Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 c6778ff8 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM 64-bit DT updates from Olof Johansson:
 "Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch
  of smaller changes, but also some new platforms that are worth
  mentioning:

   - Rockchip RK3399 platforms for Chromebooks, including Samsung
     Chromebook Plus (Kevin)

   - Orange Pi PC2 (Allwinner H5)

   - Freescale LS2088A and LS1088A SoCs

   - Expanded support for Nvidia Tegra186 (and Jetson TX2)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits)
  arm64: dts: Add basic DT to support Spreadtrum's SP9860G
  arm64: dts: exynos: Use - instead of @ for DT OPP entries
  arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
  arm64: dts: juno: add information about L1 and L2 caches
  arm64: dts: juno: fix few unit address format warnings
  arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
  arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
  arm64: marvell: dts: add crypto engine description for 7k/8k
  arm64: dts: marvell: add sdhci support for Armada 7K/8K
  arm64: dts: marvell: add eMMC support for Armada 37xx
  arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
  arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
  arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
  arm64: dts: hisi: add SAS nodes for the hip07 SoC
  arm64: dts: hisi: add RoCE nodes for the hip07 SoC
  arm64: dts: hisi: add network related nodes for the hip07 SoC
  arm64: dts: hisi: add mbigen nodes for the hip07 SoC
  arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
  arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
  dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
  ...
上级 0ff4c01b 3c0e3abd
展开全部 隐藏空白更改
内联 并排
Showing with 11043 addition and 1401 deletion
Documentation/devicetree/bindings/arm/amlogic.txt
浏览文件 @ c6778ff8
......@@ -43,8 +43,11 @@ Board compatible values:
- "wetek,hub" (Meson gxbb)
- "wetek,play2" (Meson gxbb)
- "amlogic,p212" (Meson gxl s905x)
- "khadas,vim" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
- "hwacom,amazetv" (Meson gxl s905x)
- "amlogic,q200" (Meson gxm s912)
- "amlogic,q201" (Meson gxm s912)
- "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
......
Documentation/devicetree/bindings/arm/cavium-thunder2.txt 0 → 100644
浏览文件 @ c6778ff8
Cavium ThunderX2 CN99XX platform tree bindings
----------------------------------------------
Boards with Cavium ThunderX2 CN99XX SoC shall have the root property:
compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
These SoC uses the "cavium,thunder2" core which will be compatible
with "brcm,vulcan".
Documentation/devicetree/bindings/arm/cpus.txt
浏览文件 @ c6778ff8
......@@ -170,6 +170,7 @@ nodes to be present and contain the properties described below.
"brcm,brahma-b15"
"brcm,vulcan"
"cavium,thunder"
"cavium,thunder2"
"faraday,fa526"
"intel,sa110"
"intel,sa1100"
......
Documentation/devicetree/bindings/arm/fsl.txt
浏览文件 @ c6778ff8
......@@ -179,6 +179,18 @@ LS1046A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
LS1088A SoC
Required root node properties:
- compatible = "fsl,ls1088a";
LS1088A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
LS1088A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
LS2080A SoC
Required root node properties:
- compatible = "fsl,ls2080a";
......@@ -195,3 +207,14 @@ LS2080A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
LS2088A SoC
Required root node properties:
- compatible = "fsl,ls2088a";
LS2088A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
LS2088A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
浏览文件 @ c6778ff8
......@@ -4,6 +4,14 @@ Hi3660 SoC
Required root node properties:
- compatible = "hisilicon,hi3660";
Hi3798cv200 SoC
Required root node properties:
- compatible = "hisilicon,hi3798cv200";
Hi3798cv200 Poplar Board
Required root node properties:
- compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
Hi4511 Board
Required root node properties:
- compatible = "hisilicon,hi3620-hi4511";
......
Documentation/devicetree/bindings/arm/rockchip.txt
浏览文件 @ c6778ff8
......@@ -59,6 +59,17 @@ Rockchip platforms device tree bindings
- compatible = "google,veyron-brain-rev0", "google,veyron-brain",
"google,veyron", "rockchip,rk3288";
- Google Gru (dev-board):
Required root node properties:
- compatible = "google,gru-rev15", "google,gru-rev14",
"google,gru-rev13", "google,gru-rev12",
"google,gru-rev11", "google,gru-rev10",
"google,gru-rev9", "google,gru-rev8",
"google,gru-rev7", "google,gru-rev6",
"google,gru-rev5", "google,gru-rev4",
"google,gru-rev3", "google,gru-rev2",
"google,gru", "rockchip,rk3399";
- Google Jaq (Haier Chromebook 11 and more):
Required root node properties:
- compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
......@@ -73,6 +84,15 @@ Rockchip platforms device tree bindings
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
- Google Kevin (Samsung Chromebook Plus):
Required root node properties:
- compatible = "google,kevin-rev15", "google,kevin-rev14",
"google,kevin-rev13", "google,kevin-rev12",
"google,kevin-rev11", "google,kevin-rev10",
"google,kevin-rev9", "google,kevin-rev8",
"google,kevin-rev7", "google,kevin-rev6",
"google,kevin", "google,gru", "rockchip,rk3399";
- Google Mickey (Asus Chromebit CS10):
Required root node properties:
- compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
......@@ -141,6 +161,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
- Rockchip RK3328 evb:
Required root node properties:
- compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
- Rockchip RK3399 evb:
Required root node properties:
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
......
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
浏览文件 @ c6778ff8
......@@ -5,7 +5,8 @@ controllers within the SoC.
Required Properties:
- compatible: should be "amlogic,gxbb-clkc"
- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
or "amlogic,gxl-clkc" for GXL and GXM SoC.
- reg: physical base address of the clock controller and length of memory
mapped region.
......
Documentation/devicetree/bindings/clock/qoriq-clock.txt
浏览文件 @ c6778ff8
......@@ -35,6 +35,7 @@ Required properties:
* "fsl,ls1021a-clockgen"
* "fsl,ls1043a-clockgen"
* "fsl,ls1046a-clockgen"
* "fsl,ls1088a-clockgen"
* "fsl,ls2080a-clockgen"
Chassis-version clock strings include:
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
......
Documentation/devicetree/bindings/soc/rockchip/grf.txt
浏览文件 @ c6778ff8
......@@ -18,6 +18,7 @@ Required Properties:
- "rockchip,rk3188-grf", "syscon": for rk3188
- "rockchip,rk3228-grf", "syscon": for rk3228
- "rockchip,rk3288-grf", "syscon": for rk3288
- "rockchip,rk3328-grf", "syscon": for rk3328
- "rockchip,rk3368-grf", "syscon": for rk3368
- "rockchip,rk3399-grf", "syscon": for rk3399
- compatible: PMUGRF should be one of the following:
......
