Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 c9b01df3 编写于 作者: S Solomon Peachy 提交者： Greg Kroah-Hartman
浏览文件
操作

Staging: wlan-ng: Remove PCI/PLX/PCMCIA files. 

This portion of the driver is not needed at all, so remove it.
Signed-off-by: NSolomon Peachy <pizza@shaftnet.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 f02466fc
展开全部 隐藏空白更改
内联 并排
Showing with 0 addition and 6310 deletion
drivers/staging/wlan-ng/README
浏览文件 @ c9b01df3
......@@ -3,6 +3,5 @@ TODO:
- sparse warnings
- Lindent cleanups
- move to use the in-kernel wireless stack
- possible enable the pcmcia and pci portions of the driver
Please send all patches to Greg Kroah-Hartman <greg@kroah.com>
drivers/staging/wlan-ng/hfa384x.c 已删除 100644 → 0
浏览文件 @ f02466fc
此差异已折叠。
drivers/staging/wlan-ng/prism2_cs.c 已删除 100644 → 0
浏览文件 @ f02466fc
此差异已折叠。
drivers/staging/wlan-ng/prism2_pci.c 已删除 100644 → 0
浏览文件 @ f02466fc
#define WLAN_HOSTIF WLAN_PCI
#include "hfa384x.c"
#include "prism2mgmt.c"
#include "prism2mib.c"
#include "prism2sta.c"
#define PCI_SIZE 0x1000 /* Memory size - 4K bytes */
/* ISL3874A 11Mb/s WLAN controller */
#define PCIVENDOR_INTERSIL 0x1260UL
#define PCIDEVICE_ISL3874 0x3873UL /* [MSM] yeah I know...the ID says
3873. Trust me, it's a 3874. */
/* Samsung SWL-2210P 11Mb/s WLAN controller (uses ISL3874A) */
#define PCIVENDOR_SAMSUNG 0x167dUL
#define PCIDEVICE_SWL_2210P 0xa000UL
#define PCIVENDOR_NETGEAR 0x1385UL /* for MA311 */
/* PCI Class & Sub-Class code, Network-'Other controller' */
#define PCI_CLASS_NETWORK_OTHERS 0x280
/*----------------------------------------------------------------
* prism2sta_probe_pci
*
* Probe routine called when a PCI device w/ matching ID is found.
* The ISL3874 implementation uses the following map:
* BAR0: Prism2.x registers memory mapped, size=4k
* Here's the sequence:
* - Allocate the PCI resources.
* - Read the PCMCIA attribute memory to make sure we have a WLAN card
* - Reset the MAC
* - Initialize the netdev and wlan data
* - Initialize the MAC
*
* Arguments:
* pdev ptr to pci device structure containing info about
* pci configuration.
* id ptr to the device id entry that matched this device.
*
* Returns:
* zero - success
* negative - failed
*
* Side effects:
*
*
* Call context:
* process thread
*
----------------------------------------------------------------*/
static int __devinit
prism2sta_probe_pci(
struct pci_dev *pdev,
const struct pci_device_id *id)
{
int result;
phys_t phymem = 0;
void __iomem *mem = NULL;
wlandevice_t *wlandev = NULL;
hfa384x_t *hw = NULL;
DBFENTER;
/* Enable the pci device */
if (pci_enable_device(pdev)) {
WLAN_LOG_ERROR("%s: pci_enable_device() failed.\n", dev_info);
result = -EIO;
goto fail;
}
/* Figure out our resources */
phymem = pci_resource_start(pdev, 0);
if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) {
printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n");
result = -EIO;
goto fail;
}
mem = ioremap(phymem, PCI_SIZE);
if ( mem == 0 ) {
WLAN_LOG_ERROR("%s: ioremap() failed.\n", dev_info);
result = -EIO;
goto fail;
}
/* Log the device */
WLAN_LOG_INFO("A Prism2.5 PCI device found, "
"phymem:0x%llx, irq:%d, mem:0x%p\n",
(unsigned long long)phymem, pdev->irq, mem);
if ((wlandev = create_wlan()) == NULL) {
WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
result = -EIO;
goto fail;
}
hw = wlandev->priv;
if ( wlan_setup(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
result = -EIO;
goto fail;
}
/* Setup netdevice's ability to report resources
* Note: the netdevice was allocated by wlan_setup()
*/
wlandev->netdev->irq = pdev->irq;
wlandev->netdev->mem_start = (unsigned long) mem;
wlandev->netdev->mem_end = wlandev->netdev->mem_start +
pci_resource_len(pdev, 0);
/* Initialize the hw data */
hfa384x_create(hw, wlandev->netdev->irq, 0, mem);
hw->wlandev = wlandev;
/* Register the wlandev, this gets us a name and registers the
* linux netdevice.
