提交 c8f36dc3 编写于 作者: M Mike Frysinger

Blackfin: simplify BF561 coreb driver greatly

Since 90% of this driver can be handled in user space, move it to the
corebld user space application.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
上级 b9ccf14b
......@@ -9,22 +9,9 @@ if (!SMP)
comment "Core B Support"
config BF561_COREB
bool "Enable Core B support"
bool "Enable Core B loader"
default y
config BF561_COREB_RESET
bool "Enable Core B reset support"
default n
help
This requires code in the application that is loaded
into Core B. In order to reset, the application needs
to install an interrupt handler for Supplemental
Interrupt 0, that sets RETI to 0xff600000 and writes
bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.
This causes Core B to stall when Supplemental Interrupt
0 is set, and will reset PC to 0xff600000 when
COREB_SRAM_INIT is cleared.
endif
comment "Interrupt Priority Assignment"
......
/*
* File: arch/blackfin/mach-bf561/coreb.c
* Based on:
* Author:
/* Load firmware into Core B on a BF561
*
* Created:
* Description: Handle CoreB on a BF561
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* The Core B reset func requires code in the application that is loaded into
* Core B. In order to reset, the application needs to install an interrupt
* handler for Supplemental Interrupt 0, that sets RETI to 0xff600000 and
* writes bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0. This causes Core
* B to stall when Supplemental Interrupt 0 is set, and will reset PC to
* 0xff600000 when COREB_SRAM_INIT is cleared.
*/
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/fs.h>
#include <asm/dma.h>
#include <asm/cacheflush.h>
#define MODULE_VER "v0.1"
static spinlock_t coreb_lock;
static wait_queue_head_t coreb_dma_wait;
#define COREB_IS_OPEN 0x00000001
#define COREB_IS_RUNNING 0x00000010
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#define CMD_COREB_INDEX 1
#define CMD_COREB_START 2
#define CMD_COREB_STOP 3
#define CMD_COREB_RESET 4
#define COREB_MINOR 229
static unsigned long coreb_status = 0;
static unsigned long coreb_base = 0xff600000;
static unsigned long coreb_size = 0x4000;
int coreb_dma_done;
static loff_t coreb_lseek(struct file *file, loff_t offset, int origin);
static ssize_t coreb_read(struct file *file, char *buf, size_t count,
loff_t * ppos);
static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
loff_t * ppos);
static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg);
static int coreb_open(struct inode *inode, struct file *file);
static int coreb_release(struct inode *inode, struct file *file);
static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id)
{
clear_dma_irqstat(CH_MEM_STREAM2_DEST);
coreb_dma_done = 1;
wake_up_interruptible(&coreb_dma_wait);
return IRQ_HANDLED;
}
static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
loff_t * ppos)
{
unsigned long p = *ppos;
ssize_t wrote = 0;
if (p + count > coreb_size)
return -EFAULT;
while (count > 0) {
int len = count;
if (len > PAGE_SIZE)
len = PAGE_SIZE;
coreb_dma_done = 0;
flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
/* Source Channel */
set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
set_dma_x_count(CH_MEM_STREAM2_SRC, len);
set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
set_dma_config(CH_MEM_STREAM2_SRC, 0);
/* Destination Channel */
set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
set_dma_x_count(CH_MEM_STREAM2_DEST, len);
set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
enable_dma(CH_MEM_STREAM2_SRC);
enable_dma(CH_MEM_STREAM2_DEST);
wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
disable_dma(CH_MEM_STREAM2_SRC);
disable_dma(CH_MEM_STREAM2_DEST);
count -= len;
wrote += len;
buf += len;
p += len;
}
*ppos = p;
return wrote;
}
static ssize_t coreb_read(struct file *file, char *buf, size_t count,
loff_t * ppos)
{
unsigned long p = *ppos;
ssize_t read = 0;
if ((p + count) > coreb_size)
return -EFAULT;
while (count > 0) {
int len = count;
if (len > PAGE_SIZE)
len = PAGE_SIZE;
coreb_dma_done = 0;
invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
/* Source Channel */
set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
set_dma_x_count(CH_MEM_STREAM2_SRC, len);
set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
set_dma_config(CH_MEM_STREAM2_SRC, 0);
/* Destination Channel */
set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
set_dma_x_count(CH_MEM_STREAM2_DEST, len);
set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
enable_dma(CH_MEM_STREAM2_SRC);
enable_dma(CH_MEM_STREAM2_DEST);
wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
disable_dma(CH_MEM_STREAM2_SRC);
disable_dma(CH_MEM_STREAM2_DEST);
count -= len;
read += len;
buf += len;
p += len;
}
return read;
}
static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
static int
coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
loff_t ret;
mutex_lock(&file->f_dentry->d_inode->i_mutex);
switch (origin) {
case 0 /* SEEK_SET */ :
if (offset < coreb_size) {
file->f_pos = offset;
ret = file->f_pos;
} else
ret = -EINVAL;
break;
case 1 /* SEEK_CUR */ :
if ((offset + file->f_pos) < coreb_size) {
file->f_pos += offset;
ret = file->f_pos;