Documentation/devicetree/bindings/vendor-prefixes.txt
浏览文件 @ c6778ff8
......@@ -139,6 +139,7 @@ holt Holt Integrated Circuits, Inc.
honeywell Honeywell
hp Hewlett Packard
holtek Holtek Semiconductor, Inc.
hwacom HwaCom Systems Inc.
i2se I2SE GmbH
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
......@@ -162,6 +163,7 @@ jedec JEDEC Solid State Technology Association
karo Ka-Ro electronics GmbH
keithkoep Keith & Koep GmbH
keymile Keymile GmbH
khadas Khadas
kinetic Kinetic Technologies
kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
......
arch/arm/boot/dts/meson8.dtsi
浏览文件 @ c6778ff8
......@@ -106,6 +106,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_cbus 0 0 120>;
};
spi_nor_pins: nor {
......@@ -148,6 +149,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_aobus 0 120 16>;
};
uart_ao_a_pins: uart_ao_a {
......
arch/arm/boot/dts/meson8b.dtsi
浏览文件 @ c6778ff8
......@@ -198,6 +198,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_cbus 0 0 130>;
};
};
......@@ -215,6 +216,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_aobus 0 130 16>;
};
uart_ao_a_pins: uart_ao_a {
......
arch/arm/boot/dts/sunxi-h3-h5.dtsi
浏览文件 @ c6778ff8
......@@ -68,31 +68,12 @@
clock-output-names = "osc32k";
};
apb0: apb0_clk {
compatible = "fixed-factor-clock";
iosc: internal-osc-clk {
#clock-cells = <0>;
clock-div = <1>;
clock-mult = <1>;
clocks = <&osc24M>;
clock-output-names = "apb0";
};
apb0_gates: clk@01f01428 {
compatible = "allwinner,sun8i-h3-apb0-gates-clk",
"allwinner,sun4i-a10-gates-clk";
reg = <0x01f01428 0x4>;
#clock-cells = <1>;
clocks = <&apb0>;
clock-indices = <0>, <1>;
clock-output-names = "apb0_pio", "apb0_ir";
};
ir_clk: ir_clk@01f01454 {
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01f01454 0x4>;
#clock-cells = <0>;
clocks = <&osc32k>, <&osc24M>;
clock-output-names = "ir";
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-accuracy = <300000000>;
clock-output-names = "iosc";
};
};
......@@ -576,9 +557,12 @@
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
apb0_reset: reset@01f014b0 {
reg = <0x01f014b0 0x4>;
compatible = "allwinner,sun6i-a31-clock-reset";
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
clocks = <&osc24M>, <&osc32k>, <&iosc>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
};
......@@ -589,9 +573,9 @@
ir: ir@01f02000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&apb0_gates 1>, <&ir_clk>;
clocks = <&r_ccu 4>, <&r_ccu 11>;
clock-names = "apb", "ir";
resets = <&apb0_reset 1>;
resets = <&r_ccu 0>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01f02000 0x40>;
status = "disabled";
......@@ -601,9 +585,8 @@
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
resets = <&apb0_reset 0>;
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
......
arch/arm64/boot/dts/allwinner/Makefile
浏览文件 @ c6778ff8
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
......
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
浏览文件 @ c6778ff8
......@@ -98,6 +98,14 @@
clock-output-names = "osc32k";
};
iosc: internal-osc-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-accuracy = <300000000>;
clock-output-names = "iosc";
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
......@@ -394,5 +402,26 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
clocks = <&osc24M>, <&osc32k>, <&iosc>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
};
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
};
};
};
arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts 0 → 100644
浏览文件 @ c6778ff8
/*
* Copyright (C) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun50i-h5.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi PC 2";
compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pwr {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
status {
label = "orangepi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
};
r-gpio-keys {
compatible = "gpio-keys";
sw4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
reg_usb0_vbus: usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
};
&codec {
allwinner,audio-routing =
"Line Out", "LINEOUT",
"MIC1", "Mic",
"Mic", "MBIAS";
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&ehci2 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&ohci2 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
/* USB Type-A ports' VBUS is always on */
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
usb0_vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi 0 → 100644
浏览文件 @ c6778ff8
/*
* Copyright (C) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sunxi-h3-h5.dtsi"
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
};
cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
};
cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
};
cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <3>;
enable-method = "psci";
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};
&ccu {
compatible = "allwinner,sun50i-h5-ccu";
};
&mmc0 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc";
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc";
};
&mmc1 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc";
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
clock-names = "ahb", "mmc";
};
&mmc2 {
compatible = "allwinner,sun50i-h5-emmc",
"allwinner,sun50i-a64-emmc";
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
clock-names = "ahb", "mmc";
};
&pio {
compatible = "allwinner,sun50i-h5-pinctrl";
};
arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi 0 → 120000
浏览文件 @ c6778ff8
../../../../arm/boot/dts/sunxi-h3-h5.dtsi
\ No newline at end of file
arch/arm64/boot/dts/amlogic/Makefile
浏览文件 @ c6778ff8
......@@ -7,9 +7,11 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
......
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
浏览文件 @ c6778ff8
......@@ -98,6 +98,27 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
};
/* This UART is brought out to the DB9 connector */
......@@ -188,3 +209,21 @@
&ethmac {
status = "okay";
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
arch/arm64/boot/dts/amlogic/meson-gx.dtsi
浏览文件 @ c6778ff8
......@@ -71,6 +71,14 @@
reg = <0x0 0x10000000 0x0 0x200000>;
no-map;
};
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0x0 0xbc00000>;
alignment = <0x0 0x400000>;
linux,cma-default;
};
};
cpus {
......@@ -233,7 +241,7 @@
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson-gxbb-i2c";
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
......@@ -279,7 +287,7 @@
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gxbb-i2c";
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
......@@ -288,7 +296,7 @@
};
i2c_C: i2c@87e0 {
compatible = "amlogic,meson-gxbb-i2c";
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
......@@ -296,6 +304,14 @@
status = "disabled";
};
spifc: spi@8c80 {
compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
watchdog@98d0 {
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
......@@ -317,7 +333,7 @@
};
sram: sram@c8000000 {
compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
......@@ -325,12 +341,12 @@
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "amlogic,meson-gxbb-scp-shmem";
compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
compatible = "amlogic,meson-gxbb-scp-shmem";
compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
......@@ -342,6 +358,13 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
clkc_AO: clock-controller@040 {
compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
reg = <0x0 0x00040 0x0 0x4>;
#clock-cells = <1>;
#reset-cells = <1>;
};
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
......@@ -358,6 +381,15 @@
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x500 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm_AO_ab: pwm@550 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x00550 0x0 0x10>;
......@@ -366,7 +398,7 @@
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
......@@ -386,7 +418,6 @@
};
};
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
......@@ -410,7 +441,6 @@
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
phy-mode = "rgmii";
status = "disabled";
