Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Documentation/DocBook/80211.tmpl

@@ -98,6 +98,8 @@
 !Finclude/net/cfg80211.h priv_to_wiphy
 !Finclude/net/cfg80211.h set_wiphy_dev
 !Finclude/net/cfg80211.h wdev_priv
+!Finclude/net/cfg80211.h ieee80211_iface_limit
+!Finclude/net/cfg80211.h ieee80211_iface_combination
       </chapter>
       <chapter>
       <title>Actions and configuration</title>

drivers/net/wireless/iwlwifi/mvm/mac80211.c

@@ -1746,14 +1746,16 @@ static int iwl_mvm_mac_sched_scan_start(struct ieee80211_hw *hw,
 	return ret;
 }
 
-static void iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif)
+static int iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif)
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 
 	mutex_lock(&mvm->mutex);
 	iwl_mvm_sched_scan_stop(mvm);
 	mutex_unlock(&mvm->mutex);
+
+	return 0;
 }
 
 static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw,

drivers/net/wireless/mac80211_hwsim.c

@@ -411,6 +411,7 @@ struct mac80211_hwsim_data {
 
 	struct mac_address addresses[2];
 	int channels, idx;
+	bool use_chanctx;
 
 	struct ieee80211_channel *tmp_chan;
 	struct delayed_work roc_done;
@@ -1088,7 +1089,7 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
 		return;
 	}
 
-	if (data->channels == 1) {
+	if (!data->use_chanctx) {
 		channel = data->channel;
 	} else if (txi->hw_queue == 4) {
 		channel = data->tmp_chan;
@@ -1354,7 +1355,7 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 
 	data->channel = conf->chandef.chan;
 
-	WARN_ON(data->channel && data->channels > 1);
+	WARN_ON(data->channel && data->use_chanctx);
 
 	data->power_level = conf->power_level;
 	if (!data->started || !data->beacon_int)
@@ -1940,7 +1941,8 @@ static struct ieee80211_ops mac80211_hwsim_mchan_ops;
 
 static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 				       const struct ieee80211_regdomain *regd,
-				       bool reg_strict, bool p2p_device)
+				       bool reg_strict, bool p2p_device,
+				       bool use_chanctx)
 {
 	int err;
 	u8 addr[ETH_ALEN];
@@ -1950,11 +1952,14 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 	const struct ieee80211_ops *ops = &mac80211_hwsim_ops;
 	int idx;
 
+	if (WARN_ON(channels > 1 && !use_chanctx))
+		return -EINVAL;
+
 	spin_lock_bh(&hwsim_radio_lock);
 	idx = hwsim_radio_idx++;
 	spin_unlock_bh(&hwsim_radio_lock);
 
-	if (channels > 1)
+	if (use_chanctx)
 		ops = &mac80211_hwsim_mchan_ops;
 	hw = ieee80211_alloc_hw(sizeof(*data), ops);
 	if (!hw) {
@@ -1995,20 +2000,21 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 	hw->wiphy->addresses = data->addresses;
 
 	data->channels = channels;
+	data->use_chanctx = use_chanctx;
 	data->idx = idx;
 
-	if (data->channels > 1) {
+	if (data->use_chanctx) {
 		hw->wiphy->max_scan_ssids = 255;
 		hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
 		hw->wiphy->max_remain_on_channel_duration = 1000;
 		/* For channels > 1 DFS is not allowed */
 		hw->wiphy->n_iface_combinations = 1;
 		hw->wiphy->iface_combinations = &data->if_combination;
-		data->if_combination.num_different_channels = data->channels;
 		if (p2p_device)
 			data->if_combination = hwsim_if_comb_p2p_dev[0];
 		else
 			data->if_combination = hwsim_if_comb[0];
+		data->if_combination.num_different_channels = data->channels;
 	} else if (p2p_device) {
 		hw->wiphy->iface_combinations = hwsim_if_comb_p2p_dev;
 		hw->wiphy->n_iface_combinations =
@@ -2156,7 +2162,7 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 	debugfs_create_file("ps", 0666, data->debugfs, data, &hwsim_fops_ps);
 	debugfs_create_file("group", 0666, data->debugfs, data,
 			    &hwsim_fops_group);
-	if (data->channels == 1)
+	if (!data->use_chanctx)
 		debugfs_create_file("dfs_simulate_radar", 0222,
 				    data->debugfs,
 				    data, &hwsim_simulate_radar);
@@ -2423,10 +2429,16 @@ static int hwsim_create_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	const struct ieee80211_regdomain *regd = NULL;
 	bool reg_strict = info->attrs[HWSIM_ATTR_REG_STRICT_REG];
 	bool p2p_device = info->attrs[HWSIM_ATTR_SUPPORT_P2P_DEVICE];
+	bool use_chanctx;
 
 	if (info->attrs[HWSIM_ATTR_CHANNELS])
 		chans = nla_get_u32(info->attrs[HWSIM_ATTR_CHANNELS]);
 
+	if (info->attrs[HWSIM_ATTR_USE_CHANCTX])
+		use_chanctx = true;
+	else
+		use_chanctx = (chans > 1);
+
 	if (info->attrs[HWSIM_ATTR_REG_HINT_ALPHA2])
 		alpha2 = nla_data(info->attrs[HWSIM_ATTR_REG_HINT_ALPHA2]);
 
@@ -2439,7 +2451,7 @@ static int hwsim_create_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	}
 
 	return mac80211_hwsim_create_radio(chans, alpha2, regd, reg_strict,
-					   p2p_device);
+					   p2p_device, use_chanctx);
 }
 
 static int hwsim_destroy_radio_nl(struct sk_buff *msg, struct genl_info *info)
@@ -2658,7 +2670,8 @@ static int __init init_mac80211_hwsim(void)
 
 		err = mac80211_hwsim_create_radio(channels, reg_alpha2,
 						  regd, reg_strict,
-						  support_p2p_device);
+						  support_p2p_device,
+						  channels > 1);
 		if (err < 0)
 			goto out_free_radios;
 	}

drivers/net/wireless/mac80211_hwsim.h

@@ -108,6 +108,9 @@ enum {
  * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute)
  * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute)
  * @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag)
+ * @HWSIM_ATTR_USE_CHANCTX: used with the %HWSIM_CMD_CREATE_RADIO
+ *	command to force use of channel contexts even when only a
+ *	single channel is supported
  * @__HWSIM_ATTR_MAX: enum limit
  */
 
