
 
        -  ``phys_addr``
 
-       -  The current physical address.
+       -  The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
+          valid physical address is set.
 
     -  .. row 2
 
@@ -72,7 +73,10 @@ it is guaranteed that the state did change in between the two events.
 
        -  ``log_addr_mask``
 
-       -  The current set of claimed logical addresses.
+       -  The current set of claimed logical addresses. This is 0 if no logical
+          addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
+	  If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
+	  has the unregistered logical address. In that case all other bits are 0.
 
 
 

Documentation/networking/dsa/dsa.txt

@@ -587,26 +587,6 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device.
 TODO
 ====
 
-The platform device problem
----------------------------
-DSA is currently implemented as a platform device driver which is far from ideal
-as was discussed in this thread:
-
-http://permalink.gmane.org/gmane.linux.network/329848
-
-This basically prevents the device driver model to be properly used and applied,
-and support non-MDIO, non-MMIO Ethernet connected switches.
-
-Another problem with the platform device driver approach is that it prevents the
-use of a modular switch drivers build due to a circular dependency, illustrated
-here:
-
-http://comments.gmane.org/gmane.linux.network/345803
-
-Attempts of reworking this has been done here:
-
-https://lwn.net/Articles/643149/
-
 Making SWITCHDEV and DSA converge towards an unified codebase
 -------------------------------------------------------------
 

Documentation/networking/rxrpc.txt

@@ -790,13 +790,12 @@ The kernel interface functions are as follows:
      Data messages can have their contents extracted with the usual bunch of
      socket buffer manipulation functions.  A data message can be determined to
      be the last one in a sequence with rxrpc_kernel_is_data_last().  When a
-     data message has been used up, rxrpc_kernel_data_delivered() should be
-     called on it..
+     data message has been used up, rxrpc_kernel_data_consumed() should be
+     called on it.
 
-     Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose
-     of.  It is possible to get extra refs on all types of message for later
-     freeing, but this may pin the state of a call until the message is finally
-     freed.
+     Messages should be handled to rxrpc_kernel_free_skb() to dispose of.  It
+     is possible to get extra refs on all types of message for later freeing,
+     but this may pin the state of a call until the message is finally freed.
 
  (*) Accept an incoming call.
 
@@ -821,12 +820,14 @@ The kernel interface functions are as follows:
      Other errors may be returned if the call had been aborted (-ECONNABORTED)
      or had timed out (-ETIME).
 
- (*) Record the delivery of a data message and free it.
+ (*) Record the delivery of a data message.
 
-	void rxrpc_kernel_data_delivered(struct sk_buff *skb);
+	void rxrpc_kernel_data_consumed(struct rxrpc_call *call,
+					struct sk_buff *skb);
 
-     This is used to record a data message as having been delivered and to
-     update the ACK state for the call.  The socket buffer will be freed.
+     This is used to record a data message as having been consumed and to
+     update the ACK state for the call.  The message must still be passed to
+     rxrpc_kernel_free_skb() for disposal by the caller.
 
  (*) Free a message.
 

Documentation/power/basic-pm-debugging.txt

@@ -164,7 +164,32 @@ load n/2 modules more and try again.
 Again, if you find the offending module(s), it(they) must be unloaded every time
 before hibernation, and please report the problem with it(them).
 
-c) Advanced debugging
+c) Using the "test_resume" hibernation option
+
+/sys/power/disk generally tells the kernel what to do after creating a
+hibernation image.  One of the available options is "test_resume" which
+causes the just created image to be used for immediate restoration.  Namely,
+after doing:
+
+# echo test_resume > /sys/power/disk
+# echo disk > /sys/power/state
+
+a hibernation image will be created and a resume from it will be triggered
+immediately without involving the platform firmware in any way.
+
+That test can be used to check if failures to resume from hibernation are
+related to bad interactions with the platform firmware.  That is, if the above
+works every time, but resume from actual hibernation does not work or is
+unreliable, the platform firmware may be responsible for the failures.
+
+On architectures and platforms that support using different kernels to restore
+hibernation images (that is, the kernel used to read the image from storage and
+load it into memory is different from the one included in the image) or support
+kernel address space randomization, it also can be used to check if failures
+to resume may be related to the differences between the restore and image
+kernels.
+
+d) Advanced debugging
 
 In case that hibernation does not work on your system even in the minimal
 configuration and compiling more drivers as modules is not practical or some

