Merge drm-next into drm-intel-next-queued (this time for real)

To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

.gitignore

@@ -65,6 +65,11 @@ modules.builtin
 #
 /debian/
 
+#
+# Snap directory (make snap-pkg)
+#
+/snap/
+
 #
 # tar directory (make tar*-pkg)
 #

Documentation/00-INDEX

@@ -228,8 +228,6 @@ isdn/
 	- directory with info on the Linux ISDN support, and supported cards.
 kbuild/
 	- directory with info about the kernel build process.
-kernel-doc-nano-HOWTO.txt
-	- outdated info about kernel-doc documentation.
 kdump/
 	- directory with mini HowTo on getting the crash dump code to work.
 doc-guide/
@@ -346,8 +344,6 @@ prctl/
 	- directory with info on the priveledge control subsystem
 preempt-locking.txt
 	- info on locking under a preemptive kernel.
-printk-formats.txt
-	- how to get printk format specifiers right
 process/
 	- how to work with the mainline kernel development process.
 pps/

Documentation/ABI/stable/sysfs-bus-vmbus

@@ -42,72 +42,93 @@ Contact:	K. Y. Srinivasan <kys@microsoft.com>
 Description:	The 16 bit vendor ID of the device
 Users:		tools/hv/lsvmbus and user level RDMA libraries
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Directory for per-channel information
+		NN is the VMBUS relid associtated with the channel.
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/cpu
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	VCPU (sub)channel is affinitized to
-Users:		tools/hv/lsvmbus and other debuggig tools
+Users:		tools/hv/lsvmbus and other debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/cpu
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	VCPU (sub)channel is affinitized to
-Users:		tools/hv/lsvmbus and other debuggig tools
+Users:		tools/hv/lsvmbus and other debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/in_mask
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Inbound channel signaling state
+Description:	Host to guest channel interrupt mask
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/latency
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/latency
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	Channel signaling latency
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/out_mask
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Outbound channel signaling state
+Description:	Guest to host channel interrupt mask
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/pending
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/pending
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	Channel interrupt pending state
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/read_avail
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Bytes availabble to read
+Description:	Bytes available to read
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/write_avail
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Bytes availabble to write
+Description:	Bytes available to write
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/events
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/events
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	Number of times we have signaled the host
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/interrupts
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	Number of times we have taken an interrupt (incoming)
 Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/subchannel_id
+Date:		January. 2018
+KernelVersion:	4.16
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Subchannel ID associated with VMBUS channel
+Users:		Debugging tools and userspace drivers
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/monitor_id
+Date:		January. 2018
+KernelVersion:	4.16
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Monitor bit associated with channel
+Users:		Debugging tools and userspace drivers

Documentation/ABI/testing/devlink-resource-mlxsw

+What: 		/kvd/
+Date:		08-Jan-2018
+KernelVersion:	v4.16
+Contact:	mlxsw@mellanox.com
+Description:	The main database in the Spectrum device is a centralized
+		KVD database used for many of the tables used to configure
+		the chip including L2 FDB, L3 LPM, ECMP and more. The KVD
+		is divided into two sections, the first is hash-based table
+		and the second is a linear access table. The division
+		between the linear and hash-based sections is static and
+		require reload before the changes take effect.
+
+What: 		/kvd/linear
+Date:		08-Jan-2018
+KernelVersion:	v4.16
+Contact:	mlxsw@mellanox.com
+Description:	The linear section of the KVD is managed by software as a
+		flat memory accessed using an index.
+
+What: 		/kvd/hash_single
+Date:		08-Jan-2018
+KernelVersion:	v4.16
+Contact:	mlxsw@mellanox.com
+Description:	The hash based section of the KVD is managed by the switch
+		device. Used in case the key size is smaller or equal to
+		64bit.
+
+What: 		/kvd/hash_double
+Date:		08-Jan-2018
+KernelVersion:	v4.16
+Contact:	mlxsw@mellanox.com
+Description:	The hash based section of the KVD is managed by the switch
+		device. Used in case the key is larger than 64 bit.

Documentation/ABI/testing/evm

@@ -14,30 +14,46 @@ Description:
 		generated either locally or remotely using an
 		asymmetric key. These keys are loaded onto root's
 		keyring using keyctl, and EVM is then enabled by
-		echoing a value to <securityfs>/evm:
+		echoing a value to <securityfs>/evm made up of the
+		following bits:
 
-		1: enable HMAC validation and creation
-		2: enable digital signature validation
-		3: enable HMAC and digital signature validation and HMAC
-		   creation
+		Bit	  Effect
+		0	  Enable HMAC validation and creation
+		1	  Enable digital signature validation
+		2	  Permit modification of EVM-protected metadata at
+			  runtime. Not supported if HMAC validation and
+			  creation is enabled.
+		31	  Disable further runtime modification of EVM policy
 
-		Further writes will be blocked if HMAC support is enabled or
-		if bit 32 is set:
+		For example:
 
-		echo 0x80000002 ><securityfs>/evm
+		echo 1 ><securityfs>/evm
 
-		will enable digital signature validation and block
-		further writes to <securityfs>/evm.
+		will enable HMAC validation and creation
 
-		Until this is done, EVM can not create or validate the
-		'security.evm' xattr, but returns INTEGRITY_UNKNOWN.
-		Loading keys and signaling EVM should be done as early
-		as possible.  Normally this is done in the initramfs,
-		which has already been measured as part of the trusted
-		boot.  For more information on creating and loading
-		existing trusted/encrypted keys, refer to:
+		echo 0x80000003 ><securityfs>/evm
 
-		Documentation/security/keys/trusted-encrypted.rst. Both dracut
-		(via 97masterkey and 98integrity) and systemd (via
+		will enable HMAC and digital signature validation and
+		HMAC creation and disable all further modification of policy.
+
+		echo 0x80000006 ><securityfs>/evm
+
+		will enable digital signature validation, permit
+		modification of EVM-protected metadata and
+		disable all further modification of policy
+
+		Note that once a key has been loaded, it will no longer be
+		possible to enable metadata modification.
+
+		Until key loading has been signaled EVM can not create
+		or validate the 'security.evm' xattr, but returns
+		INTEGRITY_UNKNOWN.  Loading keys and signaling EVM
+		should be done as early as possible.  Normally this is
+		done in the initramfs, which has already been measured
+		as part of the trusted boot.  For more information on
+		creating and loading existing trusted/encrypted keys,
+		refer to:
+		Documentation/security/keys/trusted-encrypted.rst. Both
+		dracut (via 97masterkey and 98integrity) and systemd (via
 		core/ima-setup) have support for loading keys at boot
 		time.

Documentation/ABI/testing/ima_policy

@@ -17,7 +17,8 @@ Description:
 
 		rule format: action [condition ...]
 
-		action: measure | dont_measure | appraise | dont_appraise | audit
+		action: measure | dont_measure | appraise | dont_appraise |
+			audit | hash | dont_hash
 		condition:= base | lsm  [option]
 			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
 				[euid=] [fowner=]]

Documentation/ABI/testing/rtc-cdev

+What:		/dev/rtcX
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		The ioctl interface to drivers for real-time clocks (RTCs).
+		Following actions are supported:
+
+		* RTC_RD_TIME, RTC_SET_TIME: Read or set the RTC time. Time
+		  format is a Gregorian calendar date and 24 hour wall clock
+		  time.
+
+		* RTC_AIE_ON, RTC_AIE_OFF: Enable or disable the alarm interrupt
+		  for RTCs that support alarms
+
+		* RTC_ALM_READ, RTC_ALM_SET: Read or set the alarm time for
+		  RTCs that support alarms. Can be set upto 24 hours in the
+		  future. Requires a separate RTC_AIE_ON call to enable the
+		  alarm interrupt. (Prefer to use RTC_WKALM_*)
+
+		* RTC_WKALM_RD, RTC_WKALM_SET: For RTCs that support a more
+		  powerful interface, which can issue alarms beyond 24 hours and
+		  enable IRQs in the same request.
+
+		* RTC_PIE_ON, RTC_PIE_OFF: Enable or disable the periodic
+		  interrupt for RTCs that support periodic interrupts.
+
+		* RTC_UIE_ON, RTC_UIE_OFF: Enable or disable the update
+		  interrupt for RTCs that support it.
+
+		* RTC_IRQP_READ, RTC_IRQP_SET: Read or set the frequency for
+		  periodic interrupts for RTCs that support periodic interrupts.
+		  Requires a separate RTC_PIE_ON call to enable the periodic
+		  interrupts.
+
+		The ioctl() calls supported by the older /dev/rtc interface are
+		also supported by the newer RTC class framework. However,
+		because the chips and systems are not standardized, some PC/AT
+		functionality might not be provided. And in the same way, some
+		newer features -- including those enabled by ACPI -- are exposed
+		by the RTC class framework, but can't be supported by the older
+		driver.

Documentation/ABI/testing/sysfs-bus-iio

@@ -32,7 +32,7 @@ Description:
 		Description of the physical chip / device for device X.
 		Typically a part number.
 
-What:		/sys/bus/iio/devices/iio:deviceX/timestamp_clock
+What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
 KernelVersion:	4.5
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1290,7 +1290,7 @@ KernelVersion:	3.4
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Unit-less light intensity. Modifiers both and ir indicate
-		that measurements contains visible and infrared light
+		that measurements contain visible and infrared light
 		components or just infrared light, respectively. Modifier uv indicates
 		that measurements contain ultraviolet light components.
 
@@ -1413,6 +1413,16 @@ Description:
 		the available samples after the timeout expires and thus have a
 		maximum delay guarantee.
 
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
+KernelVersion: 4.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A read-only value indicating the bytes of data available in the
+		buffer. In the case of an output buffer, this indicates the
+		amount of empty space available to write data to. In the case of
+		an input buffer, this indicates the amount of data available for
+		reading.
+
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled
 KernelVersion: 4.2
 Contact:	linux-iio@vger.kernel.org

Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32

+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_spi_clk_freq
+KernelVersion:	4.14
+Contact:	arnaud.pouliquen@st.com
+Description:
+		For audio purpose only.
+		Used by audio driver to set/get the spi input frequency.
+		This is mandatory if DFSDM is slave on SPI bus, to
+		provide information on the SPI clock frequency during runtime
+		Notice that the SPI frequency should be a multiple of sample
+		frequency to ensure the precision.
+		if DFSDM input is SPI master
+			Reading  SPI clkout frequency,
+			error on writing
+		If DFSDM input is SPI Slave:
+			Reading returns value previously set.
+			Writing value before starting conversions.
\ No newline at end of file

Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd

+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc
+Date:		June 2017
+Contact:	Lu Baolu <baolu.lu@linux.intel.com>
+Description:
+		xHCI compatible USB host controllers (i.e. super-speed
+		USB3 controllers) are often implemented with the Debug
+		Capability (DbC). It can present a debug device which
+		is fully compliant with the USB framework and provides
+		the equivalent of a very high performance full-duplex
+		serial link for debug purpose.
+
+		The DbC debug device shares a root port with xHCI host.
+		When the DbC is enabled, the root port will be assigned
+		to the Debug Capability. Otherwise, it will be assigned
+		to xHCI.
+
+		Writing "enable" to this attribute will enable the DbC
+		functionality and the shared root port will be assigned
+		to the DbC device. Writing "disable" to this attribute
+		will disable the DbC functionality and the shared root
+		port will roll back to the xHCI.
+
+		Reading this attribute gives the state of the DbC. It
+		can be one of the following states: disabled, enabled,
+		initialized, connected, configured and stalled.

Documentation/ABI/testing/sysfs-bus-siox

+What:		/sys/bus/siox/devices/siox-X/active
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		On reading represents the current state of the bus. If it
+		contains a "0" the bus is stopped and connected devices are
+		expected to not do anything because their watchdog triggered.
+		When the file contains a "1" the bus is operated and periodically
+		does a push-pull cycle to write and read data from the
+		connected devices.
+		When writing a "0" or "1" the bus moves to the described state.
+
+What:		/sys/bus/siox/devices/siox-X/device_add
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Write-only file. Write
+
+			<type> <inbytes> <outbytes> <statustype>
+
+		to add a new device dynamically. <type> is the name that is used to match
+		to a driver (similar to the platform bus). <inbytes> and <outbytes> define
+		the length of the input and output shift register in bytes respectively.
+		<statustype> defines the 4 bit device type that is check to identify connection
+		problems.
+		The new device is added to the end of the existing chain.
+
+What:		/sys/bus/siox/devices/siox-X/device_remove
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Write-only file. A single write removes the last device in the siox chain.
+
+What:		/sys/bus/siox/devices/siox-X/poll_interval_ns
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Defines the interval between two poll cycles in nano seconds.
+		Note this is rounded to jiffies on writing. On reading the current value
+		is returned.
+
+What:		/sys/bus/siox/devices/siox-X-Y/connected
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e.
+		communication with it is not ensured. "1" signals a working connection.
+
+What:		/sys/bus/siox/devices/siox-X-Y/inbytes
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the inbytes value provided to siox-X/device_add
+
+What:		/sys/bus/siox/devices/siox-X-Y/status_errors
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Counts the number of time intervals when the read status byte doesn't yield the
+		expected value.
+
+What:		/sys/bus/siox/devices/siox-X-Y/type
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the type value provided to siox-X/device_add.
+
+What:		/sys/bus/siox/devices/siox-X-Y/watchdog
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting if the watchdog of the siox device is
+		active. "0" means the watchdog is not active and the device is expected to
+		be operational. "1" means the watchdog keeps the device in reset.
+
+What:		/sys/bus/siox/devices/siox-X-Y/watchdog_errors
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the number to time intervals when the
+		watchdog was active.
+
+What:		/sys/bus/siox/devices/siox-X-Y/outbytes
+KernelVersion:	4.16
+Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the outbytes value provided to siox-X/device_add.

Documentation/ABI/testing/sysfs-class-led-trigger-netdev

+What:		/sys/class/leds/<led>/device_name
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies the network device name to monitor.
+
+What:		/sys/class/leds/<led>/interval
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies the duration of the LED blink in milliseconds.
+		Defaults to 50 ms.
+
+What:		/sys/class/leds/<led>/link
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link state of the named network device.
+		If set to 0 (default), the LED's normal state is off.
+		If set to 1, the LED's normal state reflects the link state
+		of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/tx
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal transmission of data on the named network device.
+		If set to 0 (default), the LED will not blink on transmission.
+		If set to 1, the LED will blink for the milliseconds specified
+		in interval to signal transmission.
+
+What:		/sys/class/leds/<led>/rx
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal reception of data on the named network device.
+		If set to 0 (default), the LED will not blink on reception.
+		If set to 1, the LED will blink for the milliseconds specified
+		in interval to signal reception.

