提交 c534107f 编写于 作者: M Mark Brown

Merge branch 'topic/ac97' of...

Merge branch 'topic/ac97' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-ac97
...@@ -3,12 +3,15 @@ ...@@ -3,12 +3,15 @@
# subsystems should select the appropriate symbols. # subsystems should select the appropriate symbols.
config REGMAP config REGMAP
default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_MMIO || REGMAP_IRQ) default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
select LZO_COMPRESS select LZO_COMPRESS
select LZO_DECOMPRESS select LZO_DECOMPRESS
select IRQ_DOMAIN if REGMAP_IRQ select IRQ_DOMAIN if REGMAP_IRQ
bool bool
config REGMAP_AC97
tristate
config REGMAP_I2C config REGMAP_I2C
tristate tristate
depends on I2C depends on I2C
......
obj-$(CONFIG_REGMAP) += regmap.o regcache.o obj-$(CONFIG_REGMAP) += regmap.o regcache.o
obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o
obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o
......
/*
* Register map access API - AC'97 support
*
* Copyright 2013 Linaro Ltd. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <sound/ac97_codec.h>
bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case AC97_RESET:
case AC97_POWERDOWN:
case AC97_INT_PAGING:
case AC97_EXTENDED_ID:
case AC97_EXTENDED_STATUS:
case AC97_EXTENDED_MID:
case AC97_EXTENDED_MSTATUS:
case AC97_GPIO_STATUS:
case AC97_MISC_AFE:
case AC97_VENDOR_ID1:
case AC97_VENDOR_ID2:
case AC97_CODEC_CLASS_REV:
case AC97_PCI_SVID:
case AC97_PCI_SID:
case AC97_FUNC_SELECT:
case AC97_FUNC_INFO:
case AC97_SENSE_INFO:
return true;
default:
return false;
}
}
EXPORT_SYMBOL_GPL(regmap_ac97_default_volatile);
static int regmap_ac97_reg_read(void *context, unsigned int reg,
unsigned int *val)
{
struct snd_ac97 *ac97 = context;
*val = ac97->bus->ops->read(ac97, reg);
return 0;
}
static int regmap_ac97_reg_write(void *context, unsigned int reg,
unsigned int val)
{
struct snd_ac97 *ac97 = context;
ac97->bus->ops->write(ac97, reg, val);
return 0;
}
static const struct regmap_bus ac97_regmap_bus = {
.reg_write = regmap_ac97_reg_write,
.reg_read = regmap_ac97_reg_read,
};
/**
* regmap_init_ac97(): Initialise AC'97 register map
*
* @ac97: Device that will be interacted with
* @config: Configuration for register map
*
* The return value will be an ERR_PTR() on error or a valid pointer to
* a struct regmap.
*/
struct regmap *regmap_init_ac97(struct snd_ac97 *ac97,
const struct regmap_config *config)
{
return regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config);
}
EXPORT_SYMBOL_GPL(regmap_init_ac97);
/**
* devm_regmap_init_ac97(): Initialise AC'97 register map
*
* @ac97: Device that will be interacted with
* @config: Configuration for register map
*
* The return value will be an ERR_PTR() on error or a valid pointer
* to a struct regmap. The regmap will be automatically freed by the
* device management code.
*/
struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97,
const struct regmap_config *config)
{
return devm_regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config);
}
EXPORT_SYMBOL_GPL(devm_regmap_init_ac97);
MODULE_LICENSE("GPL v2");
...@@ -27,6 +27,7 @@ struct spmi_device; ...@@ -27,6 +27,7 @@ struct spmi_device;
struct regmap; struct regmap;
struct regmap_range_cfg; struct regmap_range_cfg;
struct regmap_field; struct regmap_field;
struct snd_ac97;
/* An enum of all the supported cache types */ /* An enum of all the supported cache types */
enum regcache_type { enum regcache_type {
...@@ -340,6 +341,8 @@ struct regmap *regmap_init_spmi_ext(struct spmi_device *dev, ...@@ -340,6 +341,8 @@ struct regmap *regmap_init_spmi_ext(struct spmi_device *dev,
struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id, struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs, void __iomem *regs,
const struct regmap_config *config); const struct regmap_config *config);
struct regmap *regmap_init_ac97(struct snd_ac97 *ac97,
const struct regmap_config *config);
struct regmap *devm_regmap_init(struct device *dev, struct regmap *devm_regmap_init(struct device *dev,
const struct regmap_bus *bus, const struct regmap_bus *bus,
...@@ -356,6 +359,10 @@ struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *dev, ...@@ -356,6 +359,10 @@ struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *dev,
struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id, struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs, void __iomem *regs,
const struct regmap_config *config); const struct regmap_config *config);
struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97,
const struct regmap_config *config);
bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
/** /**
* regmap_init_mmio(): Initialise register map * regmap_init_mmio(): Initialise register map
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册