Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 c244e08c 编写于 作者: R Rafał Miłecki 提交者： John W. Linville
浏览文件
操作

b43: bus: abstract chip info 

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 a18c715e
隐藏空白更改
内联 并排
Showing with 28 addition and 25 deletion
drivers/net/wireless/b43/bus.c
浏览文件 @ c244e08c
......@@ -74,6 +74,10 @@ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev)
dev->dma_dev = sdev->dma_dev;
dev->irq = sdev->irq;
dev->chip_id = sdev->bus->chip_id;
dev->chip_rev = sdev->bus->chip_rev;
dev->chip_pkg = sdev->bus->chip_package;
dev->bus_sprom = &sdev->bus->sprom;
dev->core_id = sdev->id.coreid;
......
drivers/net/wireless/b43/bus.h
浏览文件 @ c244e08c
......@@ -24,6 +24,10 @@ struct b43_bus_dev {
struct device *dma_dev;
unsigned int irq;
u16 chip_id;
u8 chip_rev;
u8 chip_pkg;
struct ssb_sprom *bus_sprom;
u16 core_id;
......
drivers/net/wireless/b43/main.c
浏览文件 @ c244e08c
......@@ -2588,7 +2588,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
mask = 0x0000001F;
set = 0x0000000F;
if (dev->sdev->bus->chip_id == 0x4301) {
if (dev->dev->chip_id == 0x4301) {
mask |= 0x0060;
set |= 0x0060;
}
......@@ -2748,8 +2748,8 @@ static void b43_adjust_opmode(struct b43_wldev *dev)
cfp_pretbtt = 2;
if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
if (dev->sdev->bus->chip_id == 0x4306 &&
dev->sdev->bus->chip_rev == 3)
if (dev->dev->chip_id == 0x4306 &&
dev->dev->chip_rev == 3)
cfp_pretbtt = 100;
else
cfp_pretbtt = 50;
......@@ -4096,10 +4096,10 @@ static int b43_phy_versioning(struct b43_wldev *dev)
analog_type, phy_type, phy_rev);
/* Get RADIO versioning */
if (dev->sdev->bus->chip_id == 0x4317) {
if (dev->sdev->bus->chip_rev == 0)
if (dev->dev->chip_id == 0x4317) {
if (dev->dev->chip_rev == 0)
tmp = 0x3205017F;
else if (dev->sdev->bus->chip_rev == 1)
else if (dev->dev->chip_rev == 1)
tmp = 0x4205017F;
else
tmp = 0x5205017F;
......
drivers/net/wireless/b43/phy_g.c
浏览文件 @ c244e08c
......@@ -2088,8 +2088,8 @@ static void b43_phy_initg(struct b43_wldev *dev)
/* FIXME: The spec says in the following if, the 0 should be replaced
'if OFDM may not be used in the current locale'
but OFDM is legal everywhere */
if ((dev->sdev->bus->chip_id == 0x4306
&& dev->sdev->bus->chip_package == 2) || 0) {
if ((dev->dev->chip_id == 0x4306
&& dev->dev->chip_pkg == 2) || 0) {
b43_phy_mask(dev, B43_PHY_CRS0, 0xBFFF);
b43_phy_mask(dev, B43_PHY_OFDM(0xC3), 0x7FFF);
}
......@@ -2203,7 +2203,7 @@ static void default_radio_attenuation(struct b43_wldev *dev,
&& bus->boardinfo.type ==
SSB_BOARD_BU4306)
rf->att = 5;
else if (bus->chip_id == 0x4320)
else if (dev->dev->chip_id == 0x4320)
rf->att = 4;
else
rf->att = 3;
......@@ -2388,7 +2388,7 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev)
pab1 = (s16) (dev->dev->bus_sprom->pa0b1);
pab2 = (s16) (dev->dev->bus_sprom->pa0b2);
B43_WARN_ON((dev->sdev->bus->chip_id == 0x4301) &&
B43_WARN_ON((dev->dev->chip_id == 0x4301) &&
(phy->radio_ver != 0x2050)); /* Not supported anymore */
gphy->dyn_tssi_tbl = 0;
......
