Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 c9d8230e 编写于 作者: T Tony Lindgren
浏览文件
操作

omap: mux: Remove old mux code 

All mach-omap2 omaps should now use the new mux code.
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 f99bf16d
无相关合并请求
隐藏空白更改
内联 并排
Showing with 1 addition and 528 deletion
arch/arm/mach-omap2/board-3630sdp.c
浏览文件 @ c9d8230e
......@@ -18,7 +18,6 @@
#include <plat/common.h>
#include <plat/board.h>
#include <plat/gpmc-smc91x.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <mach/board-zoom.h>
......
arch/arm/mach-omap2/board-generic.c
浏览文件 @ c9d8230e
......@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
......
arch/arm/mach-omap2/board-rx51-peripherals.c
浏览文件 @ c9d8230e
......@@ -25,7 +25,6 @@
#include <linux/mmc/host.h>
#include <plat/mcspi.h>
#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/dma.h>
......
arch/arm/mach-omap2/board-rx51-video.c
浏览文件 @ c9d8230e
......@@ -16,7 +16,6 @@
#include <linux/mm.h>
#include <asm/mach-types.h>
#include <plat/mux.h>
#include <plat/display.h>
#include <plat/vram.h>
#include <plat/mcspi.h>
......
arch/arm/mach-omap2/io.c
浏览文件 @ c9d8230e
......@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <plat/gpmc.h>
......@@ -324,7 +323,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
omap2430_hwmod_init();
else if (cpu_is_omap34xx())
omap3xxx_hwmod_init();
omap2_mux_init();
/* The OPP tables have to be registered before a clk init */
omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
......
arch/arm/mach-omap2/mux.c
浏览文件 @ c9d8230e
......@@ -37,7 +37,6 @@
#include <asm/system.h>
#include <plat/control.h>
#include <plat/mux.h>
#include "mux.h"
......@@ -78,301 +77,6 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
}
}
#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
/* NOTE: See mux.h for the enumeration */
static struct pin_config __initdata_or_module omap24xx_pins[] = {
/*
* description mux mux pull pull debug
* offset mode ena type
*/
/* 24xx I2C */
MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1)
MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1)
MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 1, 1)
MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1)
/* Menelaus interrupt */
MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1)
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
/* 24xx GPMC chipselects, wait pin monitoring */
MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1)
MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1)
MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
MUX_CFG_24XX("P1_GPMC_WAIT3", 0x09d, 0, 1, 1, 1)
/* 24xx McBSP */
MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1)
MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1)
MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1)
MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1)
/* 24xx GPIO */
MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1)
MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("N15_24XX_GPIO85", 0x103, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