@@ -128,6 +131,7 @@ enum {
 	HWSIM_ATTR_REG_CUSTOM_REG,
 	HWSIM_ATTR_REG_STRICT_REG,
 	HWSIM_ATTR_SUPPORT_P2P_DEVICE,
+	HWSIM_ATTR_USE_CHANCTX,
 	__HWSIM_ATTR_MAX,
 };
 #define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)

drivers/net/wireless/mwifiex/cfg80211.c

@@ -2600,8 +2600,8 @@ static int mwifiex_cfg80211_set_coalesce(struct wiphy *wiphy,
 static int
 mwifiex_cfg80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
 			   u8 *peer, u8 action_code, u8 dialog_token,
-			   u16 status_code, const u8 *extra_ies,
-			   size_t extra_ies_len)
+			   u16 status_code, u32 peer_capability,
+			   const u8 *extra_ies, size_t extra_ies_len)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 	int ret;

drivers/net/wireless/ti/wlcore/main.c

@@ -3668,8 +3668,8 @@ static int wl1271_op_sched_scan_start(struct ieee80211_hw *hw,
 	return ret;
 }
 
-static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
-				      struct ieee80211_vif *vif)
+static int wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif)
 {
 	struct wl1271 *wl = hw->priv;
 	struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
@@ -3691,6 +3691,8 @@ static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
 	wl1271_ps_elp_sleep(wl);
 out:
 	mutex_unlock(&wl->mutex);
+
+	return 0;
 }
 
 static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)

include/net/cfg80211.h

@@ -2206,7 +2206,12 @@ struct cfg80211_qos_map {
  * @set_cqm_txe_config: Configure connection quality monitor TX error
  *	thresholds.
  * @sched_scan_start: Tell the driver to start a scheduled scan.
- * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan.
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This
+ *	call must stop the scheduled scan and be ready for starting a new one
+ *	before it returns, i.e. @sched_scan_start may be called immediately
+ *	after that again and should not fail in that case. The driver should
+ *	not call cfg80211_sched_scan_stopped() for a requested stop (when this
+ *	method returns 0.)
  *
  * @mgmt_frame_register: Notify driver that a management frame type was
  *	registered. Note that this callback may not sleep, and cannot run
@@ -2465,7 +2470,8 @@ struct cfg80211_ops {
 
 	int	(*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
 			     u8 *peer, u8 action_code,  u8 dialog_token,
-			     u16 status_code, const u8 *buf, size_t len);
+			     u16 status_code, u32 peer_capability,
+			     const u8 *buf, size_t len);
 	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
 			     u8 *peer, enum nl80211_tdls_operation oper);
 
@@ -2610,9 +2616,12 @@ struct ieee80211_iface_limit {
  *	only in special cases.
  * @radar_detect_widths: bitmap of channel widths supported for radar detection
  *
- * These examples can be expressed as follows:
+ * With this structure the driver can describe which interface
+ * combinations it supports concurrently.
  *
- * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
+ * Examples:
+ *
+ * 1. Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
  *
  *  struct ieee80211_iface_limit limits1[] = {
  *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
@@ -2626,7 +2635,7 @@ struct ieee80211_iface_limit {
  *  };
  *
  *
- * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
+ * 2. Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
  *
  *  struct ieee80211_iface_limit limits2[] = {
  *	{ .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
@@ -2640,7 +2649,8 @@ struct ieee80211_iface_limit {
  *  };
  *
  *
- * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ * 3. Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ *
  * This allows for an infrastructure connection and three P2P connections.
  *
  *  struct ieee80211_iface_limit limits3[] = {
@@ -2790,7 +2800,7 @@ struct wiphy_vendor_command {
  * @perm_addr: permanent MAC address of this device
  * @addr_mask: If the device supports multiple MAC addresses by masking,
  *	set this to a mask with variable bits set to 1, e.g. if the last
- *	four bits are variable then set it to 00:...:00:0f. The actual
+ *	four bits are variable then set it to 00-00-00-00-00-0f. The actual
  *	variable bits shall be determined by the interfaces added, with
  *	interfaces not matching the mask being rejected to be brought up.
  * @n_addresses: number of addresses in @addresses.

include/net/mac80211.h

@@ -66,10 +66,6 @@
  *
  * Secondly, when the hardware handles fragmentation, the frame handed to
  * the driver from mac80211 is the MSDU, not the MPDU.
- *
- * Finally, for received frames, the driver is able to indicate that it has
- * filled a radiotap header and put that in front of the frame; if it does
- * not do so then mac80211 may add this under certain circumstances.
  */
 