Documentation/ABI/testing/sysfs-class-net

@@ -259,3 +259,27 @@ Contact:	netdev@vger.kernel.org
 Description:
 		Symbolic link to the PHY device this network device is attached
 		to.
+
+What:		/sys/class/net/<iface>/carrier_changes
+Date:		Mar 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit unsigned integer counting the number of times the link has
+		seen a change from UP to DOWN and vice versa
+
+What:		/sys/class/net/<iface>/carrier_up_count
+Date:		Jan 2018
+KernelVersion:	4.16
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit unsigned integer counting the number of times the link has
+		been up
+
+What:		/sys/class/net/<iface>/carrier_down_count
+Date:		Jan 2018
+KernelVersion:	4.16
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit unsigned integer counting the number of times the link has
+		been down

Documentation/ABI/testing/sysfs-class-ocxl

+What:		/sys/class/ocxl/<afu name>/afu_version
+Date:		January 2018
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Version of the AFU, in the format <major>:<minor>
+		Reflects what is read in the configuration space of the AFU
+
+What:		/sys/class/ocxl/<afu name>/contexts
+Date:		January 2018
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Number of contexts for the AFU, in the format <n>/<max>
+		where:
+			n:	number of currently active contexts, for debug
+			max:	maximum number of contexts supported by the AFU
+
+What:		/sys/class/ocxl/<afu name>/pp_mmio_size
+Date:		January 2018
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Size of the per-process mmio area, as defined in the
+		configuration space of the AFU
+
+What:		/sys/class/ocxl/<afu name>/global_mmio_size
+Date:		January 2018
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Size of the global mmio area, as defined in the
+		configuration space of the AFU
+
+What:		/sys/class/ocxl/<afu name>/global_mmio_area
+Date:		January 2018
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		Give access the global mmio area for the AFU

Documentation/ABI/testing/sysfs-class-rtc

+What:		/sys/class/rtc/
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		The rtc/ class subdirectory belongs to the RTC subsystem.
+
+What:		/sys/class/rtc/rtcX/
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		The /sys/class/rtc/rtc{0,1,2,3,...} directories correspond
+		to each RTC device.
+
+What:		/sys/class/rtc/rtcX/date
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RO) RTC-provided date in YYYY-MM-DD format
+
+What:		/sys/class/rtc/rtcX/hctosys
+Date:		September 2009
+KernelVersion:	2.6.32
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RO) 1 if the RTC provided the system time at boot via the
+		CONFIG_RTC_HCTOSYS kernel option, 0 otherwise
+
+What:		/sys/class/rtc/rtcX/max_user_freq
+Date:		October 2007
+KernelVersion:	2.6.24
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RW) The maximum interrupt rate an unprivileged user may request
+		from this RTC.
+
+What:		/sys/class/rtc/rtcX/name
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RO) The name of the RTC corresponding to this sysfs directory
+
+What:		/sys/class/rtc/rtcX/since_epoch
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RO) RTC-provided time as the number of seconds since the epoch
+
+What:		/sys/class/rtc/rtcX/time
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RO) RTC-provided time in 24-hour notation (hh:mm:ss)
+
+What:		/sys/class/rtc/rtcX/*/nvmem
+Date:		February 2016
+KernelVersion:	4.6
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RW) The non volatile storage exported as a raw file, as
+		described in Documentation/nvmem/nvmem.txt
+
+What:		/sys/class/rtc/rtcX/offset
+Date:		February 2016
+KernelVersion:	4.6
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RW) The amount which the rtc clock has been adjusted in
+		firmware. Visible only if the driver supports clock offset
+		adjustment. The unit is parts per billion, i.e. The number of
+		clock ticks which are added to or removed from the rtc's base
+		clock per billion ticks. A positive value makes a day pass more
+		slowly, longer, and a negative value makes a day pass more
+		quickly.
+
+What:		/sys/class/rtc/rtcX/wakealarm
+Date:		February 2007
+KernelVersion:	2.6.20
+Contact:	linux-rtc@vger.kernel.org
+Description:
+		(RW) The time at which the clock will generate a system wakeup
+		event. This is a one shot wakeup event, so must be reset after
+		wake if a daily wakeup is required. Format is seconds since the
+		epoch by default, or if there's a leading +, seconds in the
+		future, or if there is a leading +=, seconds ahead of the
+		current alarm.

Documentation/ABI/testing/sysfs-devices-coredump

+What:		/sys/devices/.../coredump
+Date:		December 2017
+Contact:	Arend van Spriel <aspriel@gmail.com>
+Description:
+		The /sys/devices/.../coredump attribute is only present when the
+		device is bound to a driver, which provides the .coredump()
+		callback. The attribute is write only. Anything written to this
+		file will trigger the .coredump() callback.
+
+		Available when CONFIG_DEV_COREDUMP is enabled.

Documentation/ABI/testing/sysfs-driver-samsung-laptop

@@ -3,7 +3,7 @@ Date:		January 1, 2010
 KernelVersion:	2.6.33
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:	Some Samsung laptops have different "performance levels"
-		that are can be modified by a function key, and by this
+		that can be modified by a function key, and by this
 		sysfs file.  These values don't always make a whole lot
 		of sense, but some users like to modify them to keep
 		their fans quiet at all costs.  Reading from this file

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -186,3 +186,9 @@ Date:		August 2017
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:
 		 Controls sleep time of GC urgent mode
+
+What:		/sys/fs/f2fs/<disk>/readdir_ra
+Date:		November 2017
+Contact:	"Sheng Yong" <shengyong1@huawei.com>
+Description:
+		 Controls readahead inode block in readdir.

Documentation/ABI/testing/sysfs-kernel-livepatch

@@ -33,6 +33,32 @@ Description:
 		An attribute which indicates whether the patch is currently in
 		transition.
 
+What:		/sys/kernel/livepatch/<patch>/signal
+Date:		Nov 2017
+KernelVersion:	4.15.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		A writable attribute that allows administrator to affect the
+		course of an existing transition. Writing 1 sends a fake
+		signal to all remaining blocking tasks. The fake signal
+		means that no proper signal is delivered (there is no data in
+		signal pending structures). Tasks are interrupted or woken up,
+		and forced to change their patched state.
+
+What:		/sys/kernel/livepatch/<patch>/force
+Date:		Nov 2017
+KernelVersion:	4.15.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		A writable attribute that allows administrator to affect the
+		course of an existing transition. Writing 1 clears
+		TIF_PATCH_PENDING flag of all tasks and thus forces the tasks to
+		the patched or unpatched state. Administrator should not
+		use this feature without a clearance from a patch
+		distributor. Removal (rmmod) of patch modules is permanently
+		disabled when the feature is used. See
+		Documentation/livepatch/livepatch.txt for more information.
+
 What:		/sys/kernel/livepatch/<patch>/<object>
 Date:		Nov 2014
 KernelVersion:	3.19.0

Documentation/IRQ-domain.txt

@@ -265,37 +265,5 @@ support other architectures, such as ARM, ARM64 etc.
 
 === Debugging ===
 
-If you switch on CONFIG_IRQ_DOMAIN_DEBUG (which depends on
-CONFIG_IRQ_DOMAIN and CONFIG_DEBUG_FS), you will find a new file in
-your debugfs mount point, called irq_domain_mapping. This file
-contains a live snapshot of all the IRQ domains in the system:
-
- name              mapped  linear-max  direct-max  devtree-node
- pl061                  8           8           0  /smb/gpio@e0080000
- pl061                  8           8           0  /smb/gpio@e1050000
- pMSI                   0           0           0  /interrupt-controller@e1101000/v2m@e0080000
- MSI                   37           0           0  /interrupt-controller@e1101000/v2m@e0080000
- GICv2m                37           0           0  /interrupt-controller@e1101000/v2m@e0080000
- GICv2                448         448           0  /interrupt-controller@e1101000
-
-it also iterates over the interrupts to display their mapping in the
-domains, and makes the domain stacking visible:
-
-
-irq    hwirq    chip name        chip data           active  type            domain
-    1  0x00019  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
-    2  0x0001d  GICv2            0xffff00000916bfd8          LINEAR          GICv2
-    3  0x0001e  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
-    4  0x0001b  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
-    5  0x0001a  GICv2            0xffff00000916bfd8          LINEAR          GICv2
-[...]
-   96  0x81808  MSI              0x          (null)           RADIX          MSI
-   96+ 0x00063  GICv2m           0xffff8003ee116980           RADIX          GICv2m
-   96+ 0x00063  GICv2            0xffff00000916bfd8          LINEAR          GICv2
-   97  0x08800  MSI              0x          (null)     *     RADIX          MSI
-   97+ 0x00064  GICv2m           0xffff8003ee116980     *     RADIX          GICv2m
-   97+ 0x00064  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
-
-Here, interrupts 1-5 are only using a single domain, while 96 and 97
-are build out of a stack of three domain, each level performing a
-particular function.
+Most of the internals of the IRQ subsystem are exposed in debugfs by
+turning CONFIG_GENERIC_IRQ_DEBUGFS on.

Documentation/RCU/Design/Data-Structures/Data-Structures.html

@@ -1097,7 +1097,8 @@ will cause the CPU to disregard the values of its counters on
 its next exit from idle.
 Finally, the <tt>rcu_qs_ctr_snap</tt> field is used to detect
 cases where a given operation has resulted in a quiescent state
-for all flavors of RCU, for example, <tt>cond_resched_rcu_qs()</tt>.
+for all flavors of RCU, for example, <tt>cond_resched()</tt>
+when RCU has indicated a need for quiescent states.
 
 <h5>RCU Callback Handling</h5>
 
@@ -1182,8 +1183,8 @@ CPU (and from tracing) unless otherwise stated.
 Its fields are as follows:
 
 <pre>
-  1   int dynticks_nesting;
-  2   int dynticks_nmi_nesting;
+  1   long dynticks_nesting;
+  2   long dynticks_nmi_nesting;
   3   atomic_t dynticks;
   4   bool rcu_need_heavy_qs;
   5   unsigned long rcu_qs_ctr;
@@ -1191,15 +1192,31 @@ Its fields are as follows:
 </pre>
 
 <p>The <tt>-&gt;dynticks_nesting</tt> field counts the
-nesting depth of normal interrupts.
-In addition, this counter is incremented when exiting dyntick-idle
-mode and decremented when entering it.
+nesting depth of process execution, so that in normal circumstances
+this counter has value zero or one.
+NMIs, irqs, and tracers are counted by the <tt>-&gt;dynticks_nmi_nesting</tt>
+field.
+Because NMIs cannot be masked, changes to this variable have to be
+undertaken carefully using an algorithm provided by Andy Lutomirski.
+The initial transition from idle adds one, and nested transitions
+add two, so that a nesting level of five is represented by a
+<tt>-&gt;dynticks_nmi_nesting</tt> value of nine.
 This counter can therefore be thought of as counting the number
 of reasons why this CPU cannot be permitted to enter dyntick-idle
-mode, aside from non-maskable interrupts (NMIs).
-NMIs are counted by the <tt>-&gt;dynticks_nmi_nesting</tt>
-field, except that NMIs that interrupt non-dyntick-idle execution
-are not counted.
+mode, aside from process-level transitions.
+
+<p>However, it turns out that when running in non-idle kernel context,
+the Linux kernel is fully capable of entering interrupt handlers that
+never exit and perhaps also vice versa.
+Therefore, whenever the <tt>-&gt;dynticks_nesting</tt> field is
+incremented up from zero, the <tt>-&gt;dynticks_nmi_nesting</tt> field
+is set to a large positive number, and whenever the
+<tt>-&gt;dynticks_nesting</tt> field is decremented down to zero,
+the the <tt>-&gt;dynticks_nmi_nesting</tt> field is set to zero.
+Assuming that the number of misnested interrupts is not sufficient
+to overflow the counter, this approach corrects the
+<tt>-&gt;dynticks_nmi_nesting</tt> field every time the corresponding
+CPU enters the idle loop from process context.
 
 </p><p>The <tt>-&gt;dynticks</tt> field counts the corresponding
 CPU's transitions to and from dyntick-idle mode, so that this counter
@@ -1231,14 +1248,16 @@ in response.
 <tr><th>&nbsp;</th></tr>
 <tr><th align="left">Quick Quiz:</th></tr>
 <tr><td>
-	Why not just count all NMIs?
-	Wouldn't that be simpler and less error prone?
+	Why not simply combine the <tt>-&gt;dynticks_nesting</tt>
+	and <tt>-&gt;dynticks_nmi_nesting</tt> counters into a
+	single counter that just counts the number of reasons that
+	the corresponding CPU is non-idle?
 </td></tr>
 <tr><th align="left">Answer:</th></tr>
 <tr><td bgcolor="#ffffff"><font color="ffffff">
-	It seems simpler only until you think hard about how to go about
-	updating the <tt>rcu_dynticks</tt> structure's
-	<tt>-&gt;dynticks</tt> field.
+	Because this would fail in the presence of interrupts whose
+	handlers never return and of handlers that manage to return
+	from a made-up interrupt.
 </font></td></tr>
 <tr><td>&nbsp;</td></tr>
 </table>

Documentation/RCU/Design/Requirements/Requirements.html

@@ -581,7 +581,8 @@ This guarantee was only partially premeditated.
 DYNIX/ptx used an explicit memory barrier for publication, but had nothing
 resembling <tt>rcu_dereference()</tt> for subscription, nor did it
 have anything resembling the <tt>smp_read_barrier_depends()</tt>
-that was later subsumed into <tt>rcu_dereference()</tt>.
+that was later subsumed into <tt>rcu_dereference()</tt> and later
+still into <tt>READ_ONCE()</tt>.
 The need for these operations made itself known quite suddenly at a
 late-1990s meeting with the DEC Alpha architects, back in the days when
 DEC was still a free-standing company.
@@ -2797,7 +2798,7 @@ RCU must avoid degrading real-time response for CPU-bound threads, whether
 executing in usermode (which is one use case for
 <tt>CONFIG_NO_HZ_FULL=y</tt>) or in the kernel.
 That said, CPU-bound loops in the kernel must execute
-<tt>cond_resched_rcu_qs()</tt> at least once per few tens of milliseconds
+<tt>cond_resched()</tt> at least once per few tens of milliseconds
 in order to avoid receiving an IPI from RCU.
 
 <p>
@@ -3128,7 +3129,7 @@ The solution, in the form of
 is to have implicit
 read-side critical sections that are delimited by voluntary context
 switches, that is, calls to <tt>schedule()</tt>,
-<tt>cond_resched_rcu_qs()</tt>, and
+<tt>cond_resched()</tt>, and
 <tt>synchronize_rcu_tasks()</tt>.
 In addition, transitions to and from userspace execution also delimit
 tasks-RCU read-side critical sections.

Documentation/RCU/rcu_dereference.txt

@@ -122,11 +122,7 @@ o	Be very careful about comparing pointers obtained from
 		Note that if checks for being within an RCU read-side
 		critical section are not required and the pointer is never
 		dereferenced, rcu_access_pointer() should be used in place
-		of rcu_dereference(). The rcu_access_pointer() primitive
-		does not require an enclosing read-side critical section,
-		and also omits the smp_read_barrier_depends() included in
-		rcu_dereference(), which in turn should provide a small
-		performance gain in some CPUs (e.g., the DEC Alpha).
+		of rcu_dereference().
 
 	o	The comparison is against a pointer that references memory
 		that was initialized "a long time ago."  The reason

Documentation/RCU/stallwarn.txt

@@ -23,12 +23,10 @@ o	A CPU looping with preemption disabled.  This condition can
 o	A CPU looping with bottom halves disabled.  This condition can
 	result in RCU-sched and RCU-bh stalls.
 
-o	For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the
-	kernel without invoking schedule().  Note that cond_resched()
-	does not necessarily prevent RCU CPU stall warnings.  Therefore,
-	if the looping in the kernel is really expected and desirable
-	behavior, you might need to replace some of the cond_resched()
-	calls with calls to cond_resched_rcu_qs().
+o	For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
+	without invoking schedule().  If the looping in the kernel is
+	really expected and desirable behavior, you might need to add
+	some calls to cond_resched().
 
 o	Booting Linux using a console connection that is too slow to
 	keep up with the boot-time console-message rate.  For example,

Documentation/RCU/whatisRCU.txt

@@ -600,8 +600,7 @@ don't forget about them when submitting patches making use of RCU!]
 
