Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 bc3875f1 编写于 作者: L Lothar Waßmann 提交者： Shawn Guo
浏览文件
操作

ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers 

Convert mx23/mx28 dts filed to use the pinctrl header files.

NOTE: During automatic conversion of these files to use the pinconfig
definitions an inconsistency has been found in:
arch/arm/boot/dts/imx28-apx4devkit.dts

According to the comment the function for pad SSP2_SS0 should have
been MX28_PAD_SSP2_SS0__GPIO_2_19, while the given value 0x2131
represents: MX28_PAD_SSP2_SS0__AUART3_TX

I used the later (though probably wrong) definition because that's
what is actually being used in the DTB.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
上级 ff04b401
展开全部 隐藏空白更改
内联 并排
Showing with 440 addition and 438 deletion
arch/arm/boot/dts/imx23-evk.dts
浏览文件 @ bc3875f1
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
/include/ "imx23.dtsi"
#include "imx23.dtsi"
/ {
model = "Freescale i.MX23 Evaluation Kit";
......@@ -45,10 +45,10 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
MX23_PAD_LCD_RESET__GPIO_1_18
MX23_PAD_PWM3__GPIO_1_29
MX23_PAD_PWM4__GPIO_1_30
MX23_PAD_SSP1_DETECT__SSP1_DETECT
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx23-olinuxino.dts
浏览文件 @ bc3875f1
......@@ -12,7 +12,7 @@
*/
/dts-v1/;
/include/ "imx23.dtsi"
#include "imx23.dtsi"
/ {
model = "i.MX23 Olinuxino Low Cost Board";
......@@ -40,7 +40,7 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
MX23_PAD_GPMI_ALE__GPIO_0_17
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -50,7 +50,7 @@
led_pin_gpio2_1: led_gpio2_1@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
MX23_PAD_SSP1_DETECT__GPIO_2_1
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx23-stmp378x_devb.dts
浏览文件 @ bc3875f1
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
/include/ "imx23.dtsi"
#include "imx23.dtsi"
/ {
model = "Freescale STMP378x Development Board";
......@@ -39,8 +39,8 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
MX23_PAD_PWM3__GPIO_1_29
MX23_PAD_PWM4__GPIO_1_30
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx23.dtsi
浏览文件 @ bc3875f1
......@@ -9,7 +9,8 @@
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
#include "skeleton.dtsi"
#include "imx23-pinfunc.h"
/ {
interrupt-parent = <&icoll>;
......@@ -137,8 +138,8 @@
duart_pins_a: duart@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11a2 /* MX23_PAD_PWM0__DUART_RX */
0x11b2 /* MX23_PAD_PWM1__DUART_TX */
MX23_PAD_PWM0__DUART_RX
MX23_PAD_PWM1__DUART_TX
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -148,10 +149,10 @@
auart0_pins_a: auart0@0 {
reg = <0>;
fsl,pinmux-ids = <
0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
MX23_PAD_AUART1_RX__AUART1_RX
MX23_PAD_AUART1_TX__AUART1_TX
MX23_PAD_AUART1_CTS__AUART1_CTS
MX23_PAD_AUART1_RTS__AUART1_RTS
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -161,8 +162,8 @@
auart0_2pins_a: auart0-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
MX23_PAD_I2C_SCL__AUART1_TX
MX23_PAD_I2C_SDA__AUART1_RX
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -172,23 +173,23 @@
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
MX23_PAD_GPMI_D00__GPMI_D00
MX23_PAD_GPMI_D01__GPMI_D01
MX23_PAD_GPMI_D02__GPMI_D02
MX23_PAD_GPMI_D03__GPMI_D03
