regulator: core: Allow specify apply_[reg|bit] for regmap based voltage_sel operations

Some DVM regulators needs to update apply_bit after setting vsel_reg to
initiate voltage change on the output.  This patch adds apply_reg and
apply_bit to struct regulator_desc and update
regulator_set_voltage_sel_regmap() to set apply_bit of apply_reg when
apply_bit is set.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/core.c

@@ -2074,10 +2074,20 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
  */
 int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
 {
+	int ret;
+
 	sel <<= ffs(rdev->desc->vsel_mask) - 1;
 
-	return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+	ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
 				  rdev->desc->vsel_mask, sel);
+	if (ret)
+		return ret;
+
+	if (rdev->desc->apply_bit)
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+					 rdev->desc->apply_bit,
+					 rdev->desc->apply_bit);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);
 

include/linux/regulator/driver.h

@@ -193,6 +193,10 @@ enum regulator_type {
  *
  * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
  * @vsel_mask: Mask for register bitfield used for selector
+ * @apply_reg: Register for initiate voltage change on the output when
+ *                using regulator_set_voltage_sel_regmap
+ * @apply_bit: Register bitfield used for initiate voltage change on the
+ *                output when using regulator_set_voltage_sel_regmap
  * @enable_reg: Register for control when using regmap enable/disable ops
  * @enable_mask: Mask for control when using regmap enable/disable ops
  *
@@ -218,6 +222,8 @@ struct regulator_desc {
 
 	unsigned int vsel_reg;
 	unsigned int vsel_mask;
+	unsigned int apply_reg;
+	unsigned int apply_bit;
 	unsigned int enable_reg;
 	unsigned int enable_mask;
 	unsigned int bypass_reg;