};
......@@ -457,6 +487,38 @@
cvbs_vdac_port: port@0 {
reg = <0>;
};
/* HDMI-TX output port */
hdmi_tx_port: port@1 {
reg = <1>;
hdmi_tx_out: endpoint {
remote-endpoint = <&hdmi_tx_in>;
};
};
};
hdmi_tx: hdmi-tx@c883a000 {
compatible = "amlogic,meson-gx-dw-hdmi";
reg = <0x0 0xc883a000 0x0 0x1c>;
interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* VPU VENC Input */
hdmi_tx_venc_port: port@0 {
reg = <0>;
hdmi_tx_in: endpoint {
remote-endpoint = <&hdmi_tx_out>;
};
};
/* TMDS Output */
hdmi_tx_tmds_port: port@1 {
reg = <1>;
};
};
};
};
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
浏览文件 @ c6778ff8
......@@ -152,6 +152,17 @@
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
};
&uart_AO {
......@@ -164,7 +175,24 @@
status = "okay";
pinctrl-0 = <&eth_rmii_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rmii";
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@0 {
/* IC Plus IP101GR (0x02430c54) */
reg = <0>;
};
};
};
&ir {
......@@ -245,3 +273,15 @@
remote-endpoint = <&cvbs_connector_in>;
};
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
浏览文件 @ c6778ff8
......@@ -96,7 +96,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
......@@ -152,6 +152,13 @@
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
amlogic,tx-delay-ns = <2>;
mdio {
compatible = "snps,dwmac-mdio";
......@@ -165,6 +172,57 @@
};
};
&pinctrl_aobus {
gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
"USB HUB nRESET", "USB OTG Power En",
"J7 Header Pin2", "IR In", "J7 Header Pin4",
"J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
"HDMI CEC", "SYS LED";
};
&pinctrl_periphs {
gpio-line-names = /* Bank GPIOZ */
"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
"Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
"Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
"Eth PHY nRESET", "Eth PHY Intc",
/* Bank GPIOH */
"HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
/* Bank BOOT */
"eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
"eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
"eMMC Reset", "eMMC CMD",
"", "", "", "", "", "", "",
/* Bank CARD */
"SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
"SDCard D3", "SDCard D2", "SDCard Det",
/* Bank GPIODV */
"", "", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "", "",
"I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
"PWM D", "PWM B",
/* Bank GPIOY */
"Revision Bit0", "Revision Bit1", "",
"J2 Header Pin35", "", "", "", "J2 Header Pin36",
"J2 Header Pin31", "", "", "", "TF VDD En",
"J2 Header Pin32", "J2 Header Pin26", "", "",
/* Bank GPIOX */
"J2 Header Pin29", "J2 Header Pin24",
"J2 Header Pin23", "J2 Header Pin22",
"J2 Header Pin21", "J2 Header Pin18",
"J2 Header Pin33", "J2 Header Pin19",
"J2 Header Pin16", "J2 Header Pin15",
"J2 Header Pin12", "J2 Header Pin13",
"J2 Header Pin8", "J2 Header Pin10",
"", "", "", "", "",
"J2 Header Pin11", "", "J2 Header Pin7",
/* Bank GPIOCLK */
"", "", "", "",
/* GPIO_TEST_N */
"";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
......@@ -177,6 +235,21 @@
pinctrl-names = "default";
};
&gpio_ao {
/*
* WARNING: The USB Hub on the Odroid-C2 needs a reset signal
* to be turned high in order to be detected by the USB Controller
* This signal should be handled by a USB specific power sequence
* in order to reset the Hub when USB bus is powered down.
*/
usb-hub {
gpio-hog;
gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-hub-reset";
};
};
&usb0_phy {
status = "okay";
phy-supply = <&usb_otg_pwr>;
......@@ -194,6 +267,11 @@
status = "okay";
};
&saradc {
status = "okay";
vref-supply = <&vcc1v8>;
};
/* SD */
&sd_emmc_b {
status = "okay";
......
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
浏览文件 @ c6778ff8
......@@ -96,6 +96,31 @@
};
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@3 {
/* Micrel KSZ9031 (0x00221620) */
reg = <3>;
};
};
};
&i2c_B {
status = "okay";
pinctrl-0 = <&i2c_b_pins>;
......
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
浏览文件 @ c6778ff8
......@@ -50,3 +50,14 @@
compatible = "amlogic,p201", "amlogic,meson-gxbb";
model = "Amlogic Meson GXBB P201 Development Board";
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rmii_pins>;
pinctrl-names = "default";
phy-mode = "rmii";
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
};
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
浏览文件 @ c6778ff8
......@@ -135,6 +135,17 @@
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
};
/* This UART is brought out to the DB9 connector */
......@@ -144,12 +155,6 @@
pinctrl-names = "default";
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
......@@ -250,3 +255,15 @@
remote-endpoint = <&cvbs_connector_in>;
};
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
浏览文件 @ c6778ff8
......@@ -115,7 +115,6 @@
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ir {
......@@ -128,6 +127,26 @@
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
};
};
};
&usb0_phy {
......
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
浏览文件 @ c6778ff8
......@@ -64,3 +64,29 @@
status = "disabled";
};
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
};
};
};
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
浏览文件 @ c6778ff8
......@@ -87,6 +87,32 @@
};
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
};
};
};
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
......
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
浏览文件 @ c6778ff8
......@@ -97,17 +97,6 @@
};
};
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
};
&ethmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
......@@ -129,6 +118,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_aobus 0 0 14>;
};
uart_ao_a_pins: uart_ao_a {
......@@ -203,30 +193,62 @@
function = "pwm_ao_b";
};
};
};
clkc_AO: clock-controller@040 {
compatible = "amlogic,gxbb-aoclkc";
reg = <0x0 0x00040 0x0 0x4>;
#clock-cells = <1>;
#reset-cells = <1>;
};
i2s_am_clk_pins: i2s_am_clk {
mux {
groups = "i2s_am_clk";
function = "i2s_out_ao";
};
};
pwm_ab_AO: pwm@550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x0550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
i2s_out_ao_clk_pins: i2s_out_ao_clk {
mux {
groups = "i2s_out_ao_clk";
function = "i2s_out_ao";
};
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x500 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_AO_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
i2s_out_lr_clk_pins: i2s_out_lr_clk {
mux {
groups = "i2s_out_lr_clk";
function = "i2s_out_ao";
};
};
i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
mux {
groups = "i2s_out_ch01_ao";
function = "i2s_out_ao";
};
};
i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
mux {
groups = "i2s_out_ch23_ao";
function = "i2s_out_ao";
};
};
i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
mux {
groups = "i2s_out_ch45_ao";
function = "i2s_out_ao";
};
};
spdif_out_ao_6_pins: spdif_out_ao_6 {
mux {
groups = "spdif_out_ao_6";
function = "spdif_out_ao";
};
};
spdif_out_ao_13_pins: spdif_out_ao_13 {
mux {
groups = "spdif_out_ao_13";
function = "spdif_out_ao";
};
};
};
};
......@@ -245,6 +267,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 14 120>;
};
emmc_pins: emmc {
......@@ -467,6 +490,34 @@
function = "hdmi_i2c";
};
};
i2sout_ch23_y_pins: i2sout_ch23_y {
mux {
groups = "i2sout_ch23_y";
function = "i2s_out";
};
};
i2sout_ch45_y_pins: i2sout_ch45_y {
mux {
groups = "i2sout_ch45_y";
function = "i2s_out";
};
};
i2sout_ch67_y_pins: i2sout_ch67_y {
mux {
groups = "i2sout_ch67_y";
function = "i2s_out";
};
};
spdif_out_y_pins: spdif_out_y {
mux {
groups = "spdif_out_y";
function = "spdif_out";
};
};
};
};
......@@ -478,10 +529,51 @@
};
};
&apb {
mali: gpu@c0000 {
compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
reg = <0x0 0xc0000 0x0 0x40000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp", "gpmmu", "pp", "pmu",
"pp0", "ppmmu0", "pp1", "ppmmu1",
"pp2", "ppmmu2";
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
/*
* Mali clocking is provided by two identical clock paths
* MALI_0 and MALI_1 muxed to a single clock by a glitch
* free mux to safely change frequency while running.