MX23_PAD_GPMI_D04__GPMI_D04
MX23_PAD_GPMI_D05__GPMI_D05
MX23_PAD_GPMI_D06__GPMI_D06
MX23_PAD_GPMI_D07__GPMI_D07
MX23_PAD_GPMI_CLE__GPMI_CLE
MX23_PAD_GPMI_ALE__GPMI_ALE
MX23_PAD_GPMI_RDY0__GPMI_RDY0
MX23_PAD_GPMI_RDY1__GPMI_RDY1
MX23_PAD_GPMI_WPN__GPMI_WPN
MX23_PAD_GPMI_WRN__GPMI_WRN
MX23_PAD_GPMI_RDN__GPMI_RDN
MX23_PAD_GPMI_CE1N__GPMI_CE1N
MX23_PAD_GPMI_CE0N__GPMI_CE0N
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -197,9 +198,9 @@
gpmi_pins_fixup: gpmi-pins-fixup {
fsl,pinmux-ids = <
0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
MX23_PAD_GPMI_WPN__GPMI_WPN
MX23_PAD_GPMI_WRN__GPMI_WRN
MX23_PAD_GPMI_RDN__GPMI_RDN
>;
fsl,drive-strength = <2>;
};
......@@ -207,12 +208,12 @@
mmc0_4bit_pins_a: mmc0-4bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
MX23_PAD_SSP1_DATA0__SSP1_DATA0
MX23_PAD_SSP1_DATA1__SSP1_DATA1
MX23_PAD_SSP1_DATA2__SSP1_DATA2
MX23_PAD_SSP1_DATA3__SSP1_DATA3
MX23_PAD_SSP1_CMD__SSP1_CMD
MX23_PAD_SSP1_SCK__SSP1_SCK
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -222,17 +223,17 @@
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
MX23_PAD_SSP1_DATA0__SSP1_DATA0
MX23_PAD_SSP1_DATA1__SSP1_DATA1
MX23_PAD_SSP1_DATA2__SSP1_DATA2
MX23_PAD_SSP1_DATA3__SSP1_DATA3
MX23_PAD_GPMI_D08__SSP1_DATA4
MX23_PAD_GPMI_D09__SSP1_DATA5
MX23_PAD_GPMI_D10__SSP1_DATA6
MX23_PAD_GPMI_D11__SSP1_DATA7
MX23_PAD_SSP1_CMD__SSP1_CMD
MX23_PAD_SSP1_DETECT__SSP1_DETECT
MX23_PAD_SSP1_SCK__SSP1_SCK
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -241,8 +242,8 @@
mmc0_pins_fixup: mmc0-pins-fixup {
fsl,pinmux-ids = <
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
MX23_PAD_SSP1_DETECT__SSP1_DETECT
MX23_PAD_SSP1_SCK__SSP1_SCK
>;
fsl,pull-up = <0>;
};
......@@ -250,7 +251,7 @@
pwm2_pins_a: pwm2@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11c0 /* MX23_PAD_PWM2__PWM2 */
MX23_PAD_PWM2__PWM2
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -260,34 +261,34 @@
lcdif_24bit_pins_a: lcdif-24bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
MX23_PAD_LCD_D00__LCD_D00
MX23_PAD_LCD_D01__LCD_D01
MX23_PAD_LCD_D02__LCD_D02
MX23_PAD_LCD_D03__LCD_D03
MX23_PAD_LCD_D04__LCD_D04
MX23_PAD_LCD_D05__LCD_D05
MX23_PAD_LCD_D06__LCD_D06
MX23_PAD_LCD_D07__LCD_D07
MX23_PAD_LCD_D08__LCD_D08
MX23_PAD_LCD_D09__LCD_D09
MX23_PAD_LCD_D10__LCD_D10
MX23_PAD_LCD_D11__LCD_D11
MX23_PAD_LCD_D12__LCD_D12
MX23_PAD_LCD_D13__LCD_D13
MX23_PAD_LCD_D14__LCD_D14
MX23_PAD_LCD_D15__LCD_D15
MX23_PAD_LCD_D16__LCD_D16
MX23_PAD_LCD_D17__LCD_D17
MX23_PAD_GPMI_D08__LCD_D18
MX23_PAD_GPMI_D09__LCD_D19
MX23_PAD_GPMI_D10__LCD_D20
MX23_PAD_GPMI_D11__LCD_D21
MX23_PAD_GPMI_D12__LCD_D22
MX23_PAD_GPMI_D13__LCD_D23
MX23_PAD_LCD_DOTCK__LCD_DOTCK
MX23_PAD_LCD_ENABLE__LCD_ENABLE
MX23_PAD_LCD_HSYNC__LCD_HSYNC
MX23_PAD_LCD_VSYNC__LCD_VSYNC
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -297,10 +298,10 @@
spi2_pins_a: spi2@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
MX23_PAD_GPMI_WRN__SSP2_SCK
MX23_PAD_GPMI_RDY1__SSP2_CMD
MX23_PAD_GPMI_D00__SSP2_DATA0
MX23_PAD_GPMI_D03__SSP2_DATA3
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-apf28.dts
浏览文件 @ bc3875f1
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
/include/ "imx28.dtsi"
#include "imx28.dtsi"
/ {
model = "Armadeus Systems APF28 module";
......