drivers/net/wireless/b43/phy_lp.c
浏览文件 @ c244e08c
......@@ -324,8 +324,8 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_8, B43_LPPHY_TR_LOOKUP_4);
}
if ((sprom->boardflags_hi & B43_BFH_FEM_BT) &&
(bus->chip_id == 0x5354) &&
(bus->chip_package == SSB_CHIPPACK_BCM4712S)) {
(dev->dev->chip_id == 0x5354) &&
(dev->dev->chip_pkg == SSB_CHIPPACK_BCM4712S)) {
b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0006);
b43_phy_write(dev, B43_LPPHY_GPIO_SELECT, 0x0005);
b43_phy_write(dev, B43_LPPHY_GPIO_OUTEN, 0xFFFF);
......@@ -450,7 +450,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFC1F, 0xA0);
b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
if ((dev->dev->chip_id == 0x4325) && (dev->dev->chip_rev == 0)) {
b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100);
b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA);
} else {
......@@ -468,7 +468,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);
if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
if ((dev->dev->chip_id == 0x4325) && (dev->dev->chip_rev == 0)) {
b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
}
......@@ -493,7 +493,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
0x2000 | ((u16)lpphy->rssi_gs << 10) |
((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
if ((dev->dev->chip_id == 0x4325) && (dev->dev->chip_rev == 0)) {
b43_phy_set(dev, B43_LPPHY_AFE_ADC_CTL_0, 0x1C);
b43_phy_maskset(dev, B43_LPPHY_AFE_CTL, 0x00FF, 0x8800);
b43_phy_maskset(dev, B43_LPPHY_AFE_ADC_CTL_1, 0xFC3C, 0x0400);
......@@ -698,7 +698,7 @@ static void lpphy_radio_init(struct b43_wldev *dev)
lpphy_sync_stx(dev);
b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80);
b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0);
if (dev->sdev->bus->chip_id == 0x4325) {
if (dev->dev->chip_id == 0x4325) {
// TODO SSB PMU recalibration
}
}
......@@ -1841,7 +1841,6 @@ static void lpphy_papd_cal(struct b43_wldev *dev, struct lpphy_tx_gains gains,
static void lpphy_papd_cal_txpwr(struct b43_wldev *dev)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
struct ssb_bus *bus = dev->sdev->bus;
struct lpphy_tx_gains gains, oldgains;
int old_txpctl, old_afe_ovr, old_rf, old_bbmult;
......@@ -1855,7 +1854,7 @@ static void lpphy_papd_cal_txpwr(struct b43_wldev *dev)
lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
if (bus->chip_id == 0x4325 && bus->chip_rev == 0)
if (dev->dev->chip_id == 0x4325 && dev->dev->chip_rev == 0)
lpphy_papd_cal(dev, gains, 0, 1, 30);
else
lpphy_papd_cal(dev, gains, 0, 1, 65);
......@@ -1871,7 +1870,6 @@ static int lpphy_rx_iq_cal(struct b43_wldev *dev, bool noise, bool tx,
bool rx, bool pa, struct lpphy_tx_gains *gains)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
struct ssb_bus *bus = dev->sdev->bus;
const struct lpphy_rx_iq_comp *iqcomp = NULL;
struct lpphy_tx_gains nogains, oldgains;
u16 tmp;
......@@ -1880,7 +1878,7 @@ static int lpphy_rx_iq_cal(struct b43_wldev *dev, bool noise, bool tx,
memset(&nogains, 0, sizeof(nogains));
memset(&oldgains, 0, sizeof(oldgains));
if (bus->chip_id == 0x5354) {
if (dev->dev->chip_id == 0x5354) {
for (i = 0; i < ARRAY_SIZE(lpphy_5354_iq_table); i++) {
if (lpphy_5354_iq_table[i].chan == lpphy->channel) {
iqcomp = &lpphy_5354_iq_table[i];
......@@ -2409,11 +2407,9 @@ static const struct b206x_channel b2063_chantbl[] = {
static void lpphy_b2062_reset_pll_bias(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
b43_radio_write(dev, B2062_S_RFPLL_CTL2, 0xFF);
udelay(20);
if (bus->chip_id == 0x5354) {
if (dev->dev->chip_id == 0x5354) {
b43_radio_write(dev, B2062_N_COMM1, 4);
b43_radio_write(dev, B2062_S_RFPLL_CTL2, 4);
} else {
......
drivers/net/wireless/b43/tables_lpphy.c
浏览文件 @ c244e08c
......@@ -2304,7 +2304,6 @@ void lpphy_rev0_1_table_init(struct b43_wldev *dev)
void lpphy_rev2plus_table_init(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
int i;
B43_WARN_ON(dev->phy.rev < 2);
......@@ -2341,7 +2340,7 @@ void lpphy_rev2plus_table_init(struct b43_wldev *dev)
b43_lptab_write_bulk(dev, B43_LPTAB32(10, 0),
ARRAY_SIZE(lpphy_papd_mult_table), lpphy_papd_mult_table);
if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
if ((dev->dev->chip_id == 0x4325) && (dev->dev->chip_rev == 0)) {
b43_lptab_write_bulk(dev, B43_LPTAB32(13, 0),
ARRAY_SIZE(lpphy_a0_gain_idx_table), lpphy_a0_gain_idx_table);
b43_lptab_write_bulk(dev, B43_LPTAB16(14, 0),
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或