*/
assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
<&clkc CLKID_MALI_0>,
<&clkc CLKID_MALI>; /* Glitch free mux */
assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
<0>, /* Do Nothing */
<&clkc CLKID_MALI_0>;
assigned-clock-rates = <0>, /* Do Nothing */
<666666666>,
<0>; /* Do Nothing */
};
};
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
&i2c_AO {
clocks = <&clkc CLKID_AO_I2C>;
};
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
......@@ -521,6 +613,10 @@
clock-names = "core", "clkin0", "clkin1";
};
&spifc {
clocks = <&clkc CLKID_SPI>;
};
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
......@@ -529,3 +625,15 @@
clocks = <&clkc CLKID_RNG0>;
clock-names = "core";
};
&hdmi_tx {
compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
resets = <&reset RESET_HDMITX_CAPB3>,
<&reset RESET_HDMI_SYSTEM_RESET>,
<&reset RESET_HDMI_TX>;
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
clocks = <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_CLK81>,
<&clkc CLKID_GCLK_VENCI_INT0>;
clock-names = "isfr", "iahb", "venci";
};
arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi 0 → 100644
浏览文件 @ c6778ff8
/*
* Copyright (c) 2017 BayLibre SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
&apb {
mali: gpu@c0000 {
compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
reg = <0x0 0xc0000 0x0 0x40000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp", "gpmmu", "pp", "pmu",
"pp0", "ppmmu0", "pp1", "ppmmu1",
"pp2", "ppmmu2";
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
/*
* Mali clocking is provided by two identical clock paths
* MALI_0 and MALI_1 muxed to a single clock by a glitch
* free mux to safely change frequency while running.
*/
assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
<&clkc CLKID_MALI_0>,
<&clkc CLKID_MALI>; /* Glitch free mux */
assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
<0>, /* Do Nothing */
<&clkc CLKID_MALI_0>;
assigned-clock-rates = <0>, /* Do Nothing */
<666666666>,
<0>; /* Do Nothing */
};
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
浏览文件 @ c6778ff8
......@@ -43,12 +43,47 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "meson-gxl-s905d.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905D) P230 Development Board";
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1710000>;
button-function {
label = "Update";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <10000>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
};
};
vddio_ao18: regulator-vddio_ao18 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
/* P230 has exclusive choice between internal or external PHY */
......@@ -59,6 +94,8 @@
/* Select external PHY by default */
phy-handle = <&external_phy>;
amlogic,tx-delay-ns = <2>;
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
......@@ -75,3 +112,8 @@
max-speed = <1000>;
};
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao18>;
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
浏览文件 @ c6778ff8
......@@ -42,6 +42,7 @@
*/
#include "meson-gxl.dtsi"
#include "meson-gxl-mali.dtsi"
/ {
compatible = "amlogic,s905d", "amlogic,meson-gxl";
......
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts 0 → 100644
浏览文件 @ c6778ff8
/*
* Copyright (c) 2017 Carlo Caione
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@kernel.org>
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
#include "meson-gxl-s905x.dtsi"
/ {
compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
model = "Hwacom AmazeTV (S905X)";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
vddio_card: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "VDDIO_CARD";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
&ethmac {
status = "okay";
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts 0 → 100644
浏览文件 @ c6778ff8
/*
* Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
model = "Khadas VIM";
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1710000>;
button-function {
label = "Function";
linux,code = <KEY_FN>;
press-threshold-microvolt = <10000>;
};
};
aliases {
serial2 = &uart_AO_B;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
};
};
pwmleds {
compatible = "pwm-leds";
power {
label = "vim:red:power";
pwms = <&pwm_AO_ab 1 7812500 0>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
};
};
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default";
};
&i2c_B {
status = "okay";
pinctrl-0 = <&i2c_b_pins>;
pinctrl-names = "default";
rtc: rtc@51 {
/* has to be enabled manually when a battery is connected: */
status = "disabled";
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
};
};
&ir {
linux,rc-map-name = "rc-geekbox";
};
&pwm_AO_ab {
status = "okay";
pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&pwm_ef {
pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
};
&sd_emmc_a {
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
&uart_AO {
status = "okay";
};
/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
&uart_AO_B {
status = "okay";
pinctrl-0 = <&uart_ao_b_pins>;
pinctrl-names = "default";
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
浏览文件 @ c6778ff8
......@@ -127,6 +127,17 @@
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
};
&uart_AO {
......@@ -219,3 +230,15 @@
remote-endpoint = <&cvbs_connector_in>;
};
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
浏览文件 @ c6778ff8
......@@ -43,23 +43,26 @@
/dts-v1/;
#include "meson-gxl-s905x.dtsi"
#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
aliases {
serial0 = &uart_AO;
};
cvbs-connector {
compatible = "composite-video-connector";
chosen {
stdout-path = "serial0:115200n8";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
......
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi 0 → 100644
浏览文件 @ c6778ff8
/*
* Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
* Based on meson-gx-p23x-q20x.dtsi:
* - Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
* - Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/* Common DTSI for devices which are based on the P212 reference board. */
#include "meson-gxl-s905x.dtsi"
/ {
aliases {
serial0 = &uart_AO;
serial1 = &uart_A;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vddio_ao18: regulator-vddio_ao18 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
&ethmac {
status = "okay";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao18>;
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
/* This is connected to the Bluetooth module: */
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
浏览文件 @ c6778ff8
......@@ -42,6 +42,7 @@
*/
#include "meson-gxl.dtsi"
#include "meson-gxl-mali.dtsi"
/ {
compatible = "amlogic,s905x", "amlogic,meson-gxl";
......
