ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores

ARMv7 allows the debug core logic to be powered down and provides the
DBGPRSR register so that software can power-up and check the status of
the logic.

This patch ensures that the debug logic is powered up on ARMv7 cores
before we attempt to access the extended debug registers.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/kernel/hw_breakpoint.c

@@ -836,9 +836,11 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 /*
  * One-time initialisation.
  */
-static void reset_ctrl_regs(void *unused)
+static void reset_ctrl_regs(void *info)
 {
-	int i;
+	int i, cpu = smp_processor_id();
+	u32 dbg_power;
+	cpumask_t *cpumask = info;
 
 	/*
 	 * v7 debug contains save and restore registers so that debug state
@@ -849,6 +851,17 @@ static void reset_ctrl_regs(void *unused)
 	 * later on.
 	 */
 	if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+		/*
+		 * Ensure sticky power-down is clear (i.e. debug logic is
+		 * powered up).
+		 */
+		asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
+		if ((dbg_power & 0x1) == 0) {
+			pr_warning("CPU %d debug is powered down!\n", cpu);
+			cpumask_or(cpumask, cpumask, cpumask_of(cpu));
+			return;
+		}
+
 		/*
 		 * Unconditionally clear the lock by writing a value
 		 * other than 0xC5ACCE55 to the access register.
@@ -887,6 +900,7 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = {
 static int __init arch_hw_breakpoint_init(void)
 {
 	u32 dscr;
+	cpumask_t cpumask = { CPU_BITS_NONE };
 
 	debug_arch = get_debug_arch();
 
@@ -911,7 +925,13 @@ static int __init arch_hw_breakpoint_init(void)
 	 * Reset the breakpoint resources. We assume that a halting
 	 * debugger will leave the world in a nice state for us.
 	 */
-	on_each_cpu(reset_ctrl_regs, NULL, 1);
+	on_each_cpu(reset_ctrl_regs, &cpumask, 1);
+	if (!cpumask_empty(&cpumask)) {
+		core_num_brps = 0;
+		core_num_reserved_brps = 0;
+		core_num_wrps = 0;
+		return 0;
+	}
 
 	ARM_DBG_READ(c1, 0, dscr);
 	if (dscr & ARM_DSCR_HDBGEN) {