V4L/DVB (13798): [Mantis] Enable power for all cards, use byte mode only on relevant devices

Signed-off-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/mantis/hopper_vp3028.c

@@ -45,17 +45,30 @@ struct zl10353_config hopper_vp3028_config = {
 static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
 {
 	struct i2c_adapter *adapter	= &mantis->adapter;
+	struct mantis_hwconfig *config	= mantis->hwconfig;
 	int err = 0;
 
+	gpio_set_bits(mantis, config->reset, 0);
+	msleep(100);
 	err = mantis_frontend_power(mantis, POWER_ON);
-	mantis_frontend_soft_reset(mantis);
-
-	dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
-	fe = zl10353_attach(&hopper_vp3028_config, adapter);
-
-	if (!fe)
-		return -1;
+	msleep(100);
+	gpio_set_bits(mantis, config->reset, 1);
 
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		msleep(250);
+		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+		fe = zl10353_attach(&hopper_vp3028_config, adapter);
+
+		if (!fe)
+			return -1;
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
 	dprintk(MANTIS_ERROR, 1, "Done!");
 
 	return 0;

drivers/media/dvb/mantis/mantis_common.h

@@ -32,6 +32,7 @@
 #define MANTIS_NOTICE		1
 #define MANTIS_INFO		2
 #define MANTIS_DEBUG		3
+#define MANTIS_TMG		9
 
 #define dprintk(y, z, format, arg...) do {								\
 	if (z) {											\
@@ -43,6 +44,8 @@
 			printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
 		else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y))			\
 			printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
+		else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y))			\
+			printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
 	} else {											\
 		if (mantis->verbose > y)								\
 			printk(format , ##arg);								\
@@ -54,9 +57,6 @@
 
 #define mmwrite(dat, addr)	mwrite((dat), (mantis->mmio + (addr)))
 #define mmread(addr)		mread(mantis->mmio + (addr))
-#define mmand(dat, addr)	mmwrite((dat) & mmread(addr), addr)
-#define mmor(dat, addr)		mmwrite((dat) | mmread(addr), addr)
-#define mmaor(dat, addr)	mmwrite((dat) | ((mask) & mmread(addr)), addr)
 
 #define MANTIS_TS_188		0
 #define MANTIS_TS_204		1
@@ -75,6 +75,11 @@
 		.driver_data	= (unsigned long) (__configptr)		\
 }
 
+enum mantis_i2c_mode {
+	MANTIS_PAGE_MODE = 0,
+	MANTIS_BYTE_MODE,
+};
+
 struct mantis_pci;
 
 struct mantis_hwconfig {
@@ -91,6 +96,8 @@ struct mantis_hwconfig {
 
 	u8			power;
 	u8			reset;
+
+	enum mantis_i2c_mode	i2c_mode;
 };
 
 struct mantis_pci {

drivers/media/dvb/mantis/mantis_i2c.c

@@ -35,6 +35,8 @@
 
 #define I2C_HW_B_MANTIS		0x1c
 
+#define TRIALS			10000
+
 static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
 {
 	u32 rxd, i, stat, trials;
@@ -55,13 +57,25 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
 		mmwrite(rxd, MANTIS_I2CDATA_CTL);
 
 		/* wait for xfer completion */
-		for (trials = 0; trials < 100; trials++) {
-			udelay(500);
+		for (trials = 0; trials < TRIALS; trials++) {
+			msleep(1);
 			stat = mmread(MANTIS_INT_STAT);
 			if (stat & MANTIS_INT_I2CDONE)
 				break;
 		}
 
+		dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+		/* wait for xfer completion */
+		for (trials = 0; trials < TRIALS; trials++) {
+			stat = mmread(MANTIS_INT_STAT);
+			if (stat & MANTIS_INT_I2CRACK)
+				break;
+			msleep(1);
+		}
+
+		dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+
 		rxd = mmread(MANTIS_I2CDATA_CTL);
 		msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
 		dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
@@ -93,12 +107,24 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg
 		mmwrite(txd, MANTIS_I2CDATA_CTL);
 
