clocksource: convert ARM 32-bit down counting clocksources

Convert SP804, MXC, Nomadik and Orion 32-bit down-counting clocksources
to generic mmio clocksource infrastructure.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Acked-by: NNicolas Pitre <nico@fluxnic.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -1042,6 +1042,7 @@ config PLAT_IOP
 
 config PLAT_ORION
 	bool
+	select CLKSRC_MMIO
 	select HAVE_SCHED_CLOCK
 
 config PLAT_PXA
@@ -1052,6 +1053,7 @@ config PLAT_VERSATILE
 
 config ARM_TIMER_SP804
 	bool
+	select CLKSRC_MMIO
 
 source arch/arm/mm/Kconfig
 

arch/arm/common/timer-sp.c

@@ -32,35 +32,17 @@
 #define TIMER_FREQ_KHZ	(1000)
 #define TIMER_RELOAD	(TIMER_FREQ_KHZ * 1000 / HZ)
 
-static void __iomem *clksrc_base;
-
-static cycle_t sp804_read(struct clocksource *cs)
-{
-	return ~readl(clksrc_base + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_sp804 = {
-	.name		= "timer3",
-	.rating		= 200,
-	.read		= sp804_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
 void __init sp804_clocksource_init(void __iomem *base)
 {
-	struct clocksource *cs = &clocksource_sp804;
-
-	clksrc_base = base;
-
 	/* setup timer 0 as free-running clocksource */
-	writel(0, clksrc_base + TIMER_CTRL);
-	writel(0xffffffff, clksrc_base + TIMER_LOAD);
-	writel(0xffffffff, clksrc_base + TIMER_VALUE);
+	writel(0, base + TIMER_CTRL);
+	writel(0xffffffff, base + TIMER_LOAD);
+	writel(0xffffffff, base + TIMER_VALUE);
 	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		clksrc_base + TIMER_CTRL);
+		base + TIMER_CTRL);
 
-	clocksource_register_khz(cs, TIMER_FREQ_KHZ);
+	clocksource_mmio_init(base + TIMER_VALUE, "timer3",
+		TIMER_FREQ_KHZ * 1000, 200, 32, clocksource_mmio_readl_down);
 }
 
 

arch/arm/plat-mxc/epit.c

@@ -83,26 +83,12 @@ static void epit_irq_acknowledge(void)
 	__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
 }
 
-static cycle_t epit_read(struct clocksource *cs)
-{
-	return 0 - __raw_readl(timer_base + EPITCNR);
-}
-
-static struct clocksource clocksource_epit = {
-	.name		= "epit",
-	.rating		= 200,
-	.read		= epit_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
 static int __init epit_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	clocksource_register_hz(&clocksource_epit, c);
-
-	return 0;
+	return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
+			clocksource_mmio_readl_down);
 }
 
 /* clock event */

arch/arm/plat-nomadik/Kconfig

@@ -5,6 +5,7 @@
 config PLAT_NOMADIK
 	bool
 	depends on ARCH_NOMADIK || ARCH_U8500
+	select CLKSRC_MMIO
 	default y
 	help
 	  Common platform code for Nomadik and other ST-Ericsson

arch/arm/plat-nomadik/timer.c

@@ -25,29 +25,6 @@
 
 void __iomem *mtu_base; /* Assigned by machine code */
 
-/*
- * Kernel assumes that sched_clock can be called early
- * but the MTU may not yet be initialized.
- */
-static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
-{
-	return 0;
-}
-
-/* clocksource: MTU decrements, so we negate the value being read. */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
-{
-	return -readl(mtu_base + MTU_VAL(0));
-}
-
-static struct clocksource nmdk_clksrc = {
-	.name		= "mtu_0",
-	.rating		= 200,
-	.read		= nmdk_read_timer_dummy,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
 /*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
@@ -172,12 +149,10 @@ void __init nmdk_timer_init(void)
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	/* Now the clock source is ready */
-	nmdk_clksrc.read = nmdk_read_timer;
-
-	if (clocksource_register_hz(&nmdk_clksrc, rate))
+	if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
+			rate, 200, 32, clocksource_mmio_readl_down))
 		pr_err("timer: failed to initialize clock source %s\n",
-		       nmdk_clksrc.name);
+		       "mtu_0");
 
 	init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
 

arch/arm/plat-orion/time.c

@@ -80,24 +80,6 @@ static void __init setup_sched_clock(unsigned long tclk)
 	init_sched_clock(&cd, orion_update_sched_clock, 32, tclk);
 }
 
-/*
- * Clocksource handling.
- */
-static cycle_t orion_clksrc_read(struct clocksource *cs)
-{
-	return 0xffffffff - readl(timer_base + TIMER0_VAL_OFF);
-}
-
-static struct clocksource orion_clksrc = {
-	.name		= "orion_clocksource",
-	.rating		= 300,
-	.read		= orion_clksrc_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
-
 /*
  * Clockevent handling.
  */
@@ -247,7 +229,8 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
 	writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
 	u = readl(timer_base + TIMER_CTRL_OFF);
 	writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
-	clocksource_register_hz(&orion_clksrc, tclk);
+	clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource",
+		tclk, 300, 32, clocksource_mmio_readl_down);
 
 	/*
 	 * Setup clockevent timer (interrupt-driven).