Documentation/power/interface.txt

-Power Management Interface
-
-
-The power management subsystem provides a unified sysfs interface to 
-userspace, regardless of what architecture or platform one is
-running. The interface exists in /sys/power/ directory (assuming sysfs
-is mounted at /sys). 
-
-/sys/power/state controls system power state. Reading from this file
-returns what states are supported, which is hard-coded to 'freeze',
-'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk'
-(Suspend-to-Disk). 
-
-Writing to this file one of those strings causes the system to
-transition into that state. Please see the file
-Documentation/power/states.txt for a description of each of those
-states.
-
-
-/sys/power/disk controls the operating mode of the suspend-to-disk
-mechanism. Suspend-to-disk can be handled in several ways. We have a
-few options for putting the system to sleep - using the platform driver
-(e.g. ACPI or other suspend_ops), powering off the system or rebooting the
-system (for testing).
-
-Additionally, /sys/power/disk can be used to turn on one of the two testing
-modes of the suspend-to-disk mechanism: 'testproc' or 'test'.  If the
-suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to
-/sys/power/state will cause the kernel to disable nonboot CPUs and freeze
-tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs.  If it is
-in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel
-to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait
-for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs.  Then,
-we are able to look in the log messages and work out, for example, which code
-is being slow and which device drivers are misbehaving.
-
-Reading from this file will display all supported modes and the currently
-selected one in brackets, for example
-
-	[shutdown] reboot test testproc
-
-Writing to this file will accept one of
-
-       'platform' (only if the platform supports it)
-       'shutdown'
-       'reboot'
-       'testproc'
-       'test'
-
-/sys/power/image_size controls the size of the image created by
-the suspend-to-disk mechanism.  It can be written a string
-representing a non-negative integer that will be used as an upper
-limit of the image size, in bytes.  The suspend-to-disk mechanism will
-do its best to ensure the image size will not exceed that number.  However,
-if this turns out to be impossible, it will try to suspend anyway using the
-smallest image possible.  In particular, if "0" is written to this file, the
-suspend image will be as small as possible.
-
-Reading from this file will display the current image size limit, which
-is set to 2/5 of available RAM by default.
-
-/sys/power/pm_trace controls the code which saves the last PM event point in
-the RTC across reboots, so that you can debug a machine that just hangs
-during suspend (or more commonly, during resume).  Namely, the RTC is only
-used to save the last PM event point if this file contains '1'.  Initially it
-contains '0' which may be changed to '1' by writing a string representing a
-nonzero integer into it.
-
-To use this debugging feature you should attempt to suspend the machine, then
-reboot it and run
-
-	dmesg -s 1000000 | grep 'hash matches'
-
-CAUTION: Using it will cause your machine's real-time (CMOS) clock to be
-set to a random invalid time after a resume.
+Power Management Interface for System Sleep
+
+Copyright (c) 2016 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+The power management subsystem provides userspace with a unified sysfs interface
+for system sleep regardless of the underlying system architecture or platform.
+The interface is located in the /sys/power/ directory (assuming that sysfs is
+mounted at /sys).
+
+/sys/power/state is the system sleep state control file.
+
+Reading from it returns a list of supported sleep states, encoded as:
+
+'freeze' (Suspend-to-Idle)
+'standby' (Power-On Suspend)
+'mem' (Suspend-to-RAM)
+'disk' (Suspend-to-Disk)
+
+Suspend-to-Idle is always supported.  Suspend-to-Disk is always supported
+too as long the kernel has been configured to support hibernation at all
+(ie. CONFIG_HIBERNATION is set in the kernel configuration file).  Support
+for Suspend-to-RAM and Power-On Suspend depends on the capabilities of the
+platform.
+
+If one of the strings listed in /sys/power/state is written to it, the system
+will attempt to transition into the corresponding sleep state.  Refer to
+Documentation/power/states.txt for a description of each of those states.
+
+/sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk).
+Specifically, it tells the kernel what to do after creating a hibernation image.
+
+Reading from it returns a list of supported options encoded as:
+
+'platform' (put the system into sleep using a platform-provided method)
+'shutdown' (shut the system down)
+'reboot' (reboot the system)
+'suspend' (trigger a Suspend-to-RAM transition)
+'test_resume' (resume-after-hibernation test mode)
+
+The currently selected option is printed in square brackets.
+
+The 'platform' option is only available if the platform provides a special
+mechanism to put the system to sleep after creating a hibernation image (ACPI
+does that, for example).  The 'suspend' option is available if Suspend-to-RAM
+is supported.  Refer to Documentation/power/basic_pm_debugging.txt for the
+description of the 'test_resume' option.
+
+To select an option, write the string representing it to /sys/power/disk.
+
+/sys/power/image_size controls the size of hibernation images.
+
+It can be written a string representing a non-negative integer that will be
+used as a best-effort upper limit of the image size, in bytes.  The hibernation
+core will do its best to ensure that the image size will not exceed that number.
+However, if that turns out to be impossible to achieve, a hibernation image will
+still be created and its size will be as small as possible.  In particular,
+writing '0' to this file will enforce hibernation images to be as small as
+possible.
+
+Reading from this file returns the current image size limit, which is set to
+around 2/5 of available RAM by default.
+
+/sys/power/pm_trace controls the PM trace mechanism saving the last suspend
+or resume event point in the RTC across reboots.
+
+It helps to debug hard lockups or reboots due to device driver failures that
+occur during system suspend or resume (which is more common) more effectively.
+
+If /sys/power/pm_trace contains '1', the fingerprint of each suspend/resume
+event point in turn will be stored in the RTC memory (overwriting the actual
+RTC information), so it will survive a system crash if one occurs right after
+storing it and it can be used later to identify the driver that caused the crash
+to happen (see Documentation/power/s2ram.txt for more information).
+
+Initially it contains '0' which may be changed to '1' by writing a string
+representing a nonzero integer into it.

Documentation/powerpc/transactional_memory.txt

@@ -167,6 +167,8 @@ signal will be rolled back anyway.
 For signals taken in non-TM or suspended mode, we use the
 normal/non-checkpointed stack pointer.
 
+Any transaction initiated inside a sighandler and suspended on return
+from the sighandler to the kernel will get reclaimed and discarded.
 