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
浏览文件 @ c6778ff8
......@@ -44,6 +44,7 @@
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
/ {
compatible = "amlogic,meson-gxl";
......@@ -79,6 +80,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_aobus 0 0 14>;
};
uart_ao_a_pins: uart_ao_a {
......@@ -103,6 +105,13 @@
};
};
uart_ao_b_0_1_pins: uart_ao_b_0_1 {
mux {
groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
......@@ -118,12 +127,69 @@
};
};
i2c_ao_pins: i2c_ao {
mux {
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
};
};
pwm_ao_a_3_pins: pwm_ao_a_3 {
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a";
};
};
pwm_ao_a_8_pins: pwm_ao_a_8 {
mux {
groups = "pwm_ao_a_8";
function = "pwm_ao_a";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
pwm_ao_b_6_pins: pwm_ao_b_6 {
mux {
groups = "pwm_ao_b_6";
function = "pwm_ao_b";
};
};
i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
mux {
groups = "i2s_out_ch23_ao";
function = "i2s_out_ao";
};
};
i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
mux {
groups = "i2s_out_ch45_ao";
function = "i2s_out_ao";
};
};
spdif_out_ao_6_pins: spdif_out_ao_6 {
mux {
groups = "spdif_out_ao_6";
function = "spdif_out_ao";
};
};
spdif_out_ao_9_pins: spdif_out_ao_9 {
mux {
groups = "spdif_out_ao_9";
function = "spdif_out_ao";
};
};
};
};
......@@ -142,6 +208,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 14 101>;
};
emmc_pins: emmc {
......@@ -154,6 +221,16 @@
};
};
nor_pins: nor {
mux {
groups = "nor_d",
"nor_q",
"nor_c",
"nor_cs";
function = "nor";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
......@@ -277,6 +354,34 @@
};
};
pwm_a_pins: pwm_a {
mux {
groups = "pwm_a";
function = "pwm_a";
};
};
pwm_b_pins: pwm_b {
mux {
groups = "pwm_b";
function = "pwm_b";
};
};
pwm_c_pins: pwm_c {
mux {
groups = "pwm_c";
function = "pwm_c";
};
};
pwm_d_pins: pwm_d {
mux {
groups = "pwm_d";
function = "pwm_d";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
......@@ -284,6 +389,20 @@
};
};
pwm_f_clk_pins: pwm_f_clk {
mux {
groups = "pwm_f_clk";
function = "pwm_f";
};
};
pwm_f_x_pins: pwm_f_x {
mux {
groups = "pwm_f_x";
function = "pwm_f";
};
};
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
......@@ -297,6 +416,61 @@
function = "hdmi_i2c";
};
};
i2s_am_clk_pins: i2s_am_clk {
mux {
groups = "i2s_am_clk";
function = "i2s_out";
};
};
i2s_out_ao_clk_pins: i2s_out_ao_clk {
mux {
groups = "i2s_out_ao_clk";
function = "i2s_out";
};
};
i2s_out_lr_clk_pins: i2s_out_lr_clk {
mux {
groups = "i2s_out_lr_clk";
function = "i2s_out";
};
};
i2s_out_ch01_pins: i2s_out_ch01 {
mux {
groups = "i2s_out_ch01";
function = "i2s_out";
};
};
i2sout_ch23_z_pins: i2sout_ch23_z {
mux {
groups = "i2sout_ch23_z";
function = "i2s_out";
};
};
i2sout_ch45_z_pins: i2sout_ch45_z {
mux {
groups = "i2sout_ch45_z";
function = "i2s_out";
};
};
i2sout_ch67_z_pins: i2sout_ch67_z {
mux {
groups = "i2sout_ch67_z";
function = "i2s_out";
};
};
spdif_out_h_pins: spdif_out_ao_h {
mux {
groups = "spdif_out_h";
function = "spdif_out";
};
};
};
eth-phy-mux {
......@@ -339,6 +513,10 @@
clocks = <&clkc CLKID_I2C>;
};
&i2c_AO {
clocks = <&clkc CLKID_AO_I2C>;
};
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
......@@ -378,6 +556,22 @@
clock-names = "core", "clkin0", "clkin1";
};
&spifc {
clocks = <&clkc CLKID_SPI>;
};
&vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
};
&hdmi_tx {
compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
resets = <&reset RESET_HDMITX_CAPB3>,
<&reset RESET_HDMI_SYSTEM_RESET>,
<&reset RESET_HDMI_TX>;
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
clocks = <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_CLK81>,
<&clkc CLKID_GCLK_VENCI_INT0>;
clock-names = "isfr", "iahb", "venci";
};
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
浏览文件 @ c6778ff8
......@@ -100,6 +100,17 @@
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
};
/* This UART is brought out to the DB9 connector */
......@@ -162,6 +173,8 @@
/* Select external PHY by default */
phy-handle = <&external_phy>;
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
......@@ -183,3 +196,15 @@
remote-endpoint = <&cvbs_connector_in>;
};
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
浏览文件 @ c6778ff8
......@@ -43,12 +43,47 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "meson-gxm.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm";
model = "Amlogic Meson GXM (S912) Q200 Development Board";
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1710000>;
button-function {
label = "Update";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <10000>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
};
};
vddio_ao18: regulator-vddio_ao18 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
/* Q200 has exclusive choice between internal or external PHY */
......@@ -59,6 +94,8 @@
/* Select external PHY by default */
phy-handle = <&external_phy>;
amlogic,tx-delay-ns = <2>;
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
......@@ -75,3 +112,8 @@
max-speed = <1000>;
};
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao18>;
};
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
浏览文件 @ c6778ff8
......@@ -130,3 +130,6 @@
compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
};
&hdmi_tx {
compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
};
arch/arm64/boot/dts/arm/juno-base.dtsi
浏览文件 @ c6778ff8
......@@ -428,7 +428,7 @@
};
};
pcie_ctlr: pcie-controller@40000000 {
pcie_ctlr: pcie@40000000 {
compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
device_type = "pci";
reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
......@@ -699,7 +699,7 @@
<0x00000008 0x80000000 0x1 0x80000000>;
};
smb@08000000 {
smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
......
arch/arm64/boot/dts/arm/juno-motherboard.dtsi
浏览文件 @ c6778ff8
......@@ -137,7 +137,7 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
v2m_sysctl: sysctl@020000 {
v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
......@@ -148,7 +148,7 @@
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
apbregs@010000 {
apbregs@10000 {
compatible = "syscon", "simple-mfd";
reg = <0x010000 0x1000>;
......@@ -216,7 +216,7 @@
};
};
mmci@050000 {
mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <5>;
......@@ -228,7 +228,7 @@
clock-names = "mclk", "apb_pclk";
};
kmi@060000 {
kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <8>;
......@@ -236,7 +236,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@070000 {
kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <8>;
......@@ -244,7 +244,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
wdt@0f0000 {
wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x10000>;
interrupts = <7>;
......
arch/arm64/boot/dts/arm/juno-r1.dts
浏览文件 @ c6778ff8
......@@ -89,6 +89,12 @@
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -100,6 +106,12 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -111,6 +123,12 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -122,6 +140,12 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -133,6 +157,12 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -144,6 +174,12 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -152,10 +188,16 @@
A57_L2: l2-cache0 {
compatible = "cache";
cache-size = <0x200000>;
cache-line-size = <64>;
cache-sets = <2048>;
};
A53_L2: l2-cache1 {
compatible = "cache";
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
};
......
arch/arm64/boot/dts/arm/juno-r2.dts
浏览文件 @ c6778ff8
......@@ -89,6 +89,12 @@
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&A72_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -100,6 +106,12 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&A72_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -111,6 +123,12 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -122,6 +140,12 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -133,6 +157,12 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -144,6 +174,12 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -152,10 +188,16 @@
A72_L2: l2-cache0 {
compatible = "cache";
cache-size = <0x200000>;
cache-line-size = <64>;
cache-sets = <2048>;
};
A53_L2: l2-cache1 {
compatible = "cache";
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
};
......
arch/arm64/boot/dts/arm/juno.dts
浏览文件 @ c6778ff8
......@@ -88,6 +88,12 @@
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -99,6 +105,12 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -110,6 +122,12 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -121,6 +139,12 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -132,6 +156,12 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -143,6 +173,12 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
......@@ -151,10 +187,16 @@
A57_L2: l2-cache0 {
compatible = "cache";
cache-size = <0x200000>;
cache-line-size = <64>;
cache-sets = <2048>;
};
A53_L2: l2-cache1 {
compatible = "cache";
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
};
......
arch/arm64/boot/dts/broadcom/Makefile
浏览文件 @ c6778ff8
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
......
arch/arm64/boot/dts/broadcom/ns2-svk.dts
浏览文件 @ c6778ff8
......@@ -57,55 +57,55 @@
};
&enet {
status = "ok";
status = "okay";
};
&pci_phy0 {
status = "ok";
status = "okay";
};
&pci_phy1 {
status = "ok";
status = "okay";
};
&pcie0 {
status = "ok";
status = "okay";
};
&pcie4 {
status = "ok";
status = "okay";
};
&pcie8 {
status = "ok";
status = "okay";
};
&i2c0 {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
};
&uart1 {
status = "ok";
status = "okay";
};
&uart2 {
status = "ok";
status = "okay";
};
&uart3 {
status = "ok";
status = "okay";
};
&ssp0 {
status = "ok";
status = "okay";
slic@0 {
compatible = "silabs,si3226x";
......@@ -126,7 +126,7 @@
};
&ssp1 {
status = "ok";
status = "okay";
at25@0 {
compatible = "atmel,at25";
......@@ -150,23 +150,23 @@
};
&sata_phy0 {
status = "ok";
status = "okay";
};
&sata_phy1 {
status = "ok";
status = "okay";
};
&sata {
status = "ok";
status = "okay";
};
&sdio0 {
status = "ok";
status = "okay";
};
&sdio1 {
status = "ok";
status = "okay";
};
&nand {
......
