clk: imx5: ipu_di_sel clocks can set parent rates

To obtain exact pixel clocks, allow the DI clock selectors to influence
the PLLs that they are derived from.

Commit 4591b132 ("ARM: i.MX6: ipu_di_sel clocks can set parent
rates") did this for i.MX6.
Port it to enable high display resolutions on i.MX53 based platforms
such as CX9020 Embedded PC, too.
Signed-off-by: NPatrick Brünn <p.bruenn@beckhoff.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

drivers/clk/imx/clk-imx51-imx53.c

@@ -519,10 +519,10 @@ static void __init mx53_clocks_init(struct device_node *np)
 						mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
 	clk[IMX5_CLK_LDB_DI0_GATE]	= imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
 	clk[IMX5_CLK_LDB_DI1_GATE]	= imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
-	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
-						mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
-	clk[IMX5_CLK_IPU_DI1_SEL]	= imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
-						mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux_flags("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+						mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel), CLK_SET_RATE_PARENT);
+	clk[IMX5_CLK_IPU_DI1_SEL]	= imx_clk_mux_flags("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+						mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel), CLK_SET_RATE_PARENT);
 	clk[IMX5_CLK_TVE_EXT_SEL]	= imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
 						mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
 	clk[IMX5_CLK_TVE_GATE]		= imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);