 /**
@@ -1507,8 +1503,6 @@ struct ieee80211_tx_control {
  * @IEEE80211_HW_CONNECTION_MONITOR:
  *	The hardware performs its own connection monitoring, including
  *	periodic keep-alives to the AP and probing the AP on beacon loss.
- *	When this flag is set, signaling beacon-loss will cause an immediate
- *	change to disassociated state.
  *
  * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC:
  *	This device needs to get data from beacon before association (i.e.
@@ -1644,10 +1638,6 @@ enum ieee80211_hw_flags {
  *	the hw can report back.
  * @max_rate_tries: maximum number of tries for each stage
  *
- * @napi_weight: weight used for NAPI polling.  You must specify an
- *	appropriate value here if a napi_poll operation is provided
- *	by your driver.
- *
  * @max_rx_aggregation_subframes: maximum buffer size (number of
  *	sub-frames) to be used for A-MPDU block ack receiver
  *	aggregation.
@@ -1701,7 +1691,6 @@ struct ieee80211_hw {
 	int vif_data_size;
 	int sta_data_size;
 	int chanctx_data_size;
-	int napi_weight;
 	u16 queues;
 	u16 max_listen_interval;
 	s8 max_signal;
@@ -2471,6 +2460,7 @@ enum ieee80211_roc_type {
  *	This process will continue until sched_scan_stop is called.
  *
  * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
+ *	In this case, ieee80211_sched_scan_stopped() must not be called.
  *
  * @sw_scan_start: Notifier function that is called just before a software scan
  *	is started. Can be NULL, if the driver doesn't need this notification.
@@ -2624,8 +2614,6 @@ enum ieee80211_roc_type {
  *	callback. They must then call ieee80211_chswitch_done() to indicate
  *	completion of the channel switch.
  *
- * @napi_poll: Poll Rx queue for incoming data frames.
- *
  * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
  *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
  *	reject TX/RX mask combinations they cannot support by returning -EINVAL
@@ -2820,7 +2808,7 @@ struct ieee80211_ops {
 				struct ieee80211_vif *vif,
 				struct cfg80211_sched_scan_request *req,
 				struct ieee80211_sched_scan_ies *ies);
-	void (*sched_scan_stop)(struct ieee80211_hw *hw,
+	int (*sched_scan_stop)(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif);
 	void (*sw_scan_start)(struct ieee80211_hw *hw);
 	void (*sw_scan_complete)(struct ieee80211_hw *hw);
@@ -2884,7 +2872,6 @@ struct ieee80211_ops {
 	void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop);
 	void (*channel_switch)(struct ieee80211_hw *hw,
 			       struct ieee80211_channel_switch *ch_switch);
-	int (*napi_poll)(struct ieee80211_hw *hw, int budget);
 	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
 	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
 
@@ -3166,21 +3153,21 @@ void ieee80211_free_hw(struct ieee80211_hw *hw);
  */
 void ieee80211_restart_hw(struct ieee80211_hw *hw);
 
-/** ieee80211_napi_schedule - schedule NAPI poll
- *
- * Use this function to schedule NAPI polling on a device.
- *
- * @hw: the hardware to start polling
- */
-void ieee80211_napi_schedule(struct ieee80211_hw *hw);
-
-/** ieee80211_napi_complete - complete NAPI polling
- *
- * Use this function to finish NAPI polling on a device.
+/**
+ * ieee80211_napi_add - initialize mac80211 NAPI context
+ * @hw: the hardware to initialize the NAPI context on
+ * @napi: the NAPI context to initialize
+ * @napi_dev: dummy NAPI netdevice, here to not waste the space if the
+ *	driver doesn't use NAPI
+ * @poll: poll function
+ * @weight: default weight
  *
- * @hw: the hardware to stop polling
+ * See also netif_napi_add().
  */
-void ieee80211_napi_complete(struct ieee80211_hw *hw);
+void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
+			struct net_device *napi_dev,
+			int (*poll)(struct napi_struct *, int),
+			int weight);
 
 /**
  * ieee80211_rx - receive frame

include/uapi/linux/nl80211.h

@@ -303,8 +303,9 @@
  *	passed, all channels allowed for the current regulatory domain
  *	are used.  Extra IEs can also be passed from the userspace by
  *	using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
- *	if scheduled scan is not running.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ *	scheduled scan is not running. The caller may assume that as soon
+ *	as the call returns, it is safe to start a new scheduled scan again.
  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
  *	results available.
  * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
@@ -1575,6 +1576,9 @@ enum nl80211_commands {
  *	advertise values that cannot always be met. In such cases, an attempt
  *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
  *
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ *	As specified in the &enum nl80211_tdls_peer_capability.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1908,6 +1912,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_MAX_AP_ASSOC_STA,
 
+	NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2437,10 +2443,7 @@ enum nl80211_reg_type {
  * 	in KHz. This is not a center a frequency but an actual regulatory
  * 	band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- *	frequency range, in KHz. If not present or 0, maximum available
- *	bandwidth should be calculated base on contiguous rules and wider
- *	channels will be allowed to cross multiple contiguous/overlapping
- *	frequency ranges.
+ *	frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
  * 	for a given frequency range. The value is in mBi (100 * dBi).
  * 	If you don't have one then don't send this.
@@ -2511,6 +2514,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
  * 	this includes probe requests or modes of operation that require
  * 	beaconing.
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ *	base on contiguous rules and wider channels will be allowed to cross
+ *	multiple contiguous/overlapping frequency ranges.
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -2522,6 +2528,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_PTMP_ONLY		= 1<<6,
 	NL80211_RRF_NO_IR		= 1<<7,
 	__NL80211_RRF_NO_IBSS		= 1<<8,
+	NL80211_RRF_AUTO_BW		= 1<<11,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -3843,11 +3850,6 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  *	to work properly to suppport receiving regulatory hints from
  *	cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
- *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
- *	in the interface combinations, even when it's only used for scan
- *	and remain-on-channel. This could be due to, for example, the
- *	remain-on-channel implementation requiring a channel context.
  * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
  *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
  *	mode
@@ -3889,7 +3891,7 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_HT_IBSS				= 1 << 1,
 	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
 	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
-	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
+	/* bit 4 is reserved - don't use */
 	NL80211_FEATURE_SAE				= 1 << 5,
 	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
 	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
@@ -4079,4 +4081,20 @@ struct nl80211_vendor_cmd_info {
 	__u32 subcmd;
 };
 
