mmc: sdio_irq: rework sdio irq handling

Rather than the SDIO support spawning it's own thread for handling card
interrupts, use the generic IRQ infrastructure for this, triggering it
from the host interface's interrupt handling directly.

This avoids a race between the parent thread waiting to receive an
interrupt response from the card, and the slow startup from the sdio
irq thread, which can occur as a result of high system load (eg, while
udev is running.)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-by: NStephen Warren <swarren@nvidia.com>
[Ulf Hansson] Resolved conflict
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NChris Ball <chris@printf.net>

drivers/mmc/core/sdio_irq.c

@@ -90,6 +90,15 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 	return ret;
 }
 
+void sdio_run_irqs(struct mmc_host *host)
+{
+	mmc_claim_host(host);
+	host->sdio_irq_pending = true;
+	process_sdio_pending_irqs(host);
+	mmc_release_host(host);
+}
+EXPORT_SYMBOL_GPL(sdio_run_irqs);
+
 static int sdio_irq_thread(void *_host)
 {
 	struct mmc_host *host = _host;
@@ -189,14 +198,20 @@ static int sdio_card_irq_get(struct mmc_card *card)
 	WARN_ON(!host->claimed);
 
 	if (!host->sdio_irqs++) {
-		atomic_set(&host->sdio_irq_thread_abort, 0);
-		host->sdio_irq_thread =
-			kthread_run(sdio_irq_thread, host, "ksdioirqd/%s",
-				mmc_hostname(host));
-		if (IS_ERR(host->sdio_irq_thread)) {
-			int err = PTR_ERR(host->sdio_irq_thread);
-			host->sdio_irqs--;
-			return err;
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			atomic_set(&host->sdio_irq_thread_abort, 0);
+			host->sdio_irq_thread =
+				kthread_run(sdio_irq_thread, host,
+					    "ksdioirqd/%s", mmc_hostname(host));
+			if (IS_ERR(host->sdio_irq_thread)) {
+				int err = PTR_ERR(host->sdio_irq_thread);
+				host->sdio_irqs--;
+				return err;
+			}
+		} else {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 1);
+			mmc_host_clk_release(host);
 		}
 	}
 
@@ -211,8 +226,14 @@ static int sdio_card_irq_put(struct mmc_card *card)
 	BUG_ON(host->sdio_irqs < 1);
 
 	if (!--host->sdio_irqs) {
-		atomic_set(&host->sdio_irq_thread_abort, 1);
-		kthread_stop(host->sdio_irq_thread);
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			atomic_set(&host->sdio_irq_thread_abort, 1);
+			kthread_stop(host->sdio_irq_thread);
+		} else {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 0);
+			mmc_host_clk_release(host);
+		}
 	}
 
 	return 0;

include/linux/mmc/host.h

@@ -282,6 +282,7 @@ struct mmc_host {
 #define MMC_CAP2_HS400_1_2V	(1 << 16)	/* Can support HS400 1.2V */
 #define MMC_CAP2_HS400		(MMC_CAP2_HS400_1_8V | \
 				 MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -397,6 +398,8 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 	wake_up_process(host->sdio_irq_thread);
 }
 
+void sdio_run_irqs(struct mmc_host *host);
+
 #ifdef CONFIG_REGULATOR
 int mmc_regulator_get_ocrmask(struct regulator *supply);
 int mmc_regulator_set_ocr(struct mmc_host *mmc,