 Failure cause codes used by kernel
 ==================================

Documentation/rapidio/mport_cdev.txt

@@ -80,6 +80,10 @@ functionality of their platform when planning to use this driver:
 
 III. Module parameters
 
+- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
+        This parameter set a maximum completion wait time for SYNC mode DMA
+        transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
+
 - 'dbg_level' - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional blocks.

Documentation/sphinx-static/theme_overrides.css

@@ -42,11 +42,12 @@
     caption a.headerlink { opacity: 0; }
     caption a.headerlink:hover { opacity: 1; }
 
-    /* inline literal: drop the borderbox and red color */
+    /* inline literal: drop the borderbox, padding and red color */
 
     code, .rst-content tt, .rst-content code {
         color: inherit;
         border: none;
+        padding: unset;
         background: inherit;
         font-size: 85%;
     }

MAINTAINERS

@@ -798,6 +798,7 @@ M:	Laura Abbott <labbott@redhat.com>
 M:	Sumit Semwal <sumit.semwal@linaro.org>
 L:	devel@driverdev.osuosl.org
 S:	Supported
+F:	Documentation/devicetree/bindings/staging/ion/
 F:	drivers/staging/android/ion
 F:	drivers/staging/android/uapi/ion.h
 F:	drivers/staging/android/uapi/ion_test.h
@@ -881,6 +882,15 @@ S:	Supported
 F:	drivers/gpu/drm/arc/
 F:	Documentation/devicetree/bindings/display/snps,arcpgu.txt
 
+ARM ARCHITECTED TIMER DRIVER
+M:	Mark Rutland <mark.rutland@arm.com>
+M:	Marc Zyngier <marc.zyngier@arm.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/include/asm/arch_timer.h
+F:	arch/arm64/include/asm/arch_timer.h
+F:	drivers/clocksource/arm_arch_timer.c
+
 ARM HDLCD DRM DRIVER
 M:	Liviu Dudau <liviu.dudau@arm.com>
 S:	Supported
@@ -1614,7 +1624,8 @@ N:	rockchip
 
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+R:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
@@ -1634,7 +1645,6 @@ F:	drivers/*/*s3c64xx*
 F:	drivers/*/*s5pv210*
 F:	drivers/memory/samsung/*
 F:	drivers/soc/samsung/*
-F:	drivers/spi/spi-s3c*
 F:	Documentation/arm/Samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
 F:	Documentation/devicetree/bindings/sram/samsung-sram.txt
@@ -1822,6 +1832,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 ARM/UNIPHIER ARCHITECTURE
 M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
 S:	Maintained
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
@@ -2475,7 +2486,7 @@ F:	include/net/bluetooth/
 BONDING DRIVER
 M:	Jay Vosburgh <j.vosburgh@gmail.com>
 M:	Veaceslav Falico <vfalico@gmail.com>
-M:	Andy Gospodarek <gospo@cumulusnetworks.com>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -2490,7 +2501,7 @@ S:	Supported
 F:	kernel/bpf/
 
 BROADCOM B44 10/100 ETHERNET DRIVER
-M:	Gary Zambrano <zambrano@broadcom.com>
+M:	Michael Chan <michael.chan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/b44.*
@@ -3238,7 +3249,7 @@ F:	kernel/cpuset.c
 CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
 M:	Johannes Weiner <hannes@cmpxchg.org>
 M:	Michal Hocko <mhocko@kernel.org>
-M:	Vladimir Davydov <vdavydov@virtuozzo.com>
+M:	Vladimir Davydov <vdavydov.dev@gmail.com>
 L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -3259,7 +3270,7 @@ S:	Maintained
 F:	drivers/net/wan/cosa*
 
 CPMAC ETHERNET DRIVER
-M:	Florian Fainelli <florian@openwrt.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
@@ -4533,6 +4544,12 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/sb_edac.c
 
+EDAC-SKYLAKE
+M:	Tony Luck <tony.luck@intel.com>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/skx_edac.c
+
 EDAC-XGENE
 APPLIED MICRO (APM) X-GENE SOC EDAC
 M:     Loc Ho <lho@apm.com>
@@ -6094,7 +6111,7 @@ S:	Supported
 F:	drivers/cpufreq/intel_pstate.c
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-M:	Maik Broemme <mbroemme@plusserver.de>
+M:	Maik Broemme <mbroemme@libmpq.org>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
@@ -7457,7 +7474,8 @@ F:	Documentation/devicetree/bindings/sound/max9860.txt
 F:	sound/soc/codecs/max9860.*
 
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	drivers/power/max14577_charger.c
@@ -7473,7 +7491,8 @@ F:	include/dt-bindings/*/*max77802.h
 
 MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
 M:	Chanwoo Choi <cw00.choi@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/*/max14577*.c
@@ -7663,7 +7682,7 @@ L:	linux-rdma@vger.kernel.org
 S:	Supported
 W:	https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-F:	drivers/infiniband/hw/rxe/
+F:	drivers/infiniband/sw/rxe/
 F:	include/uapi/rdma/rdma_user_rxe.h
 
 MEMBARRIER SUPPORT
@@ -8150,6 +8169,15 @@ S:	Maintained
 W:	https://fedorahosted.org/dropwatch/
 F:	net/core/drop_monitor.c
 