+/**
+ * enum nl80211_tdls_peer_capability - TDLS peer flags.
+ *
+ * Used by tdls_mgmt() to determine which conditional elements need
+ * to be added to TDLS Setup frames.
+ *
+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ */
+enum nl80211_tdls_peer_capability {
+	NL80211_TDLS_PEER_HT = 1<<0,
+	NL80211_TDLS_PEER_VHT = 1<<1,
+	NL80211_TDLS_PEER_WMM = 1<<2,
+};
+
 #endif /* __LINUX_NL80211_H */

net/mac80211/cfg.c

@@ -1347,9 +1347,6 @@ static int sta_apply_parameters(struct ieee80211_local *local,
 						    params->vht_capa, sta);
 
 	if (params->opmode_notif_used) {
-		enum ieee80211_band band =
-			ieee80211_get_sdata_band(sdata);
-
 		/* returned value is only needed for rc update, but the
 		 * rc isn't initialized here yet, so ignore it
 		 */
@@ -3647,8 +3644,8 @@ ieee80211_prep_tdls_direct(struct wiphy *wiphy, struct net_device *dev,
 
 static int ieee80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
 			       u8 *peer, u8 action_code, u8 dialog_token,
-			       u16 status_code, const u8 *extra_ies,
-			       size_t extra_ies_len)
+			       u16 status_code, u32 peer_capability,
+			       const u8 *extra_ies, size_t extra_ies_len)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = sdata->local;

net/mac80211/debugfs_netdev.c

@@ -358,6 +358,18 @@ static ssize_t ieee80211_if_parse_tkip_mic_test(
 }
 IEEE80211_IF_FILE_W(tkip_mic_test);
 
+static ssize_t ieee80211_if_parse_beacon_loss(
+	struct ieee80211_sub_if_data *sdata, const char *buf, int buflen)
+{
+	if (!ieee80211_sdata_running(sdata) || !sdata->vif.bss_conf.assoc)
+		return -ENOTCONN;
+
+	ieee80211_beacon_loss(&sdata->vif);
+
+	return buflen;
+}
+IEEE80211_IF_FILE_W(beacon_loss);
+
 static ssize_t ieee80211_if_fmt_uapsd_queues(
 	const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
 {
@@ -569,6 +581,7 @@ static void add_sta_files(struct ieee80211_sub_if_data *sdata)
 	DEBUGFS_ADD(beacon_timeout);
 	DEBUGFS_ADD_MODE(smps, 0600);
 	DEBUGFS_ADD_MODE(tkip_mic_test, 0200);
+	DEBUGFS_ADD_MODE(beacon_loss, 0200);
 	DEBUGFS_ADD_MODE(uapsd_queues, 0600);
 	DEBUGFS_ADD_MODE(uapsd_max_sp_len, 0600);
 }

net/mac80211/driver-ops.h

@@ -354,16 +354,20 @@ drv_sched_scan_start(struct ieee80211_local *local,
 	return ret;
 }
 
-static inline void drv_sched_scan_stop(struct ieee80211_local *local,
-				       struct ieee80211_sub_if_data *sdata)
+static inline int drv_sched_scan_stop(struct ieee80211_local *local,
+				      struct ieee80211_sub_if_data *sdata)
 {
+	int ret;
+
 	might_sleep();
 
 	check_sdata_in_driver(sdata);
 
 	trace_drv_sched_scan_stop(local, sdata);
-	local->ops->sched_scan_stop(&local->hw, &sdata->vif);
-	trace_drv_return_void(local);
+	ret = local->ops->sched_scan_stop(&local->hw, &sdata->vif);
+	trace_drv_return_int(local, ret);
+
+	return ret;
 }
 
 static inline void drv_sw_scan_start(struct ieee80211_local *local)

net/mac80211/ht.c

@@ -482,8 +482,6 @@ void ieee80211_request_smps(struct ieee80211_vif *vif,
 		return;
 
 	if (vif->type == NL80211_IFTYPE_STATION) {
-		if (WARN_ON(smps_mode == IEEE80211_SMPS_OFF))
-			smps_mode = IEEE80211_SMPS_AUTOMATIC;
 		if (sdata->u.mgd.driver_smps_mode == smps_mode)
 			return;
 		sdata->u.mgd.driver_smps_mode = smps_mode;

net/mac80211/ibss.c

@@ -283,6 +283,11 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 
 	err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
 					    &chandef);
+	if (err < 0) {
+		sdata_info(sdata,
+			   "Failed to join IBSS, invalid chandef\n");
+		return;
+	}
 	if (err > 0) {
 		if (!ifibss->userspace_handles_dfs) {
 			sdata_info(sdata,

net/mac80211/ieee80211_i.h

@@ -1242,6 +1242,8 @@ struct ieee80211_local {
 
 	struct ieee80211_sub_if_data __rcu *p2p_sdata;
 
+	struct napi_struct *napi;
+
 	/* virtual monitor interface */
 	struct ieee80211_sub_if_data __rcu *monitor_sdata;
 	struct cfg80211_chan_def monitor_chandef;

net/mac80211/iface.c

@@ -101,9 +101,8 @@ static u32 __ieee80211_idle_on(struct ieee80211_local *local)
 static u32 __ieee80211_recalc_idle(struct ieee80211_local *local,
 				   bool force_active)
 {
-	bool working = false, scanning, active;
+	bool working, scanning, active;
 	unsigned int led_trig_start = 0, led_trig_stop = 0;
-	struct ieee80211_roc_work *roc;
 
 	lockdep_assert_held(&local->mtx);
 
@@ -111,12 +110,8 @@ static u32 __ieee80211_recalc_idle(struct ieee80211_local *local,
 		 !list_empty(&local->chanctx_list) ||
 		 local->monitors;
 
-	if (!local->ops->remain_on_channel) {
-		list_for_each_entry(roc, &local->roc_list, list) {
-			working = true;
-			break;
-		}
-	}
+	working = !local->ops->remain_on_channel &&
+		  !list_empty(&local->roc_list);
 
 	scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
 		   test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning);

net/mac80211/main.c

@@ -1076,6 +1076,18 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 }
 EXPORT_SYMBOL(ieee80211_register_hw);
 
+void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
+			struct net_device *napi_dev,
+			int (*poll)(struct napi_struct *, int),
+			int weight)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+
+	netif_napi_add(napi_dev, napi, poll, weight);
+	local->napi = napi;
+}
+EXPORT_SYMBOL_GPL(ieee80211_napi_add);
+
 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);

net/mac80211/mlme.c

@@ -131,13 +131,13 @@ void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
 	if (unlikely(!sdata->u.mgd.associated))
 		return;
 