arch/arm64/boot/dts/broadcom/ns2-xmc.dts
浏览文件 @ c6778ff8
......@@ -54,15 +54,15 @@
};
&enet {
status = "ok";
status = "okay";
};
&i2c0 {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
};
&mdio_mux_iproc {
......@@ -122,27 +122,27 @@
};
&pci_phy0 {
status = "ok";
status = "okay";
};
&pcie0 {
status = "ok";
status = "okay";
};
&pcie8 {
status = "ok";
status = "okay";
};
&sata_phy0 {
status = "ok";
status = "okay";
};
&sata_phy1 {
status = "ok";
status = "okay";
};
&sata {
status = "ok";
status = "okay";
};
&qspi {
......@@ -187,5 +187,5 @@
};
&uart3 {
status = "ok";
status = "okay";
};
arch/arm64/boot/dts/broadcom/ns2.dtsi
浏览文件 @ c6778ff8
......@@ -222,6 +222,12 @@
brcm,use-bcm-hdr;
};
crypto0: crypto@612d0000 {
compatible = "brcm,spum-crypto";
reg = <0x612d0000 0x900>;
mboxes = <&pdc0 0>;
};
pdc1: iproc-pdc1@612e0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x612e0000 0x445>; /* PDC FS1 regs */
......@@ -232,6 +238,12 @@
brcm,use-bcm-hdr;
};
crypto1: crypto@612f0000 {
compatible = "brcm,spum-crypto";
reg = <0x612f0000 0x900>;
mboxes = <&pdc1 0>;
};
pdc2: iproc-pdc2@61300000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61300000 0x445>; /* PDC FS2 regs */
......@@ -242,6 +254,12 @@
brcm,use-bcm-hdr;
};
crypto2: crypto@61310000 {
compatible = "brcm,spum-crypto";
reg = <0x61310000 0x900>;
mboxes = <&pdc2 0>;
};
pdc3: iproc-pdc3@61320000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61320000 0x445>; /* PDC FS3 regs */
......@@ -252,6 +270,12 @@
brcm,use-bcm-hdr;
};
crypto3: crypto@61330000 {
compatible = "brcm,spum-crypto";
reg = <0x61330000 0x900>;
mboxes = <&pdc3 0>;
};
dma0: dma@61360000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>;
......
arch/arm64/boot/dts/cavium/Makefile
浏览文件 @ c6778ff8
dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
dtb-$(CONFIG_ARCH_THUNDER2) += thunder2-99xx.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
......
arch/arm64/boot/dts/broadcom/vulcan-eval.dts → arch/arm64/boot/dts/cavium/thunder2-99xx.dts
浏览文件 @ c6778ff8
/*
* dts file for Broadcom (BRCM) Vulcan Evaluation Platform
* dts file for Cavium ThunderX2 CN99XX Evaluation Platform
*
* Copyright (c) 2017 Cavium Inc.
* Copyright (c) 2013-2016 Broadcom
*
* This program is free software; you can redistribute it and/or
......@@ -11,11 +12,11 @@
/dts-v1/;
#include "vulcan.dtsi"
#include "thunder2-99xx.dtsi"
/ {
model = "Broadcom Vulcan Eval Platform";
compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
model = "Cavium ThunderX2 CN99XX";
compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
memory {
device_type = "memory";
......
arch/arm64/boot/dts/broadcom/vulcan.dtsi → arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
浏览文件 @ c6778ff8
/*
* dtsi file for Broadcom (BRCM) Vulcan processor
* dtsi file for Cavium ThunderX2 CN99XX processor
*
* Copyright (c) 2017 Cavium Inc.
* Copyright (c) 2013-2016 Broadcom
* Author: Zi Shen Lim <zlim@broadcom.com>
*
......@@ -13,8 +14,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "Broadcom Vulcan";
compatible = "brcm,vulcan-soc";
model = "Cavium ThunderX2 CN99XX";
compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
......@@ -26,28 +27,28 @@
cpu@0 {
device_type = "cpu";
compatible = "brcm,vulcan", "arm,armv8";
compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu@1 {
device_type = "cpu";
compatible = "brcm,vulcan", "arm,armv8";
compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu@2 {
device_type = "cpu";
compatible = "brcm,vulcan", "arm,armv8";
compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu@3 {
device_type = "cpu";
compatible = "brcm,vulcan", "arm,armv8";
compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
};
......
arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
浏览文件 @ c6778ff8
......@@ -94,27 +94,27 @@
compatible = "operating-points-v2";
opp-shared;
opp@400000000 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1075000>;
};
opp@267000000 {
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <1000000>;
};
opp@200000000 {
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <975000>;
};
opp@160000000 {
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <962500>;
};
opp@134000000 {
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <950000>;
};
opp@100000000 {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <937500>;
};
......@@ -123,19 +123,19 @@
bus_g2d_266_opp_table: opp_table3 {
compatible = "operating-points-v2";
opp@267000000 {
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
};
opp@200000000 {
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp@160000000 {
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
opp@134000000 {
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
opp@100000000 {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
......@@ -143,13 +143,13 @@
bus_gscl_opp_table: opp_table4 {
compatible = "operating-points-v2";
opp@333000000 {
opp-333000000 {
opp-hz = /bits/ 64 <333000000>;
};
opp@222000000 {
opp-222000000 {
opp-hz = /bits/ 64 <222000000>;
};
opp@166500000 {
opp-166500000 {
opp-hz = /bits/ 64 <166500000>;
};
};
......@@ -158,22 +158,22 @@
compatible = "operating-points-v2";
opp-shared;
opp@400000000 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
opp@267000000 {
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
};
opp@200000000 {
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp@160000000 {
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
opp@134000000 {
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
opp@100000000 {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
......@@ -181,16 +181,16 @@
bus_noc2_opp_table: opp_table6 {
compatible = "operating-points-v2";
opp@400000000 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
opp@200000000 {
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp@134000000 {
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
opp@100000000 {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
......
arch/arm64/boot/dts/exynos/exynos5433.dtsi
浏览文件 @ c6778ff8
......@@ -119,43 +119,43 @@
compatible = "operating-points-v2";
opp-shared;
opp@400000000 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <900000>;
};
opp@500000000 {
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <925000>;
};
opp@600000000 {
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000>;
};
opp@700000000 {
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <975000>;
};
opp@800000000 {
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
};
opp@900000000 {
opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1050000>;
};
opp@1000000000 {
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1075000>;
};
opp@1100000000 {
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1112500>;
};
opp@1200000000 {
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1112500>;
};
opp@1300000000 {
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1150000>;
};
......@@ -165,63 +165,63 @@
compatible = "operating-points-v2";
opp-shared;
opp@500000000 {
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <900000>;
};
opp@600000000 {
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000>;
};
opp@700000000 {
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <912500>;
};
opp@800000000 {
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <912500>;
};
opp@900000000 {
opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <937500>;
};
opp@1000000000 {
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000>;
};
opp@1100000000 {
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1012500>;
};
opp@1200000000 {
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1037500>;
};
opp@1300000000 {
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1062500>;
};
opp@1400000000 {
opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1087500>;
};
opp@1500000000 {
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1125000>;
};
opp@1600000000 {
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <1137500>;
};
opp@1700000000 {
opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
opp-microvolt = <1175000>;
};
opp@1800000000 {
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1212500>;
};
opp@1900000000 {
opp-1900000000 {
opp-hz = /bits/ 64 <1900000000>;
opp-microvolt = <1262500>;
};
......
arch/arm64/boot/dts/freescale/Makefile
浏览文件 @ c6778ff8
......@@ -5,9 +5,13 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
......
