Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "An update to Synaptics PS/2 driver to handle "ForcePads" (currently
  found in HP EliteBook 1040 laptops), a change for Elan PS/2 driver to
  detect newer touchpads, bunch of devices get annotated as Trackpoint
  and/or Pointer to help userspace classify and handle them, plus
  assorted driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: serport - add compat handling for SPIOCSTYPE ioctl
  Input: atmel_mxt_ts - fix double free of input device
  Input: synaptics - add support for ForcePads
  Input: matrix_keypad - use request_any_context_irq()
  Input: atmel_mxt_ts - downgrade warning about empty interrupts
  Input: wm971x - fix typo in module parameter description
  Input: cap1106 - fix register definition
  Input: add missing POINTER / DIRECT properties to a bunch of drivers
  Input: add INPUT_PROP_POINTING_STICK property
  Input: elantech - fix detection of touchpad on ASUS s301l

drivers/input/keyboard/cap1106.c

@@ -33,8 +33,8 @@
 #define CAP1106_REG_SENSOR_CONFIG	0x22
 #define CAP1106_REG_SENSOR_CONFIG2	0x23
 #define CAP1106_REG_SAMPLING_CONFIG	0x24
-#define CAP1106_REG_CALIBRATION		0x25
-#define CAP1106_REG_INT_ENABLE		0x26
+#define CAP1106_REG_CALIBRATION		0x26
+#define CAP1106_REG_INT_ENABLE		0x27
 #define CAP1106_REG_REPEAT_RATE		0x28
 #define CAP1106_REG_MT_CONFIG		0x2a
 #define CAP1106_REG_MT_PATTERN_CONFIG	0x2b

drivers/input/keyboard/matrix_keypad.c

@@ -332,23 +332,24 @@ static int matrix_keypad_init_gpio(struct platform_device *pdev,
 	}
 
 	if (pdata->clustered_irq > 0) {
-		err = request_irq(pdata->clustered_irq,
+		err = request_any_context_irq(pdata->clustered_irq,
 				matrix_keypad_interrupt,
 				pdata->clustered_irq_flags,
 				"matrix-keypad", keypad);
-		if (err) {
+		if (err < 0) {
 			dev_err(&pdev->dev,
 				"Unable to acquire clustered interrupt\n");
 			goto err_free_rows;
 		}
 	} else {
 		for (i = 0; i < pdata->num_row_gpios; i++) {
-			err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+			err = request_any_context_irq(
+					gpio_to_irq(pdata->row_gpios[i]),
 					matrix_keypad_interrupt,
 					IRQF_TRIGGER_RISING |
 					IRQF_TRIGGER_FALLING,
 					"matrix-keypad", keypad);
-			if (err) {
+			if (err < 0) {
 				dev_err(&pdev->dev,
 					"Unable to acquire interrupt for GPIO line %i\n",
 					pdata->row_gpios[i]);

drivers/input/mouse/alps.c

@@ -2373,6 +2373,10 @@ int alps_init(struct psmouse *psmouse)
 	dev2->keybit[BIT_WORD(BTN_LEFT)] =
 		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
 
+	__set_bit(INPUT_PROP_POINTER, dev2->propbit);
+	if (priv->flags & ALPS_DUALPOINT)
+		__set_bit(INPUT_PROP_POINTING_STICK, dev2->propbit);
+
 	if (input_register_device(priv->dev2))
 		goto init_fail;
 

drivers/input/mouse/elantech.c

@@ -1331,6 +1331,13 @@ static bool elantech_is_signature_valid(const unsigned char *param)
 	if (param[1] == 0)
 		return true;
 
