net: mvpp2: do not select the internal source clock

This patch stops the internal MAC Tx clock from being enabled as the
internal clock isn't used. The definition used for the bit controlling
this behaviour is renamed as well as it was wrongly named (bit 4 of
GMAC_CTRL_2_REG).

Fixes: 3919357f ("net: mvpp2: initialize the GMAC when using a port")
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/mvpp2.c

@@ -333,7 +333,7 @@
 #define     MVPP2_GMAC_INBAND_AN_MASK		BIT(0)
 #define     MVPP2_GMAC_FLOW_CTRL_MASK		GENMASK(2, 1)
 #define     MVPP2_GMAC_PCS_ENABLE_MASK		BIT(3)
-#define     MVPP2_GMAC_PORT_RGMII_MASK		BIT(4)
+#define     MVPP2_GMAC_INTERNAL_CLK_MASK	BIT(4)
 #define     MVPP2_GMAC_DISABLE_PADDING		BIT(5)
 #define     MVPP2_GMAC_PORT_RESET_MASK		BIT(6)
 #define MVPP2_GMAC_AUTONEG_CONFIG		0xc
@@ -4599,7 +4599,6 @@ static void mvpp2_port_mii_gmac_configure(struct mvpp2_port *port)
 	        val |= MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PCS_ENABLE_MASK;
 	} else if (phy_interface_mode_is_rgmii(port->phy_interface)) {
 		val &= ~MVPP2_GMAC_PCS_ENABLE_MASK;
-		val |= MVPP2_GMAC_PORT_RGMII_MASK;
 	}
 	writel(val, port->base + MVPP2_GMAC_CTRL_2_REG);