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
浏览文件 @ c6778ff8
......@@ -113,3 +113,7 @@
&sai2 {
status = "okay";
};
&sata {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
浏览文件 @ c6778ff8
......@@ -126,3 +126,7 @@
&sai2 {
status = "okay";
};
&sata {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
浏览文件 @ c6778ff8
......@@ -57,3 +57,7 @@
&i2c0 {
status = "okay";
};
&sata {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
浏览文件 @ c6778ff8
......@@ -42,7 +42,8 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "fsl,ls1012a";
......@@ -50,6 +51,15 @@
#address-cells = <2>;
#size-cells = <2>;
aliases {
crypto = &crypto;
rtic_a = &rtic_a;
rtic_b = &rtic_b;
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
......@@ -113,6 +123,95 @@
big-endian;
};
crypto: crypto@1700000 {
compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
"fsl,sec-v4.0";
fsl,sec-era = <8>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x00 0x1700000 0x100000>;
reg = <0x00 0x1700000 0x0 0x100000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
};
rtic@60000 {
compatible = "fsl,sec-v5.4-rtic",
"fsl,sec-v5.0-rtic",
"fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x60000 0x100 0x60e00 0x18>;
ranges = <0x0 0x60100 0x500>;
rtic_a: rtic-a@0 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x00 0x20 0x100 0x100>;
};
rtic_b: rtic-b@20 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x20 0x20 0x200 0x100>;
};
rtic_c: rtic-c@40 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x40 0x20 0x300 0x100>;
};
rtic_d: rtic-d@60 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x60 0x20 0x400 0x100>;
};
};
};
sec_mon: sec_mon@1e90000 {
compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
"fsl,sec-v4.0-mon";
reg = <0x0 0x1e90000 0x0 0x10000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
};
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1012a-dcfg",
"syscon";
......@@ -127,6 +226,82 @@
clocks = <&sysclk>;
};
tmu: tmu@1f00000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
fsl,tmu-calibration = <0x00000000 0x00000026
0x00000001 0x0000002d
0x00000002 0x00000032
0x00000003 0x00000039
0x00000004 0x0000003f
0x00000005 0x00000046
0x00000006 0x0000004d
0x00000007 0x00000054
0x00000008 0x0000005a
0x00000009 0x00000061
0x0000000a 0x0000006a
0x0000000b 0x00000071
0x00010000 0x00000025
0x00010001 0x0000002c
0x00010002 0x00000035
0x00010003 0x0000003d
0x00010004 0x00000045
0x00010005 0x0000004e
0x00010006 0x00000057
0x00010007 0x00000061
0x00010008 0x0000006b
0x00010009 0x00000076
0x00020000 0x00000029
0x00020001 0x00000033
0x00020002 0x0000003d
0x00020003 0x00000049
0x00020004 0x00000056
0x00020005 0x00000061
0x00020006 0x0000006d
0x00030000 0x00000021
0x00030001 0x0000002a
0x00030002 0x0000003c
0x00030003 0x0000004e>;
big-endian;
#thermal-sensor-cells = <1>;
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert: cpu-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
};
};
};
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
......@@ -238,9 +413,12 @@
sata: sata@3200000 {
compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
reg = <0x0 0x3200000 0x0 0x10000>,
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>;
dma-coherent;
status = "disabled";
};
};
......
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
浏览文件 @ c6778ff8
......@@ -582,7 +582,9 @@
sata: sata@3200000 {
compatible = "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
reg = <0x0 0x3200000 0x0 0x10000>,
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 0x4>;
clocks = <&clockgen 4 0>;
dma-coherent;
......
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
浏览文件 @ c6778ff8
......@@ -587,7 +587,9 @@
sata: sata@3200000 {
compatible = "fsl,ls1046a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
reg = <0x0 0x3200000 0x0 0x10000>,
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
};
......
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts 0 → 100644
浏览文件 @ c6778ff8
/*
* Device Tree file for NXP LS1088A QDS Board.
*
* Copyright 2017 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls1088a.dtsi"
/ {
model = "LS1088A QDS Board";
compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
};
&i2c0 {
status = "okay";
i2c-switch@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
temp-sensor@4c {
compatible = "adi,adt7461a";
reg = <0x4c>;
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
/* IRQ10_B */
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
};
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x57>;
};
};
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&sata {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts 0 → 100644
浏览文件 @ c6778ff8
/*
* Device Tree file for NXP LS1088A RDB Board.
*
* Copyright 2017 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls1088a.dtsi"
/ {
model = "L1088A RDB Board";
compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
};
&i2c0 {
status = "okay";
i2c-switch@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
temp-sensor@4c {
compatible = "adi,adt7461a";
reg = <0x4c>;
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
/* IRQ10_B */
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&sata {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi 0 → 100644
浏览文件 @ c6778ff8
/*
* Device Tree Include file for NXP Layerscape-1088A family SoC.
*
* Copyright 2017 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1088a";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
/* We have 2 clusters having 4 Cortex-A53 cores each */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
clocks = <&clockgen 1 0>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
clocks = <&clockgen 1 0>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
clocks = <&clockgen 1 0>;
};
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x100>;
clocks = <&clockgen 1 1>;
};
cpu5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x101>;
clocks = <&clockgen 1 1>;
};
cpu6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x102>;
clocks = <&clockgen 1 1>;
};
cpu7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x103>;
clocks = <&clockgen 1 1>;
};
};
gic: interrupt-controller@6000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
<0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
<0x0 0x0c0c0000 0 0x2000>, /* GICC */
<0x0 0x0c0d0000 0 0x1000>, /* GICH */
<0x0 0x0c0e0000 0 0x20000>; /* GICV */
interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
<1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
<1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
<1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
};
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "sysclk";
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
clockgen: clocking@1300000 {
compatible = "fsl,ls1088a-clockgen";
reg = <0 0x1300000 0 0xa0000>;
#clock-cells = <2>;
clocks = <&sysclk>;
};
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
clocks = <&clockgen 4 3>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
clocks = <&clockgen 4 3>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
gpio0: gpio@2300000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@2310000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@2320000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@2330000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
ifc: ifc@2240000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x2240000 0x0 0x20000>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
little-endian;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x5 0x80000000 0x08000000
2 0 0x5 0x30000000 0x00010000
3 0 0x5 0x20000000 0x00010000>;
status = "disabled";
};
i2c0: i2c@2000000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
i2c1: i2c@2010000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
i2c2: i2c@2020000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
i2c3: i2c@2030000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
sata: sata@3200000 {
compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
status = "disabled";
};
};
};
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
浏览文件 @ c6778ff8
/*
* Device Tree file for Freescale LS2080a QDS Board.