 		/* wait for xfer completion */
-		for (trials = 0; trials < 100; trials++) {
-			udelay(500);
+		for (trials = 0; trials < TRIALS; trials++) {
+			msleep(1);
 			stat = mmread(MANTIS_INT_STAT);
 			if (stat & MANTIS_INT_I2CDONE)
 				break;
 		}
+
+		dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+		/* wait for xfer completion */
+		for (trials = 0; trials < TRIALS; trials++) {
+			stat = mmread(MANTIS_INT_STAT);
+			if (stat & MANTIS_INT_I2CRACK)
+				break;
+			msleep(1);
+		}
+
+		dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
 	}
 	dprintk(MANTIS_INFO, 0, "]\n");
 
@@ -122,10 +148,11 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in
 
 	while (i < num) {
 		/* Byte MODE */
-		if (((i + 1) < num)		&&
-			(msgs[i].len < 2)	&&
-			(msgs[i + 1].len < 2)	&&
-			(msgs[i + 1].flags & I2C_M_RD)) {
+		if ((config->i2c_mode & MANTIS_BYTE_MODE) &&
+		    ((i + 1) < num)			&&
+		    (msgs[i].len < 2)			&&
+		    (msgs[i + 1].len < 2)		&&
+		    (msgs[i + 1].flags & I2C_M_RD)) {
 
 			dprintk(MANTIS_DEBUG, 0, "        Byte MODE:\n");
 
@@ -136,8 +163,8 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in
 
 			mmwrite(txd, MANTIS_I2CDATA_CTL);
 			/* wait for xfer completion */
-			for (trials = 0; trials < 100; trials++) {
-				udelay(500);
+			for (trials = 0; trials < TRIALS; trials++) {
+				msleep(1);
 				stat = mmread(MANTIS_INT_STAT);
 				if (stat & MANTIS_INT_I2CDONE)
 					break;

drivers/media/dvb/mantis/mantis_vp1033.c

@@ -31,7 +31,10 @@
 
 #include "stv0299.h"
 #include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
 #include "mantis_vp1033.h"
+#include "mantis_reg.h"
 
 u8 lgtdqcs001f_inittab[] = {
 	0x01, 0x15,
@@ -163,19 +166,32 @@ static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 {
 	struct i2c_adapter *adapter	= &mantis->adapter;
 
-	dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
-	fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+	int err = 0;
 
-	if (fe) {
-		fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
-		dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
-			lgtdqcs001f_config.demod_address);
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
 
-		dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
+		dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
+		fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+
+		if (fe) {
+			fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
+			dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
+				lgtdqcs001f_config.demod_address);
+
+			dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
+		} else {
+			return -1;
+		}
 	} else {
-		return -1;
-	}
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
 
+		return -EIO;
+	}
 	mantis->fe = fe;
 	dprintk(MANTIS_ERROR, 1, "Done!");
 
@@ -192,4 +208,6 @@ struct mantis_hwconfig vp1033_config = {
 	.bytes			= 0,
 
 	.frontend_init		= vp1033_frontend_init,
+	.power			= GPIF_A12,
+	.reset			= GPIF_A13,
 };

drivers/media/dvb/mantis/mantis_vp1034.c

@@ -32,6 +32,7 @@
 #include "mb86a16.h"
 #include "mantis_common.h"
 #include "mantis_ioc.h"
+#include "mantis_dvb.h"
 #include "mantis_vp1034.h"
 #include "mantis_reg.h"
 
@@ -74,17 +75,30 @@ static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 {
 	struct i2c_adapter *adapter	= &mantis->adapter;
 
-	dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
-	fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
-	if (fe) {
-		dprintk(MANTIS_ERROR, 1,
-		"found MB86A16 DVB-S/DSS frontend @0x%02x",
-		vp1034_mb86a16_config.demod_address);
+	int err = 0;
 
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+
+		dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+		fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+		if (fe) {
+			dprintk(MANTIS_ERROR, 1,
+			"found MB86A16 DVB-S/DSS frontend @0x%02x",
+			vp1034_mb86a16_config.demod_address);
+
+		} else {
+			return -1;
+		}
 	} else {
-		return -1;
-	}
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
 
+		return -EIO;
+	}
 	mantis->fe = fe;
 	dprintk(MANTIS_ERROR, 1, "Done!");
 