 	#define rcu_dereference(p) \
 	({ \
-		typeof(p) _________p1 = p; \
-		smp_read_barrier_depends(); \
+		typeof(p) _________p1 = READ_ONCE(p); \
 		(_________p1); \
 	})
 

Documentation/accelerators/ocxl.rst

+========================================================
+OpenCAPI (Open Coherent Accelerator Processor Interface)
+========================================================
+
+OpenCAPI is an interface between processors and accelerators. It aims
+at being low-latency and high-bandwidth. The specification is
+developed by the `OpenCAPI Consortium <http://opencapi.org/>`_.
+
+It allows an accelerator (which could be a FPGA, ASICs, ...) to access
+the host memory coherently, using virtual addresses. An OpenCAPI
+device can also host its own memory, that can be accessed from the
+host.
+
+OpenCAPI is known in linux as 'ocxl', as the open, processor-agnostic
+evolution of 'cxl' (the driver for the IBM CAPI interface for
+powerpc), which was named that way to avoid confusion with the ISDN
+CAPI subsystem.
+
+
+High-level view
+===============
+
+OpenCAPI defines a Data Link Layer (DL) and Transaction Layer (TL), to
+be implemented on top of a physical link. Any processor or device
+implementing the DL and TL can start sharing memory.
+
+::
+
+  +-----------+                         +-------------+
+  |           |                         |             |
+  |           |                         | Accelerated |
+  | Processor |                         |  Function   |
+  |           |  +--------+             |    Unit     |  +--------+
+  |           |--| Memory |             |    (AFU)    |--| Memory |
+  |           |  +--------+             |             |  +--------+
+  +-----------+                         +-------------+
+       |                                       |
+  +-----------+                         +-------------+
+  |    TL     |                         |    TLX      |
+  +-----------+                         +-------------+
+       |                                       |
+  +-----------+                         +-------------+
+  |    DL     |                         |    DLX      |
+  +-----------+                         +-------------+
+       |                                       |
+       |                   PHY                 |
+       +---------------------------------------+
+
+
+
+Device discovery
+================
+
+OpenCAPI relies on a PCI-like configuration space, implemented on the
+device. So the host can discover AFUs by querying the config space.
+
+OpenCAPI devices in Linux are treated like PCI devices (with a few
+caveats). The firmware is expected to abstract the hardware as if it
+was a PCI link. A lot of the existing PCI infrastructure is reused:
+devices are scanned and BARs are assigned during the standard PCI
+enumeration. Commands like 'lspci' can therefore be used to see what
+devices are available.
+
+The configuration space defines the AFU(s) that can be found on the
+physical adapter, such as its name, how many memory contexts it can
+work with, the size of its MMIO areas, ...
+
+
+
+MMIO
+====
+
+OpenCAPI defines two MMIO areas for each AFU:
+
+* the global MMIO area, with registers pertinent to the whole AFU.
+* a per-process MMIO area, which has a fixed size for each context.
+
+
+
+AFU interrupts
+==============
+
+OpenCAPI includes the possibility for an AFU to send an interrupt to a
+host process. It is done through a 'intrp_req' defined in the
+Transaction Layer, specifying a 64-bit object handle which defines the
+interrupt.
+
+The driver allows a process to allocate an interrupt and obtain its
+64-bit object handle, that can be passed to the AFU.
+
+
+
+char devices
+============
+
+The driver creates one char device per AFU found on the physical
+device. A physical device may have multiple functions and each
+function can have multiple AFUs. At the time of this writing though,
+it has only been tested with devices exporting only one AFU.
+
+Char devices can be found in /dev/ocxl/ and are named as:
+/dev/ocxl/<AFU name>.<location>.<index>
+
+where <AFU name> is a max 20-character long name, as found in the
+config space of the AFU.
+<location> is added by the driver and can help distinguish devices
+when a system has more than one instance of the same OpenCAPI device.
+<index> is also to help distinguish AFUs in the unlikely case where a
+device carries multiple copies of the same AFU.
+
+
+
+Sysfs class
+===========
+
+An ocxl class is added for the devices representing the AFUs. See
+/sys/class/ocxl. The layout is described in
+Documentation/ABI/testing/sysfs-class-ocxl
+
+
+
+User API
+========
+
+open
+----
+
+Based on the AFU definition found in the config space, an AFU may
+support working with more than one memory context, in which case the
+associated char device may be opened multiple times by different
+processes.
+
+
+ioctl
+-----
+
+OCXL_IOCTL_ATTACH:
+
+  Attach the memory context of the calling process to the AFU so that
+  the AFU can access its memory.
+
+OCXL_IOCTL_IRQ_ALLOC:
+
+  Allocate an AFU interrupt and return an identifier.
+
+OCXL_IOCTL_IRQ_FREE:
+
+  Free a previously allocated AFU interrupt.
+
+OCXL_IOCTL_IRQ_SET_FD:
+
+  Associate an event fd to an AFU interrupt so that the user process
+  can be notified when the AFU sends an interrupt.
+
+
+mmap
+----
+
+A process can mmap the per-process MMIO area for interactions with the
+AFU.

Documentation/admin-guide/README.rst

@@ -170,11 +170,6 @@ Configuring the kernel
                         your existing ./.config file and asking about
                         new config symbols.
 
-     "make silentoldconfig"
-                        Like above, but avoids cluttering the screen
-                        with questions already answered.
-                        Additionally updates the dependencies.
-
      "make olddefconfig"
                         Like above, but sets new symbols to their default
                         values without prompting.

Documentation/admin-guide/kernel-parameters.txt

@@ -114,7 +114,6 @@
 			This facility can be used to prevent such uncontrolled
 			GPE floodings.
 			Format: <int>
-			Support masking of GPEs numbered from 0x00 to 0x7f.
 
 	acpi_no_auto_serialize	[HW,ACPI]
 			Disable auto-serialization of AML methods
@@ -223,7 +222,7 @@
 
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
-				  old_ordering, nonvs, sci_force_enable }
+				  old_ordering, nonvs, sci_force_enable, nobl }
 			See Documentation/power/video.txt for information on
 			s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
@@ -239,6 +238,9 @@
 			sci_force_enable causes the kernel to set SCI_EN directly
 			on resume from S1/S3 (which is against the ACPI spec,
 			but some broken systems don't work without it).
+			nobl causes the internal blacklist of systems known to
+			behave incorrectly in some ways with respect to system
+			suspend and resume to be ignored (use wisely).
 
 	acpi_use_timer_override [HW,ACPI]
 			Use timer override. For some broken Nvidia NF5 boards
@@ -644,6 +646,20 @@
 			console=brl,ttyS0
 		For now, only VisioBraille is supported.
 
+	console_msg_format=
+			[KNL] Change console messages format
+		default
+			By default we print messages on consoles in
+			"[time stamp] text\n" format (time stamp may not be
+			printed, depending on CONFIG_PRINTK_TIME or
+			`printk_time' param).
+		syslog
+			Switch to syslog format: "<%u>[time stamp] text\n"
+			IOW, each message will have a facility and loglevel
+			prefix. The format is similar to one used by syslog()
+			syscall, or to executing "dmesg -S --raw" or to reading
+			from /proc/kmsg.
+
 	consoleblank=	[KNL] The console blank (screen saver) timeout in
 			seconds. A value of 0 disables the blank timer.
                        Defaults to 0.
@@ -915,9 +931,12 @@
 
 	earlycon=	[KNL] Output early console device and options.
 
-			When used with no options, the early console is
-			determined by the stdout-path property in device
-			tree's chosen node.
+			[ARM64] The early console is determined by the
+			stdout-path property in device tree's chosen node,
+			or determined by the ACPI SPCR table.
+
+			[X86] When used with no options the early console is
+			determined by the ACPI SPCR table.
 
 		cdns,<addr>[,options]
 			Start an early, polled-mode console on a Cadence
@@ -2050,9 +2069,6 @@
 			This tests the locking primitive's ability to
 			transition abruptly to and from idle.
 
-	locktorture.torture_runnable= [BOOT]
-			Start locktorture running at boot time.
-
 	locktorture.torture_type= [KNL]
 			Specify the locking implementation to test.
 
@@ -2539,6 +2555,9 @@
 			This is useful when you use a panic=... timeout and
 			need the box quickly up again.
 
+			These settings can be accessed at runtime via
+			the nmi_watchdog and hardlockup_panic sysctls.
+
 	netpoll.carrier_timeout=
 			[NET] Specifies amount of time (in seconds) that
 			netpoll should wait for a carrier. By default netpoll
@@ -2742,8 +2761,6 @@
 	norandmaps	Don't use address space randomization.  Equivalent to
 			echo 0 > /proc/sys/kernel/randomize_va_space
 
-	noreplace-paravirt	[X86,IA-64,PV_OPS] Don't patch paravirt_ops
-
 	noreplace-smp	[X86-32,SMP] Don't replace SMP instructions
 			with UP alternatives
 
@@ -3486,9 +3503,6 @@
 			the same as for rcuperf.nreaders.
 			N, where N is the number of CPUs
 
-	rcuperf.perf_runnable= [BOOT]
-			Start rcuperf running at boot time.
-
 	rcuperf.perf_type= [KNL]
 			Specify the RCU implementation to test.
 
@@ -3622,9 +3636,6 @@
 			Test RCU's dyntick-idle handling.  See also the
 			rcutorture.shuffle_interval parameter.
 
-	rcutorture.torture_runnable= [BOOT]
-			Start rcutorture running at boot time.
-
 	rcutorture.torture_type= [KNL]
 			Specify the RCU implementation to test.
 
@@ -3682,7 +3693,8 @@
 
 	rdt=		[HW,X86,RDT]
 			Turn on/off individual RDT features. List is:
-			cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, mba.
+			cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, l2cdp,
+			mba.
 			E.g. to turn on cmt and turn off mba use:
 				rdt=cmt,!mba
 
@@ -3702,7 +3714,11 @@
 			[KNL, SMP] Set scheduler's default relax_domain_level.
 			See Documentation/cgroup-v1/cpusets.txt.
 
-	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
+	reserve=	[KNL,BUGS] Force kernel to ignore I/O ports or memory
+			Format: <base1>,<size1>[,<base2>,<size2>,...]
+			Reserve I/O ports or memory so the kernel won't use
+			them.  If <base> is less than 0x10000, the region
+			is assumed to be I/O ports; otherwise it is memory.
 
 	reservetop=	[X86-32]
 			Format: nn[KMG]

Documentation/admin-guide/mono.rst

@@ -9,14 +9,14 @@ This will allow you to execute Mono-based .NET binaries just like any
 other program after you have done the following:
 
 1) You MUST FIRST install the Mono CLR support, either by downloading
-   a binary package, a source tarball or by installing from CVS. Binary
+   a binary package, a source tarball or by installing from Git. Binary
    packages for several distributions can be found at:
 
-	http://go-mono.com/download.html
+	http://www.mono-project.com/download/
 
    Instructions for compiling Mono can be found at:
 
-	http://www.go-mono.com/compiling.html
+	http://www.mono-project.com/docs/compiling-mono/linux/
 
    Once the Mono CLR support has been installed, just check that
    ``/usr/bin/mono`` (which could be located elsewhere, for example

Documentation/admin-guide/thunderbolt.rst

@@ -3,13 +3,13 @@
 =============
 The interface presented here is not meant for end users. Instead there
 should be a userspace tool that handles all the low-level details, keeps
-database of the authorized devices and prompts user for new connections.
+a database of the authorized devices and prompts users for new connections.
 
 More details about the sysfs interface for Thunderbolt devices can be
 found in ``Documentation/ABI/testing/sysfs-bus-thunderbolt``.
 
 Those users who just want to connect any device without any sort of
-manual work, can add following line to
+manual work can add following line to
 ``/etc/udev/rules.d/99-local.rules``::
 
   ACTION=="add", SUBSYSTEM=="thunderbolt", ATTR{authorized}=="0", ATTR{authorized}="1"
@@ -20,7 +20,7 @@ vulnerable to DMA attacks.
 
 Security levels and how to use them
 -----------------------------------
-Starting from Intel Falcon Ridge Thunderbolt controller there are 4
+Starting with Intel Falcon Ridge Thunderbolt controller there are 4
 security levels available. The reason for these is the fact that the
 connected devices can be DMA masters and thus read contents of the host
 memory without CPU and OS knowing about it. There are ways to prevent
@@ -37,14 +37,14 @@ The security levels are as follows:
   user
     User is asked whether the device is allowed to be connected.
     Based on the device identification information available through
-    ``/sys/bus/thunderbolt/devices``. user then can do the decision.
+    ``/sys/bus/thunderbolt/devices``, the user then can make the decision.
     In BIOS settings this is typically called *Unique ID*.
 
   secure
     User is asked whether the device is allowed to be connected. In
     addition to UUID the device (if it supports secure connect) is sent
     a challenge that should match the expected one based on a random key
-    written to ``key`` sysfs attribute. In BIOS settings this is
+    written to the ``key`` sysfs attribute. In BIOS settings this is
     typically called *One time saved key*.
 
   dponly
@@ -78,7 +78,7 @@ When a device is plugged in it will appear in sysfs as follows::
   /sys/bus/thunderbolt/devices/0-1/unique_id	- e0376f00-0300-0100-ffff-ffffffffffff
 
 The ``authorized`` attribute reads 0 which means no PCIe tunnels are
-created yet. The user can authorize the device by simply::
+created yet. The user can authorize the device by simply entering::
 
   # echo 1 > /sys/bus/thunderbolt/devices/0-1/authorized
 
@@ -86,7 +86,7 @@ This will create the PCIe tunnels and the device is now connected.
 
 If the device supports secure connect, and the domain security level is
 set to ``secure``, it has an additional attribute ``key`` which can hold
-a random 32 byte value used for authorization and challenging the device in
+a random 32-byte value used for authorization and challenging the device in
 future connects::
 
   /sys/bus/thunderbolt/devices/0-3/authorized	- 0
@@ -99,12 +99,12 @@ future connects::
 
 Notice the key is empty by default.
 
-If the user does not want to use secure connect it can just ``echo 1``
+If the user does not want to use secure connect they can just ``echo 1``
 to the ``authorized`` attribute and the PCIe tunnels will be created in
-the same way than in ``user`` security level.
+the same way as in the ``user`` security level.
 
 If the user wants to use secure connect, the first time the device is
-plugged a key needs to be created and send to the device::
+plugged a key needs to be created and sent to the device::
 
   # key=$(openssl rand -hex 32)
   # echo $key > /sys/bus/thunderbolt/devices/0-3/key
@@ -121,27 +121,27 @@ device using the same key::
 
 If the challenge the device returns back matches the one we expect based
 on the key, the device is connected and the PCIe tunnels are created.
-However, if the challenge failed no tunnels are created and error is
+However, if the challenge fails no tunnels are created and error is
 returned to the user.
 
-If the user still wants to connect the device it can either approve
-the device without a key or write new key and write 1 to the
+If the user still wants to connect the device they can either approve
+the device without a key or write a new key and write 1 to the
 ``authorized`` file to get the new key stored on the device NVM.
 
 Upgrading NVM on Thunderbolt device or host
 -------------------------------------------
-Since most of the functionality is handled in a firmware running on a
+Since most of the functionality is handled in firmware running on a
 host controller or a device, it is important that the firmware can be
 upgraded to the latest where possible bugs in it have been fixed.
 Typically OEMs provide this firmware from their support site.
 
-There is also a central site which has links where to download firmwares
+There is also a central site which has links where to download firmware
 for some machines:
 
   `Thunderbolt Updates <https://thunderbolttechnology.net/updates>`_
 
-Before you upgrade firmware on a device or host, please make sure it is
-the suitable. Failing to do that may render the device (or host) in a
+Before you upgrade firmware on a device or host, please make sure it is a
+suitable upgrade. Failing to do that may render the device (or host) in a
 state where it cannot be used properly anymore without special tools!
 
 Host NVM upgrade on Apple Macs is not supported.
@@ -151,7 +151,7 @@ Thunderbolt device so that the host controller appears. It does not
 matter which device is connected (unless you are upgrading NVM on a
 device - then you need to connect that particular device).
 
-Note OEM-specific method to power the controller up ("force power") may
+Note an OEM-specific method to power the controller up ("force power") may
 be available for your system in which case there is no need to plug in a
 Thunderbolt device.
 
@@ -171,7 +171,7 @@ it comes back the driver notices it and initiates a full power cycle.
 After a while the host controller appears again and this time it should
 be fully functional.
 
-We can verify that the new NVM firmware is active by running following
+We can verify that the new NVM firmware is active by running the following
 commands::
 
   # cat /sys/bus/thunderbolt/devices/0-0/nvm_authenticate
@@ -179,38 +179,38 @@ commands::
   # cat /sys/bus/thunderbolt/devices/0-0/nvm_version
   18.0
 
-If ``nvm_authenticate`` contains anything else than 0x0 it is the error
+If ``nvm_authenticate`` contains anything other than 0x0 it is the error
 code from the last authentication cycle, which means the authentication
 of the NVM image failed.
 