+	/*
+	 * Some models have a revision higher then 20. Meaning param[2] may
+	 * be 10 or 20, skip the rates check for these.
+	 */
+	if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40)
+		return true;
+
 	for (i = 0; i < ARRAY_SIZE(rates); i++)
 		if (param[2] == rates[i])
 			return false;
@@ -1607,6 +1614,10 @@ int elantech_init(struct psmouse *psmouse)
 		tp_dev->keybit[BIT_WORD(BTN_LEFT)] =
 			BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) |
 			BIT_MASK(BTN_RIGHT);
+
+		__set_bit(INPUT_PROP_POINTER, tp_dev->propbit);
+		__set_bit(INPUT_PROP_POINTING_STICK, tp_dev->propbit);
+
 		error = input_register_device(etd->tp_dev);
 		if (error < 0)
 			goto init_fail_tp_reg;

drivers/input/mouse/psmouse-base.c

@@ -670,6 +670,8 @@ static void psmouse_apply_defaults(struct psmouse *psmouse)
 	__set_bit(REL_X, input_dev->relbit);
 	__set_bit(REL_Y, input_dev->relbit);
 
+	__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
 	psmouse->set_rate = psmouse_set_rate;
 	psmouse->set_resolution = psmouse_set_resolution;
 	psmouse->poll = psmouse_poll;

drivers/input/mouse/synaptics.c

@@ -629,10 +629,61 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 			 ((buf[0] & 0x04) >> 1) |
 			 ((buf[3] & 0x04) >> 2));
 
+		if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+			SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
+		    hw->w == 2) {
+			synaptics_parse_agm(buf, priv, hw);
+			return 1;
+		}
+
+		hw->x = (((buf[3] & 0x10) << 8) |
+			 ((buf[1] & 0x0f) << 8) |
+			 buf[4]);
+		hw->y = (((buf[3] & 0x20) << 7) |
+			 ((buf[1] & 0xf0) << 4) |
+			 buf[5]);
+		hw->z = buf[2];
+
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
-		if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+		if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
+			/*
+			 * ForcePads, like Clickpads, use middle button
+			 * bits to report primary button clicks.
+			 * Unfortunately they report primary button not
+			 * only when user presses on the pad above certain
+			 * threshold, but also when there are more than one
+			 * finger on the touchpad, which interferes with
+			 * out multi-finger gestures.
+			 */
+			if (hw->z == 0) {
+				/* No contacts */
+				priv->press = priv->report_press = false;
+			} else if (hw->w >= 4 && ((buf[0] ^ buf[3]) & 0x01)) {
+				/*
+				 * Single-finger touch with pressure above
+				 * the threshold. If pressure stays long
+				 * enough, we'll start reporting primary
+				 * button. We rely on the device continuing
+				 * sending data even if finger does not
+				 * move.
+				 */
+				if  (!priv->press) {
+					priv->press_start = jiffies;
+					priv->press = true;
+				} else if (time_after(jiffies,
+						priv->press_start +
+							msecs_to_jiffies(50))) {
+					priv->report_press = true;
+				}
+			} else {
+				priv->press = false;
+			}
+
+			hw->left = priv->report_press;
+
+		} else if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
 			/*
 			 * Clickpad's button is transmitted as middle button,
 			 * however, since it is primary button, we will report
@@ -651,21 +702,6 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 			hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
 		}
 
-		if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
-			SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
-		    hw->w == 2) {
-			synaptics_parse_agm(buf, priv, hw);
-			return 1;
-		}
-
-		hw->x = (((buf[3] & 0x10) << 8) |
-			 ((buf[1] & 0x0f) << 8) |
-			 buf[4]);
-		hw->y = (((buf[3] & 0x20) << 7) |
-			 ((buf[1] & 0xf0) << 4) |
-			 buf[5]);
-		hw->z = buf[2];
-
 		if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
 		    ((buf[0] ^ buf[3]) & 0x02)) {
 			switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {

drivers/input/mouse/synaptics.h

@@ -78,6 +78,11 @@
  * 2	0x08	image sensor		image sensor tracks 5 fingers, but only
  *					reports 2.
  * 2	0x20	report min		query 0x0f gives min coord reported
+ * 2	0x80	forcepad		forcepad is a variant of clickpad that
+ *					does not have physical buttons but rather
+ *					uses pressure above certain threshold to
+ *					report primary clicks. Forcepads also have
+ *					clickpad bit set.
  */
 #define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
 #define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
@@ -86,6 +91,7 @@
 #define SYN_CAP_ADV_GESTURE(ex0c)	((ex0c) & 0x080000)
 #define SYN_CAP_REDUCED_FILTERING(ex0c)	((ex0c) & 0x000400)
 #define SYN_CAP_IMAGE_SENSOR(ex0c)	((ex0c) & 0x000800)
+#define SYN_CAP_FORCEPAD(ex0c)		((ex0c) & 0x008000)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -177,6 +183,11 @@ struct synaptics_data {
 	 */
 	struct synaptics_hw_state agm;
 	bool agm_pending;			/* new AGM packet received */
+
+	/* ForcePad handling */
+	unsigned long				press_start;
+	bool					press;
+	bool					report_press;
 };
 
 void synaptics_module_init(void);

drivers/input/mouse/synaptics_usb.c

@@ -387,6 +387,7 @@ static int synusb_probe(struct usb_interface *intf,
 		__set_bit(EV_REL, input_dev->evbit);
 		__set_bit(REL_X, input_dev->relbit);
 		__set_bit(REL_Y, input_dev->relbit);
+		__set_bit(INPUT_PROP_POINTING_STICK, input_dev->propbit);
 		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 127, 0, 0);
 	} else {
 		input_set_abs_params(input_dev, ABS_X,
@@ -401,6 +402,11 @@ static int synusb_probe(struct usb_interface *intf,
 		__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
 	}
 
+	if (synusb->flags & SYNUSB_TOUCHSCREEN)
+		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+	else
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
 	__set_bit(BTN_LEFT, input_dev->keybit);
 	__set_bit(BTN_RIGHT, input_dev->keybit);
 	__set_bit(BTN_MIDDLE, input_dev->keybit);

drivers/input/mouse/trackpoint.c

@@ -393,6 +393,9 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
 	if ((button_info & 0x0f) >= 3)
 		__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 
+	__set_bit(INPUT_PROP_POINTER, psmouse->dev->propbit);
+	__set_bit(INPUT_PROP_POINTING_STICK, psmouse->dev->propbit);
+
 	trackpoint_defaults(psmouse->private);
 
 	error = trackpoint_power_on_reset(&psmouse->ps2dev);

drivers/input/serio/serport.c

@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/serio.h>
 #include <linux/tty.h>
+#include <linux/compat.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Input device TTY line discipline");
@@ -198,28 +199,55 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
 	return 0;
 }
 
+static void serport_set_type(struct tty_struct *tty, unsigned long type)
+{
+	struct serport *serport = tty->disc_data;
+
+	serport->id.proto = type & 0x000000ff;
+	serport->id.id    = (type & 0x0000ff00) >> 8;
+	serport->id.extra = (type & 0x00ff0000) >> 16;
+}
+
 /*
  * serport_ldisc_ioctl() allows to set the port protocol, and device ID
  */
 
-static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int serport_ldisc_ioctl(struct tty_struct *tty, struct file *file,
+			       unsigned int cmd, unsigned long arg)
 {
-	struct serport *serport = (struct serport*) tty->disc_data;
-	unsigned long type;
-
 	if (cmd == SPIOCSTYPE) {
+		unsigned long type;
+
 		if (get_user(type, (unsigned long __user *) arg))
 			return -EFAULT;
 
-		serport->id.proto = type & 0x000000ff;
-		serport->id.id	  = (type & 0x0000ff00) >> 8;
-		serport->id.extra = (type & 0x00ff0000) >> 16;
+		serport_set_type(tty, type);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_SPIOCSTYPE	_IOW('q', 0x01, compat_ulong_t)
+static long serport_ldisc_compat_ioctl(struct tty_struct *tty,
+				       struct file *file,
+				       unsigned int cmd, unsigned long arg)
+{
+	if (cmd == COMPAT_SPIOCSTYPE) {
+		void __user *uarg = compat_ptr(arg);
+		compat_ulong_t compat_type;
+
+		if (get_user(compat_type, (compat_ulong_t __user *)uarg))
+			return -EFAULT;
 
