drm/amd/display: Read DP_SINK_COUNT_ESI range on HPD for DP 1.4

DP 1.4 compliance now requires that registers at DP_SINK_COUNT_ESI range
(0x2002-0x2003, 0x200c-0x200f) are read instead of DP_SINK_COUNT range
(0x200-0x2005.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c

@@ -1630,17 +1630,42 @@ static enum dc_status read_hpd_rx_irq_data(
 	struct dc_link *link,
 	union hpd_irq_data *irq_data)
 {
+	static enum dc_status retval;
+
 	/* The HW reads 16 bytes from 200h on HPD,
 	 * but if we get an AUX_DEFER, the HW cannot retry
 	 * and this causes the CTS tests 4.3.2.1 - 3.2.4 to
 	 * fail, so we now explicitly read 6 bytes which is
 	 * the req from the above mentioned test cases.
+	 *
+	 * For DP 1.4 we need to read those from 2002h range.
 	 */
-	return core_link_read_dpcd(
-	link,
-	DP_SINK_COUNT,
-	irq_data->raw,
-	sizeof(union hpd_irq_data));
+	if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_14)
+		retval = core_link_read_dpcd(
+			link,
+			DP_SINK_COUNT,
+			irq_data->raw,
+			sizeof(union hpd_irq_data));
+	else {
+		/* Read 2 bytes at this location,... */
+		retval = core_link_read_dpcd(
+			link,
+			DP_SINK_COUNT_ESI,
+			irq_data->raw,
+			2);
+
+		if (retval != DC_OK)
+			return retval;
+
+		/* ... then read remaining 4 at the other location */
+		retval = core_link_read_dpcd(
+			link,
+			DP_LANE0_1_STATUS_ESI,
+			&irq_data->raw[2],
+			4);
+	}
+
+	return retval;
 }
 
 static bool allow_hpd_rx_irq(const struct dc_link *link)