 Note names of the NVMem devices ``nvm_activeN`` and ``nvm_non_activeN``
-depends on the order they are registered in the NVMem subsystem. N in
+depend on the order they are registered in the NVMem subsystem. N in
 the name is the identifier added by the NVMem subsystem.
 
 Upgrading NVM when host controller is in safe mode
 --------------------------------------------------
 If the existing NVM is not properly authenticated (or is missing) the
-host controller goes into safe mode which means that only available
-functionality is flashing new NVM image. When in this mode the reading
+host controller goes into safe mode which means that the only available
+functionality is flashing a new NVM image. When in this mode, reading
 ``nvm_version`` fails with ``ENODATA`` and the device identification
 information is missing.
 
 To recover from this mode, one needs to flash a valid NVM image to the
-host host controller in the same way it is done in the previous chapter.
+host controller in the same way it is done in the previous chapter.
 
 Networking over Thunderbolt cable
 ---------------------------------
-Thunderbolt technology allows software communication across two hosts
+Thunderbolt technology allows software communication between two hosts
 connected by a Thunderbolt cable.
 
-It is possible to tunnel any kind of traffic over Thunderbolt link but
+It is possible to tunnel any kind of traffic over a Thunderbolt link but
 currently we only support Apple ThunderboltIP protocol.
 
-If the other host is running Windows or macOS only thing you need to
-do is to connect Thunderbolt cable between the two hosts, the
-``thunderbolt-net`` is loaded automatically. If the other host is also
-Linux you should load ``thunderbolt-net`` manually on one host (it does
-not matter which one)::
+If the other host is running Windows or macOS, the only thing you need to
+do is to connect a Thunderbolt cable between the two hosts; the
+``thunderbolt-net`` driver is loaded automatically. If the other host is
+also Linux you should load ``thunderbolt-net`` manually on one host (it
+does not matter which one)::
 
   # modprobe thunderbolt-net
 
@@ -220,12 +220,12 @@ is built-in to the kernel image, there is no need to do anything.
 The driver will create one virtual ethernet interface per Thunderbolt
 port which are named like ``thunderbolt0`` and so on. From this point
 you can either use standard userspace tools like ``ifconfig`` to
-configure the interface or let your GUI to handle it automatically.
+configure the interface or let your GUI handle it automatically.
 
 Forcing power
 -------------
 Many OEMs include a method that can be used to force the power of a
-thunderbolt controller to an "On" state even if nothing is connected.
+Thunderbolt controller to an "On" state even if nothing is connected.
 If supported by your machine this will be exposed by the WMI bus with
 a sysfs attribute called "force_power".
 

Documentation/arm64/cpu-feature-registers.txt

@@ -110,7 +110,9 @@ infrastructure:
      x--------------------------------------------------x
      | Name                         |  bits   | visible |
      |--------------------------------------------------|
-     | RES0                         | [63-48] |    n    |
+     | RES0                         | [63-52] |    n    |
+     |--------------------------------------------------|
+     | FHM                          | [51-48] |    y    |
      |--------------------------------------------------|
      | DP                           | [47-44] |    y    |
      |--------------------------------------------------|

Documentation/arm64/elf_hwcaps.txt

@@ -158,3 +158,7 @@ HWCAP_SHA512
 HWCAP_SVE
 
     Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001.
+
+HWCAP_ASIMDFHM
+
+   Functionality implied by ID_AA64ISAR0_EL1.FHM == 0b0001.

Documentation/arm64/silicon-errata.txt

@@ -72,7 +72,7 @@ stable kernels.
 | Hisilicon      | Hip0{6,7}       | #161010701      | N/A                         |
 | Hisilicon      | Hip07           | #161600802      | HISILICON_ERRATUM_161600802 |
 |                |                 |                 |                             |
-| Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |
+| Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |
 | Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |
 | Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |

Documentation/cgroup-v1/cgroups.txt

@@ -523,12 +523,7 @@ Accessing a task's cgroup pointer may be done in the following ways:
 Each subsystem should:
 
 - add an entry in linux/cgroup_subsys.h
-- define a cgroup_subsys object called <name>_subsys
-
-If a subsystem can be compiled as a module, it should also have in its
-module initcall a call to cgroup_load_subsys(), and in its exitcall a
-call to cgroup_unload_subsys(). It should also set its_subsys.module =
-THIS_MODULE in its .c file.
+- define a cgroup_subsys object called <name>_cgrp_subsys
 
 Each subsystem may export the following methods. The only mandatory
 methods are css_alloc/free. Any others that are null are presumed to

Documentation/cgroup-v1/memory.txt

@@ -524,9 +524,9 @@ Note:
 	Only anonymous and swap cache memory is listed as part of 'rss' stat.
 	This should not be confused with the true 'resident set size' or the
 	amount of physical memory used by the cgroup.
-	'rss + file_mapped" will give you resident set size of cgroup.
+	'rss + mapped_file" will give you resident set size of cgroup.
 	(Note: file and shmem may be shared among other cgroups. In that case,
-	 file_mapped is accounted only when the memory cgroup is owner of page
+	 mapped_file is accounted only when the memory cgroup is owner of page
 	 cache.)
 
 5.3 swappiness

Documentation/cgroup-v2.txt

@@ -53,10 +53,14 @@ v1 is available under Documentation/cgroup-v1/.
        5-3-2. Writeback
      5-4. PID
        5-4-1. PID Interface Files
-     5-5. RDMA
-       5-5-1. RDMA Interface Files
-     5-6. Misc
-       5-6-1. perf_event
+     5-5. Device
+     5-6. RDMA
+       5-6-1. RDMA Interface Files
+     5-7. Misc
+       5-7-1. perf_event
+     5-N. Non-normative information
+       5-N-1. CPU controller root cgroup process behaviour
+       5-N-2. IO controller root cgroup process behaviour
    6. Namespace
      6-1. Basics
      6-2. The Root and Views
@@ -279,7 +283,7 @@ thread mode, the following conditions must be met.
   exempt from this requirement.
 
 Topology-wise, a cgroup can be in an invalid state.  Please consider
-the following toplogy::
+the following topology::
 
   A (threaded domain) - B (threaded) - C (domain, just created)
 
@@ -420,7 +424,9 @@ The root cgroup is exempt from this restriction.  Root contains
 processes and anonymous resource consumption which can't be associated
 with any other cgroups and requires special treatment from most
 controllers.  How resource consumption in the root cgroup is governed
-is up to each controller.
+is up to each controller (for more information on this topic please
+refer to the Non-normative information section in the Controllers
+chapter).
 
 Note that the restriction doesn't get in the way if there is no
 enabled controller in the cgroup's "cgroup.subtree_control".  This is
@@ -1063,10 +1069,10 @@ PAGE_SIZE multiple when read back.
 		reached the limit and allocation was about to fail.
 
 		Depending on context result could be invocation of OOM
-		killer and retrying allocation or failing alloction.
+		killer and retrying allocation or failing allocation.
 
 		Failed allocation in its turn could be returned into
-		userspace as -ENOMEM or siletly ignored in cases like
+		userspace as -ENOMEM or silently ignored in cases like
 		disk readahead.  For now OOM in memory cgroup kills
 		tasks iff shortage has happened inside page fault.
 
@@ -1191,7 +1197,7 @@ PAGE_SIZE multiple when read back.
 	cgroups.  The default is "max".
 
 	Swap usage hard limit.  If a cgroup's swap usage reaches this
-	limit, anonymous meomry of the cgroup will not be swapped out.
+	limit, anonymous memory of the cgroup will not be swapped out.
 
 
 Usage Guidelines
@@ -1429,6 +1435,30 @@ through fork() or clone(). These will return -EAGAIN if the creation
 of a new process would cause a cgroup policy to be violated.
 
 
+Device controller
+-----------------
+
+Device controller manages access to device files. It includes both
+creation of new device files (using mknod), and access to the
+existing device files.
+
+Cgroup v2 device controller has no interface files and is implemented
+on top of cgroup BPF. To control access to device files, a user may
+create bpf programs of the BPF_CGROUP_DEVICE type and attach them
+to cgroups. On an attempt to access a device file, corresponding
+BPF programs will be executed, and depending on the return value
+the attempt will succeed or fail with -EPERM.
+
+A BPF_CGROUP_DEVICE program takes a pointer to the bpf_cgroup_dev_ctx
+structure, which describes the device access attempt: access type
+(mknod/read/write) and device (type, major and minor numbers).
+If the program returns 0, the attempt fails with -EPERM, otherwise
+it succeeds.
+
+An example of BPF_CGROUP_DEVICE program may be found in the kernel
+source tree in the tools/testing/selftests/bpf/dev_cgroup.c file.
+
+
 RDMA
 ----
 
@@ -1481,6 +1511,35 @@ always be filtered by cgroup v2 path.  The controller can still be
 moved to a legacy hierarchy after v2 hierarchy is populated.
 
 
+Non-normative information
+-------------------------
+
+This section contains information that isn't considered to be a part of
+the stable kernel API and so is subject to change.
+
+
+CPU controller root cgroup process behaviour
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When distributing CPU cycles in the root cgroup each thread in this
+cgroup is treated as if it was hosted in a separate child cgroup of the
+root cgroup. This child cgroup weight is dependent on its thread nice
+level.
+
+For details of this mapping see sched_prio_to_weight array in
+kernel/sched/core.c file (values from this array should be scaled
+appropriately so the neutral - nice 0 - value is 100 instead of 1024).
+
+
+IO controller root cgroup process behaviour
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Root cgroup processes are hosted in an implicit leaf child node.
+When distributing IO resources this implicit child node is taken into
+account as if it was a normal child cgroup of the root cgroup with a
+weight value of 200.
+
+
 Namespace
 =========
 

Documentation/circular-buffers.txt

@@ -220,8 +220,7 @@ before it writes the new tail pointer, which will erase the item.
 
 Note the use of READ_ONCE() and smp_load_acquire() to read the
 opposition index.  This prevents the compiler from discarding and
-reloading its cached value - which some compilers will do across
-smp_read_barrier_depends().  This isn't strictly needed if you can
+reloading its cached value.  This isn't strictly needed if you can
 be sure that the opposition index will _only_ be used the once.
 The smp_load_acquire() additionally forces the CPU to order against
 subsequent memory references.  Similarly, smp_store_release() is used

Documentation/conf.py

@@ -88,7 +88,6 @@ finally:
     if makefile_version and makefile_patchlevel:
         version = release = makefile_version + '.' + makefile_patchlevel
     else:
-        sys.stderr.write('Warning: Could not extract kernel version\n')
         version = release = "unknown version"
 
 # The language for content autogenerated by Sphinx. Refer to documentation

Documentation/core-api/errseq.rst

+=====================
+The errseq_t datatype
+=====================
+
+An errseq_t is a way of recording errors in one place, and allowing any
+number of "subscribers" to tell whether it has changed since a previous
+point where it was sampled.
+
+The initial use case for this is tracking errors for file
+synchronization syscalls (fsync, fdatasync, msync and sync_file_range),
+but it may be usable in other situations.
+
+It's implemented as an unsigned 32-bit value.  The low order bits are
+designated to hold an error code (between 1 and MAX_ERRNO).  The upper bits
+are used as a counter.  This is done with atomics instead of locking so that
+these functions can be called from any context.
+
+Note that there is a risk of collisions if new errors are being recorded
+frequently, since we have so few bits to use as a counter.
+
+To mitigate this, the bit between the error value and counter is used as
+a flag to tell whether the value has been sampled since a new value was
+recorded.  That allows us to avoid bumping the counter if no one has
+sampled it since the last time an error was recorded.
+
+Thus we end up with a value that looks something like this:
+
++--------------------------------------+----+------------------------+
+| 31..13                               | 12 | 11..0                  |
++--------------------------------------+----+------------------------+
+| counter                              | SF | errno                  |
++--------------------------------------+----+------------------------+
+
+The general idea is for "watchers" to sample an errseq_t value and keep
+it as a running cursor.  That value can later be used to tell whether
+any new errors have occurred since that sampling was done, and atomically
+record the state at the time that it was checked.  This allows us to
+record errors in one place, and then have a number of "watchers" that
+can tell whether the value has changed since they last checked it.
+
+A new errseq_t should always be zeroed out.  An errseq_t value of all zeroes
+is the special (but common) case where there has never been an error. An all
+zero value thus serves as the "epoch" if one wishes to know whether there
+has ever been an error set since it was first initialized.
+
+API usage
+=========
+
+Let me tell you a story about a worker drone.  Now, he's a good worker
+overall, but the company is a little...management heavy.  He has to
+report to 77 supervisors today, and tomorrow the "big boss" is coming in
+from out of town and he's sure to test the poor fellow too.
+
+They're all handing him work to do -- so much he can't keep track of who
+handed him what, but that's not really a big problem.  The supervisors
+just want to know when he's finished all of the work they've handed him so
+far and whether he made any mistakes since they last asked.
+
+He might have made the mistake on work they didn't actually hand him,
+but he can't keep track of things at that level of detail, all he can
+remember is the most recent mistake that he made.
+
+Here's our worker_drone representation::
+
+        struct worker_drone {
+                errseq_t        wd_err; /* for recording errors */
+        };
+
+Every day, the worker_drone starts out with a blank slate::
+
+        struct worker_drone wd;
+
+        wd.wd_err = (errseq_t)0;
+
+The supervisors come in and get an initial read for the day.  They
+don't care about anything that happened before their watch begins::
+
+        struct supervisor {
+                errseq_t        s_wd_err; /* private "cursor" for wd_err */
+                spinlock_t      s_wd_err_lock; /* protects s_wd_err */
+        }
+
+        struct supervisor       su;
+
+        su.s_wd_err = errseq_sample(&wd.wd_err);
+        spin_lock_init(&su.s_wd_err_lock);
+
+Now they start handing him tasks to do.  Every few minutes they ask him to
+finish up all of the work they've handed him so far.  Then they ask him
+whether he made any mistakes on any of it::
+
+        spin_lock(&su.su_wd_err_lock);
+        err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err);
+        spin_unlock(&su.su_wd_err_lock);
+
+Up to this point, that just keeps returning 0.
+
+Now, the owners of this company are quite miserly and have given him
+substandard equipment with which to do his job. Occasionally it
+glitches and he makes a mistake.  He sighs a heavy sigh, and marks it
+down::
+
+        errseq_set(&wd.wd_err, -EIO);
+
+...and then gets back to work.  The supervisors eventually poll again
+and they each get the error when they next check.  Subsequent calls will
+return 0, until another error is recorded, at which point it's reported
+to each of them once.
+
+Note that the supervisors can't tell how many mistakes he made, only
+whether one was made since they last checked, and the latest value
+recorded.
+
+Occasionally the big boss comes in for a spot check and asks the worker
+to do a one-off job for him. He's not really watching the worker
+full-time like the supervisors, but he does need to know whether a
+mistake occurred while his job was processing.
+
+He can just sample the current errseq_t in the worker, and then use that
+to tell whether an error has occurred later::
+
+        errseq_t since = errseq_sample(&wd.wd_err);
+        /* submit some work and wait for it to complete */
+        err = errseq_check(&wd.wd_err, since);
+
+Since he's just going to discard "since" after that point, he doesn't
+need to advance it here. He also doesn't need any locking since it's
+not usable by anyone else.
+
+Serializing errseq_t cursor updates
+===================================
+
+Note that the errseq_t API does not protect the errseq_t cursor during a
+check_and_advance_operation. Only the canonical error code is handled
+atomically.  In a situation where more than one task might be using the
+same errseq_t cursor at the same time, it's important to serialize
+updates to that cursor.
+
+If that's not done, then it's possible for the cursor to go backward
+in which case the same error could be reported more than once.
+
+Because of this, it's often advantageous to first do an errseq_check to
+see if anything has changed, and only later do an
+errseq_check_and_advance after taking the lock. e.g.::
+
+        if (errseq_check(&wd.wd_err, READ_ONCE(su.s_wd_err)) {
+                /* su.s_wd_err is protected by s_wd_err_lock */
+                spin_lock(&su.s_wd_err_lock);
+                err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err);
+                spin_unlock(&su.s_wd_err_lock);
+        }
+
+That avoids the spinlock in the common case where nothing has changed
+since the last time it was checked.
+
+Functions
+=========
+
+.. kernel-doc:: lib/errseq.c