@@ -101,4 +115,6 @@ struct mantis_hwconfig vp1034_config = {
 	.bytes		= 0,
 
 	.frontend_init	= vp1034_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
 };

drivers/media/dvb/mantis/mantis_vp2033.c

@@ -31,6 +31,8 @@
 
 #include "tda1002x.h"
 #include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
 #include "mantis_vp2033.h"
 
 #define MANTIS_MODEL_NAME	"VP-2033"
@@ -123,32 +125,46 @@ static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 {
 	struct i2c_adapter *adapter = &mantis->adapter;
 
-	dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
-	fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
-			     adapter,
-			     read_pwm(mantis));
+	int err = 0;
 
-	if (fe) {
-		dprintk(MANTIS_ERROR, 1,
-			"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
-			vp2033_tda1002x_cu1216_config.demod_address);
-	} else {
-		fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+
+		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+		fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
 				     adapter,
 				     read_pwm(mantis));
 
 		if (fe) {
 			dprintk(MANTIS_ERROR, 1,
-				"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
 				vp2033_tda1002x_cu1216_config.demod_address);
+		} else {
+			fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+					     adapter,
+					     read_pwm(mantis));
+
+			if (fe) {
+				dprintk(MANTIS_ERROR, 1,
+					"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+					vp2033_tda1002x_cu1216_config.demod_address);
+			}
 		}
-	}
 
-	if (fe) {
-		fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
-		dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+		if (fe) {
+			fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+			dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+		} else {
+			return -1;
+		}
 	} else {
-		return -1;
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
 	}
 
 	mantis->fe = fe;
@@ -167,4 +183,6 @@ struct mantis_hwconfig vp2033_config = {
 	.bytes		= 0,
 
 	.frontend_init	= vp2033_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
 };

drivers/media/dvb/mantis/mantis_vp2040.c

@@ -31,6 +31,8 @@
 
 #include "tda1002x.h"
 #include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
 #include "mantis_vp2040.h"
 
 #define MANTIS_MODEL_NAME	"VP-2040"
@@ -123,34 +125,47 @@ static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 {
 	struct i2c_adapter *adapter = &mantis->adapter;
 
-	dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
-	fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
-			     adapter,
-			     read_pwm(mantis));
+	int err = 0;
 
-	if (fe) {
-		dprintk(MANTIS_ERROR, 1,
-			"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
-			vp2040_tda1002x_cu1216_config.demod_address);
-	} else {
-		fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+
+		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+		fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
 				     adapter,
 				     read_pwm(mantis));
 
 		if (fe) {
 			dprintk(MANTIS_ERROR, 1,
-				"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
 				vp2040_tda1002x_cu1216_config.demod_address);
+		} else {
+			fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+					     adapter,
+					     read_pwm(mantis));
+
+			if (fe) {
+				dprintk(MANTIS_ERROR, 1,
+					"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+					vp2040_tda1002x_cu1216_config.demod_address);
+			}
 		}
-	}
 
-	if (fe) {
-		fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
-		dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+		if (fe) {
+			fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+			dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+		} else {
+			return -1;
+		}
 	} else {
-		return -1;
-	}
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
 
+		return -EIO;
+	}
 	mantis->fe = fe;
 	dprintk(MANTIS_DEBUG, 1, "Done!");
 
@@ -167,4 +182,6 @@ struct mantis_hwconfig vp2040_config = {
 	.bytes		= 0,
 
 	.frontend_init	= vp2040_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
 };

drivers/media/dvb/mantis/mantis_vp3030.c

@@ -66,13 +66,23 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	msleep(100);
 	gpio_set_bits(mantis, config->reset, 1);
 
-	dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
-	fe = zl10353_attach(&mantis_vp3030_config, adapter);
+	if (err == 0) {
+		msleep(250);
+		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+		fe = zl10353_attach(&mantis_vp3030_config, adapter);
 
-	if (!fe)
-		return -1;
+		if (!fe)
+			return -1;
 
-	tda665x_attach(fe, &env57h12d5_config, adapter);
+		tda665x_attach(fe, &env57h12d5_config, adapter);
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+
+	}
 	mantis->fe = fe;
 	dprintk(MANTIS_ERROR, 1, "Done!");
 
@@ -91,4 +101,6 @@ struct mantis_hwconfig vp3030_config = {
 	.frontend_init	= vp3030_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
+
+	.i2c_mode	= MANTIS_BYTE_MODE
 };