} else
ret = -EINVAL;
default:
ret = -EINVAL;
}
mutex_unlock(&file->f_dentry->d_inode->i_mutex);
return ret;
}
/* No BKL needed here */
static int coreb_open(struct inode *inode, struct file *file)
{
spin_lock_irq(&coreb_lock);
if (coreb_status & COREB_IS_OPEN)
goto out_busy;
coreb_status |= COREB_IS_OPEN;
spin_unlock_irq(&coreb_lock);
return 0;
out_busy:
spin_unlock_irq(&coreb_lock);
return -EBUSY;
}
static int coreb_release(struct inode *inode, struct file *file)
{
spin_lock_irq(&coreb_lock);
coreb_status &= ~COREB_IS_OPEN;
spin_unlock_irq(&coreb_lock);
return 0;
}
static int coreb_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
int retval = 0;
int coreb_index = 0;
int ret = 0;
switch (cmd) {
case CMD_COREB_INDEX:
if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) {
retval = -EFAULT;
break;
}
spin_lock_irq(&coreb_lock);
switch (coreb_index) {
case 0:
coreb_base = 0xff600000;
coreb_size = 0x4000;
break;
case 1:
coreb_base = 0xff610000;
coreb_size = 0x4000;
break;
case 2:
coreb_base = 0xff500000;
coreb_size = 0x8000;
break;
case 3:
coreb_base = 0xff400000;
coreb_size = 0x8000;
break;
default:
retval = -EINVAL;
break;
}
spin_unlock_irq(&coreb_lock);
mutex_lock(&file->f_dentry->d_inode->i_mutex);
file->f_pos = 0;
mutex_unlock(&file->f_dentry->d_inode->i_mutex);
break;
case CMD_COREB_START:
spin_lock_irq(&coreb_lock);
if (coreb_status & COREB_IS_RUNNING) {
retval = -EBUSY;
break;
}
printk(KERN_INFO "Starting Core B\n");
coreb_status |= COREB_IS_RUNNING;
bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
SSYNC();
spin_unlock_irq(&coreb_lock);
break;
#if defined(CONFIG_BF561_COREB_RESET)
case CMD_COREB_STOP:
spin_lock_irq(&coreb_lock);
printk(KERN_INFO "Stopping Core B\n");
bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
coreb_status &= ~COREB_IS_RUNNING;
spin_unlock_irq(&coreb_lock);
break;
case CMD_COREB_RESET:
printk(KERN_INFO "Resetting Core B\n");
bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
break;
#endif
default:
ret = -EINVAL;
break;
}
return retval;
CSYNC();
return ret;
}
static struct file_operations coreb_fops = {
.owner = THIS_MODULE,
.llseek = coreb_lseek,
.read = coreb_read,
.write = coreb_write,
.ioctl = coreb_ioctl,
.open = coreb_open,
.release = coreb_release
.owner = THIS_MODULE,
.ioctl = coreb_ioctl,
};
static struct miscdevice coreb_dev = {
COREB_MINOR,
"coreb",
&coreb_fops
.minor = MISC_DYNAMIC_MINOR,
.name = "coreb",
.fops = &coreb_fops,
};
static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf)
static int __init bf561_coreb_init(void)
{
return sprintf(buf,
"Base Address:\t0x%08lx\n"
"Core B is %s\n"
"SICA_SYSCR:\t%04x\n"
"SICB_SYSCR:\t%04x\n"
"\n"
"IRQ Status:\tCore A\t\tCore B\n"
"ISR0:\t\t%08x\t\t%08x\n"
"ISR1:\t\t%08x\t\t%08x\n"
"IMASK0:\t\t%08x\t\t%08x\n"
"IMASK1:\t\t%08x\t\t%08x\n",
coreb_base,
coreb_status & COREB_IS_RUNNING ? "running" : "stalled",
bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(),
bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(),
bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(),
bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(),
bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1());
}
static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL);
int __init bf561_coreb_init(void)
{
init_waitqueue_head(&coreb_dma_wait);
spin_lock_init(&coreb_lock);
/* Request the core memory regions for Core B */
if (request_mem_region(0xff600000, 0x4000,
"Core B - Instruction SRAM") == NULL)
goto exit;
if (request_mem_region(0xFF610000, 0x4000,
"Core B - Instruction SRAM") == NULL)
goto release_instruction_a_sram;
if (request_mem_region(0xFF500000, 0x8000,
"Core B - Data Bank B SRAM") == NULL)
goto release_instruction_b_sram;
if (request_mem_region(0xff400000, 0x8000,
"Core B - Data Bank A SRAM") == NULL)
goto release_data_b_sram;
if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0)
goto release_data_a_sram;
if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0)
goto release_dma_dest;
set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL);
misc_register(&coreb_dev);
if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status))
goto release_dma_src;
printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
return 0;
release_dma_src:
free_dma(CH_MEM_STREAM2_SRC);
release_dma_dest:
free_dma(CH_MEM_STREAM2_DEST);
release_data_a_sram:
release_mem_region(0xff400000, 0x8000);
release_data_b_sram:
release_mem_region(0xff500000, 0x8000);
release_instruction_b_sram:
release_mem_region(0xff610000, 0x4000);
release_instruction_a_sram:
release_mem_region(0xff600000, 0x4000);
exit:
return -ENOMEM;
return misc_register(&coreb_dev);
}
module_init(bf561_coreb_init);
void __exit bf561_coreb_exit(void)
static void __exit bf561_coreb_exit(void)
{
device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status);
misc_deregister(&coreb_dev);
release_mem_region(0xff610000, 0x4000);
release_mem_region(0xff600000, 0x4000);
release_mem_region(0xff500000, 0x8000);
release_mem_region(0xff400000, 0x8000);
free_dma(CH_MEM_STREAM2_DEST);
free_dma(CH_MEM_STREAM2_SRC);
}
module_init(bf561_coreb_init);
module_exit(bf561_coreb_exit);
MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册