提交 c6c96d7b 编写于 作者: L Linus Torvalds

Merge tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A bunch of small fixes for USB-audio and HD-audio, where most of them
  are for regressions: USB-audio PM fixes, ratelimit annoyance fix, HDMI
  offline state fix, and a couple of device-specific quirks"

* tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - hdmi: Set converter channel count even without sink
  ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data
  ALSA: usb-audio: Fix deadlocks at resuming
  ALSA: usb-audio: Save mixer status only once at suspend
  ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined
  ALSA: hda - add headset mic detect quirk for a Dell laptop
......@@ -1127,8 +1127,10 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
AMP_OUT_UNMUTE);
eld = &per_pin->sink_eld;
if (!eld->monitor_present)
if (!eld->monitor_present) {
hdmi_set_channel_count(codec, per_pin->cvt_nid, channels);
return;
}
if (!non_pcm && per_pin->chmap_set)
ca = hdmi_manual_channel_allocation(channels, per_pin->chmap);
......
......@@ -4622,6 +4622,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1028, 0x0668, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0669, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0674, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x067e, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x067f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
......
......@@ -651,7 +651,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip)
int err = -ENODEV;
down_read(&chip->shutdown_rwsem);
if (chip->probing)
if (chip->probing && chip->in_pm)
err = 0;
else if (!chip->shutdown)
err = usb_autopm_get_interface(chip->pm_intf);
......@@ -663,7 +663,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip)
void snd_usb_autosuspend(struct snd_usb_audio *chip)
{
down_read(&chip->shutdown_rwsem);
if (!chip->shutdown && !chip->probing)
if (!chip->shutdown && !chip->probing && !chip->in_pm)
usb_autopm_put_interface(chip->pm_intf);
up_read(&chip->shutdown_rwsem);
}
......@@ -695,8 +695,9 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
chip->autosuspended = 1;
}
list_for_each_entry(mixer, &chip->mixer_list, list)
snd_usb_mixer_suspend(mixer);
if (chip->num_suspended_intf == 1)
list_for_each_entry(mixer, &chip->mixer_list, list)
snd_usb_mixer_suspend(mixer);
return 0;
}
......@@ -711,6 +712,8 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
return 0;
if (--chip->num_suspended_intf)
return 0;
chip->in_pm = 1;
/*
* ALSA leaves material resumption to user space
* we just notify and restart the mixers
......@@ -726,6 +729,7 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
chip->autosuspended = 0;
err_out:
chip->in_pm = 0;
return err;
}
......
......@@ -92,6 +92,7 @@ struct snd_usb_endpoint {
unsigned int curframesize; /* current packet size in frames (for capture) */
unsigned int syncmaxsize; /* sync endpoint packet size */
unsigned int fill_max:1; /* fill max packet size always */
unsigned int udh01_fb_quirk:1; /* corrupted feedback data */
unsigned int datainterval; /* log_2 of data packet interval */
unsigned int syncinterval; /* P for adaptive mode, 0 otherwise */
unsigned char silence_value;
......
......@@ -471,6 +471,10 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
ep->syncinterval = 3;
ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize);
if (chip->usb_id == USB_ID(0x0644, 0x8038) /* TEAC UD-H01 */ &&
ep->syncmaxsize == 4)
ep->udh01_fb_quirk = 1;
}
list_add_tail(&ep->list, &chip->ep_list);
......@@ -1105,7 +1109,16 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
if (f == 0)
return;
if (unlikely(ep->freqshift == INT_MIN)) {
if (unlikely(sender->udh01_fb_quirk)) {
/*
* The TEAC UD-H01 firmware sometimes changes the feedback value
* by +/- 0x1.0000.
*/
if (f < ep->freqn - 0x8000)
f += 0x10000;
else if (f > ep->freqn + 0x8000)
f -= 0x10000;
} else if (unlikely(ep->freqshift == INT_MIN)) {
/*
* The first time we see a feedback value, determine its format
* by shifting it left or right until it matches the nominal
......
......@@ -1501,9 +1501,8 @@ static void retire_playback_urb(struct snd_usb_substream *subs,
* The error should be lower than 2ms since the estimate relies
* on two reads of a counter updated every ms.
*/
if (printk_ratelimit() &&
abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
dev_dbg(&subs->dev->dev,
if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
dev_dbg_ratelimited(&subs->dev->dev,
"delay: estimated %d, actual %d\n",
est_delay, subs->last_delay);
......
......@@ -40,6 +40,7 @@ struct snd_usb_audio {
struct rw_semaphore shutdown_rwsem;
unsigned int shutdown:1;
unsigned int probing:1;
unsigned int in_pm:1;
unsigned int autosuspended:1;
unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册