arch/arm/boot/dts/imx28-apf28dev.dts
浏览文件 @ bc3875f1
......@@ -10,7 +10,7 @@
*/
/* APF28Dev is a docking board for the APF28 SOM */
/include/ "imx28-apf28.dts"
#include "imx28-apf28.dts"
/ {
model = "Armadeus Systems APF28Dev docking/development board";
......@@ -41,13 +41,13 @@
hog_pins_apf28dev: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
MX28_PAD_LCD_D16__GPIO_1_16
MX28_PAD_LCD_D17__GPIO_1_17
MX28_PAD_LCD_D18__GPIO_1_18
MX28_PAD_LCD_D19__GPIO_1_19
MX28_PAD_LCD_D20__GPIO_1_20
MX28_PAD_LCD_D21__GPIO_1_21
MX28_PAD_LCD_D22__GPIO_1_22
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -57,10 +57,10 @@
lcdif_pins_apf28dev: lcdif-apf28dev@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-apx4devkit.dts
浏览文件 @ bc3875f1
/dts-v1/;
/include/ "imx28.dtsi"
#include "imx28.dtsi"
/ {
model = "Bluegiga APX4 Development Kit";
......@@ -40,13 +40,13 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
MX28_PAD_GPMI_CE1N__GPIO_0_17
MX28_PAD_GPMI_RDY1__GPIO_0_21
MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
MX28_PAD_PWM3__GPIO_3_28
MX28_PAD_LCD_RESET__GPIO_3_30
MX28_PAD_JTAG_RTCK__GPIO_4_20
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -56,10 +56,10 @@
lcdif_pins_apx4: lcdif-apx4@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -69,12 +69,12 @@
mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
MX28_PAD_SSP0_DATA4__SSP2_D0
MX28_PAD_SSP0_DATA5__SSP2_D3
MX28_PAD_SSP0_DATA6__SSP2_CMD
MX28_PAD_SSP0_DATA7__SSP2_SCK
MX28_PAD_SSP2_SS1__SSP2_D1
MX28_PAD_SSP2_SS2__SSP2_D2
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -83,7 +83,7 @@
mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
fsl,pinmux-ids = <
0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
MX28_PAD_SSP0_DATA7__SSP2_SCK
>;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
......
arch/arm/boot/dts/imx28-cfa10036.dts
浏览文件 @ bc3875f1
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
/include/ "imx28.dtsi"
#include "imx28.dtsi"
/ {
model = "Crystalfontz CFA-10036 Board";
......@@ -26,7 +26,7 @@
ssd1306_cfa10036: ssd1306-10036@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
MX28_PAD_SSP0_DATA7__GPIO_2_7
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -36,7 +36,7 @@
led_pins_cfa10036: leds-10036@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
MX28_PAD_AUART1_RX__GPIO_3_4
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -46,7 +46,7 @@
usb0_otg_cfa10036: otg-10036@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
MX28_PAD_GPMI_RDY0__USB0_ID
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-cfa10037.dts
浏览文件 @ bc3875f1
......@@ -13,7 +13,7 @@
* The CFA-10049 is an expansion board for the CFA-10036 module, thus we
* need to include the CFA-10036 DTS.
*/
/include/ "imx28-cfa10036.dts"
#include "imx28-cfa10036.dts"
/ {
model = "Crystalfontz CFA-10037 Board";
......@@ -25,7 +25,7 @@
usb_pins_cfa10037: usb-10037@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
MX28_PAD_GPMI_D07__GPIO_0_7
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -35,7 +35,7 @@
mac0_pins_cfa10037: mac0-10037@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
MX28_PAD_SSP2_SS2__GPIO_2_21
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-cfa10049.dts
浏览文件 @ bc3875f1
......@@ -13,7 +13,7 @@
* The CFA-10049 is an expansion board for the CFA-10036 module, thus we
* need to include the CFA-10036 DTS.