Documentation/core-api/idr.rst

+.. SPDX-License-Identifier: CC-BY-SA-4.0
+
+=============
+ID Allocation
+=============
+
+:Author: Matthew Wilcox
+
+Overview
+========
+
+A common problem to solve is allocating identifiers (IDs); generally
+small numbers which identify a thing.  Examples include file descriptors,
+process IDs, packet identifiers in networking protocols, SCSI tags
+and device instance numbers.  The IDR and the IDA provide a reasonable
+solution to the problem to avoid everybody inventing their own.  The IDR
+provides the ability to map an ID to a pointer, while the IDA provides
+only ID allocation, and as a result is much more memory-efficient.
+
+IDR usage
+=========
+
+Start by initialising an IDR, either with :c:func:`DEFINE_IDR`
+for statically allocated IDRs or :c:func:`idr_init` for dynamically
+allocated IDRs.
+
+You can call :c:func:`idr_alloc` to allocate an unused ID.  Look up
+the pointer you associated with the ID by calling :c:func:`idr_find`
+and free the ID by calling :c:func:`idr_remove`.
+
+If you need to change the pointer associated with an ID, you can call
+:c:func:`idr_replace`.  One common reason to do this is to reserve an
+ID by passing a ``NULL`` pointer to the allocation function; initialise the
+object with the reserved ID and finally insert the initialised object
+into the IDR.
+
+Some users need to allocate IDs larger than ``INT_MAX``.  So far all of
+these users have been content with a ``UINT_MAX`` limit, and they use
+:c:func:`idr_alloc_u32`.  If you need IDs that will not fit in a u32,
+we will work with you to address your needs.
+
+If you need to allocate IDs sequentially, you can use
+:c:func:`idr_alloc_cyclic`.  The IDR becomes less efficient when dealing
+with larger IDs, so using this function comes at a slight cost.
+
+To perform an action on all pointers used by the IDR, you can
+either use the callback-based :c:func:`idr_for_each` or the
+iterator-style :c:func:`idr_for_each_entry`.  You may need to use
+:c:func:`idr_for_each_entry_continue` to continue an iteration.  You can
+also use :c:func:`idr_get_next` if the iterator doesn't fit your needs.
+
+When you have finished using an IDR, you can call :c:func:`idr_destroy`
+to release the memory used by the IDR.  This will not free the objects
+pointed to from the IDR; if you want to do that, use one of the iterators
+to do it.
+
+You can use :c:func:`idr_is_empty` to find out whether there are any
+IDs currently allocated.
+
+If you need to take a lock while allocating a new ID from the IDR,
+you may need to pass a restrictive set of GFP flags, which can lead
+to the IDR being unable to allocate memory.  To work around this,
+you can call :c:func:`idr_preload` before taking the lock, and then
+:c:func:`idr_preload_end` after the allocation.
+
+.. kernel-doc:: include/linux/idr.h
+   :doc: idr sync
+
+IDA usage
+=========
+
+.. kernel-doc:: lib/idr.c
+   :doc: IDA description
+
+Functions and structures
+========================
+
+.. kernel-doc:: include/linux/idr.h
+.. kernel-doc:: lib/idr.c

Documentation/core-api/index.rst

@@ -14,13 +14,17 @@ Core utilities
    kernel-api
    assoc_array
    atomic_ops
+   refcount-vs-atomic
    cpu_hotplug
+   idr
    local_ops
    workqueue
    genericirq
    flexible-arrays
    librs
    genalloc
+   errseq
+   printk-formats
 
 Interfaces for kernel debugging
 ===============================

Documentation/core-api/kernel-api.rst

@@ -103,18 +103,6 @@ CRC Functions
 .. kernel-doc:: lib/crc-itu-t.c
    :export:
 
-idr/ida Functions
------------------
-
-.. kernel-doc:: include/linux/idr.h
-   :doc: idr sync
-
-.. kernel-doc:: lib/idr.c
-   :doc: IDA description
-
-.. kernel-doc:: lib/idr.c
-   :export:
-
 Math Functions in Linux
 =======================
 
@@ -139,6 +127,21 @@ Division Functions
 .. kernel-doc:: lib/gcd.c
    :export:
 
+Sorting
+-------
+
+.. kernel-doc:: lib/sort.c
+   :export:
+
+.. kernel-doc:: lib/list_sort.c
+   :export:
+
+UUID/GUID
+---------
+
+.. kernel-doc:: lib/uuid.c
+   :export:
+
 Memory Management in Linux
 ==========================
 

Documentation/core-api/printk-formats.rst

+=========================================
+How to get printk format specifiers right
+=========================================
+
+:Author: Randy Dunlap <rdunlap@infradead.org>
+:Author: Andrew Murray <amurray@mpc-data.co.uk>
+
+
+Integer types
+=============
+
+::
+
+	If variable is of Type,		use printk format specifier:
+	------------------------------------------------------------
+		int			%d or %x
+		unsigned int		%u or %x
+		long			%ld or %lx
+		unsigned long		%lu or %lx
+		long long		%lld or %llx
+		unsigned long long	%llu or %llx
+		size_t			%zu or %zx
+		ssize_t			%zd or %zx
+		s32			%d or %x
+		u32			%u or %x
+		s64			%lld or %llx
+		u64			%llu or %llx
+
+
+If <type> is dependent on a config option for its size (e.g., sector_t,
+blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a
+format specifier of its largest possible type and explicitly cast to it.
+
+Example::
+
+	printk("test: sector number/total blocks: %llu/%llu\n",
+		(unsigned long long)sector, (unsigned long long)blockcount);
+
+Reminder: sizeof() returns type size_t.
+
+The kernel's printf does not support %n. Floating point formats (%e, %f,
+%g, %a) are also not recognized, for obvious reasons. Use of any
+unsupported specifier or length qualifier results in a WARN and early
+return from vsnprintf().
+
+Pointer types
+=============
+
+A raw pointer value may be printed with %p which will hash the address
+before printing. The kernel also supports extended specifiers for printing
+pointers of different types.
+
+Plain Pointers
+--------------
+
+::
+
+	%p	abcdef12 or 00000000abcdef12
+
+Pointers printed without a specifier extension (i.e unadorned %p) are
+hashed to prevent leaking information about the kernel memory layout. This
+has the added benefit of providing a unique identifier. On 64-bit machines
+the first 32 bits are zeroed. If you *really* want the address see %px
+below.
+
+Symbols/Function Pointers
+-------------------------
+
+::
+
+	%pS	versatile_init+0x0/0x110
+	%ps	versatile_init
+	%pF	versatile_init+0x0/0x110
+	%pf	versatile_init
+	%pSR	versatile_init+0x9/0x110
+		(with __builtin_extract_return_addr() translation)
+	%pB	prev_fn_of_versatile_init+0x88/0x88
+
+
+The ``S`` and ``s`` specifiers are used for printing a pointer in symbolic
+format. They result in the symbol name with (S) or without (s)
+offsets. If KALLSYMS are disabled then the symbol address is printed instead.
+
+Note, that the ``F`` and ``f`` specifiers are identical to ``S`` (``s``)
+and thus deprecated. We have ``F`` and ``f`` because on ia64, ppc64 and
+parisc64 function pointers are indirect and, in fact, are function
+descriptors, which require additional dereferencing before we can lookup
+the symbol. As of now, ``S`` and ``s`` perform dereferencing on those
+platforms (when needed), so ``F`` and ``f`` exist for compatibility
+reasons only.
+
+The ``B`` specifier results in the symbol name with offsets and should be
+used when printing stack backtraces. The specifier takes into
+consideration the effect of compiler optimisations which may occur
+when tail-calls are used and marked with the noreturn GCC attribute.
+
+Kernel Pointers
+---------------
+
+::
+
+	%pK	01234567 or 0123456789abcdef
+
+For printing kernel pointers which should be hidden from unprivileged
+users. The behaviour of %pK depends on the kptr_restrict sysctl - see
+Documentation/sysctl/kernel.txt for more details.
+
+Unmodified Addresses
+--------------------
+
+::
+
+	%px	01234567 or 0123456789abcdef
+
+For printing pointers when you *really* want to print the address. Please
+consider whether or not you are leaking sensitive information about the
+kernel memory layout before printing pointers with %px. %px is functionally
+equivalent to %lx (or %lu). %px is preferred because it is more uniquely
+grep'able. If in the future we need to modify the way the kernel handles
+printing pointers we will be better equipped to find the call sites.
+
+Struct Resources
+----------------
+
+::
+
+	%pr	[mem 0x60000000-0x6fffffff flags 0x2200] or
+		[mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
+	%pR	[mem 0x60000000-0x6fffffff pref] or
+		[mem 0x0000000060000000-0x000000006fffffff pref]
+
+For printing struct resources. The ``R`` and ``r`` specifiers result in a
+printed resource with (R) or without (r) a decoded flags member.
+
+Passed by reference.
+
+Physical address types phys_addr_t
+----------------------------------
+
+::
+
+	%pa[p]	0x01234567 or 0x0123456789abcdef
+
+For printing a phys_addr_t type (and its derivatives, such as
+resource_size_t) which can vary based on build options, regardless of the
+width of the CPU data path.
+
+Passed by reference.
+
+DMA address types dma_addr_t
+----------------------------
+
+::
+
+	%pad	0x01234567 or 0x0123456789abcdef
+
+For printing a dma_addr_t type which can vary based on build options,
+regardless of the width of the CPU data path.
+
+Passed by reference.
+
+Raw buffer as an escaped string
+-------------------------------
+
+::
+
+	%*pE[achnops]
+
+For printing raw buffer as an escaped string. For the following buffer::
+
+		1b 62 20 5c 43 07 22 90 0d 5d
+
+A few examples show how the conversion would be done (excluding surrounding
+quotes)::
+
+		%*pE		"\eb \C\a"\220\r]"
+		%*pEhp		"\x1bb \C\x07"\x90\x0d]"
+		%*pEa		"\e\142\040\\\103\a\042\220\r\135"
+
+The conversion rules are applied according to an optional combination
+of flags (see :c:func:`string_escape_mem` kernel documentation for the
+details):
+
+	- a - ESCAPE_ANY
+	- c - ESCAPE_SPECIAL
+	- h - ESCAPE_HEX
+	- n - ESCAPE_NULL
+	- o - ESCAPE_OCTAL
+	- p - ESCAPE_NP
+	- s - ESCAPE_SPACE
+
+By default ESCAPE_ANY_NP is used.
+
+ESCAPE_ANY_NP is the sane choice for many cases, in particularly for
+printing SSIDs.
+
+If field width is omitted then 1 byte only will be escaped.
+
+Raw buffer as a hex string
+--------------------------
+
+::
+
+	%*ph	00 01 02  ...  3f
+	%*phC	00:01:02: ... :3f
+	%*phD	00-01-02- ... -3f
+	%*phN	000102 ... 3f
+
+For printing small buffers (up to 64 bytes long) as a hex string with a
+certain separator. For larger buffers consider using
+:c:func:`print_hex_dump`.
+
+MAC/FDDI addresses
+------------------
+
+::
+
+	%pM	00:01:02:03:04:05
+	%pMR	05:04:03:02:01:00
+	%pMF	00-01-02-03-04-05
+	%pm	000102030405
+	%pmR	050403020100
+
+For printing 6-byte MAC/FDDI addresses in hex notation. The ``M`` and ``m``
+specifiers result in a printed address with (M) or without (m) byte
+separators. The default byte separator is the colon (:).
+
+Where FDDI addresses are concerned the ``F`` specifier can be used after
+the ``M`` specifier to use dash (-) separators instead of the default
+separator.
+
+For Bluetooth addresses the ``R`` specifier shall be used after the ``M``
+specifier to use reversed byte order suitable for visual interpretation
+of Bluetooth addresses which are in the little endian order.
+
+Passed by reference.
+
+IPv4 addresses
+--------------
+
+::
+
+	%pI4	1.2.3.4
+	%pi4	001.002.003.004
+	%p[Ii]4[hnbl]
+
+For printing IPv4 dot-separated decimal addresses. The ``I4`` and ``i4``
+specifiers result in a printed address with (i4) or without (I4) leading
+zeros.
+
+The additional ``h``, ``n``, ``b``, and ``l`` specifiers are used to specify
+host, network, big or little endian order addresses respectively. Where
+no specifier is provided the default network/big endian order is used.
+
+Passed by reference.
+
+IPv6 addresses
+--------------
+
+::
+
+	%pI6	0001:0002:0003:0004:0005:0006:0007:0008
+	%pi6	00010002000300040005000600070008
+	%pI6c	1:2:3:4:5:6:7:8
+
+For printing IPv6 network-order 16-bit hex addresses. The ``I6`` and ``i6``
+specifiers result in a printed address with (I6) or without (i6)
+colon-separators. Leading zeros are always used.
+
+The additional ``c`` specifier can be used with the ``I`` specifier to
+print a compressed IPv6 address as described by
+http://tools.ietf.org/html/rfc5952
+
+Passed by reference.
+
+IPv4/IPv6 addresses (generic, with port, flowinfo, scope)
+---------------------------------------------------------
+
+::
+
+	%pIS	1.2.3.4		or 0001:0002:0003:0004:0005:0006:0007:0008
+	%piS	001.002.003.004	or 00010002000300040005000600070008
+	%pISc	1.2.3.4		or 1:2:3:4:5:6:7:8
+	%pISpc	1.2.3.4:12345	or [1:2:3:4:5:6:7:8]:12345
+	%p[Ii]S[pfschnbl]
+
+For printing an IP address without the need to distinguish whether it's of
+type AF_INET or AF_INET6. A pointer to a valid struct sockaddr,
+specified through ``IS`` or ``iS``, can be passed to this format specifier.
+
+The additional ``p``, ``f``, and ``s`` specifiers are used to specify port
+(IPv4, IPv6), flowinfo (IPv6) and scope (IPv6). Ports have a ``:`` prefix,
+flowinfo a ``/`` and scope a ``%``, each followed by the actual value.
+
+In case of an IPv6 address the compressed IPv6 address as described by
+http://tools.ietf.org/html/rfc5952 is being used if the additional
+specifier ``c`` is given. The IPv6 address is surrounded by ``[``, ``]`` in
+case of additional specifiers ``p``, ``f`` or ``s`` as suggested by
+https://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-07
+
+In case of IPv4 addresses, the additional ``h``, ``n``, ``b``, and ``l``
+specifiers can be used as well and are ignored in case of an IPv6
+address.
+
+Passed by reference.
+
+Further examples::
+
+	%pISfc		1.2.3.4		or [1:2:3:4:5:6:7:8]/123456789
+	%pISsc		1.2.3.4		or [1:2:3:4:5:6:7:8]%1234567890
+	%pISpfc		1.2.3.4:12345	or [1:2:3:4:5:6:7:8]:12345/123456789
+
+UUID/GUID addresses
+-------------------
+
+::
+
+	%pUb	00010203-0405-0607-0809-0a0b0c0d0e0f
+	%pUB	00010203-0405-0607-0809-0A0B0C0D0E0F
+	%pUl	03020100-0504-0706-0809-0a0b0c0e0e0f
+	%pUL	03020100-0504-0706-0809-0A0B0C0E0E0F
+
+For printing 16-byte UUID/GUIDs addresses. The additional ``l``, ``L``,
+``b`` and ``B`` specifiers are used to specify a little endian order in
+lower (l) or upper case (L) hex notation - and big endian order in lower (b)
+or upper case (B) hex notation.
+
+Where no additional specifiers are used the default big endian
+order with lower case hex notation will be printed.
+
+Passed by reference.
+
+dentry names
+------------
+
+::
+
+	%pd{,2,3,4}
+	%pD{,2,3,4}
+
+For printing dentry name; if we race with :c:func:`d_move`, the name might
+be a mix of old and new ones, but it won't oops.  %pd dentry is a safer
+equivalent of %s dentry->d_name.name we used to use, %pd<n> prints ``n``
+last components.  %pD does the same thing for struct file.
+
+Passed by reference.
+
+block_device names
+------------------
+
+::
+
+	%pg	sda, sda1 or loop0p1
+
+For printing name of block_device pointers.
+
+struct va_format
+----------------
+
+::
+
+	%pV
+
+For printing struct va_format structures. These contain a format string
+and va_list as follows::
+
+	struct va_format {
+		const char *fmt;
+		va_list *va;
+	};
+
+Implements a "recursive vsnprintf".
+
+Do not use this feature without some mechanism to verify the
+correctness of the format string and va_list arguments.
+
+Passed by reference.
+
+kobjects
+--------
+
+::
+
+	%pOF[fnpPcCF]
+
+
+For printing kobject based structs (device nodes). Default behaviour is
+equivalent to %pOFf.
+
+	- f - device node full_name
+	- n - device node name
+	- p - device node phandle
+	- P - device node path spec (name + @unit)
+	- F - device node flags
+	- c - major compatible string
+	- C - full compatible string
+
+The separator when using multiple arguments is ':'
+
+Examples::
+
+	%pOF	/foo/bar@0			- Node full name
+	%pOFf	/foo/bar@0			- Same as above
+	%pOFfp	/foo/bar@0:10			- Node full name + phandle
+	%pOFfcF	/foo/bar@0:foo,device:--P-	- Node full name +
+	                                          major compatible string +
+						  node flags
+							D - dynamic
+							d - detached
+							P - Populated
+							B - Populated bus
+
+Passed by reference.
+
+struct clk
+----------
+
+::
+
+	%pC	pll1
+	%pCn	pll1
+	%pCr	1560000000
+
+For printing struct clk structures. %pC and %pCn print the name
+(Common Clock Framework) or address (legacy clock framework) of the
+structure; %pCr prints the current clock rate.
+
+Passed by reference.
+
+bitmap and its derivatives such as cpumask and nodemask
+-------------------------------------------------------
+
+::
+
+	%*pb	0779
+	%*pbl	0,3-6,8-10
+
+For printing bitmap and its derivatives such as cpumask and nodemask,
+%*pb outputs the bitmap with field width as the number of bits and %*pbl
+output the bitmap as range list with field width as the number of bits.
+
+Passed by reference.
+
+Flags bitfields such as page flags, gfp_flags
+---------------------------------------------
+
+::
+
+	%pGp	referenced|uptodate|lru|active|private
+	%pGg	GFP_USER|GFP_DMA32|GFP_NOWARN
+	%pGv	read|exec|mayread|maywrite|mayexec|denywrite
+
+For printing flags bitfields as a collection of symbolic constants that
+would construct the value. The type of flags is given by the third
+character. Currently supported are [p]age flags, [v]ma_flags (both
+expect ``unsigned long *``) and [g]fp_flags (expects ``gfp_t *``). The flag
+names and print order depends on the particular	type.
+
+Note that this format should not be used directly in the
+:c:func:`TP_printk()` part of a tracepoint. Instead, use the show_*_flags()
+functions from <trace/events/mmflags.h>.
+
+Passed by reference.
+
+Network device features
+-----------------------
+
+::
+
+	%pNF	0x000000000000c000
+
+For printing netdev_features_t.
+
+Passed by reference.
+
+Thanks
+======
+
+If you add other %p extensions, please extend <lib/test_printf.c> with
+one or more test cases, if at all feasible.
+
+Thank you for your cooperation and attention.

