提交 c529aa30 编写于 作者: J Jon Mason

NTB: Xeon Doorbell errata workaround

Modifications to the 14th bit of the B2BDOORBELL register will not be
mirrored to the remote system due to a hardware issue.  To get around
the issue, shrink the number of available doorbell bits by 1.  The max
number of doorbells was being used as a way to referencing the Link
Doorbell bit.  Since this would no longer work, the driver must now
explicitly reference that bit.

This does not affect the xeon_errata_workaround case, as it is not using
the b2bdoorbell register.
Signed-off-by: NJon Mason <jon.mason@intel.com>
上级 5e01dc7b
......@@ -678,6 +678,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
return -EINVAL;
ndev->limits.max_mw = SNB_ERRATA_MAX_MW;
ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->reg_ofs.spad_write = ndev->mw[1].vbase +
SNB_SPAD_OFFSET;
ndev->reg_ofs.rdb = ndev->mw[1].vbase +
......@@ -690,6 +691,13 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
SNB_PBAR4LMT_OFFSET);
} else {
ndev->limits.max_mw = SNB_MAX_MW;
/* HW Errata on bit 14 of b2bdoorbell register. Writes
* will not be mirrored to the remote system. Shrink
* the number of bits by one, since bit 14 is the last
* bit.
*/
ndev->limits.max_db_bits = SNB_MAX_DB_BITS - 1;
ndev->reg_ofs.spad_write = ndev->reg_base +
SNB_B2B_SPAD_OFFSET;
ndev->reg_ofs.rdb = ndev->reg_base +
......@@ -769,6 +777,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
* have an equal amount.
*/
ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
/* Note: The SDOORBELL is the cause of the errata. You REALLY
* don't want to touch it.
*/
......@@ -793,6 +802,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
* have an equal amount.
*/
ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->reg_ofs.rdb = ndev->reg_base + SNB_PDOORBELL_OFFSET;
ndev->reg_ofs.ldb = ndev->reg_base + SNB_SDOORBELL_OFFSET;
ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_SDBMSK_OFFSET;
......@@ -819,7 +829,6 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
ndev->reg_ofs.lnk_stat = ndev->reg_base + SNB_SLINK_STATUS_OFFSET;
ndev->reg_ofs.spci_cmd = ndev->reg_base + SNB_PCICMD_OFFSET;
ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->limits.msix_cnt = SNB_MSIX_CNT;
ndev->bits_per_vector = SNB_DB_BITS_PER_VEC;
......@@ -986,7 +995,7 @@ static irqreturn_t xeon_event_msix_irq(int irq, void *dev)
dev_err(&ndev->pdev->dev, "Error determining link status\n");
/* bit 15 is always the link bit */
writew(1 << ndev->limits.max_db_bits, ndev->reg_ofs.ldb);
writew(1 << SNB_LINK_DB, ndev->reg_ofs.ldb);
return IRQ_HANDLED;
}
......@@ -1176,9 +1185,10 @@ static int ntb_setup_interrupts(struct ntb_device *ndev)
*/
if (ndev->hw_type == BWD_HW)
writeq(~0, ndev->reg_ofs.ldb_mask);
else
writew(~(1 << ndev->limits.max_db_bits),
ndev->reg_ofs.ldb_mask);
else {
u16 var = 1 << SNB_LINK_DB;
writew(~var, ndev->reg_ofs.ldb_mask);
}
rc = ntb_setup_msix(ndev);
if (!rc)
......
......@@ -55,6 +55,7 @@
#define SNB_MAX_COMPAT_SPADS 16
/* Reserve the uppermost bit for link interrupt */
#define SNB_MAX_DB_BITS 15
#define SNB_LINK_DB 15
#define SNB_DB_BITS_PER_VEC 5
#define SNB_MAX_MW 2
#define SNB_ERRATA_MAX_MW 1
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册