*/
/include/ "imx28-cfa10036.dts"
#include "imx28-cfa10036.dts"
/ {
model = "Crystalfontz CFA-10049 Board";
......@@ -25,7 +25,7 @@
usb_pins_cfa10049: usb-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
MX28_PAD_GPMI_D07__GPIO_0_7
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -35,8 +35,8 @@
i2cmux_pins_cfa10049: i2cmux-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
MX28_PAD_LCD_D22__GPIO_1_22
MX28_PAD_LCD_D23__GPIO_1_23
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -46,7 +46,7 @@
mac0_pins_cfa10049: mac0-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
MX28_PAD_SSP2_SS2__GPIO_2_21
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -56,7 +56,7 @@
pca_pins_cfa10049: pca-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
MX28_PAD_SSP2_SS0__GPIO_2_19
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -66,8 +66,8 @@
rotary_pins_cfa10049: rotary-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
MX28_PAD_I2C0_SCL__GPIO_3_24
MX28_PAD_I2C0_SDA__GPIO_3_25
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -77,7 +77,7 @@
rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
MX28_PAD_SAIF1_SDATA0__GPIO_3_26
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -87,10 +87,10 @@
spi2_pins_cfa10049: spi2-cfa10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
MX28_PAD_SSP2_SCK__GPIO_2_16
MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -100,11 +100,11 @@
spi3_pins_cfa10049: spi3-cfa10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
MX28_PAD_GPMI_RDN__GPIO_0_24
MX28_PAD_GPMI_RESETN__GPIO_0_28
MX28_PAD_GPMI_CE1N__GPIO_0_17
MX28_PAD_GPMI_ALE__GPIO_0_26
MX28_PAD_GPMI_CLE__GPIO_0_27
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -114,24 +114,24 @@
lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
MX28_PAD_LCD_D00__LCD_D0
MX28_PAD_LCD_D01__LCD_D1
MX28_PAD_LCD_D02__LCD_D2
MX28_PAD_LCD_D03__LCD_D3
MX28_PAD_LCD_D04__LCD_D4
MX28_PAD_LCD_D05__LCD_D5
MX28_PAD_LCD_D06__LCD_D6
MX28_PAD_LCD_D07__LCD_D7
MX28_PAD_LCD_D08__LCD_D8
MX28_PAD_LCD_D09__LCD_D9
MX28_PAD_LCD_D10__LCD_D10
MX28_PAD_LCD_D11__LCD_D11
MX28_PAD_LCD_D12__LCD_D12
MX28_PAD_LCD_D13__LCD_D13
MX28_PAD_LCD_D14__LCD_D14
MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -141,10 +141,10 @@
lcdif_pins_cfa10049: lcdif-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -154,7 +154,7 @@
lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
MX28_PAD_LCD_RESET__GPIO_3_30
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -164,7 +164,7 @@
w1_gpio_pins: w1-gpio@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
MX28_PAD_LCD_D21__GPIO_1_21
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-cfa10055.dts
浏览文件 @ bc3875f1
......@@ -14,7 +14,7 @@
* The CFA-10055 is an expansion board for the CFA-10036 module and
* CFA-10037, thus we need to include the CFA-10037 DTS.
*/
/include/ "imx28-cfa10037.dts"
#include "imx28-cfa10037.dts"
/ {
model = "Crystalfontz CFA-10055 Board";
......@@ -26,10 +26,10 @@
spi2_pins_cfa10055: spi2-cfa10055@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
MX28_PAD_SSP2_SCK__GPIO_2_16
MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -39,24 +39,24 @@
lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
MX28_PAD_LCD_D00__LCD_D0
MX28_PAD_LCD_D01__LCD_D1
MX28_PAD_LCD_D02__LCD_D2
MX28_PAD_LCD_D03__LCD_D3
MX28_PAD_LCD_D04__LCD_D4
MX28_PAD_LCD_D05__LCD_D5
MX28_PAD_LCD_D06__LCD_D6
MX28_PAD_LCD_D07__LCD_D7
MX28_PAD_LCD_D08__LCD_D8
MX28_PAD_LCD_D09__LCD_D9
MX28_PAD_LCD_D10__LCD_D10
MX28_PAD_LCD_D11__LCD_D11
MX28_PAD_LCD_D12__LCD_D12
MX28_PAD_LCD_D13__LCD_D13
MX28_PAD_LCD_D14__LCD_D14
MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -66,10 +66,10 @@
lcdif_pins_cfa10055: lcdif-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -79,7 +79,7 @@
lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
MX28_PAD_LCD_RESET__GPIO_3_30
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-cfa10056.dts
浏览文件 @ bc3875f1
......@@ -13,7 +13,7 @@
* The CFA-10055 is an expansion board for the CFA-10036 module and
* CFA-10037, thus we need to include the CFA-10037 DTS.
*/
/include/ "imx28-cfa10037.dts"
#include "imx28-cfa10037.dts"
/ {
model = "Crystalfontz CFA-10056 Board";
......@@ -25,10 +25,10 @@
spi2_pins_cfa10056: spi2-cfa10056@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
MX28_PAD_SSP2_SCK__GPIO_2_16
MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -38,10 +38,10 @@
lcdif_pins_cfa10056: lcdif-10056@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -51,7 +51,7 @@
lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
MX28_PAD_LCD_RESET__GPIO_3_30
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-cfa10057.dts
浏览文件 @ bc3875f1
......@@ -14,7 +14,7 @@
* The CFA-10057 is an expansion board for the CFA-10036 module, thus we
* need to include the CFA-10036 DTS.