MUX_CFG_24XX("P20_24XX_GPIO93", 0x10b, 3, 0, 0, 1)
MUX_CFG_24XX("P18_24XX_GPIO95", 0x10d, 3, 0, 0, 1)
MUX_CFG_24XX("M18_24XX_GPIO96", 0x10e, 3, 0, 0, 1)
MUX_CFG_24XX("L14_24XX_GPIO97", 0x10f, 3, 0, 0, 1)
MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1)
/* 242x DBG GPIO */
MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
MUX_CFG_24XX("W2_242X_GPIO50", 0xd4, 3, 0, 0, 1)
MUX_CFG_24XX("U4_242X_GPIO51", 0xd5, 3, 0, 0, 1)
MUX_CFG_24XX("V3_242X_GPIO52", 0xd6, 3, 0, 0, 1)
MUX_CFG_24XX("V2_242X_GPIO53", 0xd7, 3, 0, 0, 1)
MUX_CFG_24XX("V6_242X_GPIO53", 0xcf, 3, 0, 0, 1)
MUX_CFG_24XX("T4_242X_GPIO54", 0xd8, 3, 0, 0, 1)
MUX_CFG_24XX("Y4_242X_GPIO54", 0xd0, 3, 0, 0, 1)
MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1)
MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1)
/* 24xx external DMA requests */
MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1)
MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1)
MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1)
MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1)
MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1)
MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1)
/* UART3 */
MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1)
MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1)
/* MMC/SDIO */
MUX_CFG_24XX("G19_24XX_MMC_CLKO", 0x0f3, 0, 0, 0, 1)
MUX_CFG_24XX("H18_24XX_MMC_CMD", 0x0f4, 0, 0, 0, 1)
MUX_CFG_24XX("F20_24XX_MMC_DAT0", 0x0f5, 0, 0, 0, 1)
MUX_CFG_24XX("H14_24XX_MMC_DAT1", 0x0f6, 0, 0, 0, 1)
MUX_CFG_24XX("E19_24XX_MMC_DAT2", 0x0f7, 0, 0, 0, 1)
MUX_CFG_24XX("D19_24XX_MMC_DAT3", 0x0f8, 0, 0, 0, 1)
MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0", 0x0f9, 0, 0, 0, 1)
MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1", 0x0fa, 0, 0, 0, 1)
MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2", 0x0fb, 0, 0, 0, 1)
MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1)
MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1)
MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1)
/* Full speed USB */
MUX_CFG_24XX("J20_24XX_USB0_PUEN", 0x11d, 0, 0, 0, 1)
MUX_CFG_24XX("J19_24XX_USB0_VP", 0x11e, 0, 0, 0, 1)
MUX_CFG_24XX("K20_24XX_USB0_VM", 0x11f, 0, 0, 0, 1)
MUX_CFG_24XX("J18_24XX_USB0_RCV", 0x120, 0, 0, 0, 1)
MUX_CFG_24XX("K19_24XX_USB0_TXEN", 0x121, 0, 0, 0, 1)
MUX_CFG_24XX("J14_24XX_USB0_SE0", 0x122, 0, 0, 0, 1)
MUX_CFG_24XX("K18_24XX_USB0_DAT", 0x123, 0, 0, 0, 1)
MUX_CFG_24XX("N14_24XX_USB1_SE0", 0x0ed, 2, 0, 0, 1)
MUX_CFG_24XX("W12_24XX_USB1_SE0", 0x0dd, 3, 0, 0, 1)
MUX_CFG_24XX("P15_24XX_USB1_DAT", 0x0ee, 2, 0, 0, 1)
MUX_CFG_24XX("R13_24XX_USB1_DAT", 0x0e0, 3, 0, 0, 1)
MUX_CFG_24XX("W20_24XX_USB1_TXEN", 0x0ec, 2, 0, 0, 1)
MUX_CFG_24XX("P13_24XX_USB1_TXEN", 0x0df, 3, 0, 0, 1)
MUX_CFG_24XX("V19_24XX_USB1_RCV", 0x0eb, 2, 0, 0, 1)
MUX_CFG_24XX("V12_24XX_USB1_RCV", 0x0de, 3, 0, 0, 1)
MUX_CFG_24XX("AA10_24XX_USB2_SE0", 0x0e5, 2, 0, 0, 1)
MUX_CFG_24XX("Y11_24XX_USB2_DAT", 0x0e8, 2, 0, 0, 1)
MUX_CFG_24XX("AA12_24XX_USB2_TXEN", 0x0e9, 2, 0, 0, 1)
MUX_CFG_24XX("AA6_24XX_USB2_RCV", 0x0e6, 2, 0, 0, 1)
MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0", 0x0e7, 2, 0, 0, 1)
/* Keypad GPIO*/
MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1)
MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1)
MUX_CFG_24XX("V18_24XX_KBR2", 0x139, 3, 1, 1, 1)
MUX_CFG_24XX("M21_24XX_KBR3", 0xc9, 3, 1, 1, 1)
MUX_CFG_24XX("E5__24XX_KBR4", 0x138, 3, 1, 1, 1)
MUX_CFG_24XX("M18_24XX_KBR5", 0x10e, 3, 1, 1, 1)
MUX_CFG_24XX("R20_24XX_KBC0", 0x108, 3, 0, 0, 1)
MUX_CFG_24XX("M14_24XX_KBC1", 0x109, 3, 0, 0, 1)
MUX_CFG_24XX("H19_24XX_KBC2", 0x114, 3, 0, 0, 1)
MUX_CFG_24XX("V17_24XX_KBC3", 0x135, 3, 0, 0, 1)
MUX_CFG_24XX("P21_24XX_KBC4", 0xca, 3, 0, 0, 1)
MUX_CFG_24XX("L14_24XX_KBC5", 0x10f, 3, 0, 0, 1)
MUX_CFG_24XX("N19_24XX_KBC6", 0x110, 3, 0, 0, 1)
/* 24xx Menelaus Keypad GPIO */
MUX_CFG_24XX("B3__24XX_KBR5", 0x30, 3, 1, 1, 1)
MUX_CFG_24XX("AA4_24XX_KBC2", 0xe7, 3, 0, 0, 1)
MUX_CFG_24XX("B13_24XX_KBC6", 0x110, 3, 0, 0, 1)
/* 2430 USB */
MUX_CFG_24XX("AD9_2430_USB0_PUEN", 0x133, 4, 0, 0, 1)
MUX_CFG_24XX("Y11_2430_USB0_VP", 0x134, 4, 0, 0, 1)
MUX_CFG_24XX("AD7_2430_USB0_VM", 0x135, 4, 0, 0, 1)
MUX_CFG_24XX("AE7_2430_USB0_RCV", 0x136, 4, 0, 0, 1)
MUX_CFG_24XX("AD4_2430_USB0_TXEN", 0x137, 4, 0, 0, 1)
MUX_CFG_24XX("AF9_2430_USB0_SE0", 0x138, 4, 0, 0, 1)
MUX_CFG_24XX("AE6_2430_USB0_DAT", 0x139, 4, 0, 0, 1)
MUX_CFG_24XX("AD24_2430_USB1_SE0", 0x107, 2, 0, 0, 1)
MUX_CFG_24XX("AB24_2430_USB1_RCV", 0x108, 2, 0, 0, 1)
MUX_CFG_24XX("Y25_2430_USB1_TXEN", 0x109, 2, 0, 0, 1)
MUX_CFG_24XX("AA26_2430_USB1_DAT", 0x10A, 2, 0, 0, 1)
/* 2430 HS-USB */
MUX_CFG_24XX("AD9_2430_USB0HS_DATA3", 0x133, 0, 0, 0, 1)
MUX_CFG_24XX("Y11_2430_USB0HS_DATA4", 0x134, 0, 0, 0, 1)
MUX_CFG_24XX("AD7_2430_USB0HS_DATA5", 0x135, 0, 0, 0, 1)
MUX_CFG_24XX("AE7_2430_USB0HS_DATA6", 0x136, 0, 0, 0, 1)
MUX_CFG_24XX("AD4_2430_USB0HS_DATA2", 0x137, 0, 0, 0, 1)
MUX_CFG_24XX("AF9_2430_USB0HS_DATA0", 0x138, 0, 0, 0, 1)
MUX_CFG_24XX("AE6_2430_USB0HS_DATA1", 0x139, 0, 0, 0, 1)
MUX_CFG_24XX("AE8_2430_USB0HS_CLK", 0x13A, 0, 0, 0, 1)
MUX_CFG_24XX("AD8_2430_USB0HS_DIR", 0x13B, 0, 0, 0, 1)
MUX_CFG_24XX("AE5_2430_USB0HS_STP", 0x13c, 0, 1, 1, 1)
MUX_CFG_24XX("AE9_2430_USB0HS_NXT", 0x13D, 0, 0, 0, 1)
MUX_CFG_24XX("AC7_2430_USB0HS_DATA7", 0x13E, 0, 0, 0, 1)
/* 2430 McBSP */
MUX_CFG_24XX("AD6_2430_MCBSP_CLKS", 0x011E, 0, 0, 0, 1)
MUX_CFG_24XX("AB2_2430_MCBSP1_CLKR", 0x011A, 0, 0, 0, 1)
MUX_CFG_24XX("AD5_2430_MCBSP1_FSR", 0x011B, 0, 0, 0, 1)
MUX_CFG_24XX("AA1_2430_MCBSP1_DX", 0x011C, 0, 0, 0, 1)
MUX_CFG_24XX("AF3_2430_MCBSP1_DR", 0x011D, 0, 0, 0, 1)
MUX_CFG_24XX("AB3_2430_MCBSP1_FSX", 0x011F, 0, 0, 0, 1)
MUX_CFG_24XX("Y9_2430_MCBSP1_CLKX", 0x0120, 0, 0, 0, 1)
MUX_CFG_24XX("AC10_2430_MCBSP2_FSX", 0x012E, 1, 0, 0, 1)
MUX_CFG_24XX("AD16_2430_MCBSP2_CLX", 0x012F, 1, 0, 0, 1)
MUX_CFG_24XX("AE13_2430_MCBSP2_DX", 0x0130, 1, 0, 0, 1)
MUX_CFG_24XX("AD13_2430_MCBSP2_DR", 0x0131, 1, 0, 0, 1)
MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E, 0, 0, 0, 1)
MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F, 0, 0, 0, 1)
MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF", 0x0130, 0, 0, 0, 1)
MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1)
MUX_CFG_24XX("AC9_2430_MCBSP3_CLKX", 0x0103, 0, 0, 0, 1)
MUX_CFG_24XX("AE4_2430_MCBSP3_FSX", 0x0104, 0, 0, 0, 1)
MUX_CFG_24XX("AE2_2430_MCBSP3_DR", 0x0105, 0, 0, 0, 1)
MUX_CFG_24XX("AF4_2430_MCBSP3_DX", 0x0106, 0, 0, 0, 1)
MUX_CFG_24XX("N3_2430_MCBSP4_CLKX", 0x010B, 1, 0, 0, 1)
MUX_CFG_24XX("AD23_2430_MCBSP4_DR", 0x010C, 1, 0, 0, 1)
MUX_CFG_24XX("AB25_2430_MCBSP4_DX", 0x010D, 1, 0, 0, 1)
MUX_CFG_24XX("AC25_2430_MCBSP4_FSX", 0x010E, 1, 0, 0, 1)
MUX_CFG_24XX("AE16_2430_MCBSP5_CLKX", 0x00ED, 1, 0, 0, 1)
MUX_CFG_24XX("AF12_2430_MCBSP5_FSX", 0x00ED, 1, 0, 0, 1)
MUX_CFG_24XX("K7_2430_MCBSP5_DX", 0x00EF, 1, 0, 0, 1)
MUX_CFG_24XX("M1_2430_MCBSP5_DR", 0x00F0, 1, 0, 0, 1)
/* 2430 MCSPI1 */
MUX_CFG_24XX("Y18_2430_MCSPI1_CLK", 0x010F, 0, 0, 0, 1)
MUX_CFG_24XX("AD15_2430_MCSPI1_SIMO", 0x0110, 0, 0, 0, 1)
MUX_CFG_24XX("AE17_2430_MCSPI1_SOMI", 0x0111, 0, 0, 0, 1)
MUX_CFG_24XX("U1_2430_MCSPI1_CS0", 0x0112, 0, 0, 0, 1)
/* Touchscreen GPIO */
MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1)
};
#define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins)
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
{
u16 orig;
u8 warn = 0, debug = 0;
orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
#ifdef CONFIG_OMAP_MUX_DEBUG
debug = cfg->debug;
#endif
warn = (orig != reg);
if (debug || warn)
printk(KERN_WARNING
"MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
orig, reg);
}
#else
#define omap2_cfg_debug(x, y) do {} while (0)
#endif
static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
{
static DEFINE_SPINLOCK(mux_spin_lock);
unsigned long flags;
u8 reg = 0;
spin_lock_irqsave(&mux_spin_lock, flags);
reg |= cfg->mask & 0x7;
if (cfg->pull_val)
reg |= OMAP2_PULL_ENA;
if (cfg->pu_pd_val)
reg |= OMAP2_PULL_UP;
omap2_cfg_debug(cfg, reg);
omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
spin_unlock_irqrestore(&mux_spin_lock, flags);
return 0;
}
int __init omap2_mux_init(void)
{
u32 mux_pbase;
if (cpu_is_omap2420())
mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
else if (cpu_is_omap2430())
mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
else
return -ENODEV;
mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
if (!mux_base) {
printk(KERN_ERR "mux: Could not ioremap\n");
return -ENODEV;
}
if (cpu_is_omap24xx()) {
arch_mux_cfg.pins = omap24xx_pins;
arch_mux_cfg.size = OMAP24XX_PINS_SZ;
arch_mux_cfg.cfg_reg = omap24xx_cfg_reg;
return omap_mux_register(&arch_mux_cfg);
}
return 0;
}
#else
int __init omap2_mux_init(void)
{
return 0;
}
#endif /* CONFIG_OMAP_MUX */
/*----------------------------------------------------------------------------*/
#ifdef CONFIG_ARCH_OMAP2PLUS
static LIST_HEAD(muxmodes);
static DEFINE_MUTEX(muxmode_mutex);
......@@ -1047,5 +751,3 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
return 0;
}
#endif /* CONFIG_ARCH_OMAP3 */
arch/arm/mach-omap2/pm24xx.c
浏览文件 @ c9d8230e
......@@ -39,7 +39,6 @@
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/control.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/board.h>
......