Documentation/core-api/refcount-vs-atomic.rst

+===================================
+refcount_t API compared to atomic_t
+===================================
+
+.. contents:: :local:
+
+Introduction
+============
+
+The goal of refcount_t API is to provide a minimal API for implementing
+an object's reference counters. While a generic architecture-independent
+implementation from lib/refcount.c uses atomic operations underneath,
+there are a number of differences between some of the ``refcount_*()`` and
+``atomic_*()`` functions with regards to the memory ordering guarantees.
+This document outlines the differences and provides respective examples
+in order to help maintainers validate their code against the change in
+these memory ordering guarantees.
+
+The terms used through this document try to follow the formal LKMM defined in
+github.com/aparri/memory-model/blob/master/Documentation/explanation.txt
+
+memory-barriers.txt and atomic_t.txt provide more background to the
+memory ordering in general and for atomic operations specifically.
+
+Relevant types of memory ordering
+=================================
+
+.. note:: The following section only covers some of the memory
+   ordering types that are relevant for the atomics and reference
+   counters and used through this document. For a much broader picture
+   please consult memory-barriers.txt document.
+
+In the absence of any memory ordering guarantees (i.e. fully unordered)
+atomics & refcounters only provide atomicity and
+program order (po) relation (on the same CPU). It guarantees that
+each ``atomic_*()`` and ``refcount_*()`` operation is atomic and instructions
+are executed in program order on a single CPU.
+This is implemented using :c:func:`READ_ONCE`/:c:func:`WRITE_ONCE` and
+compare-and-swap primitives.
+
+A strong (full) memory ordering guarantees that all prior loads and
+stores (all po-earlier instructions) on the same CPU are completed
+before any po-later instruction is executed on the same CPU.
+It also guarantees that all po-earlier stores on the same CPU
+and all propagated stores from other CPUs must propagate to all
+other CPUs before any po-later instruction is executed on the original
+CPU (A-cumulative property). This is implemented using :c:func:`smp_mb`.
+
+A RELEASE memory ordering guarantees that all prior loads and
+stores (all po-earlier instructions) on the same CPU are completed
+before the operation. It also guarantees that all po-earlier
+stores on the same CPU and all propagated stores from other CPUs
+must propagate to all other CPUs before the release operation
+(A-cumulative property). This is implemented using
+:c:func:`smp_store_release`.
+
+A control dependency (on success) for refcounters guarantees that
+if a reference for an object was successfully obtained (reference
+counter increment or addition happened, function returned true),
+then further stores are ordered against this operation.
+Control dependency on stores are not implemented using any explicit
+barriers, but rely on CPU not to speculate on stores. This is only
+a single CPU relation and provides no guarantees for other CPUs.
+
+
+Comparison of functions
+=======================
+
+case 1) - non-"Read/Modify/Write" (RMW) ops
+-------------------------------------------
+
+Function changes:
+
+ * :c:func:`atomic_set` --> :c:func:`refcount_set`
+ * :c:func:`atomic_read` --> :c:func:`refcount_read`
+
+Memory ordering guarantee changes:
+
+ * none (both fully unordered)
+
+
+case 2) - increment-based ops that return no value
+--------------------------------------------------
+
+Function changes:
+
+ * :c:func:`atomic_inc` --> :c:func:`refcount_inc`
+ * :c:func:`atomic_add` --> :c:func:`refcount_add`
+
+Memory ordering guarantee changes:
+
+ * none (both fully unordered)
+
+case 3) - decrement-based RMW ops that return no value
+------------------------------------------------------
+
+Function changes:
+
+ * :c:func:`atomic_dec` --> :c:func:`refcount_dec`
+
+Memory ordering guarantee changes:
+
+ * fully unordered --> RELEASE ordering
+
+
+case 4) - increment-based RMW ops that return a value
+-----------------------------------------------------
+
+Function changes:
+
+ * :c:func:`atomic_inc_not_zero` --> :c:func:`refcount_inc_not_zero`
+ * no atomic counterpart --> :c:func:`refcount_add_not_zero`
+
+Memory ordering guarantees changes:
+
+ * fully ordered --> control dependency on success for stores
+
+.. note:: We really assume here that necessary ordering is provided as a
+   result of obtaining pointer to the object!
+
+
+case 5) - decrement-based RMW ops that return a value
+-----------------------------------------------------
+
+Function changes:
+
+ * :c:func:`atomic_dec_and_test` --> :c:func:`refcount_dec_and_test`
+ * :c:func:`atomic_sub_and_test` --> :c:func:`refcount_sub_and_test`
+ * no atomic counterpart --> :c:func:`refcount_dec_if_one`
+ * ``atomic_add_unless(&var, -1, 1)`` --> ``refcount_dec_not_one(&var)``
+
+Memory ordering guarantees changes:
+
+ * fully ordered --> RELEASE ordering + control dependency
+
+.. note:: :c:func:`atomic_add_unless` only provides full order on success.
+
+
+case 6) - lock-based RMW
+------------------------
+
+Function changes:
+
+ * :c:func:`atomic_dec_and_lock` --> :c:func:`refcount_dec_and_lock`
+ * :c:func:`atomic_dec_and_mutex_lock` --> :c:func:`refcount_dec_and_mutex_lock`
+
+Memory ordering guarantees changes:
+
+ * fully ordered --> RELEASE ordering + control dependency + hold
+   :c:func:`spin_lock` on success

Documentation/cpu-freq/cpu-drivers.txt

@@ -291,3 +291,7 @@ For example:
 		/* Do something with pos */
 		pos->frequency = ...
 	}
+
+If you need to work with the position of pos within driver_freq_table,
+do not subtract the pointers, as it is quite costly. Instead, use the
+macros cpufreq_for_each_entry_idx() and cpufreq_for_each_valid_entry_idx().

Documentation/device-mapper/cache-policies.txt

@@ -60,7 +60,7 @@ Memory usage:
 The mq policy used a lot of memory; 88 bytes per cache block on a 64
 bit machine.
 
-smq uses 28bit indexes to implement it's data structures rather than
+smq uses 28bit indexes to implement its data structures rather than
 pointers.  It avoids storing an explicit hit count for each block.  It
 has a 'hotspot' queue, rather than a pre-cache, which uses a quarter of
 the entries (each hotspot block covers a larger area than a single
@@ -84,7 +84,7 @@ resulting in better promotion/demotion decisions.
 
 Adaptability:
 The mq policy maintained a hit count for each cache block.  For a
-different block to get promoted to the cache it's hit count has to
+different block to get promoted to the cache its hit count has to
 exceed the lowest currently in the cache.  This meant it could take a
 long time for the cache to adapt between varying IO patterns.
 

Documentation/device-mapper/cache.txt

@@ -59,7 +59,7 @@ Fixed block size
 The origin is divided up into blocks of a fixed size.  This block size
 is configurable when you first create the cache.  Typically we've been
 using block sizes of 256KB - 1024KB.  The block size must be between 64
-(32KB) and 2097152 (1GB) and a multiple of 64 (32KB).
+sectors (32KB) and 2097152 sectors (1GB) and a multiple of 64 sectors (32KB).
 
 Having a fixed block size simplifies the target a lot.  But it is
 something of a compromise.  For instance, a small part of a block may be
@@ -119,7 +119,7 @@ doing here to avoid migrating during those peak io moments.
 
 For the time being, a message "migration_threshold <#sectors>"
 can be used to set the maximum number of sectors being migrated,
-the default being 204800 sectors (or 100MB).
+the default being 2048 sectors (1MB).
 
 Updating on-disk metadata
 -------------------------
@@ -143,11 +143,6 @@ the policy how big this chunk is, but it should be kept small.  Like the
 dirty flags this data is lost if there's a crash so a safe fallback
 value should always be possible.
 
-For instance, the 'mq' policy, which is currently the default policy,
-uses this facility to store the hit count of the cache blocks.  If
-there's a crash this information will be lost, which means the cache
-may be less efficient until those hit counts are regenerated.
-
 Policy hints affect performance, not correctness.
 
 Policy messaging

Documentation/device-mapper/dm-raid.txt

@@ -343,5 +343,8 @@ Version History
 1.11.0  Fix table line argument order
 	(wrong raid10_copies/raid10_format sequence)
 1.11.1  Add raid4/5/6 journal write-back support via journal_mode option
-1.12.1  fix for MD deadlock between mddev_suspend() and md_write_start() available
+1.12.1  Fix for MD deadlock between mddev_suspend() and md_write_start() available
 1.13.0  Fix dev_health status at end of "recover" (was 'a', now 'A')
+1.13.1  Fix deadlock caused by early md_stop_writes().  Also fix size an
+	state races.
+1.13.2  Fix raid redundancy validation and avoid keeping raid set frozen

Documentation/device-mapper/snapshot.txt

@@ -49,6 +49,10 @@ The difference between persistent and transient is with transient
 snapshots less metadata must be saved on disk - they can be kept in
 memory by the kernel.
 
+When loading or unloading the snapshot target, the corresponding
+snapshot-origin or snapshot-merge target must be suspended. A failure to
+suspend the origin target could result in data corruption.
+
 
 * snapshot-merge <origin> <COW device> <persistent> <chunksize>
 

Documentation/device-mapper/thin-provisioning.txt

@@ -112,9 +112,11 @@ $low_water_mark is expressed in blocks of size $data_block_size.  If
 free space on the data device drops below this level then a dm event
 will be triggered which a userspace daemon should catch allowing it to
 extend the pool device.  Only one such event will be sent.
-Resuming a device with a new table itself triggers an event so the
-userspace daemon can use this to detect a situation where a new table
-already exceeds the threshold.
+
+No special event is triggered if a just resumed device's free space is below
+the low water mark. However, resuming a device always triggers an
+event; a userspace daemon should verify that free space exceeds the low
+water mark when handling this event.
 
 A low water mark for the metadata device is maintained in the kernel and
 will trigger a dm event if free space on the metadata device drops below
@@ -274,7 +276,8 @@ ii) Status
 
     <transaction id> <used metadata blocks>/<total metadata blocks>
     <used data blocks>/<total data blocks> <held metadata root>
-    [no_]discard_passdown ro|rw
+    ro|rw|out_of_data_space [no_]discard_passdown [error|queue]_if_no_space
+    needs_check|-
 
     transaction id:
 	A 64-bit number used by userspace to help synchronise with metadata
@@ -394,3 +397,6 @@ ii) Status
 	If the pool has encountered device errors and failed, the status
 	will just contain the string 'Fail'.  The userspace recovery
 	tools should then be used.
+
+    In the case where <nr mapped sectors> is 0, there is no highest
+    mapped sector and the value of <highest mapped sector> is unspecified.

