提交 bbeba4c3 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev:
  [PATCH] fix bogus argument of blkdev_put() in pktcdvd
  [PATCH 2/2] documnt FMODE_ constants
  [PATCH 1/2] kill FMODE_NDELAY_NOW
  [PATCH] clean up blkdev_get a little bit
  [PATCH] Fix block dev compat ioctl handling
  [PATCH] kill obsolete temporary comment in swsusp_close()
......@@ -677,6 +677,29 @@ static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
case DVD_WRITE_STRUCT:
case DVD_AUTH:
arg = (unsigned long)compat_ptr(arg);
/* These intepret arg as an unsigned long, not as a pointer,
* so we must not do compat_ptr() conversion. */
case HDIO_SET_MULTCOUNT:
case HDIO_SET_UNMASKINTR:
case HDIO_SET_KEEPSETTINGS:
case HDIO_SET_32BIT:
case HDIO_SET_NOWERR:
case HDIO_SET_DMA:
case HDIO_SET_PIO_MODE:
case HDIO_SET_NICE:
case HDIO_SET_WCACHE:
case HDIO_SET_ACOUSTIC:
case HDIO_SET_BUSSTATE:
case HDIO_SET_ADDRESS:
case CDROMEJECT_SW:
case CDROM_SET_OPTIONS:
case CDROM_CLEAR_OPTIONS:
case CDROM_SELECT_SPEED:
case CDROM_SELECT_DISC:
case CDROM_MEDIA_CHANGED:
case CDROM_DRIVE_STATUS:
case CDROM_LOCKDOOR:
case CDROM_DEBUG:
break;
default:
/* unknown ioctl number */
......@@ -699,8 +722,14 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
struct backing_dev_info *bdi;
loff_t size;
/*
* O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
* to updated it before every ioctl.
*/
if (file->f_flags & O_NDELAY)
mode |= FMODE_NDELAY_NOW;
mode |= FMODE_NDELAY;
else
mode &= ~FMODE_NDELAY;
switch (cmd) {
case HDIO_GETGEO:
......
......@@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
return 0;
out_mem:
blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
return ret;
......@@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev)
pkt_debugfs_dev_remove(pd);
pkt_sysfs_dev_remove(pd);
blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY);
remove_proc_entry(pd->name, pkt_proc);
DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
......
......@@ -757,7 +757,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
* access to the device is prohibited.
*/
error = scsi_nonblockable_ioctl(sdp, cmd, p,
(mode & FMODE_NDELAY_NOW) != 0);
(mode & FMODE_NDELAY) != 0);
if (!scsi_block_when_processing_errors(sdp) || !error)
return error;
......
......@@ -521,7 +521,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
* if it doesn't recognise the ioctl
*/
ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
(mode & FMODE_NDELAY_NOW) != 0);
(mode & FMODE_NDELAY) != 0);
if (ret != -ENODEV)
return ret;
return scsi_ioctl(sdev, cmd, argp);
......
......@@ -1135,12 +1135,15 @@ static int blkdev_open(struct inode * inode, struct file * filp)
if (res)
return res;
if (!(filp->f_mode & FMODE_EXCL))
return 0;
if (filp->f_mode & FMODE_EXCL) {
res = bd_claim(bdev, filp);
if (res)
goto out_blkdev_put;
}
if (!(res = bd_claim(bdev, filp)))
return 0;
return 0;
out_blkdev_put:
blkdev_put(bdev, filp->f_mode);
return res;
}
......@@ -1203,8 +1206,16 @@ static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
struct block_device *bdev = I_BDEV(file->f_mapping->host);
fmode_t mode = file->f_mode;
/*
* O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
* to updated it before every ioctl.
*/
if (file->f_flags & O_NDELAY)
mode |= FMODE_NDELAY_NOW;
mode |= FMODE_NDELAY;
else
mode &= ~FMODE_NDELAY;
return blkdev_ioctl(bdev, mode, cmd, arg);
}
......
......@@ -63,23 +63,24 @@ extern int dir_notify_enable;
#define MAY_ACCESS 16
#define MAY_OPEN 32
#define FMODE_READ ((__force fmode_t)1)
#define FMODE_WRITE ((__force fmode_t)2)
/* Internal kernel extensions */
#define FMODE_LSEEK ((__force fmode_t)4)
#define FMODE_PREAD ((__force fmode_t)8)
#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
/* File is being opened for execution. Primary users of this flag are
distributed filesystems that can use it to achieve correct ETXTBUSY
behavior for cross-node execution/opening_for_writing of files */
#define FMODE_EXEC ((__force fmode_t)16)
#define FMODE_NDELAY ((__force fmode_t)32)
#define FMODE_EXCL ((__force fmode_t)64)
/* file is open for reading */
#define FMODE_READ ((__force fmode_t)1)
/* file is open for writing */
#define FMODE_WRITE ((__force fmode_t)2)
/* file is seekable */
#define FMODE_LSEEK ((__force fmode_t)4)
/* file can be accessed using pread/pwrite */
#define FMODE_PREAD ((__force fmode_t)8)
#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
/* File is opened for execution with sys_execve / sys_uselib */
#define FMODE_EXEC ((__force fmode_t)16)
/* File is opened with O_NDELAY (only set for block devices) */
#define FMODE_NDELAY ((__force fmode_t)32)
/* File is opened with O_EXCL (only set for block devices) */
#define FMODE_EXCL ((__force fmode_t)64)
/* File is opened using open(.., 3, ..) and is writeable only for ioctls
(specialy hack for floppy.c) */
#define FMODE_WRITE_IOCTL ((__force fmode_t)128)
#define FMODE_NDELAY_NOW ((__force fmode_t)256)
#define RW_MASK 1
#define RWA_MASK 2
......
......@@ -633,7 +633,7 @@ void swsusp_close(fmode_t mode)
return;
}
blkdev_put(resume_bdev, mode); /* move up */
blkdev_put(resume_bdev, mode);
}
static int swsusp_header_init(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册