+NETWORKING [DSA]
+M:	Andrew Lunn <andrew@lunn.ch>
+M:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+M:	Florian Fainelli <f.fainelli@gmail.com>
+S:	Maintained
+F:	net/dsa/
+F:	include/net/dsa.h
+F:	drivers/net/dsa/
+
 NETWORKING [GENERAL]
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
@@ -9239,7 +9267,7 @@ F:	drivers/pinctrl/sh-pfc/
 
 PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <tomasz.figa@gmail.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -10172,7 +10200,7 @@ S:	Maintained
 F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -10187,7 +10215,8 @@ F:	drivers/video/fbdev/s3c-fb.c
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
 M:	Sangbeom Kim <sbkim73@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported
@@ -10246,6 +10275,17 @@ S:	Supported
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 F:	drivers/clk/samsung/
 
+SAMSUNG SPI DRIVERS
+M:	Kukjin Kim <kgene@kernel.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Andi Shyti <andi.shyti@samsung.com>
+L:	linux-spi@vger.kernel.org
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/spi-samsung.txt
+F:	drivers/spi/spi-s3c*
+F:	include/linux/platform_data/spi-s3c64xx.h
+
 SAMSUNG SXGBE DRIVERS
 M:	Byungho An <bh74.an@samsung.com>
 M:	Girish K S <ks.giri@samsung.com>
@@ -11225,12 +11265,8 @@ S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
 STAGING - WILC1000 WIFI DRIVER
-M:	Johnny Kim <johnny.kim@atmel.com>
-M:	Austin Shin <austin.shin@atmel.com>
-M:	Chris Park <chris.park@atmel.com>
-M:	Tony Cho <tony.cho@atmel.com>
-M:	Glen Lee <glen.lee@atmel.com>
-M:	Leo Kim <leo.kim@atmel.com>
+M:	Aditya Shankar <aditya.shankar@microchip.com>
+M:	Ganesh Krishna <ganesh.krishna@microchip.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/staging/wilc1000/
@@ -12550,7 +12586,7 @@ F:	include/linux/if_*vlan.h
 F:	net/8021q/
 
 VLYNQ BUS
-M:	Florian Fainelli <florian@openwrt.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)
 S:	Maintained
 F:	drivers/vlynq/vlynq.c

Makefile

 VERSION = 4
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc8
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -336,17 +336,6 @@ config HAVE_ARCH_SECCOMP_FILTER
 	    results in the system call being skipped immediately.
 	  - seccomp syscall wired up
 
-	  For best performance, an arch should use seccomp_phase1 and
-	  seccomp_phase2 directly.  It should call seccomp_phase1 for all
-	  syscalls if TIF_SECCOMP is set, but seccomp_phase1 does not
-	  need to be called from a ptrace-safe context.  It must then
-	  call seccomp_phase2 if seccomp_phase1 returns anything other
-	  than SECCOMP_PHASE1_OK or SECCOMP_PHASE1_SKIP.
-
-	  As an additional optimization, an arch may provide seccomp_data
-	  directly to seccomp_phase1; this avoids multiple calls
-	  to the syscall_xyz helpers for every syscall.
-
 config SECCOMP_FILTER
 	def_bool y
 	depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET

arch/alpha/include/asm/uaccess.h

@@ -371,14 +371,6 @@ __copy_tofrom_user_nocheck(void *to, const void *from, long len)
 	return __cu_len;
 }
 
-extern inline long
-__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
-{
-	if (__access_ok((unsigned long)validate, len, get_fs()))
-		len = __copy_tofrom_user_nocheck(to, from, len);
-	return len;
-}
-
 #define __copy_to_user(to, from, n)					\
 ({									\
 	__chk_user_ptr(to);						\
@@ -393,17 +385,22 @@ __copy_tofrom_user(void *to, const void *from, long len, const void __user *vali
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-
 extern inline long
 copy_to_user(void __user *to, const void *from, long n)
 {
-	return __copy_tofrom_user((__force void *)to, from, n, to);
+	if (likely(__access_ok((unsigned long)to, n, get_fs())))
+		n = __copy_tofrom_user_nocheck((__force void *)to, from, n);
+	return n;
 }
 
 extern inline long
 copy_from_user(void *to, const void __user *from, long n)
 {
-	return __copy_tofrom_user(to, (__force void *)from, n, from);
+	if (likely(__access_ok((unsigned long)from, n, get_fs())))
+		n = __copy_tofrom_user_nocheck(to, (__force void *)from, n);
+	else
+		memset(to, 0, n);
+	return n;
 }
 
 extern void __do_clear_user(void);

arch/arc/include/asm/entry.h

@@ -142,7 +142,7 @@
 
 #ifdef CONFIG_ARC_CURR_IN_REG
 	; Retrieve orig r25 and save it with rest of callee_regs
-	ld.as   r12, [r12, PT_user_r25]
+	ld	r12, [r12, PT_user_r25]
 	PUSH	r12
 #else
 	PUSH	r25
@@ -198,7 +198,7 @@
 
 	; SP is back to start of pt_regs
 #ifdef CONFIG_ARC_CURR_IN_REG
-	st.as   r12, [sp, PT_user_r25]
+	st	r12, [sp, PT_user_r25]
 #endif
 .endm
 

arch/arc/include/asm/irqflags-compact.h

@@ -188,10 +188,10 @@ static inline int arch_irqs_disabled(void)
 .endm
 
 .macro IRQ_ENABLE  scratch
+	TRACE_ASM_IRQ_ENABLE
 	lr	\scratch, [status32]
 	or	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
 	flag	\scratch
-	TRACE_ASM_IRQ_ENABLE
 .endm
 