Documentation/device-mapper/unstriped.txt

+Introduction
+============
+
+The device-mapper "unstriped" target provides a transparent mechanism to
+unstripe a device-mapper "striped" target to access the underlying disks
+without having to touch the true backing block-device.  It can also be
+used to unstripe a hardware RAID-0 to access backing disks.
+
+Parameters:
+<number of stripes> <chunk size> <stripe #> <dev_path> <offset>
+
+<number of stripes>
+        The number of stripes in the RAID 0.
+
+<chunk size>
+	The amount of 512B sectors in the chunk striping.
+
+<dev_path>
+	The block device you wish to unstripe.
+
+<stripe #>
+        The stripe number within the device that corresponds to physical
+        drive you wish to unstripe.  This must be 0 indexed.
+
+
+Why use this module?
+====================
+
+An example of undoing an existing dm-stripe
+-------------------------------------------
+
+This small bash script will setup 4 loop devices and use the existing
+striped target to combine the 4 devices into one.  It then will use
+the unstriped target ontop of the striped device to access the
+individual backing loop devices.  We write data to the newly exposed
+unstriped devices and verify the data written matches the correct
+underlying device on the striped array.
+
+#!/bin/bash
+
+MEMBER_SIZE=$((128 * 1024 * 1024))
+NUM=4
+SEQ_END=$((${NUM}-1))
+CHUNK=256
+BS=4096
+
+RAID_SIZE=$((${MEMBER_SIZE}*${NUM}/512))
+DM_PARMS="0 ${RAID_SIZE} striped ${NUM} ${CHUNK}"
+COUNT=$((${MEMBER_SIZE} / ${BS}))
+
+for i in $(seq 0 ${SEQ_END}); do
+  dd if=/dev/zero of=member-${i} bs=${MEMBER_SIZE} count=1 oflag=direct
+  losetup /dev/loop${i} member-${i}
+  DM_PARMS+=" /dev/loop${i} 0"
+done
+
+echo $DM_PARMS | dmsetup create raid0
+for i in $(seq 0 ${SEQ_END}); do
+  echo "0 1 unstriped ${NUM} ${CHUNK} ${i} /dev/mapper/raid0 0" | dmsetup create set-${i}
+done;
+
+for i in $(seq 0 ${SEQ_END}); do
+  dd if=/dev/urandom of=/dev/mapper/set-${i} bs=${BS} count=${COUNT} oflag=direct
+  diff /dev/mapper/set-${i} member-${i}
+done;
+
+for i in $(seq 0 ${SEQ_END}); do
+  dmsetup remove set-${i}
+done
+
+dmsetup remove raid0
+
+for i in $(seq 0 ${SEQ_END}); do
+  losetup -d /dev/loop${i}
+  rm -f member-${i}
+done
+
+Another example
+---------------
+
+Intel NVMe drives contain two cores on the physical device.
+Each core of the drive has segregated access to its LBA range.
+The current LBA model has a RAID 0 128k chunk on each core, resulting
+in a 256k stripe across the two cores:
+
+   Core 0:       Core 1:
+  __________    __________
+  | LBA 512|    | LBA 768|
+  | LBA 0  |    | LBA 256|
+  ----------    ----------
+
+The purpose of this unstriping is to provide better QoS in noisy
+neighbor environments. When two partitions are created on the
+aggregate drive without this unstriping, reads on one partition
+can affect writes on another partition.  This is because the partitions
+are striped across the two cores.  When we unstripe this hardware RAID 0
+and make partitions on each new exposed device the two partitions are now
+physically separated.
+
+With the dm-unstriped target we're able to segregate an fio script that
+has read and write jobs that are independent of each other.  Compared to
+when we run the test on a combined drive with partitions, we were able
+to get a 92% reduction in read latency using this device mapper target.
+
+
+Example dmsetup usage
+=====================
+
+unstriped ontop of Intel NVMe device that has 2 cores
+-----------------------------------------------------
+dmsetup create nvmset0 --table '0 512 unstriped 2 256 0 /dev/nvme0n1 0'
+dmsetup create nvmset1 --table '0 512 unstriped 2 256 1 /dev/nvme0n1 0'
+
+There will now be two devices that expose Intel NVMe core 0 and 1
+respectively:
+/dev/mapper/nvmset0
+/dev/mapper/nvmset1
+
+unstriped ontop of striped with 4 drives using 128K chunk size
+--------------------------------------------------------------
+dmsetup create raid_disk0 --table '0 512 unstriped 4 256 0 /dev/mapper/striped 0'
+dmsetup create raid_disk1 --table '0 512 unstriped 4 256 1 /dev/mapper/striped 0'
+dmsetup create raid_disk2 --table '0 512 unstriped 4 256 2 /dev/mapper/striped 0'
+dmsetup create raid_disk3 --table '0 512 unstriped 4 256 3 /dev/mapper/striped 0'

Documentation/devicetree/bindings/arm/actions.txt

@@ -21,10 +21,26 @@ Boards:
 
 Root node property compatible must contain, depending on board:
 
+ - Allo.com Sparky: "allo,sparky"
  - Cubietech CubieBoard6: "cubietech,cubieboard6"
  - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar"
 
 
+S700 SoC
+========
+
+Required root node properties:
+
+- compatible :  must contain "actions,s700"
+
+
+Boards:
+
+Root node property compatible must contain, depending on board:
+
+ - Cubietech CubieBoard7: "cubietech,cubieboard7"
+
+
 S900 SoC
 ========
 

Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt

+* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
+
+ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores
+with a shared L3 memory system, control logic and external interfaces to
+form a multicore cluster. The PMU enables to gather various statistics on
+the operations of the DSU. The PMU provides independent 32bit counters that
+can count any of the supported events, along with a 64bit cycle counter.
+The PMU is accessed via CPU system registers and has no MMIO component.
+
+** DSU PMU required properties:
+
+- compatible	: should be one of :
+
+		"arm,dsu-pmu"
+
+- interrupts	: Exactly 1 SPI must be listed.
+
+- cpus		: List of phandles for the CPUs connected to this DSU instance.
+
+
+** Example:
+
+dsu-pmu-0 {
+	compatible = "arm,dsu-pmu";
+	interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>;
+	cpus = <&cpu_0>, <&cpu_1>;
+};

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -90,38 +90,6 @@ System Timer (ST) required properties:
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
-TC/TCLIB Timer required properties:
-- compatible: Should be "atmel,<chip>-tcb".
-  <chip> can be "at91rm9200" or "at91sam9x5"
-- reg: Should contain registers location and length
-- interrupts: Should contain all interrupts for the TC block
-  Note that you can specify several interrupt cells if the TC
-  block has one interrupt per channel.
-- clock-names: tuple listing input clock names.
-	Required elements: "t0_clk", "slow_clk"
-	Optional elements: "t1_clk", "t2_clk"
-- clocks: phandles to input clocks.
-
-Examples:
-
-One interrupt per TC block:
-	tcb0: timer@fff7c000 {
-		compatible = "atmel,at91rm9200-tcb";
-		reg = <0xfff7c000 0x100>;
-		interrupts = <18 4>;
-		clocks = <&tcb0_clk>;
-		clock-names = "t0_clk";
-	};
-
-One interrupt per TC channel in a TC block:
-	tcb1: timer@fffdc000 {
-		compatible = "atmel,at91rm9200-tcb";
-		reg = <0xfffdc000 0x100>;
-		interrupts = <26 4 27 4 28 4>;
-		clocks = <&tcb1_clk>;
-		clock-names = "t0_clk";
-	};
-
 RSTC Reset Controller required properties:
 - compatible: Should be "atmel,<chip>-rstc".
   <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"

Documentation/devicetree/bindings/arm/axentia.txt

@@ -10,6 +10,15 @@ compatible = "axentia,linea",
 and following the rules from atmel-at91.txt for a sama5d31 SoC.
 
 
+Nattis v2 board with Natte v2 power board
+-----------------------------------------
+
+Required root node properties:
+compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+	     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+and following the rules from above for the axentia,linea CPU module.
+
+
 TSE-850 v3 board
 ----------------
 

Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt

@@ -17,21 +17,23 @@ Further, syscon nodes that map platform-specific registers used for general
 system control is required:
 
     - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
-    - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-cpu-biu-ctrl",
+		  "brcm,brcmstb-cpu-biu-ctrl",
+		  "syscon"
     - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
 
-hif-cpubiuctrl node
+cpu-biu-ctrl node
 -------------------
-SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit
-(BIU) block which controls and interfaces the CPU complex to the different
-Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block
-offers a feature called Write Pairing which consists in collapsing two adjacent
-cache lines into a single (bursted) write transaction towards the memory
-controller (MEMC) to maximize write bandwidth.
+SoCs with Broadcom Brahma15 ARM-based and Brahma53 ARM64-based CPUs have a
+specific Bus Interface Unit (BIU) block which controls and interfaces the CPU
+complex to the different Memory Controller Ports (MCP), one per memory
+controller (MEMC). This BIU block offers a feature called Write Pairing which
+consists in collapsing two adjacent cache lines into a single (bursted) write
+transaction towards the memory controller (MEMC) to maximize write bandwidth.
 
 Required properties:
 
-    - compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon"
+    - compatible: must be "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon"
 
 Optional properties:
 
@@ -52,7 +54,7 @@ example:
         };
 
         hif_cpubiuctrl: syscon@3e2400 {
-            compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+            compatible = "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon";
             reg = <0x3e2400 0x5b4>;
             brcm,write-pairing;
         };

Documentation/devicetree/bindings/arm/cpus.txt

@@ -169,6 +169,7 @@ described below.
 			    "arm,cortex-r5"
 			    "arm,cortex-r7"
 			    "brcm,brahma-b15"
+			    "brcm,brahma-b53"
 			    "brcm,vulcan"
 			    "cavium,thunder"
 			    "cavium,thunder2"

Documentation/devicetree/bindings/arm/firmware/sdei.txt

+* Software Delegated Exception Interface (SDEI)
+
+Firmware implementing the SDEI functions described in ARM document number
+ARM DEN 0054A ("Software Delegated Exception Interface") can be used by
+Linux to receive notification of events such as those generated by
+firmware-first error handling, or from an IRQ that has been promoted to
+a firmware-assisted NMI.
+
+The interface provides a number of API functions for registering callbacks
+and enabling/disabling events. Functions are invoked by trapping to the
+privilege level of the SDEI firmware (specified as part of the binding
+below) and passing arguments in a manner specified by the "SMC Calling
+Convention (ARM DEN 0028B):
+
+	 r0		=> 32-bit Function ID / return value
+	{r1 - r3}	=> Parameters
+
+Note that the immediate field of the trapping instruction must be set
+to #0.
+
+The SDEI_EVENT_REGISTER function registers a callback in the kernel
+text to handle the specified event number.
+
+The sdei node should be a child node of '/firmware' and have required
+properties:
+
+ - compatible    : should contain:
+	* "arm,sdei-1.0" : For implementations complying to SDEI version 1.x.
+
+ - method        : The method of calling the SDEI firmware. Permitted
+                   values are:
+	* "smc" : SMC #0, with the register assignments specified in this
+	          binding.
+	* "hvc" : HVC #0, with the register assignments specified in this
+	          binding.
+Example:
+	firmware {
+		sdei {
+			compatible	= "arm,sdei-1.0";
+			method		= "smc";
+		};
+	};

Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt

@@ -14,3 +14,22 @@ following property before the previous one:
 Example:
 
 compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
+
+
+Power management
+----------------
+
+For power management (particularly DVFS and AVS), the North Bridge
+Power Management component is needed:
+
+Required properties:
+- compatible     : should contain "marvell,armada-3700-nb-pm", "syscon";
+- reg            : the register start and length for the North Bridge
+		    Power Management
+
+Example:
+
+nb_pm: syscon@14000 {
+	compatible = "marvell,armada-3700-nb-pm", "syscon";
+	reg = <0x14000 0x60>;
+}

Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt

@@ -20,4 +20,5 @@ ethsys: clock-controller@1b000000 {
 	compatible = "mediatek,mt2701-ethsys", "syscon";
 	reg = <0 0x1b000000 0 0x1000>;
 	#clock-cells = <1>;
+	#reset-cells = <1>;
 };

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -55,7 +55,7 @@ Note: child nodes can be added for auto probing from device tree.
 
 Example: adding device info in dtsi file
 
-adc: adc@12D10000 {
+adc: adc@12d10000 {
 	compatible = "samsung,exynos-adc-v1";
 	reg = <0x12D10000 0x100>;
 	interrupts = <0 106 0>;
@@ -71,7 +71,7 @@ adc: adc@12D10000 {
 
 Example: adding device info in dtsi file for Exynos3250 with additional sclk
 
-adc: adc@126C0000 {
+adc: adc@126c0000 {
 	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
 	reg = <0x126C0000 0x100>;
 	interrupts = <0 137 0>;
@@ -87,7 +87,7 @@ adc: adc@126C0000 {
 
 Example: Adding child nodes in dts file
 
-adc@12D10000 {
+adc@12d10000 {
 
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {

Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt

@@ -72,7 +72,7 @@ Optional nodes:
         - compatible: only "samsung,secure-firmware" is currently supported
         - reg: address of non-secure SYSRAM used for communication with firmware
 
-	firmware@203F000 {
+	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x0203F000 0x1000>;
 	};

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -104,12 +104,16 @@ Boards:
     compatible = "renesas,salvator-x", "renesas,r8a7796"
   - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
     compatible = "renesas,salvator-xs", "renesas,r8a7795"
+  - Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
+    compatible = "renesas,salvator-xs", "renesas,r8a7796"
   - SILK (RTP0RC7794LCB00011S)
     compatible = "renesas,silk", "renesas,r8a7794"
   - SK-RZG1E (YR8A77450S000BE)
     compatible = "renesas,sk-rzg1e", "renesas,r8a7745"
   - SK-RZG1M (YR8A77430S000BE)
     compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
+  - V3MSK
+    compatible = "renesas,v3msk", "renesas,r8a77970"
   - Wheat
     compatible = "renesas,wheat", "renesas,r8a7792"
 

Documentation/devicetree/bindings/arm/stm32.txt

+STMicroelectronics STM32 Platforms Device Tree Bindings
+
+Each device tree must specify which STM32 SoC it uses,
+using one of the following compatible strings:
+
+  st,stm32f429
+  st,stm32f469
+  st,stm32f746
+  st,stm32h743

Documentation/devicetree/bindings/arm/technologic.txt

 Technologic Systems Platforms Device Tree Bindings
 --------------------------------------------------
 
+TS-4600 is a System-on-Module based on the Freescale i.MX28 System-on-Chip.
+It can be mounted on a carrier board providing additional peripheral connectors.
+Required root node properties:
+	- compatible = "technologic,imx28-ts4600", "fsl,imx28"
+
 TS-4800 board
 Required root node properties:
 	- compatible = "technologic,imx51-ts4800", "fsl,imx51";
@@ -10,3 +15,9 @@ It can be mounted on a carrier board providing additional peripheral connectors.
 Required root node properties:
 	- compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl"
 	- compatible = "technologic,imx6q-ts4900", "fsl,imx6q"
+
+TS-7970 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
+It can be mounted on a carrier board providing additional peripheral connectors.
+Required root node properties:
+	- compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl"
+	- compatible = "technologic,imx6q-ts7970", "fsl,imx6q"

Documentation/devicetree/bindings/bus/ti-sysc.txt

@@ -19,6 +19,7 @@ Required standard properties:
 
 - compatible	shall be one of the following generic types:
 
+		"ti,sysc"
 		"ti,sysc-omap2"
 		"ti,sysc-omap4"
 		"ti,sysc-omap4-simple"
@@ -26,6 +27,8 @@ Required standard properties:
 		or one of the following derivative types for hardware
 		needing special workarounds:
 
+		"ti,sysc-omap2-timer"
+		"ti,sysc-omap4-timer"
 		"ti,sysc-omap3430-sr"
 		"ti,sysc-omap3630-sr"
 		"ti,sysc-omap4-sr"
@@ -49,6 +52,26 @@ Required standard properties:
 
 Optional properties:
 
+- ti,sysc-mask	shall contain mask of supported register bits for the
+		SYSCONFIG register as documented in the Technical Reference
+		Manual (TRM) for the interconnect target module
+
+- ti,sysc-midle	list of master idle modes supported by the interconnect
+		target module as documented in the TRM for SYSCONFIG
+		register MIDLEMODE bits
+
+- ti,sysc-sidle	list of slave idle modes supported by the interconnect
+		target module as documented in the TRM for SYSCONFIG
+		register SIDLEMODE bits
+
+- ti,sysc-delay-us	delay needed after OCP softreset before accssing
+			SYSCONFIG register again
+
+- ti,syss-mask	optional mask of reset done status bits as described in the
+		TRM for SYSSTATUS registers, typically 1 with some devices
+		having separate reset done bits for children like OHCI and
+		EHCI
+
 - clocks	clock specifier for each name in the clock-names as
 		specified in the binding documentation for ti-clkctrl,
 		typically available for all interconnect targets on TI SoCs
@@ -61,6 +84,9 @@ Optional properties:
 - ti,hwmods	optional TI interconnect module name to use legacy
 		hwmod platform data
 
+- ti,no-reset-on-init	interconnect target module should not be reset at init
+
+- ti,no-idle-on-init	interconnect target module should not be idled at init
 
 Example: Single instance of MUSB controller on omap4 using interconnect ranges
 using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
@@ -74,6 +100,17 @@ using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
 		reg-names = "rev", "sysc", "syss";
 		clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
 		clock-names = "fck";
+		ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+				 SYSC_OMAP2_SOFTRESET |
+				 SYSC_OMAP2_AUTOIDLE)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>,
+				<SYSC_IDLE_SMART_WKUP>;
+		ti,syss-mask = <1>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x2b000 0x1000>;

Documentation/devicetree/bindings/chosen.txt

@@ -120,3 +120,18 @@ e.g.
 While this property does not represent a real hardware, the address
 and the size are expressed in #address-cells and #size-cells,
 respectively, of the root node.
+
+linux,initrd-start and linux,initrd-end
+---------------------------------------
+
+These properties hold the physical start and end address of an initrd that's
+loaded by the bootloader. Note that linux,initrd-start is inclusive, but
+linux,initrd-end is exclusive.
+e.g.
+
+/ {
+	chosen {
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+};

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

@@ -5,8 +5,11 @@ controllers within the SoC.
 