+		serport_set_type(tty, compat_type);
 		return 0;
 	}
 
 	return -EINVAL;
 }
+#endif
 
 static void serport_ldisc_write_wakeup(struct tty_struct * tty)
 {
@@ -243,6 +271,9 @@ static struct tty_ldisc_ops serport_ldisc = {
 	.close =	serport_ldisc_close,
 	.read =		serport_ldisc_read,
 	.ioctl =	serport_ldisc_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	serport_ldisc_compat_ioctl,
+#endif
 	.receive_buf =	serport_ldisc_receive,
 	.write_wakeup =	serport_ldisc_write_wakeup
 };

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -837,7 +837,12 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 	count = data->msg_buf[0];
 
 	if (count == 0) {
-		dev_warn(dev, "Interrupt triggered but zero messages\n");
+		/*
+		 * This condition is caused by the CHG line being configured
+		 * in Mode 0. It results in unnecessary I2C operations but it
+		 * is benign.
+		 */
+		dev_dbg(dev, "Interrupt triggered but zero messages\n");
 		return IRQ_NONE;
 	} else if (count > data->max_reportid) {
 		dev_err(dev, "T44 count %d exceeded max report id\n", count);
@@ -1374,11 +1379,16 @@ static int mxt_get_info(struct mxt_data *data)
 	return 0;
 }
 
-static void mxt_free_object_table(struct mxt_data *data)
+static void mxt_free_input_device(struct mxt_data *data)
 {
-	input_unregister_device(data->input_dev);
-	data->input_dev = NULL;
+	if (data->input_dev) {
+		input_unregister_device(data->input_dev);
+		data->input_dev = NULL;
+	}
+}
 
+static void mxt_free_object_table(struct mxt_data *data)
+{
 	kfree(data->object_table);
 	data->object_table = NULL;
 	kfree(data->msg_buf);
@@ -1957,11 +1967,13 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		ret = mxt_lookup_bootloader_address(data, 0);
 		if (ret)
 			goto release_firmware;
+
+		mxt_free_input_device(data);
+		mxt_free_object_table(data);
 	} else {
 		enable_irq(data->irq);
 	}
 
-	mxt_free_object_table(data);
 	reinit_completion(&data->bl_completion);
 
 	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
@@ -2210,6 +2222,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	return 0;
 
 err_free_object:
+	mxt_free_input_device(data);
 	mxt_free_object_table(data);
 err_free_irq:
 	free_irq(client->irq, data);
@@ -2224,7 +2237,7 @@ static int mxt_remove(struct i2c_client *client)
 
 	sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
 	free_irq(data->irq, data);
-	input_unregister_device(data->input_dev);
+	mxt_free_input_device(data);
 	mxt_free_object_table(data);
 	kfree(data);
 

drivers/input/touchscreen/wm9712.c

@@ -41,7 +41,7 @@
  */
 static int rpu = 8;
 module_param(rpu, int, 0);
-MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
 
 /*
  * Set current used for pressure measurement.

drivers/input/touchscreen/wm9713.c

@@ -41,7 +41,7 @@
  */
 static int rpu = 8;
 module_param(rpu, int, 0);
-MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
 
 /*
  * Set current used for pressure measurement.

include/uapi/linux/input.h

@@ -165,6 +165,7 @@ struct input_keymap_entry {
 #define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
 #define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
 #define INPUT_PROP_TOPBUTTONPAD		0x04	/* softbuttons at top of pad */
+#define INPUT_PROP_POINTING_STICK	0x05	/* is a pointing stick */
 
 #define INPUT_PROP_MAX			0x1f
 #define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)