 #endif	/* __ASSEMBLY__ */

arch/arc/include/asm/pgtable.h

@@ -280,7 +280,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pfn_pte(pfn, prot)	(__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
 
 /* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)

arch/arc/include/asm/uaccess.h

@@ -83,7 +83,10 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\
@@ -101,7 +104,11 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
+	"	mov %R1, 0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\

arch/arc/include/uapi/asm/elf.h

@@ -13,8 +13,15 @@
 
 /* Machine specific ELF Hdr flags */
 #define EF_ARC_OSABI_MSK	0x00000f00
-#define EF_ARC_OSABI_ORIG	0x00000000   /* MUST be zero for back-compat */
-#define EF_ARC_OSABI_CURRENT	0x00000300   /* v3 (no legacy syscalls) */
+
+#define EF_ARC_OSABI_V3		0x00000300   /* v3 (no legacy syscalls) */
+#define EF_ARC_OSABI_V4		0x00000400   /* v4 (64bit data any reg align) */
+
+#if __GNUC__ < 6
+#define EF_ARC_OSABI_CURRENT	EF_ARC_OSABI_V3
+#else
+#define EF_ARC_OSABI_CURRENT	EF_ARC_OSABI_V4
+#endif
 
 typedef unsigned long elf_greg_t;
 typedef unsigned long elf_fpregset_t;

arch/arc/kernel/arcksyms.c

@@ -28,6 +28,7 @@ extern void __muldf3(void);
 extern void __divdf3(void);
 extern void __floatunsidf(void);
 extern void __floatunsisf(void);
+extern void __udivdi3(void);
 
 EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__ashrdi3);
@@ -45,6 +46,7 @@ EXPORT_SYMBOL(__muldf3);
 EXPORT_SYMBOL(__divdf3);
 EXPORT_SYMBOL(__floatunsidf);
 EXPORT_SYMBOL(__floatunsisf);
+EXPORT_SYMBOL(__udivdi3);
 
 /* ARC optimised assembler routines */
 EXPORT_SYMBOL(memset);

arch/arc/kernel/process.c

@@ -199,7 +199,7 @@ int elf_check_arch(const struct elf32_hdr *x)
 	}
 
 	eflags = x->e_flags;
-	if ((eflags & EF_ARC_OSABI_MSK) < EF_ARC_OSABI_CURRENT) {
+	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
 		pr_err("ABI mismatch - you need newer toolchain\n");
 		force_sigsegv(SIGSEGV, current);
 		return 0;

arch/arc/kernel/setup.c

@@ -291,8 +291,10 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 			       cpu->dccm.base_addr, TO_KB(cpu->dccm.sz),
 			       cpu->iccm.base_addr, TO_KB(cpu->iccm.sz));
 
-	n += scnprintf(buf + n, len - n,
-		       "OS ABI [v3]\t: no-legacy-syscalls\n");
+	n += scnprintf(buf + n, len - n, "OS ABI [v%d]\t: %s\n",
+			EF_ARC_OSABI_CURRENT >> 8,
+			EF_ARC_OSABI_CURRENT == EF_ARC_OSABI_V3 ?
+			"no-legacy-syscalls" : "64-bit data any register aligned");
 
 	return buf;
 }

arch/arc/mm/cache.c

@@ -921,6 +921,15 @@ void arc_cache_init(void)
 
 	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
 
+	/*
+	 * Only master CPU needs to execute rest of function:
+	 *  - Assume SMP so all cores will have same cache config so
+	 *    any geomtry checks will be same for all
+	 *  - IOC setup / dma callbacks only need to be setup once
+	 */
+	if (cpu)
+		return;
+
 	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
 		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
 

arch/arc/mm/highmem.c

@@ -61,6 +61,7 @@ void *kmap(struct page *page)
 
 	return kmap_high(page);
 }
+EXPORT_SYMBOL(kmap);
 
 void *kmap_atomic(struct page *page)
 {

arch/arm/boot/dts/am335x-baltos.dtsi

@@ -226,7 +226,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 	};
 };
 

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -161,7 +161,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {

arch/arm/boot/dts/am335x-phycore-som.dtsi

@@ -197,7 +197,7 @@
 		gpmc,wr-access-ns = <30>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/armada-388-clearfog.dts

@@ -390,12 +390,12 @@
 
 			port@0 {
 				reg = <0>;
-				label = "lan1";
+				label = "lan5";
 			};
 
 			port@1 {
 				reg = <1>;
-				label = "lan2";
+				label = "lan4";
 			};
 
 			port@2 {
@@ -405,12 +405,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "lan4";
+				label = "lan2";
 			};
 
 			port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan1";
 			};
 
 			port@5 {

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -2,6 +2,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
 

arch/arm/boot/dts/bcm283x.dtsi

@@ -2,7 +2,6 @@
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 /* This include file covers the common peripherals and configuration between
  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
@@ -13,6 +12,8 @@
 	compatible = "brcm,bcm2835";
 	model = "BCM2835";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	chosen {
 		bootargs = "earlyprintk console=ttyAMA0";

arch/arm/boot/dts/exynos5410-odroidxu.dts

@@ -447,14 +447,11 @@
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
 };

arch/arm/boot/dts/imx6qdl.dtsi

@@ -243,7 +243,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",

arch/arm/boot/dts/imx6sx-sabreauto.dts

@@ -64,7 +64,7 @@
 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakup;
+	wakeup-source;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx7d-sdb.dts