arch/arm/mach-omap2/usb-ehci.c
浏览文件 @ c9d8230e
......@@ -23,7 +23,6 @@
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <plat/mux.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
......
arch/arm/mach-omap2/usb-musb.c
浏览文件 @ c9d8230e
......@@ -28,7 +28,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <plat/mux.h>
#include <plat/usb.h>
#ifdef CONFIG_USB_MUSB_SOC
......
arch/arm/plat-omap/include/plat/mux.h
浏览文件 @ c9d8230e
......@@ -114,28 +114,11 @@
PU_PD_REG(NA, 0) \
},
#define MUX_CFG_24XX(desc, reg_offset, mode, \
pull_en, pull_mode, dbg) \
{ \
.name = desc, \
.debug = dbg, \
.mux_reg = reg_offset, \
.mask = mode, \
.pull_val = pull_en, \
.pu_pd_val = pull_mode, \
},
/* 24xx/34xx mux bit defines */
#define OMAP2_PULL_ENA (1 << 3)
#define OMAP2_PULL_UP (1 << 4)
#define OMAP2_ALTELECTRICALSEL (1 << 5)
struct pin_config {
char *name;
const unsigned int mux_reg;
unsigned char debug;
#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
const unsigned char mask_offset;
const unsigned char mask;
......@@ -147,7 +130,6 @@ struct pin_config {
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
#endif
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
const char *mux_reg_name;
......@@ -446,208 +428,6 @@ enum omap1xxx_index {
};
enum omap24xx_index {
/* 24xx I2C */
M19_24XX_I2C1_SCL,
L15_24XX_I2C1_SDA,
J15_24XX_I2C2_SCL,
H19_24XX_I2C2_SDA,
/* 24xx Menelaus interrupt */
W19_24XX_SYS_NIRQ,
/* 24xx clock */
W14_24XX_SYS_CLKOUT,
/* 24xx GPMC chipselects, wait pin monitoring */
E2_GPMC_NCS2,
L2_GPMC_NCS7,
L3_GPMC_WAIT0,
N7_GPMC_WAIT1,
M1_GPMC_WAIT2,
P1_GPMC_WAIT3,
/* 242X McBSP */
Y15_24XX_MCBSP2_CLKX,
R14_24XX_MCBSP2_FSX,
W15_24XX_MCBSP2_DR,
V15_24XX_MCBSP2_DX,
/* 24xx GPIO */
M21_242X_GPIO11,
P21_242X_GPIO12,
AA10_242X_GPIO13,
AA6_242X_GPIO14,
AA4_242X_GPIO15,
Y11_242X_GPIO16,
AA12_242X_GPIO17,
AA8_242X_GPIO58,
Y20_24XX_GPIO60,
W4__24XX_GPIO74,
N15_24XX_GPIO85,
M15_24XX_GPIO92,
P20_24XX_GPIO93,
P18_24XX_GPIO95,
M18_24XX_GPIO96,
L14_24XX_GPIO97,
J15_24XX_GPIO99,
V14_24XX_GPIO117,
P14_24XX_GPIO125,
/* 242x DBG GPIO */
V4_242X_GPIO49,
W2_242X_GPIO50,
U4_242X_GPIO51,
V3_242X_GPIO52,
V2_242X_GPIO53,
V6_242X_GPIO53,
T4_242X_GPIO54,
Y4_242X_GPIO54,
T3_242X_GPIO55,
U2_242X_GPIO56,
/* 24xx external DMA requests */
AA10_242X_DMAREQ0,
AA6_242X_DMAREQ1,
E4_242X_DMAREQ2,
G4_242X_DMAREQ3,
D3_242X_DMAREQ4,
E3_242X_DMAREQ5,
/* UART3 */
K15_24XX_UART3_TX,
K14_24XX_UART3_RX,
/* MMC/SDIO */
G19_24XX_MMC_CLKO,
H18_24XX_MMC_CMD,
F20_24XX_MMC_DAT0,
H14_24XX_MMC_DAT1,
E19_24XX_MMC_DAT2,
D19_24XX_MMC_DAT3,
