mmc: core: Hold re-tuning during switch commands

Hold re-tuning during switch commands to prevent
it from conflicting with the busy state or the CMD13
verification.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

drivers/mmc/core/mmc_ops.c

@@ -19,6 +19,7 @@
 #include <linux/mmc/mmc.h>
 
 #include "core.h"
+#include "host.h"
 #include "mmc_ops.h"
 
 #define MMC_OPS_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */
@@ -474,6 +475,8 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 	u32 status = 0;
 	bool use_r1b_resp = use_busy_signal;
 
+	mmc_retune_hold(host);
+
 	/*
 	 * If the cmd timeout and the max_busy_timeout of the host are both
 	 * specified, let's validate them. A failure means we need to prevent
@@ -506,11 +509,11 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 
 	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 	if (err)
-		return err;
+		goto out;
 
 	/* No need to check card status in case of unblocking command */
 	if (!use_busy_signal)
-		return 0;
+		goto out;
 
 	/*
 	 * CRC errors shall only be ignored in cases were CMD13 is used to poll
@@ -529,7 +532,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		if (send_status) {
 			err = __mmc_send_status(card, &status, ignore_crc);
 			if (err)
-				return err;
+				goto out;
 		}
 		if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
 			break;
@@ -543,29 +546,36 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		 */
 		if (!send_status) {
 			mmc_delay(timeout_ms);
-			return 0;
+			goto out;
 		}
 
 		/* Timeout if the device never leaves the program state. */
 		if (time_after(jiffies, timeout)) {
 			pr_err("%s: Card stuck in programming state! %s\n",
 				mmc_hostname(host), __func__);
-			return -ETIMEDOUT;
+			err = -ETIMEDOUT;
+			goto out;
 		}
 	} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
 
 	if (mmc_host_is_spi(host)) {
-		if (status & R1_SPI_ILLEGAL_COMMAND)
-			return -EBADMSG;
+		if (status & R1_SPI_ILLEGAL_COMMAND) {
+			err = -EBADMSG;
+			goto out;
+		}
 	} else {
 		if (status & 0xFDFFA000)
 			pr_warn("%s: unexpected status %#x after switch\n",
 				mmc_hostname(host), status);
-		if (status & R1_SWITCH_ERROR)
-			return -EBADMSG;
+		if (status & R1_SWITCH_ERROR) {
+			err = -EBADMSG;
+			goto out;
+		}
 	}
+out:
+	mmc_retune_release(host);
 
-	return 0;
+	return err;
 }
 EXPORT_SYMBOL_GPL(__mmc_switch);