@@ -131,7 +131,7 @@
 		ti,y-min = /bits/ 16 <0>;
 		ti,y-max = /bits/ 16 <0>;
 		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plat-ohms = /bits/ 16 <400>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
 		wakeup-source;
 	};
 };

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {

arch/arm/boot/dts/kirkwood-openrd.dtsi

@@ -116,6 +116,10 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -35,10 +35,15 @@
 	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
@@ -54,10 +59,6 @@
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		gpmc,device-width = <2>;
-
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-
 		#address-cells = <1>;
 		#size-cells = <1>;
 

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -46,6 +46,7 @@
 		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;

arch/arm/boot/dts/omap3-overo-base.dtsi

@@ -223,7 +223,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";

arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi

@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/omap3-overo-tobi-common.dtsi

@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi

@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/rk3066a.dtsi

@@ -197,6 +197,8 @@
 		clock-names = "saradc", "apb_pclk";
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3288.dtsi

@@ -279,6 +279,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3xxx.dtsi

@@ -399,6 +399,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/stih407-family.dtsi

@@ -550,8 +550,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
 			non-removable;
 		};
@@ -565,8 +566,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};

arch/arm/boot/dts/stih410.dtsi

@@ -41,7 +41,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -57,7 +58,8 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -71,7 +73,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -87,7 +90,8 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -84,7 +84,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -897,7 +897,7 @@
 		palmas: tps65913@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra114-roth.dts

@@ -802,7 +802,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra114-tn7.dts

@@ -63,7 +63,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -1382,7 +1382,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@0,70006000 {
+	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1394,7 +1394,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@0,70006040 {
+	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};

arch/arm/common/locomo.c

@@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = {
 
 static void locomo_handler(struct irq_desc *desc)
 {
-	struct locomo *lchip = irq_desc_get_chip_data(desc);
+	struct locomo *lchip = irq_desc_get_handler_data(desc);
 	int req, i;
 
 	/* Acknowledge the parent IRQ */
@@ -200,8 +200,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	irq_set_chip_data(lchip->irq, lchip);
-	irq_set_chained_handler(lchip->irq, locomo_handler);
+	irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip);
 
 	/* Install handlers for IRQ_LOCOMO_* */
 	for ( ; irq <= lchip->irq_base + 3; irq++) {

arch/arm/common/sa1111.c

@@ -472,8 +472,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
 	 */
 	sa1111_writel(0, irqbase + SA1111_INTPOL0);
-	sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
-		      SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
+	sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) |
+		      BIT(IRQ_S1_READY_NINT & 31),
 		      irqbase + SA1111_INTPOL1);
 
 	/* clear all IRQs */
@@ -754,7 +754,7 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (sachip->irq != NO_IRQ) {
 		ret = sa1111_setup_irq(sachip, pd->irq_base);
 		if (ret)
-			goto err_unmap;
+			goto err_clk;
 	}
 
 #ifdef CONFIG_ARCH_SA1100
@@ -799,6 +799,8 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 
 	return 0;
 
+ err_clk:
+	clk_disable(sachip->clk);
  err_unmap:
 	iounmap(sachip->base);
  err_clk_unprep:
@@ -869,9 +871,9 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
+static int sa1111_suspend_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
@@ -934,9 +936,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct platform_device *dev)
+static int sa1111_resume_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
@@ -952,7 +954,7 @@ static int sa1111_resume(struct platform_device *dev)
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
-		platform_set_drvdata(dev, NULL);
+		dev_set_drvdata(dev, NULL);
 		kfree(save);
 		return 0;
 	}
@@ -1003,8 +1005,8 @@ static int sa1111_resume(struct platform_device *dev)
 }
 
 #else
-#define sa1111_suspend NULL
-#define sa1111_resume  NULL
+#define sa1111_suspend_noirq NULL
+#define sa1111_resume_noirq  NULL
 #endif
 
 static int sa1111_probe(struct platform_device *pdev)
@@ -1017,7 +1019,7 @@ static int sa1111_probe(struct platform_device *pdev)
 		return -EINVAL;
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		return -ENXIO;
+		return irq;
 
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }
@@ -1038,6 +1040,11 @@ static int sa1111_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops sa1111_pm_ops = {
+	.suspend_noirq = sa1111_suspend_noirq,
+	.resume_noirq = sa1111_resume_noirq,
+};
+
 /*
  *	Not sure if this should be on the system bus or not yet.
  *	We really want some way to register a system device at
@@ -1050,10 +1057,9 @@ static int sa1111_remove(struct platform_device *pdev)
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
 	.remove		= sa1111_remove,
-	.suspend	= sa1111_suspend,
-	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.pm	= &sa1111_pm_ops,
 	},
 };
 

arch/arm/configs/keystone_defconfig

@@ -161,6 +161,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y

arch/arm/configs/multi_v7_defconfig

@@ -781,7 +781,7 @@ CONFIG_MXS_DMA=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_OMAP=y
 CONFIG_QCOM_BAM_DMA=y
-CONFIG_XILINX_VDMA=y
+CONFIG_XILINX_DMA=y
 CONFIG_DMA_SUN6I=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y

arch/arm/crypto/aes-ce-glue.c

@@ -284,7 +284,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];

arch/arm/include/asm/pgtable-2level-hwdef.h

@@ -47,6 +47,7 @@
 #define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
 #define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_CACHE_MASK	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
 
