kvm: Documentation: remove ia64

kvm/ia64 is gone, clean up Documentation too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Documentation/ia64/kvm.txt

-Currently, kvm module is in EXPERIMENTAL stage on IA64. This means that
-interfaces are not stable enough to use. So, please don't run critical
-applications in virtual machine.
-We will try our best to improve it in future versions!
-
-				Guide: How to boot up guests on kvm/ia64
-
-This guide is to describe how to enable kvm support for IA-64 systems.
-
-1. Get the kvm source from git.kernel.org.
-	Userspace source:
-		git clone git://git.kernel.org/pub/scm/virt/kvm/kvm-userspace.git
-	Kernel Source:
-		git clone git://git.kernel.org/pub/scm/linux/kernel/git/xiantao/kvm-ia64.git
-
-2. Compile the source code.
-	2.1 Compile userspace code:
-		(1)cd ./kvm-userspace
-		(2)./configure
-		(3)cd kernel
-		(4)make sync LINUX= $kernel_dir (kernel_dir is the directory of kernel source.)
-		(5)cd ..
-		(6)make qemu
-		(7)cd qemu; make install
-
-	2.2 Compile kernel source code:
-		(1) cd ./$kernel_dir
-		(2) Make menuconfig
-		(3) Enter into virtualization option, and choose kvm.
-		(4) make
-		(5) Once (4) done, make modules_install
-		(6) Make initrd, and use new kernel to reboot up host machine.
-		(7) Once (6) done, cd $kernel_dir/arch/ia64/kvm
-		(8) insmod kvm.ko; insmod kvm-intel.ko
-
-Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qemu, otherwise, may fail.
-
-3. Get Guest Firmware named as Flash.fd, and put it under right place:
-	(1) If you have the guest firmware (binary) released by Intel Corp for Xen, use it directly.
-
-	(2) If you have no firmware at hand, Please download its source from
-		hg clone http://xenbits.xensource.com/ext/efi-vfirmware.hg
-	    you can get the firmware's binary in the directory of efi-vfirmware.hg/binaries.
-
-	(3) Rename the firmware you owned to Flash.fd, and copy it to /usr/local/share/qemu
-
-4. Boot up Linux or Windows guests:
-	4.1 Create or install a image for guest boot. If you have xen experience, it should be easy.
-
-	4.2 Boot up guests use the following command.
-		/usr/local/bin/qemu-system-ia64 -smp xx -m 512 -hda $your_image
-		(xx is the number of virtual processors for the guest, now the maximum value is 4)
-
-5. Known possible issue on some platforms with old Firmware.
-
-In the event of strange host crash issues, try to solve it through either of the following ways:
-
-(1): Upgrade your Firmware to the latest one.
-
-(2): Applying the below patch to kernel source.
-diff --git a/arch/ia64/kernel/pal.S b/arch/ia64/kernel/pal.S
-index 0b53344..f02b0f7 100644
---- a/arch/ia64/kernel/pal.S
-+++ b/arch/ia64/kernel/pal.S
-@@ -84,7 +84,8 @@ GLOBAL_ENTRY(ia64_pal_call_static)
-	mov ar.pfs = loc1
-	mov rp = loc0
-	;;
--	srlz.d				// serialize restoration of psr.l
-+	srlz.i			// serialize restoration of psr.l
-+	;;
-	br.ret.sptk.many b0
- END(ia64_pal_call_static)
-
-6. Bug report:
-	If you found any issues when use kvm/ia64, Please post the bug info to kvm-ia64-devel mailing list.
-	https://lists.sourceforge.net/lists/listinfo/kvm-ia64-devel/
-
-Thanks for your interest! Let's work together, and make kvm/ia64 stronger and stronger!
-
-
-								Xiantao Zhang <xiantao.zhang@intel.com>
-											2008.3.10

Documentation/virtual/kvm/api.txt

@@ -607,7 +607,7 @@ struct kvm_fpu {
 4.24 KVM_CREATE_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP, KVM_CAP_S390_IRQCHIP (s390)
-Architectures: x86, ia64, ARM, arm64, s390
+Architectures: x86, ARM, arm64, s390
 Type: vm ioctl
 Parameters: none
 Returns: 0 on success, -1 on error
@@ -615,7 +615,7 @@ Returns: 0 on success, -1 on error
 Creates an interrupt controller model in the kernel.  On x86, creates a virtual
 ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
 local APIC.  IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
-only go to the IOAPIC.  On ia64, a IOSAPIC is created. On ARM/arm64, a GIC is
+only go to the IOAPIC.  On ARM/arm64, a GIC is
 created. On s390, a dummy irq routing table is created.
 
 Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be enabled
@@ -625,7 +625,7 @@ before KVM_CREATE_IRQCHIP can be used.
 4.25 KVM_IRQ_LINE
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64, arm, arm64
+Architectures: x86, arm, arm64
 Type: vm ioctl
 Parameters: struct kvm_irq_level
 Returns: 0 on success, -1 on error
@@ -679,7 +679,7 @@ struct kvm_irq_level {
 4.26 KVM_GET_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_irqchip (in/out)
 Returns: 0 on success, -1 on error
@@ -701,7 +701,7 @@ struct kvm_irqchip {
 4.27 KVM_SET_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_irqchip (in)
 Returns: 0 on success, -1 on error
@@ -994,7 +994,7 @@ for vm-wide capabilities.
 4.38 KVM_GET_MP_STATE
 
 Capability: KVM_CAP_MP_STATE
-Architectures: x86, ia64, s390
+Architectures: x86, s390
 Type: vcpu ioctl
 Parameters: struct kvm_mp_state (out)
 Returns: 0 on success; -1 on error
@@ -1008,16 +1008,15 @@ uniprocessor guests).
 
 Possible values are:
 
- - KVM_MP_STATE_RUNNABLE:        the vcpu is currently running [x86, ia64]
+ - KVM_MP_STATE_RUNNABLE:        the vcpu is currently running [x86]
  - KVM_MP_STATE_UNINITIALIZED:   the vcpu is an application processor (AP)
-                                 which has not yet received an INIT signal [x86,
-                                 ia64]
+                                 which has not yet received an INIT signal [x86]
  - KVM_MP_STATE_INIT_RECEIVED:   the vcpu has received an INIT signal, and is
-                                 now ready for a SIPI [x86, ia64]
+                                 now ready for a SIPI [x86]
  - KVM_MP_STATE_HALTED:          the vcpu has executed a HLT instruction and
-                                 is waiting for an interrupt [x86, ia64]
+                                 is waiting for an interrupt [x86]
  - KVM_MP_STATE_SIPI_RECEIVED:   the vcpu has just received a SIPI (vector
-                                 accessible via KVM_GET_VCPU_EVENTS) [x86, ia64]
+                                 accessible via KVM_GET_VCPU_EVENTS) [x86]
  - KVM_MP_STATE_STOPPED:         the vcpu is stopped [s390]
  - KVM_MP_STATE_CHECK_STOP:      the vcpu is in a special error state [s390]
  - KVM_MP_STATE_OPERATING:       the vcpu is operating (running or halted)
@@ -1025,7 +1024,7 @@ Possible values are:
  - KVM_MP_STATE_LOAD:            the vcpu is in a special load/startup state
                                  [s390]
 
-On x86 and ia64, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
+On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
 in-kernel irqchip, the multiprocessing state must be maintained by userspace on
 these architectures.
 
@@ -1033,7 +1032,7 @@ these architectures.
 4.39 KVM_SET_MP_STATE
 
 Capability: KVM_CAP_MP_STATE
-Architectures: x86, ia64, s390
+Architectures: x86, s390
 Type: vcpu ioctl
 Parameters: struct kvm_mp_state (in)
 Returns: 0 on success; -1 on error
@@ -1041,7 +1040,7 @@ Returns: 0 on success; -1 on error
 Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for
 arguments.
 
-On x86 and ia64, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
+On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
 in-kernel irqchip, the multiprocessing state must be maintained by userspace on
 these architectures.
 
@@ -1068,7 +1067,7 @@ documentation when it pops into existence).
 4.41 KVM_SET_BOOT_CPU_ID
 
 Capability: KVM_CAP_SET_BOOT_CPU_ID
-Architectures: x86, ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: unsigned long vcpu_id
 Returns: 0 on success, -1 on error
@@ -1261,7 +1260,7 @@ The flags bitmap is defined as:
 4.48 KVM_ASSIGN_PCI_DEVICE
 
 Capability: none
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_pci_dev (in)
 Returns: 0 on success, -1 on error
@@ -1311,7 +1310,7 @@ Errors:
 4.49 KVM_DEASSIGN_PCI_DEVICE
 
 Capability: none
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_pci_dev (in)
 Returns: 0 on success, -1 on error
@@ -1330,7 +1329,7 @@ Errors:
 4.50 KVM_ASSIGN_DEV_IRQ
 
 Capability: KVM_CAP_ASSIGN_DEV_IRQ
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_irq (in)
 Returns: 0 on success, -1 on error
@@ -1370,7 +1369,7 @@ Errors:
 4.51 KVM_DEASSIGN_DEV_IRQ
 
 Capability: KVM_CAP_ASSIGN_DEV_IRQ
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_irq (in)
 Returns: 0 on success, -1 on error
@@ -1385,7 +1384,7 @@ KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
 4.52 KVM_SET_GSI_ROUTING
 
 Capability: KVM_CAP_IRQ_ROUTING
-Architectures: x86 ia64 s390
+Architectures: x86 s390
 Type: vm ioctl
 Parameters: struct kvm_irq_routing (in)
 Returns: 0 on success, -1 on error
@@ -1444,7 +1443,7 @@ struct kvm_irq_routing_s390_adapter {
 4.53 KVM_ASSIGN_SET_MSIX_NR
 
 Capability: none
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_msix_nr (in)
 Returns: 0 on success, -1 on error
@@ -1466,7 +1465,7 @@ struct kvm_assigned_msix_nr {
 4.54 KVM_ASSIGN_SET_MSIX_ENTRY
 
 Capability: none
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_msix_entry (in)
 Returns: 0 on success, -1 on error