提交 c174e6d6 编写于 作者: D Dmitry Monakhov 提交者: Theodore Ts'o

ext4: fix transaction issues for ext4_fallocate and ext_zero_range

After commit f282ac19 we use different transactions for
preallocation and i_disksize update which result in complain from fsck
after power-failure.  spotted by generic/019. IMHO this is regression
because fs becomes inconsistent, even more 'e2fsck -p' will no longer
works (which drives admins go crazy) Same transaction requirement
applies ctime,mtime updates

testcase: xfstest generic/019
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
上级 69dc9536
......@@ -4665,7 +4665,8 @@ void ext4_ext_truncate(handle_t *handle, struct inode *inode)
}
static int ext4_alloc_file_blocks(struct file *file, ext4_lblk_t offset,
ext4_lblk_t len, int flags, int mode)
ext4_lblk_t len, loff_t new_size,
int flags, int mode)
{
struct inode *inode = file_inode(file);
handle_t *handle;
......@@ -4674,8 +4675,10 @@ static int ext4_alloc_file_blocks(struct file *file, ext4_lblk_t offset,
int retries = 0;
struct ext4_map_blocks map;
unsigned int credits;
loff_t epos;
map.m_lblk = offset;
map.m_len = len;
/*
* Don't normalize the request if it can fit in one extent so
* that it doesn't get unnecessarily split into multiple
......@@ -4690,9 +4693,7 @@ static int ext4_alloc_file_blocks(struct file *file, ext4_lblk_t offset,
credits = ext4_chunk_trans_blocks(inode, len);
retry:
while (ret >= 0 && ret < len) {
map.m_lblk = map.m_lblk + ret;
map.m_len = len = len - ret;
while (ret >= 0 && len) {
handle = ext4_journal_start(inode, EXT4_HT_MAP_BLOCKS,
credits);
if (IS_ERR(handle)) {
......@@ -4709,6 +4710,21 @@ static int ext4_alloc_file_blocks(struct file *file, ext4_lblk_t offset,
ret2 = ext4_journal_stop(handle);
break;
}
map.m_lblk += ret;
map.m_len = len = len - ret;
epos = (loff_t)map.m_lblk << inode->i_blkbits;
inode->i_ctime = ext4_current_time(inode);
if (new_size) {
if (epos > new_size)
epos = new_size;
if (ext4_update_inode_size(inode, epos) & 0x1)
inode->i_mtime = inode->i_ctime;
} else {
if (epos > inode->i_size)
ext4_set_inode_flag(inode,
EXT4_INODE_EOFBLOCKS);
}
ext4_mark_inode_dirty(handle, inode);
ret2 = ext4_journal_stop(handle);
if (ret2)
break;
......@@ -4732,7 +4748,7 @@ static long ext4_zero_range(struct file *file, loff_t offset,
int ret = 0;
int flags;
int credits;
int partial;
int partial_begin, partial_end;
loff_t start, end;
ext4_lblk_t lblk;
struct address_space *mapping = inode->i_mapping;
......@@ -4772,7 +4788,8 @@ static long ext4_zero_range(struct file *file, loff_t offset,
if (start < offset || end > offset + len)
return -EINVAL;
partial = (offset + len) & ((1 << blkbits) - 1);
partial_begin = offset & ((1 << blkbits) - 1);
partial_end = (offset + len) & ((1 << blkbits) - 1);
lblk = start >> blkbits;
max_blocks = (end >> blkbits);
......@@ -4806,7 +4823,7 @@ static long ext4_zero_range(struct file *file, loff_t offset,
* If we have a partial block after EOF we have to allocate
* the entire block.
*/
if (partial)
if (partial_end)
max_blocks += 1;
}
......@@ -4814,6 +4831,7 @@ static long ext4_zero_range(struct file *file, loff_t offset,
/* Now release the pages and zero block aligned part of pages*/
truncate_pagecache_range(inode, start, end - 1);
inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
/* Wait all existing dio workers, newcomers will block on i_mutex */
ext4_inode_block_unlocked_dio(inode);
......@@ -4826,11 +4844,14 @@ static long ext4_zero_range(struct file *file, loff_t offset,
if (ret)
goto out_dio;
ret = ext4_alloc_file_blocks(file, lblk, max_blocks, flags,
mode);
ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
flags, mode);
if (ret)
goto out_dio;
}
if (!partial_begin && !partial_end)
goto out_dio;
/*
* In worst case we have to writeout two nonadjacent unwritten
* blocks and update the inode
......@@ -4856,7 +4877,6 @@ static long ext4_zero_range(struct file *file, loff_t offset,
if ((offset + len) > i_size_read(inode))
ext4_set_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
}
ext4_mark_inode_dirty(handle, inode);
/* Zero out partial block at the edges of the range */
......@@ -4883,7 +4903,6 @@ static long ext4_zero_range(struct file *file, loff_t offset,
long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
{
struct inode *inode = file_inode(file);
handle_t *handle;
loff_t new_size = 0;
unsigned int max_blocks;
int ret = 0;
......@@ -4939,32 +4958,15 @@ long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
goto out;
}
ret = ext4_alloc_file_blocks(file, lblk, max_blocks, flags, mode);
ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
flags, mode);
if (ret)
goto out;
handle = ext4_journal_start(inode, EXT4_HT_INODE, 2);
if (IS_ERR(handle))
goto out;
inode->i_ctime = ext4_current_time(inode);
if (new_size) {
if (ext4_update_inode_size(inode, new_size) & 0x1)
inode->i_mtime = inode->i_ctime;
} else {
/*
* Mark that we allocate beyond EOF so the subsequent truncate
* can proceed even if the new size is the same as i_size.
*/
if ((offset + len) > i_size_read(inode))
ext4_set_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
if (file->f_flags & O_SYNC && EXT4_SB(inode->i_sb)->s_journal) {
ret = jbd2_complete_transaction(EXT4_SB(inode->i_sb)->s_journal,
EXT4_I(inode)->i_sync_tid);
}
ext4_mark_inode_dirty(handle, inode);
if (file->f_flags & O_SYNC)
ext4_handle_sync(handle);
ext4_journal_stop(handle);
out:
mutex_unlock(&inode->i_mutex);
trace_ext4_fallocate_exit(inode, offset, max_blocks, ret);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册