 /*

arch/arm/include/asm/pgtable-3level-hwdef.h

@@ -62,6 +62,7 @@
 #define PMD_SECT_WT		(_AT(pmdval_t, 2) << 2)	/* normal inner write-through */
 #define PMD_SECT_WB		(_AT(pmdval_t, 3) << 2)	/* normal inner write-back */
 #define PMD_SECT_WBWA		(_AT(pmdval_t, 7) << 2)	/* normal inner write-alloc */
+#define PMD_SECT_CACHE_MASK	(_AT(pmdval_t, 7) << 2)
 
 /*
  * + Level 3 descriptor (PTE)

arch/arm/kernel/entry-armv.S

@@ -295,6 +295,7 @@ __und_svc_fault:
 	bl	__und_fault
 
 __und_svc_finish:
+	get_thread_info tsk
 	ldr	r5, [sp, #S_PSR]		@ Get SVC cpsr
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)

arch/arm/kernel/hyp-stub.S

@@ -142,6 +142,19 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	and	r7, #0x1f		@ Preserve HPMN
 	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
 
+	@ Make sure NS-SVC is initialised appropriately
+	mrc	p15, 0, r7, c1, c0, 0	@ SCTLR
+	orr	r7, #(1 << 5)		@ CP15 barriers enabled
+	bic	r7, #(3 << 7)		@ Clear SED/ITD for v8 (RES0 for v7)
+	bic	r7, #(3 << 19)		@ WXN and UWXN disabled
+	mcr	p15, 0, r7, c1, c0, 0	@ SCTLR
+
+	mrc	p15, 0, r7, c0, c0, 0	@ MIDR
+	mcr	p15, 4, r7, c0, c0, 0	@ VPIDR
+
+	mrc	p15, 0, r7, c0, c0, 5	@ MPIDR
+	mcr	p15, 4, r7, c0, c0, 5	@ VMPIDR
+
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1

arch/arm/kvm/arm.c

@@ -158,8 +158,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	int i;
 
-	kvm_free_stage2_pgd(kvm);
-
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);

arch/arm/kvm/mmu.c

@@ -1309,7 +1309,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	smp_rmb();
 
 	pfn = gfn_to_pfn_prot(kvm, gfn, write_fault, &writable);
-	if (is_error_pfn(pfn))
+	if (is_error_noslot_pfn(pfn))
 		return -EFAULT;
 
 	if (kvm_is_device_pfn(pfn)) {
@@ -1714,7 +1714,8 @@ int kvm_mmu_init(void)
 		 kern_hyp_va(PAGE_OFFSET), kern_hyp_va(~0UL));
 
 	if (hyp_idmap_start >= kern_hyp_va(PAGE_OFFSET) &&
-	    hyp_idmap_start <  kern_hyp_va(~0UL)) {
+	    hyp_idmap_start <  kern_hyp_va(~0UL) &&
+	    hyp_idmap_start != (unsigned long)__hyp_idmap_text_start) {
 		/*
 		 * The idmap page is intersecting with the VA space,
 		 * it is not safe to continue further.
@@ -1893,6 +1894,7 @@ void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots)
 
 void kvm_arch_flush_shadow_all(struct kvm *kvm)
 {
+	kvm_free_stage2_pgd(kvm);
 }
 
 void kvm_arch_flush_shadow_memslot(struct kvm *kvm,

arch/arm/mach-exynos/suspend.c

@@ -255,6 +255,12 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 		return -ENOMEM;
 	}
 
+	/*
+	 * Clear the OF_POPULATED flag set in of_irq_init so that
+	 * later the Exynos PMU platform device won't be skipped.
+	 */
+	of_node_clear_flag(node, OF_POPULATED);
+
 	return 0;
 }
 

arch/arm/mach-imx/gpc.c

@@ -271,6 +271,12 @@ static int __init imx_gpc_init(struct device_node *node,
 	for (i = 0; i < IMR_NUM; i++)
 		writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
 
+	/*
+	 * Clear the OF_POPULATED flag set in of_irq_init so that
+	 * later the GPC power domain driver will not be skipped.
+	 */
+	of_node_clear_flag(node, OF_POPULATED);
+
 	return 0;
 }
 IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);

arch/arm/mach-imx/mach-imx6ul.c

@@ -64,6 +64,7 @@ static void __init imx6ul_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
+	of_platform_default_populate(NULL, NULL, parent);
 	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();

arch/arm/mach-imx/pm-imx6.c

@@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val &= ~BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;

arch/arm/mach-omap2/cm33xx.c

@@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);

arch/arm/mach-omap2/cminst44xx.c

@@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
 			  MAX_MODULE_DISABLE_TIME, i);

arch/arm/mach-omap2/omap_hwmod.c

@@ -1053,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
 					oh->clkdm->cm_inst,
 					oh->prcm.omap4.clkctrl_offs, 0);
@@ -2971,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 	if (!_find_mpu_rt_port(oh))
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	/* XXX check module SIDLEMODE, hardreset status */
 
 	return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,

arch/arm/mach-omap2/omap_hwmod.h

@@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm {
  * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
  *     module-level context loss register associated with them; this
  *     flag bit should be set in those cases
+ * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
+ *	offset of zero; this flag bit should be set in those cases to
+ *	distinguish from hwmods that have no clkctrl offset.
  */
 #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
+#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET		(1 << 1)
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -29,6 +29,7 @@
 #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
 #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
 #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
 