*/
SET_MODULE_OWNER(wlandev->netdev);
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
SET_NETDEV_DEV(wlandev->netdev, &(pdev->dev));
#endif
if ( register_wlandev(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
result = -EIO;
goto fail;
}
#if 0
/* TODO: Move this and an irq test into an hfa384x_testif() routine.
*/
outw(PRISM2STA_MAGIC, HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
reg=inw( HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
if ( reg != PRISM2STA_MAGIC ) {
WLAN_LOG_ERROR("MAC register access test failed!\n");
result = -EIO;
goto fail;
}
#endif
/* Do a chip-level reset on the MAC */
if (prism2_doreset) {
result = hfa384x_corereset(hw,
prism2_reset_holdtime,
prism2_reset_settletime, 0);
if (result != 0) {
WLAN_LOG_ERROR(
"%s: hfa384x_corereset() failed.\n",
dev_info);
unregister_wlandev(wlandev);
hfa384x_destroy(hw);
result = -EIO;
goto fail;
}
}
pci_set_drvdata(pdev, wlandev);
/* Shouldn't actually hook up the IRQ until we
* _know_ things are alright. A test routine would help.
*/
request_irq(wlandev->netdev->irq, hfa384x_interrupt,
SA_SHIRQ, wlandev->name, wlandev);
wlandev->msdstate = WLAN_MSD_HWPRESENT;
result = 0;
goto done;
fail:
pci_set_drvdata(pdev, NULL);
if (wlandev) kfree(wlandev);
if (hw) kfree(hw);
if (mem) iounmap(mem);
pci_release_regions(pdev);
pci_disable_device(pdev);
done:
DBFEXIT;
return result;
}
static void __devexit prism2sta_remove_pci(struct pci_dev *pdev)
{
wlandevice_t *wlandev;
hfa384x_t *hw;
wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
hw = wlandev->priv;
p80211netdev_hwremoved(wlandev);
/* reset hardware */
prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
if (pdev->irq)
free_irq(pdev->irq, wlandev);
unregister_wlandev(wlandev);
/* free local stuff */
if (hw) {
hfa384x_destroy(hw);
kfree(hw);
}
iounmap((void __iomem *)wlandev->netdev->mem_start);
wlan_unsetup(wlandev);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
kfree(wlandev);
}
static struct pci_device_id pci_id_tbl[] = {
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3874,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller"
},
{
PCIVENDOR_INTERSIL, 0x3872,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Intersil Prism2.5 ISL3872 11Mb/s WLAN Controller"
},
{
PCIVENDOR_SAMSUNG, PCIDEVICE_SWL_2210P,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Samsung MagicLAN SWL-2210P 11Mb/s WLAN Controller"
},
{ /* for NetGear MA311 */
PCIVENDOR_NETGEAR, 0x3872,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Netgear MA311 WLAN Controller"
},
{
0, 0, 0, 0, 0, 0, 0
}
};
MODULE_DEVICE_TABLE(pci, pci_id_tbl);
/* Function declared here because of ptr reference below */
static int __devinit prism2sta_probe_pci(struct pci_dev *pdev,
const struct pci_device_id *id);
static void __devexit prism2sta_remove_pci(struct pci_dev *pdev);
static struct pci_driver prism2_pci_drv_id = {
.name = "prism2_pci",
.id_table = pci_id_tbl,
.probe = prism2sta_probe_pci,
.remove = prism2sta_remove_pci,
#ifdef CONFIG_PM
.suspend = prism2sta_suspend_pci,
.resume = prism2sta_resume_pci,
#endif
};
#ifdef MODULE
static int __init prism2pci_init(void)
{
WLAN_LOG_NOTICE("%s Loaded\n", version);
return pci_module_init(&prism2_pci_drv_id);
};
static void __exit prism2pci_cleanup(void)
{
pci_unregister_driver(&prism2_pci_drv_id);
};
module_init(prism2pci_init);
module_exit(prism2pci_cleanup);
#endif
int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
{
int result = 0;
unsigned long timeout;
UINT16 reg;
DBFENTER;
/* Assert reset and wait awhile
* (note: these delays are _really_ long, but they appear to be
* necessary.)
