提交 c2b7aefd 编写于 作者: R Rafał Miłecki 提交者: John W. Linville

b43: N-PHY: turn radio on/off (rfkill)

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 8987a9e9
......@@ -218,7 +218,10 @@ static void b43_radio_init2055_post(struct b43_wldev *dev)
b43_radio_write16(dev, B2055_C2_RX_BB_MIDACHP, 0x83);
}
/* Initialize a Broadcom 2055 N-radio */
/*
* Initialize a Broadcom 2055 N-radio
* http://bcm-v4.sipsolutions.net/802.11/Radio/2055/Init
*/
static void b43_radio_init2055(struct b43_wldev *dev)
{
b43_radio_init2055_pre(dev);
......@@ -229,17 +232,6 @@ static void b43_radio_init2055(struct b43_wldev *dev)
b43_radio_init2055_post(dev);
}
void b43_nphy_radio_turn_on(struct b43_wldev *dev)
{
b43_radio_init2055(dev);
}
void b43_nphy_radio_turn_off(struct b43_wldev *dev)
{
b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
~B43_NPHY_RFCTL_CMD_EN);
}
/*
* Upload the N-PHY tables.
* http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
......@@ -3277,9 +3269,41 @@ static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
}
/* http://bcm-v4.sipsolutions.net/802.11/Radio/Switch%20Radio */
static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
bool blocked)
{//TODO
{
if (b43_read32(dev, B43_MMIO_MACCTL) & B43_MACCTL_ENABLED)
b43err(dev->wl, "MAC not suspended\n");
if (blocked) {
b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
~B43_NPHY_RFCTL_CMD_CHIP0PU);
if (dev->phy.rev >= 3) {
b43_radio_mask(dev, 0x09, ~0x2);
b43_radio_write(dev, 0x204D, 0);
b43_radio_write(dev, 0x2053, 0);
b43_radio_write(dev, 0x2058, 0);
b43_radio_write(dev, 0x205E, 0);
b43_radio_mask(dev, 0x2062, ~0xF0);
b43_radio_write(dev, 0x2064, 0);
b43_radio_write(dev, 0x304D, 0);
b43_radio_write(dev, 0x3053, 0);
b43_radio_write(dev, 0x3058, 0);
b43_radio_write(dev, 0x305E, 0);
b43_radio_mask(dev, 0x3062, ~0xF0);
b43_radio_write(dev, 0x3064, 0);
}
} else {
if (dev->phy.rev >= 3) {
/* TODO: b43_radio_init2056(dev); */
/* TODO: PHY Set Channel Spec (dev, radio_chanspec) */
} else {
b43_radio_init2055(dev);
}
}
}
static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册