Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 bf856fbb 编写于 作者: B Boojin Kim 提交者： Vinod Koul
浏览文件
操作

ARM: EXYNOS4: Use generic DMA PL330 driver 

This patch makes Samsung EXYNOS4 to use DMA PL330 driver
on DMADEVICE. The EXYNOS4 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
上级 c4e16625
隐藏空白更改
内联 并排
Showing with 198 addition and 114 deletion
arch/arm/mach-exynos4/Kconfig
浏览文件 @ bf856fbb
......@@ -11,7 +11,7 @@ if ARCH_EXYNOS4
config CPU_EXYNOS4210
bool
select S3C_PL330_DMA
select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
......
arch/arm/mach-exynos4/clock.c
浏览文件 @ bf856fbb
......@@ -43,6 +43,11 @@ static struct clk clk_sclk_usbphy1 = {
.name = "sclk_usbphy1",
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
......@@ -454,12 +459,12 @@ static struct clk init_clocks_off[] = {
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 10),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.1",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 1),
......@@ -1210,5 +1215,7 @@ void __init exynos4_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
arch/arm/mach-exynos4/dma.c
浏览文件 @ bf856fbb
......@@ -21,151 +21,228 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/s3c-pl330-pdata.h>
#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static struct resource exynos4_pdma0_resource[] = {
[0] = {
.start = EXYNOS4_PA_PDMA0,
.end = EXYNOS4_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA0,
.end = IRQ_PDMA0,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri pdma0_peri[28] = {
{
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MSM_REQ0,
}, {
.peri_id = (u8)DMACH_MSM_REQ2,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART4_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART4_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS4_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS4_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_AC97_MICIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMOUT,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
.peri = {
[0] = DMACH_PCM0_RX,
[1] = DMACH_PCM0_TX,
[2] = DMACH_PCM2_RX,
[3] = DMACH_PCM2_TX,
[4] = DMACH_MSM_REQ0,
[5] = DMACH_MSM_REQ2,
[6] = DMACH_SPI0_RX,
[7] = DMACH_SPI0_TX,
[8] = DMACH_SPI2_RX,
[9] = DMACH_SPI2_TX,
[10] = DMACH_I2S0S_TX,
[11] = DMACH_I2S0_RX,
[12] = DMACH_I2S0_TX,
[13] = DMACH_I2S2_RX,
[14] = DMACH_I2S2_TX,
[15] = DMACH_UART0_RX,
[16] = DMACH_UART0_TX,
[17] = DMACH_UART2_RX,
[18] = DMACH_UART2_TX,
[19] = DMACH_UART4_RX,
[20] = DMACH_UART4_TX,
[21] = DMACH_SLIMBUS0_RX,
[22] = DMACH_SLIMBUS0_TX,
[23] = DMACH_SLIMBUS2_RX,
[24] = DMACH_SLIMBUS2_TX,
[25] = DMACH_SLIMBUS4_RX,
[26] = DMACH_SLIMBUS4_TX,
[27] = DMACH_AC97_MICIN,
[28] = DMACH_AC97_PCMIN,
[29] = DMACH_AC97_PCMOUT,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata exynos4_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri = pdma0_peri,
};
static struct platform_device exynos4_device_pdma0 = {
.name = "s3c-pl330",
.id = 0,
.num_resources = ARRAY_SIZE(exynos4_pdma0_resource),
.resource = exynos4_pdma0_resource,
.dev = {
struct amba_device exynos4_device_pdma0 = {
.dev = {
.init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &exynos4_pdma0_pdata,
},
.res = {
.start = EXYNOS4_PA_PDMA0,
.end = EXYNOS4_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA0, NO_IRQ},
.periphid = 0x00041330,
};
static struct resource exynos4_pdma1_resource[] = {
[0] = {
.start = EXYNOS4_PA_PDMA1,
.end = EXYNOS4_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA1,
.end = IRQ_PDMA1,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri pdma1_peri[25] = {
{
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MSM_REQ1,
}, {
.peri_id = (u8)DMACH_MSM_REQ3,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS5_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS5_TX,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
.peri = {
[0] = DMACH_PCM0_RX,
[1] = DMACH_PCM0_TX,
[2] = DMACH_PCM1_RX,
[3] = DMACH_PCM1_TX,
[4] = DMACH_MSM_REQ1,
[5] = DMACH_MSM_REQ3,
[6] = DMACH_SPI1_RX,
[7] = DMACH_SPI1_TX,
[8] = DMACH_I2S0S_TX,
[9] = DMACH_I2S0_RX,
[10] = DMACH_I2S0_TX,
[11] = DMACH_I2S1_RX,
[12] = DMACH_I2S1_TX,
[13] = DMACH_UART0_RX,
[14] = DMACH_UART0_TX,
[15] = DMACH_UART1_RX,
[16] = DMACH_UART1_TX,
[17] = DMACH_UART3_RX,
[18] = DMACH_UART3_TX,
[19] = DMACH_SLIMBUS1_RX,
[20] = DMACH_SLIMBUS1_TX,
[21] = DMACH_SLIMBUS3_RX,
[22] = DMACH_SLIMBUS3_TX,
[23] = DMACH_SLIMBUS5_RX,
[24] = DMACH_SLIMBUS5_TX,
[25] = DMACH_SLIMBUS0AUX_RX,
[26] = DMACH_SLIMBUS0AUX_TX,
[27] = DMACH_SPDIF,
[28] = DMACH_MAX,
[29] = DMACH_MAX,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata exynos4_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri = pdma1_peri,
};
static struct platform_device exynos4_device_pdma1 = {
.name = "s3c-pl330",
.id = 1,
.num_resources = ARRAY_SIZE(exynos4_pdma1_resource),
.resource = exynos4_pdma1_resource,
.dev = {
struct amba_device exynos4_device_pdma1 = {
.dev = {
.init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &exynos4_pdma1_pdata,
},
};
static struct platform_device *exynos4_dmacs[] __initdata = {
&exynos4_device_pdma0,
&exynos4_device_pdma1,
.res = {
.start = EXYNOS4_PA_PDMA1,
.end = EXYNOS4_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA1, NO_IRQ},
.periphid = 0x00041330,
};
static int __init exynos4_dma_init(void)
{
platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
amba_device_register(&exynos4_device_pdma0, &iomem_resource);
return 0;
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或