 /*
  * 'l3' class
@@ -1296,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -722,8 +722,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
  * display serial interface controller
  */
 
+static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
+	.sysc	= &omap3xxx_dsi_sysc,
 };
 
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {

arch/arm/mach-pxa/idp.c

@@ -83,7 +83,8 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_USE_DMA | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-pxa/lubbock.c

@@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	// no D+ pullup; lubbock can't connect/disconnect in software
 };
 
+static void lubbock_init_pcmcia(void)
+{
+	struct clk *clk;
+
+	/* Add an alias for the SA1111 PCMCIA clock */
+	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
+	if (!IS_ERR(clk)) {
+		clkdev_create(clk, NULL, "1800");
+		clk_put(clk);
+	}
+}
+
 static struct resource sa1111_resources[] = {
 	[0] = {
 		.start	= 0x10000000,
@@ -467,6 +479,8 @@ static void __init lubbock_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
+	lubbock_init_pcmcia();
+
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_fb_info(NULL, &sharp_lm8v31);

arch/arm/mach-pxa/xcep.c

@@ -120,7 +120,8 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata xcep_smc91x_info = {
-	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-realview/core.c

@@ -93,7 +93,8 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_NOWAIT,
 };
 
 static struct platform_device realview_eth_device = {

arch/arm/mach-sa1100/clock.c

@@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk)
 }
 
 static struct clkops clk_36864_ops = {
+	.enable		= clk_cpu_enable,
+	.disable	= clk_cpu_disable,
 	.get_rate	= clk_36864_get_rate,
 };
 
@@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = {
 	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
 };
 
-static int __init sa11xx_clk_init(void)
+int __init sa11xx_clk_init(void)
 {
 	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
-core_initcall(sa11xx_clk_init);

arch/arm/mach-sa1100/generic.c

@@ -34,6 +34,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -95,6 +96,8 @@ static void sa1100_power_off(void)
 
 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
 {
+	clear_reset_status(RESET_STATUS_ALL);
+
 	if (mode == REBOOT_SOFT) {
 		/* Jump into ROM at address 0 */
 		soft_restart(0);
@@ -388,6 +391,7 @@ void __init sa1100_init_irq(void)
 	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
 
 	sa1100_init_gpio();
+	sa11xx_clk_init();
 }
 
 /*

arch/arm/mach-sa1100/generic.h

@@ -44,3 +44,5 @@ int sa11x0_pm_init(void);
 #else
 static inline int sa11x0_pm_init(void) { return 0; }
 #endif
+
+int sa11xx_clk_init(void);

arch/arm/mach-sa1100/pleb.c

@@ -45,7 +45,7 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c

@@ -41,39 +41,26 @@
 
 #define REGULATOR_IRQ_MASK	BIT(2)	/* IRQ2, active low */
 
-static void __iomem *irqc;
-
-static const u8 da9063_mask_regs[] = {
-	DA9063_REG_IRQ_MASK_A,
-	DA9063_REG_IRQ_MASK_B,
-	DA9063_REG_IRQ_MASK_C,
-	DA9063_REG_IRQ_MASK_D,
-};
-
-/* DA9210 System Control and Event Registers */
+/* start of DA9210 System Control and Event Registers */
 #define DA9210_REG_MASK_A		0x54
-#define DA9210_REG_MASK_B		0x55
-
-static const u8 da9210_mask_regs[] = {
-	DA9210_REG_MASK_A,
-	DA9210_REG_MASK_B,
-};
-
-static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
-			     unsigned int nregs)
-{
-	unsigned int i;
 
-	dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
+static void __iomem *irqc;
 
-	for (i = 0; i < nregs; i++) {
-		int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
-		if (error) {
-			dev_err(&client->dev, "i2c error %d\n", error);
-			return;
-		}
-	}
-}
+/* first byte sets the memory pointer, following are consecutive reg values */
+static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
+static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
+
+static struct i2c_msg da9xxx_msgs[2] = {
+	{
+		.addr = 0x58,
+		.len = ARRAY_SIZE(da9063_irq_clr),
+		.buf = da9063_irq_clr,
+	}, {
+		.addr = 0x68,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
+	},
+};
 
 static int regulator_quirk_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	client = to_i2c_client(dev);
 	dev_dbg(dev, "Detected %s\n", client->name);
 
-	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
-		da9xxx_mask_irqs(client, da9063_mask_regs,
-				 ARRAY_SIZE(da9063_mask_regs));
-	else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
-		da9xxx_mask_irqs(client, da9210_mask_regs,
-				 ARRAY_SIZE(da9210_mask_regs));
+	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
+		int ret;
+
+		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		if (ret != ARRAY_SIZE(da9xxx_msgs))
+			dev_err(&client->dev, "i2c error %d\n", ret);
+	}
 
 	mon = ioread32(irqc + IRQC_MONITOR);
 	if (mon & REGULATOR_IRQ_MASK)