*/
hfa384x_setreg(hw, 0xc5, HFA384x_PCICOR);
timeout = jiffies + HZ/4;
while(time_before(jiffies, timeout)) udelay(5);
if (genesis) {
hfa384x_setreg(hw, genesis, HFA384x_PCIHCR);
timeout = jiffies + HZ/4;
while(time_before(jiffies, timeout)) udelay(5);
}
/* Clear the reset and wait some more
*/
hfa384x_setreg(hw, 0x45, HFA384x_PCICOR);
timeout = jiffies + HZ/2;
while(time_before(jiffies, timeout)) udelay(5);
/* Wait for f/w to complete initialization (CMD:BUSY == 0)
*/
timeout = jiffies + 2*HZ;
reg = hfa384x_getreg(hw, HFA384x_CMD);
while ( HFA384x_CMD_ISBUSY(reg) && time_before( jiffies, timeout) ) {
reg = hfa384x_getreg(hw, HFA384x_CMD);
udelay(10);
}
if (HFA384x_CMD_ISBUSY(reg)) {
WLAN_LOG_WARNING("corereset: Timed out waiting for cmd register.\n");
result=1;
}
DBFEXIT;
return result;
}
drivers/staging/wlan-ng/prism2_plx.c 已删除 100644 → 0
浏览文件 @ f02466fc
#define WLAN_HOSTIF WLAN_PLX
#include "hfa384x.c"
#include "prism2mgmt.c"
#include "prism2mib.c"
#include "prism2sta.c"
#define PLX_ATTR_SIZE 0x1000 /* Attribute memory size - 4K bytes */
#define COR_OFFSET 0x3e0 /* COR attribute offset of Prism2 PC card */
#define COR_VALUE 0x41 /* Enable PC card with irq in level trigger */
#define PLX_INTCSR 0x4c /* Interrupt Control and Status Register */
#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */
#define PLX_MIN_ATTR_LEN 512 /* at least 2 x 256 is needed for CIS */
/* 3Com 3CRW777A (PLX) board ID */
#define PCIVENDOR_3COM 0x10B7
#define PCIDEVICE_AIRCONNECT 0x7770
/* Eumitcom PCI WL11000 PCI Adapter (PLX) board device+vendor ID */
#define PCIVENDOR_EUMITCOM 0x1638UL
#define PCIDEVICE_WL11000 0x1100UL
/* Global Sun Tech GL24110P PCI Adapter (PLX) board device+vendor ID */
#define PCIVENDOR_GLOBALSUN 0x16abUL
#define PCIDEVICE_GL24110P 0x1101UL
#define PCIDEVICE_GL24110P_ALT 0x1102UL
/* Netgear MA301 PCI Adapter (PLX) board device+vendor ID */
#define PCIVENDOR_NETGEAR 0x1385UL
#define PCIDEVICE_MA301 0x4100UL
/* US Robotics USR2410 PCI Adapter (PLX) board device+vendor ID */
#define PCIVENDOR_USROBOTICS 0x16ecUL
#define PCIDEVICE_USR2410 0x3685UL
/* Linksys WPC11 card with the WDT11 adapter (PLX) board device+vendor ID */
#define PCIVENDOR_Linksys 0x16abUL
#define PCIDEVICE_Wpc11Wdt11 0x1102UL
/* National Datacomm Corp SOHOware Netblaster II PCI */
#define PCIVENDOR_NDC 0x15e8UL
#define PCIDEVICE_NCP130_PLX 0x0130UL
#define PCIDEVICE_NCP130_ASIC 0x0131UL
/* NDC NCP130_PLX is also sold by Corega. Their name is CGWLPCIA11 */
#define PCIVENDOR_COREGA PCIVENDOR_NDC
#define PCIDEVICE_CGWLPCIA11 PCIDEVICE_NCP130_PLX
/* PCI Class & Sub-Class code, Network-'Other controller' */
#define PCI_CLASS_NETWORK_OTHERS 0x280
/*----------------------------------------------------------------
* prism2sta_probe_plx
*
* Probe routine called when a PCI device w/ matching ID is found.