*
* Copyright (C) 2015, Freescale Semiconductor
* Copyright (C) 2015-17, Freescale Semiconductor
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* This file is dual-licensed: you can use it either under the terms
......@@ -47,6 +48,7 @@
/dts-v1/;
#include "fsl-ls2080a.dtsi"
#include "fsl-ls208xa-qds.dtsi"
/ {
model = "Freescale Layerscape 2080a QDS Board";
......@@ -61,154 +63,3 @@
stdout-path = "serial0:115200n8";
};
};
&esdhc {
status = "okay";
};
&ifc {
status = "okay";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0x0 0x0 0x5 0x80000000 0x08000000
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
cpld@3,0 {
reg = <0x3 0x0 0x10000>;
compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
};
};
&i2c0 {
status = "okay";
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x00>;
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x02>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <500>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
adt7481@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
};
};
&i2c1 {
status = "disabled";
};
&i2c2 {
status = "disabled";
};
&i2c3 {
status = "disabled";
};
&dspi {
status = "okay";
dflash0: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
dflash1: sst25wf040b {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <1>;
};
dflash2: en25s64 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <2>;
};
};
&qspi {
status = "okay";
flash0: s25fl256s1@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
reg = <0>;
};
flash2: s25fl256s1@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
浏览文件 @ c6778ff8
/*
* Device Tree file for Freescale LS2080a RDB Board.
*
* Copyright (C) 2015, Freescale Semiconductor
* Copyright (C) 2016-17, Freescale Semiconductor
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* This file is dual-licensed: you can use it either under the terms
......@@ -47,6 +48,7 @@
/dts-v1/;
#include "fsl-ls2080a.dtsi"
#include "fsl-ls208xa-rdb.dtsi"
/ {
model = "Freescale Layerscape 2080a RDB Board";
......@@ -61,109 +63,3 @@
stdout-path = "serial1:115200n8";
};
};
&esdhc {
status = "okay";
};
&ifc {
status = "okay";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0x0 0x0 0x5 0x80000000 0x08000000
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
cpld@3,0 {
reg = <0x3 0x0 0x10000>;
compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
};
};
&i2c0 {
status = "okay";
pca9547@75 {
compatible = "nxp,pca9547";
reg = <0x75>;
#address-cells = <1>;
#size-cells = <0>;
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x01>;
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
adt7481@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
};
};
&i2c1 {
status = "disabled";
};
&i2c2 {
status = "disabled";
};
&i2c3 {
status = "disabled";
};
&dspi {
status = "okay";
dflash0: n25q512a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
};
&qspi {
status = "disabled";
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts 0 → 100644
浏览文件 @ c6778ff8
/*
* Device Tree file for Freescale LS2088A QDS Board.
*
* Copyright (C) 2016-17, Freescale Semiconductor
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls2088a.dtsi"
#include "fsl-ls208xa-qds.dtsi"
/ {
model = "Freescale Layerscape 2088A QDS Board";
compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
aliases {
serial0 = &serial0;
serial1 = &serial1;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts 0 → 100644
浏览文件 @ c6778ff8
/*
* Device Tree file for Freescale LS2088A RDB Board.
*
* Copyright (C) 2016-17, Freescale Semiconductor
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls2088a.dtsi"
#include "fsl-ls208xa-rdb.dtsi"
/ {
model = "Freescale Layerscape 2088A RDB Board";
compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
aliases {
serial0 = &serial0;
serial1 = &serial1;
};
chosen {
stdout-path = "serial1:115200n8";
};
};
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi 0 → 100644
浏览文件 @ c6778ff8
/*
* Device Tree Include file for Freescale Layerscape-2088A family SoC.
*
* Copyright (C) 2016-17, Freescale Semiconductor
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "fsl-ls208xa.dtsi"
&cpu {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
clocks = <&clockgen 1 0>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
clocks = <&clockgen 1 0>;
next-level-cache = <&cluster0_l2>;
};
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x100>;
clocks = <&clockgen 1 1>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
};
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x101>;
clocks = <&clockgen 1 1>;
next-level-cache = <&cluster1_l2>;
};
cpu4: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x200>;
clocks = <&clockgen 1 2>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
};
cpu5: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x201>;
clocks = <&clockgen 1 2>;
next-level-cache = <&cluster2_l2>;
};
cpu6: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x300>;
clocks = <&clockgen 1 3>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
};
cpu7: cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x301>;
clocks = <&clockgen 1 3>;
next-level-cache = <&cluster3_l2>;
};
cluster0_l2: l2-cache0 {
compatible = "cache";
};
cluster1_l2: l2-cache1 {
compatible = "cache";
};
cluster2_l2: l2-cache2 {
compatible = "cache";
};
cluster3_l2: l2-cache3 {
compatible = "cache";
};
};
&pcie1 {
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x20 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>;
};
&pcie2 {
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x28 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>;
};
&pcie3 {
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x30 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>;
};
&pcie4 {
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x38 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>;
};
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi 0 → 100644
浏览文件 @ c6778ff8
/*
* Device Tree file for Freescale LS2080A QDS Board.
*
* Copyright (C) 2016-17, Freescale Semiconductor
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
&esdhc {
status = "okay";
};
&ifc {
status = "okay";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0x0 0x0 0x5 0x80000000 0x08000000
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
cpld@3,0 {
reg = <0x3 0x0 0x10000>;
compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
};
};
&i2c0 {
status = "okay";
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x00>;
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x02>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <500>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
adt7481@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
};
};
&i2c1 {
status = "disabled";
};
&i2c2 {
status = "disabled";
};
&i2c3 {
status = "disabled";
};
&dspi {
status = "okay";
dflash0: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
dflash1: sst25wf040b {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <1>;
};
dflash2: en25s64 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <2>;
};
};
&qspi {
status = "okay";
flash0: s25fl256s1@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
reg = <0>;
};
flash2: s25fl256s1@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi 0 → 100644
浏览文件 @ c6778ff8
/*
* Device Tree file for Freescale LS2080A RDB Board.
*
* Copyright (C) 2016-17, Freescale Semiconductor
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
&esdhc {
status = "okay";
};
&ifc {
status = "okay";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0x0 0x0 0x5 0x80000000 0x08000000
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
cpld@3,0 {
reg = <0x3 0x0 0x10000>;
compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
};
};
&i2c0 {
status = "okay";
pca9547@75 {
compatible = "nxp,pca9547";
reg = <0x75>;
#address-cells = <1>;
#size-cells = <0>;
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x01>;
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
adt7481@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
};
};
&i2c1 {
status = "disabled";
};
&i2c2 {
status = "disabled";
};
&i2c3 {
status = "disabled";
};
&dspi {
status = "okay";
dflash0: n25q512a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
};
&qspi {
status = "disabled";
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/rockchip/rk3328-evb.dts 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/rockchip/rk3328.dtsi 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/sprd/Makefile
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/sprd/sc9860.dtsi 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/sprd/sp9860g-1h10.dts 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
arch/arm64/boot/dts/sprd/whale2.dtsi 0 → 100644
浏览文件 @ c6778ff8
此差异已折叠。
drivers/clk/meson/gxbb.h
浏览文件 @ c6778ff8
此差异已折叠。
include/dt-bindings/pinctrl/hisi.h
浏览文件 @ c6778ff8
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或