提交 c76c0475 编写于 作者: M Michael Chan 提交者: David S. Miller

[BNX2]: Add support for a new tx ring.

To separate TX IRQs into a different MSIX vector, we need to
support a new tx ring.  The original tx ring will still be used
when not using MSIX.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 b4b36042
......@@ -2378,7 +2378,10 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi)
{
u16 cons;
cons = bnapi->status_blk->status_tx_quick_consumer_index0;
if (bnapi->int_num == 0)
cons = bnapi->status_blk->status_tx_quick_consumer_index0;
else
cons = bnapi->status_blk_msix->status_tx_quick_consumer_index;
if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT))
cons++;
......@@ -2389,7 +2392,6 @@ static void
bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi)
{
u16 hw_cons, sw_cons, sw_ring_cons;
int tx_free_bd = 0;
hw_cons = bnx2_get_hw_tx_cons(bnapi);
sw_cons = bnapi->tx_cons;
......@@ -2439,8 +2441,6 @@ bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi)
sw_cons = NEXT_TX_BD(sw_cons);
tx_free_bd += last + 1;
dev_kfree_skb(skb);
hw_cons = bnx2_get_hw_tx_cons(bnapi);
......@@ -4369,6 +4369,24 @@ bnx2_init_chip(struct bnx2 *bp)
BNX2_HC_CONFIG_COLLECT_STATS;
}
if (bp->flags & USING_MSIX_FLAG) {
REG_WR(bp, BNX2_HC_MSIX_BIT_VECTOR,
BNX2_HC_MSIX_BIT_VECTOR_VAL);
REG_WR(bp, BNX2_HC_SB_CONFIG_1,
BNX2_HC_SB_CONFIG_1_TX_TMR_MODE |
BNX2_HC_SB_CONFIG_1_ONE_SHOT);
REG_WR(bp, BNX2_HC_TX_QUICK_CONS_TRIP_1,
(bp->tx_quick_cons_trip_int << 16) |
bp->tx_quick_cons_trip);
REG_WR(bp, BNX2_HC_TX_TICKS_1,
(bp->tx_ticks_int << 16) | bp->tx_ticks);
val |= BNX2_HC_CONFIG_SB_ADDR_INC_128B;
}
if (bp->flags & ONE_SHOT_MSI_FLAG)
val |= BNX2_HC_CONFIG_ONE_SHOT;
......@@ -4400,6 +4418,25 @@ bnx2_init_chip(struct bnx2 *bp)
return rc;
}
static void
bnx2_clear_ring_states(struct bnx2 *bp)
{
struct bnx2_napi *bnapi;
int i;
for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
bnapi = &bp->bnx2_napi[i];
bnapi->tx_cons = 0;
bnapi->hw_tx_cons = 0;
bnapi->rx_prod_bseq = 0;
bnapi->rx_prod = 0;
bnapi->rx_cons = 0;
bnapi->rx_pg_prod = 0;
bnapi->rx_pg_cons = 0;
}
}
static void
bnx2_init_tx_context(struct bnx2 *bp, u32 cid)
{
......@@ -4433,8 +4470,17 @@ static void
bnx2_init_tx_ring(struct bnx2 *bp)
{
struct tx_bd *txbd;
u32 cid;
struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
u32 cid = TX_CID;
struct bnx2_napi *bnapi;
bp->tx_vec = 0;
if (bp->flags & USING_MSIX_FLAG) {
cid = TX_TSS_CID;
bp->tx_vec = BNX2_TX_VEC;
REG_WR(bp, BNX2_TSCH_TSS_CFG, BNX2_TX_INT_NUM |
(TX_TSS_CID << 7));
}
bnapi = &bp->bnx2_napi[bp->tx_vec];
bp->tx_wake_thresh = bp->tx_ring_size / 2;
......@@ -4444,11 +4490,8 @@ bnx2_init_tx_ring(struct bnx2 *bp)