* This PLX implementation uses the following map:
* BAR0: Unused
* BAR1: ????
* BAR2: PCMCIA attribute memory
* BAR3: PCMCIA i/o space
* Here's the sequence:
* - Allocate the PCI resources.
* - Read the PCMCIA attribute memory to make sure we have a WLAN card
* - Reset the MAC using the PCMCIA COR
* - Initialize the netdev and wlan data
* - Initialize the MAC
*
* Arguments:
* pdev ptr to pci device structure containing info about
* pci configuration.
* id ptr to the device id entry that matched this device.
*
* Returns:
* zero - success
* negative - failed
*
* Side effects:
*
*
* Call context:
* process thread
*
----------------------------------------------------------------*/
static int __devinit
prism2sta_probe_plx(
struct pci_dev *pdev,
const struct pci_device_id *id)
{
int result;
phys_t pccard_ioaddr;
phys_t pccard_attr_mem;
unsigned int pccard_attr_len;
void __iomem *attr_mem = NULL;
UINT32 plx_addr;
wlandevice_t *wlandev = NULL;
hfa384x_t *hw = NULL;
int reg;
u32 regic;
if (pci_enable_device(pdev))
return -EIO;
/* TMC7160 boards are special */
if ((pdev->vendor == PCIVENDOR_NDC) &&
(pdev->device == PCIDEVICE_NCP130_ASIC)) {
unsigned long delay;
pccard_attr_mem = 0;
pccard_ioaddr = pci_resource_start(pdev, 1);
outb(0x45, pccard_ioaddr);
delay = jiffies + 1*HZ;
while (time_before(jiffies, delay));
if (inb(pccard_ioaddr) != 0x45) {
WLAN_LOG_ERROR("Initialize the TMC7160 failed. (0x%x)\n", inb(pccard_ioaddr));
return -EIO;
}
pccard_ioaddr = pci_resource_start(pdev, 2);
prism2_doreset = 0;
WLAN_LOG_INFO("NDC NCP130 with TMC716(ASIC) PCI interface device found at io:0x%x, irq:%d\n", pccard_ioaddr, pdev->irq);
goto init;
}
/* Collect the resource requirements */
pccard_attr_mem = pci_resource_start(pdev, 2);
pccard_attr_len = pci_resource_len(pdev, 2);
if (pccard_attr_len < PLX_MIN_ATTR_LEN)
return -EIO;
pccard_ioaddr = pci_resource_start(pdev, 3);
/* bjoern: We need to tell the card to enable interrupts, in
* case the serial eprom didn't do this already. See the
* PLX9052 data book, p8-1 and 8-24 for reference.
* [MSM]: This bit of code came from the orinoco_cs driver.
*/
plx_addr = pci_resource_start(pdev, 1);
regic = 0;
regic = inl(plx_addr+PLX_INTCSR);
if(regic & PLX_INTCSR_INTEN) {
WLAN_LOG_DEBUG(1,
"%s: Local Interrupt already enabled\n", dev_info);
} else {
regic |= PLX_INTCSR_INTEN;
outl(regic, plx_addr+PLX_INTCSR);
regic = inl(plx_addr+PLX_INTCSR);
if(!(regic & PLX_INTCSR_INTEN)) {
WLAN_LOG_ERROR(
"%s: Couldn't enable Local Interrupts\n",
dev_info);
return -EIO;
}
}
/* These assignments are here in case of future mappings for
* io space and irq that might be similar to ioremap
*/
if (!request_mem_region(pccard_attr_mem, pci_resource_len(pdev, 2), "Prism2")) {
WLAN_LOG_ERROR("%s: Couldn't reserve PCI memory region\n", dev_info);
return -EIO;
}
attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
WLAN_LOG_INFO("A PLX PCI/PCMCIA interface device found, "
"phymem:0x%llx, phyio=0x%x, irq:%d, "
"mem: 0x%lx\n",
(unsigned long long)pccard_attr_mem, pccard_ioaddr, pdev->irq,
(unsigned long)attr_mem);
/* Verify whether PC card is present.