+	ifmgd->probe_send_count = 0;
+
 	if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
 		return;
 
 	mod_timer(&sdata->u.mgd.conn_mon_timer,
 		  round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
-
-	ifmgd->probe_send_count = 0;
 }
 
 static int ecw2cw(int ecw)
@@ -2249,6 +2249,62 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
 	/* ignore frame -- wait for timeout */
 }
 
+#define case_WLAN(type) \
+	case WLAN_REASON_##type: return #type
+
+static const char *ieee80211_get_reason_code_string(u16 reason_code)
+{
+	switch (reason_code) {
+	case_WLAN(UNSPECIFIED);
+	case_WLAN(PREV_AUTH_NOT_VALID);
+	case_WLAN(DEAUTH_LEAVING);
+	case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
+	case_WLAN(DISASSOC_AP_BUSY);
+	case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
+	case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
+	case_WLAN(DISASSOC_STA_HAS_LEFT);
+	case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
+	case_WLAN(DISASSOC_BAD_POWER);
+	case_WLAN(DISASSOC_BAD_SUPP_CHAN);
+	case_WLAN(INVALID_IE);
+	case_WLAN(MIC_FAILURE);
+	case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
+	case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
+	case_WLAN(IE_DIFFERENT);
+	case_WLAN(INVALID_GROUP_CIPHER);
+	case_WLAN(INVALID_PAIRWISE_CIPHER);
+	case_WLAN(INVALID_AKMP);
+	case_WLAN(UNSUPP_RSN_VERSION);
+	case_WLAN(INVALID_RSN_IE_CAP);
+	case_WLAN(IEEE8021X_FAILED);
+	case_WLAN(CIPHER_SUITE_REJECTED);
+	case_WLAN(DISASSOC_UNSPECIFIED_QOS);
+	case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
+	case_WLAN(DISASSOC_LOW_ACK);
+	case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
+	case_WLAN(QSTA_LEAVE_QBSS);
+	case_WLAN(QSTA_NOT_USE);
+	case_WLAN(QSTA_REQUIRE_SETUP);
+	case_WLAN(QSTA_TIMEOUT);
+	case_WLAN(QSTA_CIPHER_NOT_SUPP);
+	case_WLAN(MESH_PEER_CANCELED);
+	case_WLAN(MESH_MAX_PEERS);
+	case_WLAN(MESH_CONFIG);
+	case_WLAN(MESH_CLOSE);
+	case_WLAN(MESH_MAX_RETRIES);
+	case_WLAN(MESH_CONFIRM_TIMEOUT);
+	case_WLAN(MESH_INVALID_GTK);
+	case_WLAN(MESH_INCONSISTENT_PARAM);
+	case_WLAN(MESH_INVALID_SECURITY);
+	case_WLAN(MESH_PATH_ERROR);
+	case_WLAN(MESH_PATH_NOFORWARD);
+	case_WLAN(MESH_PATH_DEST_UNREACHABLE);
+	case_WLAN(MAC_EXISTS_IN_MBSS);
+	case_WLAN(MESH_CHAN_REGULATORY);
+	case_WLAN(MESH_CHAN);
+	default: return "<unknown>";
+	}
+}
 
 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
 				     struct ieee80211_mgmt *mgmt, size_t len)
@@ -2270,8 +2326,8 @@ static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
 
 	reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
 
-	sdata_info(sdata, "deauthenticated from %pM (Reason: %u)\n",
-		   bssid, reason_code);
+	sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
+		   bssid, reason_code, ieee80211_get_reason_code_string(reason_code));
 
 	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
 
@@ -4340,8 +4396,8 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
 	bool report_frame = false;
 
 	sdata_info(sdata,
-		   "deauthenticating from %pM by local choice (reason=%d)\n",
-		   req->bssid, req->reason_code);
+		   "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
+		   req->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
 
 	if (ifmgd->auth_data) {
 		drv_mgd_prepare_tx(sdata->local, sdata);
@@ -4387,8 +4443,8 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
 		return -ENOLINK;
 
 	sdata_info(sdata,
-		   "disassociating from %pM by local choice (reason=%d)\n",
-		   req->bss->bssid, req->reason_code);
+		   "disassociating from %pM by local choice (Reason: %u=%s)\n",
+		   req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
 
 	memcpy(bssid, req->bss->bssid, ETH_ALEN);
 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,

net/mac80211/rx.c

@@ -1954,7 +1954,10 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
 		/* deliver to local stack */
 		skb->protocol = eth_type_trans(skb, dev);
 		memset(skb->cb, 0, sizeof(skb->cb));
-		netif_receive_skb(skb);
+		if (rx->local->napi)
+			napi_gro_receive(rx->local->napi, skb);
+		else
+			netif_receive_skb(skb);
 	}
 
 	if (xmit_skb) {

net/mac80211/scan.c

@@ -472,9 +472,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 	if (local->ops->hw_scan) {
 		u8 *ies;
 
-		local->hw_scan_ies_bufsize = 2 + IEEE80211_MAX_SSID_LEN +
-					     local->scan_ies_len +
-					     req->ie_len;
+		local->hw_scan_ies_bufsize = local->scan_ies_len + req->ie_len;
 		local->hw_scan_req = kmalloc(
 				sizeof(*local->hw_scan_req) +
 				req->n_channels * sizeof(req->channels[0]) +
@@ -979,8 +977,7 @@ int __ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
 	struct cfg80211_chan_def chandef;
 	int ret, i, iebufsz;
 
-	iebufsz = 2 + IEEE80211_MAX_SSID_LEN +
-		  local->scan_ies_len + req->ie_len;
+	iebufsz = local->scan_ies_len + req->ie_len;
 
 	lockdep_assert_held(&local->mtx);
 