*/
/include/ "imx28-cfa10036.dts"
#include "imx28-cfa10036.dts"
/ {
model = "Crystalfontz CFA-10057 Board";
......@@ -26,7 +26,7 @@
usb_pins_cfa10057: usb-10057@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
MX28_PAD_GPMI_D07__GPIO_0_7
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -36,24 +36,24 @@
lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
MX28_PAD_LCD_D00__LCD_D0
MX28_PAD_LCD_D01__LCD_D1
MX28_PAD_LCD_D02__LCD_D2
MX28_PAD_LCD_D03__LCD_D3
MX28_PAD_LCD_D04__LCD_D4
MX28_PAD_LCD_D05__LCD_D5
MX28_PAD_LCD_D06__LCD_D6
MX28_PAD_LCD_D07__LCD_D7
MX28_PAD_LCD_D08__LCD_D8
MX28_PAD_LCD_D09__LCD_D9
MX28_PAD_LCD_D10__LCD_D10
MX28_PAD_LCD_D11__LCD_D11
MX28_PAD_LCD_D12__LCD_D12
MX28_PAD_LCD_D13__LCD_D13
MX28_PAD_LCD_D14__LCD_D14
MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -63,10 +63,10 @@
lcdif_pins_cfa10057: lcdif-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-cfa10058.dts
浏览文件 @ bc3875f1
......@@ -14,7 +14,7 @@
* The CFA-10058 is an expansion board for the CFA-10036 module, thus we
* need to include the CFA-10036 DTS.
*/
/include/ "imx28-cfa10036.dts"
#include "imx28-cfa10036.dts"
/ {
model = "Crystalfontz CFA-10058 Board";
......@@ -26,7 +26,7 @@
usb_pins_cfa10058: usb-10058@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
MX28_PAD_GPMI_D07__GPIO_0_7
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -36,10 +36,10 @@
lcdif_pins_cfa10058: lcdif-10058@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-evk.dts
浏览文件 @ bc3875f1
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
/include/ "imx28.dtsi"
#include "imx28.dtsi"
/ {
model = "Freescale i.MX28 Evaluation Kit";
......@@ -70,14 +70,14 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
MX28_PAD_SSP1_CMD__GPIO_2_13
MX28_PAD_SSP1_DATA3__GPIO_2_15
MX28_PAD_ENET0_RX_CLK__GPIO_4_13
MX28_PAD_SSP1_SCK__GPIO_2_12
MX28_PAD_PWM3__GPIO_3_28
MX28_PAD_LCD_RESET__GPIO_3_30
MX28_PAD_AUART2_RX__GPIO_3_8
MX28_PAD_AUART2_TX__GPIO_3_9
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -87,7 +87,7 @@
led_pin_gpio3_5: led_gpio3_5@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
MX28_PAD_AUART1_TX__GPIO_3_5
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -97,8 +97,8 @@
gpmi_pins_evk: gpmi-nand-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
MX28_PAD_GPMI_CE1N__GPMI_CE1N
MX28_PAD_GPMI_RDY1__GPMI_READY1
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -108,10 +108,10 @@
lcdif_pins_evk: lcdif-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
MX28_PAD_LCD_RD_E__LCD_VSYNC
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-m28evk.dts
浏览文件 @ bc3875f1
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
/include/ "imx28.dtsi"
#include "imx28.dtsi"
/ {
model = "DENX M28EVK";
......@@ -92,11 +92,11 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
MX28_PAD_PWM3__GPIO_3_28
MX28_PAD_AUART2_CTS__GPIO_3_10
MX28_PAD_AUART2_RTS__GPIO_3_11
MX28_PAD_AUART3_RX__GPIO_3_12
MX28_PAD_AUART3_TX__GPIO_3_13
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -106,8 +106,8 @@
lcdif_pins_m28: lcdif-m28@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
MX28_PAD_LCD_ENABLE__LCD_ENABLE
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-sps1.dts
浏览文件 @ bc3875f1
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
/include/ "imx28.dtsi"
#include "imx28.dtsi"
/ {
model = "SchulerControl GmbH, SC SPS 1";
......@@ -29,9 +29,9 @@
hog_pins_a: hog-gpios@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
MX28_PAD_GPMI_D00__GPIO_0_0
MX28_PAD_GPMI_D03__GPIO_0_3
MX28_PAD_GPMI_D06__GPIO_0_6
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......
arch/arm/boot/dts/imx28-tx28.dts
浏览文件 @ bc3875f1
/dts-v1/;
/include/ "imx28.dtsi"
#include "imx28.dtsi"
/ {
model = "Ka-Ro electronics TX28 module";
......
arch/arm/boot/dts/imx28.dtsi
浏览文件 @ bc3875f1
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或