txbd->tx_bd_haddr_lo = (u64) bp->tx_desc_mapping & 0xffffffff;
bp->tx_prod = 0;
bnapi->tx_cons = 0;
bnapi->hw_tx_cons = 0;
bp->tx_prod_bseq = 0;
cid = TX_CID;
bp->tx_bidx_addr = MB_GET_CID_ADDR(cid) + BNX2_L2CTX_TX_HOST_BIDX;
bp->tx_bseq_addr = MB_GET_CID_ADDR(cid) + BNX2_L2CTX_TX_HOST_BSEQ;
......@@ -4487,12 +4530,6 @@ bnx2_init_rx_ring(struct bnx2 *bp)
u32 val, rx_cid_addr = GET_CID_ADDR(RX_CID);
struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
bnapi->rx_prod = 0;
bnapi->rx_cons = 0;
bnapi->rx_prod_bseq = 0;
bnapi->rx_pg_prod = 0;
bnapi->rx_pg_cons = 0;
bnx2_init_rxbd_rings(bp->rx_desc_ring, bp->rx_desc_mapping,
bp->rx_buf_use_size, bp->rx_max_ring);
......@@ -4694,6 +4731,7 @@ bnx2_reset_nic(struct bnx2 *bp, u32 reset_code)
if ((rc = bnx2_init_chip(bp)) != 0)
return rc;
bnx2_clear_ring_states(bp);
bnx2_init_tx_ring(bp);
bnx2_init_rx_ring(bp);
return 0;
......@@ -4965,7 +5003,11 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
struct sw_bd *rx_buf;
struct l2_fhdr *rx_hdr;
int ret = -ENODEV;
struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
struct bnx2_napi *bnapi = &bp->bnx2_napi[0], *tx_napi;
tx_napi = bnapi;
if (bp->flags & USING_MSIX_FLAG)
tx_napi = &bp->bnx2_napi[BNX2_TX_VEC];
if (loopback_mode == BNX2_MAC_LOOPBACK) {
bp->loopback = MAC_LOOPBACK;
......@@ -5030,7 +5072,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
pci_unmap_single(bp->pdev, map, pkt_size, PCI_DMA_TODEVICE);
dev_kfree_skb(skb);
if (bnx2_get_hw_tx_cons(bnapi) != bp->tx_prod)
if (bnx2_get_hw_tx_cons(tx_napi) != bp->tx_prod)
goto loopback_test_done;
rx_idx = bnx2_get_hw_rx_cons(bnapi);
......@@ -5324,7 +5366,7 @@ bnx2_request_irq(struct bnx2 *bp)
for (i = 0; i < bp->irq_nvecs; i++) {
irq = &bp->irq_tbl[i];
rc = request_irq(irq->vector, irq->handler, flags, dev->name,
rc = request_irq(irq->vector, irq->handler, flags, irq->name,
dev);
if (rc)
break;
......
......@@ -6529,6 +6529,9 @@ struct flash_spec {
#define BNX2_MAX_MSIX_HW_VEC 9
#define BNX2_MAX_MSIX_VEC 1
#define BNX2_BASE_VEC 0
#define BNX2_TX_VEC 1
#define BNX2_TX_INT_NUM (BNX2_TX_VEC << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT)
struct bnx2_irq {
irq_handler_t handler;
......@@ -6541,6 +6544,7 @@ struct bnx2_napi {
struct napi_struct napi ____cacheline_aligned;
struct bnx2 *bp;
struct status_block *status_blk;
struct status_block_msix *status_blk_msix;
u32 last_status_idx;
u32 int_num;
......@@ -6583,6 +6587,7 @@ struct bnx2 {
u32 tx_prod_bseq __attribute__((aligned(L1_CACHE_BYTES)));
u16 tx_prod;
u8 tx_vec;
u32 tx_bidx_addr;
u32 tx_bseq_addr;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册