@@ -1059,7 +1056,7 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
 	local->sched_scan_req = NULL;
 
 	if (rcu_access_pointer(local->sched_scan_sdata))
-		drv_sched_scan_stop(local, sdata);
+		ret = drv_sched_scan_stop(local, sdata);
 
 out:
 	mutex_unlock(&local->mtx);

net/wireless/chan.c

@@ -705,12 +705,8 @@ cfg80211_get_chan_state(struct wireless_dev *wdev,
 	case NL80211_IFTYPE_MONITOR:
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_WDS:
-		/* these interface types don't really have a channel */
-		return;
 	case NL80211_IFTYPE_P2P_DEVICE:
-		if (wdev->wiphy->features &
-				NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL)
-			*chanmode = CHAN_MODE_EXCLUSIVE;
+		/* these interface types don't really have a channel */
 		return;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:

net/wireless/genregdb.awk

@@ -105,6 +105,8 @@ function parse_reg_rule()
 			flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
 		} else if (flagarray[arg] == "NO-IR") {
 			flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
+		} else if (flagarray[arg] == "AUTO-BW") {
+			flags = flags "\n\t\t\tNL80211_RRF_AUTO_BW | "
 		}
 
 	}

net/wireless/ibss.c

@@ -128,12 +128,11 @@ int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
 #endif
 	check_chan = params->chandef.chan;
 	if (params->userspace_handles_dfs) {
-		/* use channel NULL to check for radar even if the current
-		 * channel is not a radar channel - it might decide to change
-		 * to DFS channel later.
+		/* Check for radar even if the current channel is not
+		 * a radar channel - it might decide to change to DFS
+		 * channel later.
 		 */
 		radar_detect_width = BIT(params->chandef.width);
-		check_chan = NULL;
 	}
 
 	err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype,

net/wireless/mesh.c

@@ -236,6 +236,12 @@ int cfg80211_set_mesh_channel(struct cfg80211_registered_device *rdev,
 		if (!netif_running(wdev->netdev))
 			return -ENETDOWN;
 
+		/* cfg80211_can_use_chan() calls
+		 * cfg80211_can_use_iftype_chan() with no radar
+		 * detection, so if we're trying to use a radar
+		 * channel here, something is wrong.
+		 */
+		WARN_ON_ONCE(chandef->chan->flags & IEEE80211_CHAN_RADAR);
 		err = cfg80211_can_use_chan(rdev, wdev, chandef->chan,
 					    CHAN_MODE_SHARED);
 		if (err)

net/wireless/nl80211.c

@@ -384,6 +384,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 				   .len = IEEE80211_QOS_MAP_LEN_MAX },
 	[NL80211_ATTR_MAC_HINT] = { .len = ETH_ALEN },
 	[NL80211_ATTR_WIPHY_FREQ_HINT] = { .type = NLA_U32 },
+	[NL80211_ATTR_TDLS_PEER_CAPABILITY] = { .type = NLA_U32 },
 };
 
 /* policy for the key attributes */
@@ -4627,6 +4628,8 @@ static int parse_reg_rule(struct nlattr *tb[],
 		return -EINVAL;
 	if (!tb[NL80211_ATTR_FREQ_RANGE_END])
 		return -EINVAL;
+	if (!tb[NL80211_ATTR_FREQ_RANGE_MAX_BW])
+		return -EINVAL;
 	if (!tb[NL80211_ATTR_POWER_RULE_MAX_EIRP])
 		return -EINVAL;
 
@@ -4636,9 +4639,8 @@ static int parse_reg_rule(struct nlattr *tb[],
 		nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_START]);
 	freq_range->end_freq_khz =
 		nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_END]);
-	if (tb[NL80211_ATTR_FREQ_RANGE_MAX_BW])
-		freq_range->max_bandwidth_khz =
-			nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]);
+	freq_range->max_bandwidth_khz =
+		nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]);
 
 	power_rule->max_eirp =
 		nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]);
@@ -5710,8 +5712,8 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 		request->min_rssi_thold = NL80211_SCAN_RSSI_THOLD_OFF;
 	}
 
-	if (info->attrs[NL80211_ATTR_IE]) {
-		request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+	if (ie_len) {
+		request->ie_len = ie_len;
 		memcpy((void *)request->ie,
 		       nla_data(info->attrs[NL80211_ATTR_IE]),
 		       request->ie_len);
@@ -5911,17 +5913,22 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
 	if (!cfg80211_reg_can_beacon(&rdev->wiphy, &params.chandef))
 		return -EINVAL;
 
-	if (dev->ieee80211_ptr->iftype == NL80211_IFTYPE_AP ||
-	    dev->ieee80211_ptr->iftype == NL80211_IFTYPE_P2P_GO ||
-	    dev->ieee80211_ptr->iftype == NL80211_IFTYPE_ADHOC) {
+	switch (dev->ieee80211_ptr->iftype) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MESH_POINT:
 		err = cfg80211_chandef_dfs_required(wdev->wiphy,
 						    &params.chandef);
-		if (err < 0) {
+		if (err < 0)
 			return err;
-		} else if (err) {
+		if (err) {
 			radar_detect_width = BIT(params.chandef.width);
 			params.radar_required = true;
 		}
+		break;
+	default:
+		break;
 	}
 
 	err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype,
@@ -7269,6 +7276,7 @@ static int nl80211_tdls_mgmt(struct sk_buff *skb, struct genl_info *info)
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct net_device *dev = info->user_ptr[1];
 	u8 action_code, dialog_token;
+	u32 peer_capability = 0;
 	u16 status_code;
 	u8 *peer;
 
