提交 c7540644 编写于 作者: N Nicolin Chen 提交者: Mark Brown

ASoC: fsl_sai: Add imx6sx platform support

The next coming i.MX6 Solo X SoC also contains SAI module while we use
imp_pcm_init() for i.MX platform.

So this patch adds one compatible route for imx6sx and updates the DT
doc accordingly.
Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
上级 8abba5d6
......@@ -7,7 +7,7 @@ codec/DSP interfaces.
Required properties:
- compatible: Compatible list, contains "fsl,vf610-sai".
- compatible: Compatible list, contains "fsl,vf610-sai" or "fsl,imx6sx-sai".
- reg: Offset and length of the register set for the device.
- clocks: Must contain an entry for each entry in clock-names.
- clock-names : Must include the "sai" entry.
......
......@@ -22,6 +22,7 @@
#include <sound/pcm_params.h>
#include "fsl_sai.h"
#include "imx-pcm.h"
#define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\
FSL_SAI_CSR_FEIE)
......@@ -592,6 +593,9 @@ static int fsl_sai_probe(struct platform_device *pdev)
sai->pdev = pdev;
if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx6sx-sai"))
sai->sai_on_imx = true;
sai->big_endian_regs = of_property_read_bool(np, "big-endian-regs");
if (sai->big_endian_regs)
fsl_sai_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
......@@ -634,12 +638,16 @@ static int fsl_sai_probe(struct platform_device *pdev)
if (ret)
return ret;
return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL,
SND_DMAENGINE_PCM_FLAG_NO_RESIDUE);
if (sai->sai_on_imx)
return imx_pcm_dma_init(pdev);
else
return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL,
SND_DMAENGINE_PCM_FLAG_NO_RESIDUE);
}
static const struct of_device_id fsl_sai_ids[] = {
{ .compatible = "fsl,vf610-sai", },
{ .compatible = "fsl,imx6sx-sai", },
{ /* sentinel */ }
};
......
......@@ -130,6 +130,7 @@ struct fsl_sai {
bool big_endian_regs;
bool big_endian_data;
bool is_dsp_mode;
bool sai_on_imx;
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct snd_dmaengine_dai_dma_data dma_params_tx;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册