F19_24XX_MMC_DAT_DIR0,
E20_24XX_MMC_DAT_DIR1,
F18_24XX_MMC_DAT_DIR2,
E18_24XX_MMC_DAT_DIR3,
G18_24XX_MMC_CMD_DIR,
H15_24XX_MMC_CLKI,
/* Full speed USB */
J20_24XX_USB0_PUEN,
J19_24XX_USB0_VP,
K20_24XX_USB0_VM,
J18_24XX_USB0_RCV,
K19_24XX_USB0_TXEN,
J14_24XX_USB0_SE0,
K18_24XX_USB0_DAT,
N14_24XX_USB1_SE0,
W12_24XX_USB1_SE0,
P15_24XX_USB1_DAT,
R13_24XX_USB1_DAT,
W20_24XX_USB1_TXEN,
P13_24XX_USB1_TXEN,
V19_24XX_USB1_RCV,
V12_24XX_USB1_RCV,
AA10_24XX_USB2_SE0,
Y11_24XX_USB2_DAT,
AA12_24XX_USB2_TXEN,
AA6_24XX_USB2_RCV,
AA4_24XX_USB2_TLLSE0,
/* Keypad GPIO*/
T19_24XX_KBR0,
R19_24XX_KBR1,
V18_24XX_KBR2,
M21_24XX_KBR3,
E5__24XX_KBR4,
M18_24XX_KBR5,
R20_24XX_KBC0,
M14_24XX_KBC1,
H19_24XX_KBC2,
V17_24XX_KBC3,
P21_24XX_KBC4,
L14_24XX_KBC5,
N19_24XX_KBC6,
/* 24xx Menelaus Keypad GPIO */
B3__24XX_KBR5,
AA4_24XX_KBC2,
B13_24XX_KBC6,
/* 2430 USB */
AD9_2430_USB0_PUEN,
Y11_2430_USB0_VP,
AD7_2430_USB0_VM,
AE7_2430_USB0_RCV,
AD4_2430_USB0_TXEN,
AF9_2430_USB0_SE0,
AE6_2430_USB0_DAT,
AD24_2430_USB1_SE0,
AB24_2430_USB1_RCV,
Y25_2430_USB1_TXEN,
AA26_2430_USB1_DAT,
/* 2430 HS-USB */
AD9_2430_USB0HS_DATA3,
Y11_2430_USB0HS_DATA4,
AD7_2430_USB0HS_DATA5,
AE7_2430_USB0HS_DATA6,
AD4_2430_USB0HS_DATA2,
AF9_2430_USB0HS_DATA0,
AE6_2430_USB0HS_DATA1,
AE8_2430_USB0HS_CLK,
AD8_2430_USB0HS_DIR,
AE5_2430_USB0HS_STP,
AE9_2430_USB0HS_NXT,
AC7_2430_USB0HS_DATA7,
/* 2430 McBSP */
AD6_2430_MCBSP_CLKS,
AB2_2430_MCBSP1_CLKR,
AD5_2430_MCBSP1_FSR,
AA1_2430_MCBSP1_DX,
AF3_2430_MCBSP1_DR,
AB3_2430_MCBSP1_FSX,
Y9_2430_MCBSP1_CLKX,
AC10_2430_MCBSP2_FSX,
AD16_2430_MCBSP2_CLX,
AE13_2430_MCBSP2_DX,
AD13_2430_MCBSP2_DR,
AC10_2430_MCBSP2_FSX_OFF,
AD16_2430_MCBSP2_CLX_OFF,
AE13_2430_MCBSP2_DX_OFF,
AD13_2430_MCBSP2_DR_OFF,
AC9_2430_MCBSP3_CLKX,
AE4_2430_MCBSP3_FSX,
AE2_2430_MCBSP3_DR,
AF4_2430_MCBSP3_DX,
N3_2430_MCBSP4_CLKX,
AD23_2430_MCBSP4_DR,
AB25_2430_MCBSP4_DX,
AC25_2430_MCBSP4_FSX,
AE16_2430_MCBSP5_CLKX,
AF12_2430_MCBSP5_FSX,
K7_2430_MCBSP5_DX,
M1_2430_MCBSP5_DR,
/* 2430 McSPI*/
Y18_2430_MCSPI1_CLK,
AD15_2430_MCSPI1_SIMO,
AE17_2430_MCSPI1_SOMI,
U1_2430_MCSPI1_CS0,
/* Touchscreen GPIO */
AF19_2430_GPIO_85,
};
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
......
arch/arm/plat-omap/mux.c
浏览文件 @ c9d8230e
......@@ -54,7 +54,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
{
struct pin_config *reg;
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (!cpu_class_is_omap1()) {
printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
index);
WARN_ON(1);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或
反馈
建议 客服 返回
顶部