* [MSM] This needs improvement, the right thing to do is
* probably to walk the CIS looking for the vendor and product
* IDs. It would be nice if this could be tied in with the
* etc/pcmcia/wlan-ng.conf file. Any volunteers? ;-)
*/
if (
readb(attr_mem + 0) != 0x01 || readb(attr_mem + 2) != 0x03 ||
readb(attr_mem + 4) != 0x00 || readb(attr_mem + 6) != 0x00 ||
readb(attr_mem + 8) != 0xFF || readb(attr_mem + 10) != 0x17 ||
readb(attr_mem + 12) != 0x04 || readb(attr_mem + 14) != 0x67) {
WLAN_LOG_ERROR("Prism2 PC card CIS is invalid.\n");
return -EIO;
}
WLAN_LOG_INFO("A PCMCIA WLAN adapter was found.\n");
/* Write COR to enable PC card */
writeb(COR_VALUE, attr_mem + COR_OFFSET);
reg = readb(attr_mem + COR_OFFSET);
init:
/*
* Now do everything the same as a PCI device
* [MSM] TODO: We could probably factor this out of pcmcia/pci/plx
* and perhaps usb. Perhaps a task for another day.......
*/
if ((wlandev = create_wlan()) == NULL) {
WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
result = -EIO;
goto failed;
}
hw = wlandev->priv;
if ( wlan_setup(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
result = -EIO;
goto failed;
}
/* Setup netdevice's ability to report resources
* Note: the netdevice was allocated by wlan_setup()
*/
wlandev->netdev->irq = pdev->irq;
wlandev->netdev->base_addr = pccard_ioaddr;
wlandev->netdev->mem_start = (unsigned long)attr_mem;
wlandev->netdev->mem_end = (unsigned long)attr_mem + pci_resource_len(pdev, 0);
/* Initialize the hw data */
hfa384x_create(hw, wlandev->netdev->irq, pccard_ioaddr, attr_mem);
hw->wlandev = wlandev;
/* Register the wlandev, this gets us a name and registers the
* linux netdevice.
*/
SET_MODULE_OWNER(wlandev->netdev);
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
SET_NETDEV_DEV(wlandev->netdev, &(pdev->dev));
#endif
if ( register_wlandev(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
result = -EIO;
goto failed;
}
#if 0
/* TODO: Move this and an irq test into an hfa384x_testif() routine.
*/
outw(PRISM2STA_MAGIC, HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
reg=inw( HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
if ( reg != PRISM2STA_MAGIC ) {
WLAN_LOG_ERROR("MAC register access test failed!\n");
result = -EIO;
goto failed;
}
#endif
/* Do a chip-level reset on the MAC */
if (prism2_doreset) {
result = hfa384x_corereset(hw,
prism2_reset_holdtime,
prism2_reset_settletime, 0);
if (result != 0) {
unregister_wlandev(wlandev);
hfa384x_destroy(hw);
WLAN_LOG_ERROR(
"%s: hfa384x_corereset() failed.\n",
dev_info);
result = -EIO;
goto failed;
}
}
pci_set_drvdata(pdev, wlandev);
/* Shouldn't actually hook up the IRQ until we
* _know_ things are alright. A test routine would help.