@@ -7287,9 +7295,12 @@ static int nl80211_tdls_mgmt(struct sk_buff *skb, struct genl_info *info)
 	action_code = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_ACTION]);
 	status_code = nla_get_u16(info->attrs[NL80211_ATTR_STATUS_CODE]);
 	dialog_token = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_DIALOG_TOKEN]);
+	if (info->attrs[NL80211_ATTR_TDLS_PEER_CAPABILITY])
+		peer_capability =
+			nla_get_u32(info->attrs[NL80211_ATTR_TDLS_PEER_CAPABILITY]);
 
 	return rdev_tdls_mgmt(rdev, dev, peer, action_code,
-			      dialog_token, status_code,
+			      dialog_token, status_code, peer_capability,
 			      nla_data(info->attrs[NL80211_ATTR_IE]),
 			      nla_len(info->attrs[NL80211_ATTR_IE]));
 }

net/wireless/rdev-ops.h

@@ -769,13 +769,16 @@ static inline int rdev_set_rekey_data(struct cfg80211_registered_device *rdev,
 static inline int rdev_tdls_mgmt(struct cfg80211_registered_device *rdev,
 				 struct net_device *dev, u8 *peer,
 				 u8 action_code, u8 dialog_token,
-				 u16 status_code, const u8 *buf, size_t len)
+				 u16 status_code, u32 peer_capability,
+				 const u8 *buf, size_t len)
 {
 	int ret;
 	trace_rdev_tdls_mgmt(&rdev->wiphy, dev, peer, action_code,
-			     dialog_token, status_code, buf, len);
+			     dialog_token, status_code, peer_capability,
+			     buf, len);
 	ret = rdev->ops->tdls_mgmt(&rdev->wiphy, dev, peer, action_code,
-				   dialog_token, status_code, buf, len);
+				   dialog_token, status_code, peer_capability,
+				   buf, len);
 	trace_rdev_return_int(&rdev->wiphy, ret);
 	return ret;
 }

net/wireless/reg.c

@@ -563,9 +563,6 @@ unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
 		if (freq_range_tmp->end_freq_khz < freq_range->start_freq_khz)
 			break;
 
-		if (freq_range_tmp->max_bandwidth_khz)
-			break;
-
 		freq_range = freq_range_tmp;
 	}
 
@@ -582,9 +579,6 @@ unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
 		if (freq_range_tmp->start_freq_khz > freq_range->end_freq_khz)
 			break;
 
-		if (freq_range_tmp->max_bandwidth_khz)
-			break;
-
 		freq_range = freq_range_tmp;
 	}
 
@@ -729,21 +723,29 @@ static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
 	max_bandwidth1 = freq_range1->max_bandwidth_khz;
 	max_bandwidth2 = freq_range2->max_bandwidth_khz;
 
-	/*
-	 * In case max_bandwidth1 == 0 and max_bandwith2 == 0 set
-	 * output bandwidth as 0 (auto calculation). Next we will
-	 * calculate this correctly in handle_channel function.
-	 * In other case calculate output bandwidth here.
-	 */
-	if (max_bandwidth1 || max_bandwidth2) {
-		if (!max_bandwidth1)
-			max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1);
-		if (!max_bandwidth2)
-			max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2);
-	}
+	if (rule1->flags & NL80211_RRF_AUTO_BW)
+		max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1);
+	if (rule2->flags & NL80211_RRF_AUTO_BW)
+		max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2);
 
 	freq_range->max_bandwidth_khz = min(max_bandwidth1, max_bandwidth2);
 
+	intersected_rule->flags = rule1->flags | rule2->flags;
+
+	/*
+	 * In case NL80211_RRF_AUTO_BW requested for both rules
+	 * set AUTO_BW in intersected rule also. Next we will
+	 * calculate BW correctly in handle_channel function.
+	 * In other case remove AUTO_BW flag while we calculate
+	 * maximum bandwidth correctly and auto calculation is
+	 * not required.
+	 */
+	if ((rule1->flags & NL80211_RRF_AUTO_BW) &&
+	    (rule2->flags & NL80211_RRF_AUTO_BW))
+		intersected_rule->flags |= NL80211_RRF_AUTO_BW;
+	else
+		intersected_rule->flags &= ~NL80211_RRF_AUTO_BW;
+
 	freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
 	if (freq_range->max_bandwidth_khz > freq_diff)
 		freq_range->max_bandwidth_khz = freq_diff;
@@ -753,8 +755,6 @@ static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
 	power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain,
 		power_rule2->max_antenna_gain);
 
-	intersected_rule->flags = rule1->flags | rule2->flags;
-
 	if (!is_valid_reg_rule(intersected_rule))
 		return -EINVAL;
 
@@ -938,31 +938,42 @@ const char *reg_initiator_name(enum nl80211_reg_initiator initiator)
 EXPORT_SYMBOL(reg_initiator_name);
 
 #ifdef CONFIG_CFG80211_REG_DEBUG
-static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan,
+static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
+				    struct ieee80211_channel *chan,
 				    const struct ieee80211_reg_rule *reg_rule)
 {
 	const struct ieee80211_power_rule *power_rule;
 	const struct ieee80211_freq_range *freq_range;
-	char max_antenna_gain[32];
+	char max_antenna_gain[32], bw[32];
 
 	power_rule = &reg_rule->power_rule;
 	freq_range = &reg_rule->freq_range;
 
 	if (!power_rule->max_antenna_gain)
-		snprintf(max_antenna_gain, 32, "N/A");
+		snprintf(max_antenna_gain, sizeof(max_antenna_gain), "N/A");
 	else
-		snprintf(max_antenna_gain, 32, "%d", power_rule->max_antenna_gain);
+		snprintf(max_antenna_gain, sizeof(max_antenna_gain), "%d",
+			 power_rule->max_antenna_gain);
+
+	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
+		snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO",
+			 freq_range->max_bandwidth_khz,
+			 reg_get_max_bandwidth(regd, reg_rule));
+	else
+		snprintf(bw, sizeof(bw), "%d KHz",
+			 freq_range->max_bandwidth_khz);
 
 	REG_DBG_PRINT("Updating information on frequency %d MHz with regulatory rule:\n",
 		      chan->center_freq);
 
