ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for i2c nodes

Use recently added R-Car Gen 2 fallback binding for i2c nodes in
DT for r8a7791 SoC.

This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7791 and the
fallback binding for R-Car Gen 2.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>

arch/arm/boot/dts/r8a7791.dtsi

@@ -444,7 +444,7 @@
 	i2c0: i2c@e6508000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
+		compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
 		reg = <0 0xe6508000 0 0x40>;
 		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
@@ -456,7 +456,7 @@
 	i2c1: i2c@e6518000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
+		compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
 		reg = <0 0xe6518000 0 0x40>;
 		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
@@ -468,7 +468,7 @@
 	i2c2: i2c@e6530000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
+		compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
 		reg = <0 0xe6530000 0 0x40>;
 		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
@@ -480,7 +480,7 @@
 	i2c3: i2c@e6540000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
+		compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
 		reg = <0 0xe6540000 0 0x40>;
 		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
@@ -492,7 +492,7 @@
 	i2c4: i2c@e6520000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
+		compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
 		reg = <0 0xe6520000 0 0x40>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
@@ -505,7 +505,7 @@
 		/* doesn't need pinmux */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
+		compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
 		reg = <0 0xe6528000 0 0x40>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C5>;