*/
request_irq(wlandev->netdev->irq, hfa384x_interrupt,
SA_SHIRQ, wlandev->name, wlandev);
wlandev->msdstate = WLAN_MSD_HWPRESENT;
result = 0;
goto done;
failed:
pci_set_drvdata(pdev, NULL);
if (wlandev) kfree(wlandev);
if (hw) kfree(hw);
if (attr_mem) iounmap(attr_mem);
pci_release_regions(pdev);
pci_disable_device(pdev);
done:
DBFEXIT;
return result;
}
static void __devexit prism2sta_remove_plx(struct pci_dev *pdev)
{
wlandevice_t *wlandev;
hfa384x_t *hw;
wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
hw = wlandev->priv;
p80211netdev_hwremoved(wlandev);
/* reset hardware */
prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
if (pdev->irq)
free_irq(pdev->irq, wlandev);
unregister_wlandev(wlandev);
/* free local stuff */
if (hw) {
hfa384x_destroy(hw);
kfree(hw);
}
iounmap((void __iomem *)wlandev->netdev->mem_start);
wlan_unsetup(wlandev);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
kfree(wlandev);
}
static struct pci_device_id plx_id_tbl[] = {
{
PCIVENDOR_EUMITCOM, PCIDEVICE_WL11000,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Eumitcom WL11000 PCI(PLX) card"
},
{
PCIVENDOR_GLOBALSUN, PCIDEVICE_GL24110P,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
},
{
PCIVENDOR_GLOBALSUN, PCIDEVICE_GL24110P_ALT,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
},
{
PCIVENDOR_NETGEAR, PCIDEVICE_MA301,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
},
{
PCIVENDOR_USROBOTICS, PCIDEVICE_USR2410,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"US Robotics USR2410 PCI(PLX) card"
},
{
PCIVENDOR_Linksys, PCIDEVICE_Wpc11Wdt11,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"Linksys WPC11 with WDT11 PCI(PLX) adapter"
},
{
PCIVENDOR_NDC, PCIDEVICE_NCP130_PLX,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"NDC Netblaster II PCI(PLX)"
},
{
PCIVENDOR_NDC, PCIDEVICE_NCP130_ASIC,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"NDC Netblaster II PCI(TMC7160)"
},
{
PCIVENDOR_3COM, PCIDEVICE_AIRCONNECT,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
/* Driver data, we just put the name here */
(unsigned long)"3Com AirConnect PCI 802.11b 11Mb/s WLAN Controller"
},
{
0, 0, 0, 0, 0, 0, 0
}
};
MODULE_DEVICE_TABLE(pci, plx_id_tbl);
/* Function declared here because of ptr reference below */
static int __devinit prism2sta_probe_plx(struct pci_dev *pdev,
const struct pci_device_id *);
static void __devexit prism2sta_remove_plx(struct pci_dev *pdev);
static struct pci_driver prism2_plx_drv_id = {
.name = "prism2_plx",
.id_table = plx_id_tbl,
.probe = prism2sta_probe_plx,
.remove = prism2sta_remove_plx,
#ifdef CONFIG_PM
.suspend = prism2sta_suspend_pci,
.resume = prism2sta_resume_pci,
#endif
};
#ifdef MODULE
static int __init prism2plx_init(void)
{
WLAN_LOG_NOTICE("%s Loaded\n", version);
return pci_module_init(&prism2_plx_drv_id);
};
static void __exit prism2plx_cleanup(void)
{
pci_unregister_driver(&prism2_plx_drv_id);
};
module_init(prism2plx_init);
module_exit(prism2plx_cleanup);
#endif // MODULE
int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
{
int result = 0;
#define COR_OFFSET 0x3e0 /* COR attribute offset of Prism2 PC card */
#define COR_VALUE 0x41 /* Enable PC card with irq in level trigger */
#define HCR_OFFSET 0x3e2 /* HCR attribute offset of Prism2 PC card */
UINT8 corsave;
DBFENTER;
WLAN_LOG_DEBUG(3, "Doing reset via direct COR access.\n");
/* Collect COR */
corsave = readb(hw->membase + COR_OFFSET);
/* Write reset bit (BIT7) */
writeb(corsave | BIT7, hw->membase + COR_OFFSET);
/* Hold for holdtime */
mdelay(holdtime);
if (genesis) {
writeb(genesis, hw->membase + HCR_OFFSET);
/* Hold for holdtime */
mdelay(holdtime);
}
/* Clear reset bit */
writeb(corsave & ~BIT7, hw->membase + COR_OFFSET);
/* Wait for settletime */
mdelay(settletime);
/* Set non-reset bits back what they were */
writeb(corsave, hw->membase + COR_OFFSET);
DBFEXIT;
return result;
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或