-	REG_DBG_PRINT("%d KHz - %d KHz @ %d KHz), (%s mBi, %d mBm)\n",
+	REG_DBG_PRINT("%d KHz - %d KHz @ %s), (%s mBi, %d mBm)\n",
 		      freq_range->start_freq_khz, freq_range->end_freq_khz,
-		      freq_range->max_bandwidth_khz, max_antenna_gain,
+		      bw, max_antenna_gain,
 		      power_rule->max_eirp);
 }
 #else
-static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan,
+static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
+				    struct ieee80211_channel *chan,
 				    const struct ieee80211_reg_rule *reg_rule)
 {
 	return;
@@ -1022,17 +1033,16 @@ static void handle_channel(struct wiphy *wiphy,
 		return;
 	}
 
-	chan_reg_rule_print_dbg(chan, reg_rule);
+	regd = reg_get_regdomain(wiphy);
+	chan_reg_rule_print_dbg(regd, chan, reg_rule);
 
 	power_rule = &reg_rule->power_rule;
 	freq_range = &reg_rule->freq_range;
 
 	max_bandwidth_khz = freq_range->max_bandwidth_khz;
 	/* Check if auto calculation requested */
-	if (!max_bandwidth_khz) {
-		regd = reg_get_regdomain(wiphy);
+	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
-	}
 
 	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
 		bw_flags = IEEE80211_CHAN_NO_HT40;
@@ -1437,14 +1447,14 @@ static void handle_channel_custom(struct wiphy *wiphy,
 		return;
 	}
 
-	chan_reg_rule_print_dbg(chan, reg_rule);
+	chan_reg_rule_print_dbg(regd, chan, reg_rule);
 
 	power_rule = &reg_rule->power_rule;
 	freq_range = &reg_rule->freq_range;
 
 	max_bandwidth_khz = freq_range->max_bandwidth_khz;
 	/* Check if auto calculation requested */
-	if (!max_bandwidth_khz)
+	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
 	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
@@ -2254,11 +2264,12 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd)
 		freq_range = &reg_rule->freq_range;
 		power_rule = &reg_rule->power_rule;
 
-		if (!freq_range->max_bandwidth_khz)
-			snprintf(bw, 32, "%d KHz, AUTO",
+		if (reg_rule->flags & NL80211_RRF_AUTO_BW)
+			snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO",
+				 freq_range->max_bandwidth_khz,
 				 reg_get_max_bandwidth(rd, reg_rule));
 		else
-			snprintf(bw, 32, "%d KHz",
+			snprintf(bw, sizeof(bw), "%d KHz",
 				 freq_range->max_bandwidth_khz);
 
 		/*

net/wireless/trace.h

@@ -1468,9 +1468,10 @@ TRACE_EVENT(rdev_sched_scan_start,
 TRACE_EVENT(rdev_tdls_mgmt,
 	TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
 		 u8 *peer, u8 action_code, u8 dialog_token,
-		 u16 status_code, const u8 *buf, size_t len),
+		 u16 status_code, u32 peer_capability,
+		 const u8 *buf, size_t len),
 	TP_ARGS(wiphy, netdev, peer, action_code, dialog_token, status_code,
-		buf, len),
+		peer_capability, buf, len),
 	TP_STRUCT__entry(
 		WIPHY_ENTRY
 		NETDEV_ENTRY
@@ -1478,6 +1479,7 @@ TRACE_EVENT(rdev_tdls_mgmt,
 		__field(u8, action_code)
 		__field(u8, dialog_token)
 		__field(u16, status_code)
+		__field(u32, peer_capability)
 		__dynamic_array(u8, buf, len)
 	),
 	TP_fast_assign(
@@ -1487,13 +1489,15 @@ TRACE_EVENT(rdev_tdls_mgmt,
 		__entry->action_code = action_code;
 		__entry->dialog_token = dialog_token;
 		__entry->status_code = status_code;
+		__entry->peer_capability = peer_capability;
 		memcpy(__get_dynamic_array(buf), buf, len);
 	),
 	TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT ", action_code: %u, "
-		  "dialog_token: %u, status_code: %u, buf: %#.2x ",
+		  "dialog_token: %u, status_code: %u, peer_capability: %u buf: %#.2x ",
 		  WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer),
 		  __entry->action_code, __entry->dialog_token,
-		  __entry->status_code, ((u8 *)__get_dynamic_array(buf))[0])
+		  __entry->status_code, __entry->peer_capability,
+		  ((u8 *)__get_dynamic_array(buf))[0])
 );
 
 TRACE_EVENT(rdev_dump_survey,

net/wireless/util.c

@@ -1269,7 +1269,6 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 	enum cfg80211_chan_mode chmode;
 	int num_different_channels = 0;
 	int total = 1;
-	bool radar_required = false;
 	int i, j;
 
 	ASSERT_RTNL();
@@ -1277,35 +1276,7 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 	if (WARN_ON(hweight32(radar_detect) > 1))
 		return -EINVAL;
 
-	switch (iftype) {
-	case NL80211_IFTYPE_ADHOC:
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_AP_VLAN:
-	case NL80211_IFTYPE_MESH_POINT:
-	case NL80211_IFTYPE_P2P_GO:
-	case NL80211_IFTYPE_WDS:
-		/* if the interface could potentially choose a DFS channel,
-		 * then mark DFS as required.
-		 */
-		if (!chan) {
-			if (chanmode != CHAN_MODE_UNDEFINED && radar_detect)
-				radar_required = true;
-			break;
-		}
-		radar_required = !!(chan->flags & IEEE80211_CHAN_RADAR);
-		break;
-	case NL80211_IFTYPE_P2P_CLIENT:
-	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_P2P_DEVICE:
-	case NL80211_IFTYPE_MONITOR:
-		break;
-	case NUM_NL80211_IFTYPES:
-	case NL80211_IFTYPE_UNSPECIFIED:
-	default:
-		return -EINVAL;
-	}
-
-	if (radar_required && !radar_detect)
+	if (WARN_ON(iftype >= NUM_NL80211_IFTYPES))
 		return -EINVAL;
 
 	/* Always allow software iftypes */