 Required Properties:
 
-- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
-	      or "amlogic,gxl-clkc" for GXL and GXM SoC.
+- compatible: should be:
+		"amlogic,gxbb-clkc" for GXBB SoC,
+		"amlogic,gxl-clkc" for GXL and GXM SoC,
+		"amlogic,axg-clkc" for AXG SoC.
+
 - reg: physical base address of the clock controller and length of memory
        mapped region.
 

Documentation/devicetree/bindings/clock/exynos3250-clock.txt

@@ -32,7 +32,7 @@ Example 1: Examples of clock controller nodes are listed below.
 		#clock-cells = <1>;
 	};
 
-	cmu_dmc: clock-controller@105C0000 {
+	cmu_dmc: clock-controller@105c0000 {
 		compatible = "samsung,exynos3250-cmu-dmc";
 		reg = <0x105C0000 0x2000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5260-clock.txt

@@ -180,7 +180,7 @@ Example 2: UART controller node that consumes the clock generated by the
 		peri clock controller. Refer to the standard clock bindings for
 		information about 'clocks' and 'clock-names' property.
 
-	serial@12C00000 {
+	serial@12c00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 146 0>;

Documentation/devicetree/bindings/clock/exynos5410-clock.txt

@@ -41,7 +41,7 @@ Example 2: UART controller node that consumes the clock generated by the clock
 	   controller. Refer to the standard clock bindings for information
 	   about 'clocks' and 'clock-names' property.
 
-	serial@12C20000 {
+	serial@12c20000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 51 0>;

Documentation/devicetree/bindings/clock/exynos5433-clock.txt

@@ -472,7 +472,7 @@ Example 2: Examples of clock controller nodes are listed below.
 Example 3: UART controller node that consumes the clock generated by the clock
 	   controller.
 
-	serial_0: serial@14C10000 {
+	serial_0: serial@14c10000 {
 		compatible = "samsung,exynos5433-uart";
 		reg = <0x14C10000 0x100>;
 		interrupts = <0 421 0>;

Documentation/devicetree/bindings/clock/hi3660-clock.txt

@@ -13,12 +13,18 @@ Required Properties:
 	- "hisilicon,hi3660-pmuctrl"
 	- "hisilicon,hi3660-sctrl"
 	- "hisilicon,hi3660-iomcu"
+	- "hisilicon,hi3660-stub-clk"
 
 - reg: physical base address of the controller and length of memory mapped
   region.
 
 - #clock-cells: should be 1.
 
+Optional Properties:
+
+- mboxes: Phandle to the mailbox for sending message to MCU.
+            (See: ../mailbox/hisilicon,hi3660-mailbox.txt for more info)
+
 Each clock is assigned an identifier and client nodes use this identifier
 to specify the clock which they consume.
 

Documentation/devicetree/bindings/clock/qcom,a53pll.txt

+Qualcomm MSM8916 A53 PLL Binding
+--------------------------------
+The A53 PLL on MSM8916 platforms is the main CPU PLL used used for frequencies
+above 1GHz.
+
+Required properties :
+- compatible : Shall contain only one of the following:
+
+		"qcom,msm8916-a53pll"
+
+- reg : shall contain base register location and length
+
+- #clock-cells : must be set to <0>
+
+Example:
+
+	a53pll: clock@b016000 {
+		compatible = "qcom,msm8916-a53pll";
+		reg = <0xb016000 0x40>;
+		#clock-cells = <0>;
+	};
+

Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt

+Qualcomm Technologies, Inc. SPMI PMIC clock divider (clkdiv)
+
+clkdiv configures the clock frequency of a set of outputs on the PMIC.
+These clocks are typically wired through alternate functions on
+gpio pins.
+
+=======================
+Properties
+=======================
+
+- compatible
+	Usage:      required
+	Value type: <string>
+	Definition: must be "qcom,spmi-clkdiv".
+
+- reg
+	Usage:      required
+	Value type: <prop-encoded-array>
+	Definition: base address of CLKDIV peripherals.
+
+- qcom,num-clkdivs
+	Usage:      required
+	Value type: <u32>
+	Definition: number of CLKDIV peripherals.
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the xo clock.
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "xo".
+
+- #clock-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: shall contain 1.
+
+=======
+Example
+=======
+
+pm8998_clk_divs: clock-controller@5b00 {
+	compatible = "qcom,spmi-clkdiv";
+	reg = <0x5b00>;
+	#clock-cells = <1>;
+	qcom,num-clkdivs = <3>;
+	clocks = <&xo_board>;
+	clock-names = "xo";
+
+	assigned-clocks = <&pm8998_clk_divs 1>,
+			  <&pm8998_clk_divs 2>,
+			  <&pm8998_clk_divs 3>;
+	assigned-clock-rates = <9600000>,
+			       <9600000>,
+			       <9600000>;
+};

Documentation/devicetree/bindings/clock/qoriq-clock.txt

@@ -78,6 +78,7 @@ second cell is the clock index for the specified type.
 	2	hwaccel		index (n in CLKCGnHWACSR)
 	3	fman		0 for fm1, 1 for fm2
 	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
+				4=pll/5, 5=pll/6, 6=pll/7, 7=pll/8
 	5	coreclk		must be 0
 
 3. Example

Documentation/devicetree/bindings/clock/silabs,si5351.txt

@@ -49,6 +49,7 @@ Optional child node properties:
 - silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
   divider.
 - silabs,pll-master: boolean, multisynth can change pll frequency.
+- silabs,pll-reset: boolean, clock output can reset its pll.
 - silabs,disable-state : clock output disable state, shall be
   0 = clock output is driven LOW when disabled
   1 = clock output is driven HIGH when disabled

Documentation/devicetree/bindings/clock/sprd.txt

+Spreadtrum Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+	- "sprd,sc9860-pmu-gate"
+	- "sprd,sc9860-pll"
+	- "sprd,sc9860-ap-clk"
+	- "sprd,sc9860-aon-prediv"
+	- "sprd,sc9860-apahb-gate"
+	- "sprd,sc9860-aon-gate"
+	- "sprd,sc9860-aonsecure-clk"
+	- "sprd,sc9860-agcp-gate"
+	- "sprd,sc9860-gpu-clk"
+	- "sprd,sc9860-vsp-clk"
+	- "sprd,sc9860-vsp-gate"
+	- "sprd,sc9860-cam-clk"
+	- "sprd,sc9860-cam-gate"
+	- "sprd,sc9860-disp-clk"
+	- "sprd,sc9860-disp-gate"
+	- "sprd,sc9860-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+	   property here just simply shows which clock group the clocks'
+	   parents are in, since each clk node would represent many clocks
+	   which are defined in the driver.  The detailed dependency
+	   relationship (i.e. how many parents and which are the parents)
+	   are implemented in driver code.
+
+Optional properties:
+
+- reg:	Contain the registers base address and length. It must be configured
+	only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+	       the clock, and so we can get regmap for the clocks from the
+	       syscon device.
+
+Example:
+
+	pmu_gate: pmu-gate {
+		compatible = "sprd,sc9860-pmu-gate";
+		sprd,syscon = <&pmu_regs>;
+		clocks = <&ext_26m>;
+		#clock-cells = <1>;
+	};
+
+	pll: pll {
+		compatible = "sprd,sc9860-pll";
+		sprd,syscon = <&ana_regs>;
+		clocks = <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
+
+	ap_clk: clock-controller@20000000 {
+		compatible = "sprd,sc9860-ap-clk";
+		reg = <0 0x20000000 0 0x400>;
+		clocks = <&ext_26m>, <&pll 0>,
+			 <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};

Documentation/devicetree/bindings/clock/sun8i-de2.txt

@@ -4,13 +4,14 @@ Allwinner Display Engine 2.0 Clock Control Binding
 Required properties :
 - compatible: must contain one of the following compatibles:
 		- "allwinner,sun8i-a83t-de2-clk"
+		- "allwinner,sun8i-h3-de2-clk"
 		- "allwinner,sun8i-v3s-de2-clk"
 		- "allwinner,sun50i-h5-de2-clk"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the clocks feeding the display engine subsystem.
 	  Three are needed:
-  - "mod": the display engine module clock
+  - "mod": the display engine module clock (on A83T it's the DE PLL)
   - "bus": the bus clock for the whole display engine subsystem
 - clock-names: Must contain the clock names described just above
 - resets: phandle to the reset control for the display engine subsystem.
@@ -19,7 +20,7 @@ Required properties :
 
 Example:
 de2_clocks: clock@1000000 {
-	compatible = "allwinner,sun8i-a83t-de2-clk";
+	compatible = "allwinner,sun8i-h3-de2-clk";
 	reg = <0x01000000 0x100000>;
 	clocks = <&ccu CLK_BUS_DE>,
 		 <&ccu CLK_DE>;

Documentation/devicetree/bindings/crypto/arm-cryptocell.txt

+Arm TrustZone CryptoCell cryptographic engine
+
+Required properties:
+- compatible: Should be "arm,cryptocell-712-ree".
+- reg: Base physical address of the engine and length of memory mapped region.
+- interrupts: Interrupt number for the device.
+
+Optional properties:
+- interrupt-parent: The phandle for the interrupt controller that services
+  interrupts for this device.
+- clocks: Reference to the crypto engine clock.
+- dma-coherent: Present if dma operations are coherent.
+
+Examples:
+
+       arm_cc712: crypto@80000000 {
+               compatible = "arm,cryptocell-712-ree";
+               interrupt-parent = <&intc>;
+               interrupts = < 0 30 4 >;
+               reg = < 0x80000000 0x10000 >;
+
+       };

Documentation/devicetree/bindings/crypto/atmel-crypto.txt

@@ -75,7 +75,7 @@ Required properties:
 - clock-frequency: must be present in the i2c controller node.
 
 Example:
-atecc508a@C0 {
+atecc508a@c0 {
 	compatible = "atmel,atecc508a";
 	reg = <0xC0>;
 };

Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt

 Inside Secure SafeXcel cryptographic engine
 
 Required properties:
-- compatible: Should be "inside-secure,safexcel-eip197".
+- compatible: Should be "inside-secure,safexcel-eip197" or
+              "inside-secure,safexcel-eip97".
 - reg: Base physical address of the engine and length of memory mapped region.
 - interrupts: Interrupt numbers for the rings and engine.
 - interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem".

Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt

@@ -2,7 +2,9 @@ Exynos Pseudo Random Number Generator
 
 Required properties:
 
-- compatible  : Should be "samsung,exynos4-rng".
+- compatible  : One of:
+                - "samsung,exynos4-rng" for Exynos4210 and Exynos4412
+                - "samsung,exynos5250-prng" for Exynos5250+
 - reg         : Specifies base physical address and size of the registers map.
 - clocks      : Phandle to clock-controller plus clock-specifier pair.
 - clock-names : "secss" as a clock name.

Documentation/devicetree/bindings/crypto/st,stm32-cryp.txt

+* STMicroelectronics STM32 CRYP
+
+Required properties:
+- compatible: Should be "st,stm32f756-cryp".
+- reg: The address and length of the peripheral registers space
+- clocks: The input clock of the CRYP instance
+- interrupts: The CRYP interrupt
+
+Optional properties:
+- resets: The input reset of the CRYP instance
+
+Example:
+crypto@50060000 {
+	compatible = "st,stm32f756-cryp";
+	reg = <0x50060000 0x400>;
+	interrupts = <79>;
+	clocks = <&rcc 0 STM32F7_AHB2_CLOCK(CRYP)>;
+	resets = <&rcc STM32F7_AHB2_RESET(CRYP)>;
+};

Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt

@@ -20,7 +20,7 @@ Optional properties:
 
 Example : NoC Probe nodes in Device Tree are listed below.
 
-	nocp_mem0_0: nocp@10CA1000 {
+	nocp_mem0_0: nocp@10ca1000 {
 		compatible = "samsung,exynos5420-nocp";
 		reg = <0x10CA1000 0x200>;
 	};

Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

-THS8135 Video DAC
------------------
-
-This is the binding for Texas Instruments THS8135 Video DAC bridge.
-
-Required properties:
-
-- compatible: Must be "ti,ths8135"
-
-Required nodes:
-
-This device has two video ports. Their connections are modelled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for RGB input
-- Video port 1 for VGA output
-
-Example
--------
-
-vga-bridge {
-	compatible = "ti,ths8135";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			vga_bridge_in: endpoint {
-				remote-endpoint = <&lcdc_out_vga>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			vga_bridge_out: endpoint {
-				remote-endpoint = <&vga_con_in>;
-			};
-		};
-	};
-};

Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt

+THS8134 and THS8135 Video DAC
+-----------------------------
+
+This is the binding for Texas Instruments THS8134, THS8134A, THS8134B and
+THS8135 Video DAC bridges.
+
+Required properties:
+
+- compatible: Must be one of
+  "ti,ths8134"
+  "ti,ths8134a," "ti,ths8134"
+  "ti,ths8134b", "ti,ths8134"
+  "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+	compatible = "ti,ths8135";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vga_bridge_in: endpoint {
+				remote-endpoint = <&lcdc_out_vga>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			vga_bridge_out: endpoint {
+				remote-endpoint = <&vga_con_in>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

@@ -54,7 +54,7 @@ Video interfaces:
 
 Example:
 
-	dsi@11C80000 {
+	dsi@11c80000 {
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
 		interrupts = <0 79 0>;

Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt

+ARM Versatile TFT Panels
+
+These panels are connected to the daughterboards found on the
+ARM Versatile reference designs.
+
+This device node must appear as a child to a "syscon"-compatible
+node.
+
+Required properties:
+- compatible: should be "arm,versatile-tft-panel"
+
+Required subnodes:
+- port: see display/panel/panel-common.txt, graph.txt
+
+
+Example:
+
+sysreg@0 {
+	compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+	reg = <0x00000 0x1000>;
+
+	panel: display@0 {
+		compatible = "arm,versatile-tft-panel";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&foo>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.txt

+Solomon Goldentek Display GKTW70SDAE4SE LVDS Display Panel
+==========================================================
+
+The GKTW70SDAE4SE is a 7" WVGA TFT-LCD display panel.
+
+These DT bindings follow the LVDS panel bindings defined in panel-lvds.txt
+with the following device-specific properties.
+
+Required properties:
+
+- compatible: Shall contain "sgd,gktw70sdae4se" and "panel-lvds", in that order.
+
+Example
+-------
+
+panel {
+	compatible = "sgd,gktw70sdae4se", "panel-lvds";
+
+	width-mm = <153>;
+	height-mm = <86>;
+
+	data-mapping = "jeida-18";
+
+	panel-timing {
+		clock-frequency = <32000000>;
+		hactive = <800>;
+		vactive = <480>;
+		hback-porch = <39>;
+		hfront-porch = <39>;
+		vback-porch = <29>;
+		vfront-porch = <13>;
+		hsync-len = <47>;
+		vsync-len = <2>;
+	};
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds_encoder>;
+		};
+	};
+};

Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt

 Toshiba 8.9" WXGA (1280x768) TFT LCD panel
 
 Required properties:
-- compatible: should be "toshiba,lt089ac29000.txt"
+- compatible: should be "toshiba,lt089ac29000"
 - power-supply: as specified in the base binding
 
 This binding is compatible with the simple-panel binding, which is specified

Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt

+Rockchip RK3399 specific extensions to the cdn Display Port
+================================
+
+Required properties:
+- compatible: must be "rockchip,rk3399-cdn-dp"
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+
+- clock-names: from common clock binding:
+	       Required elements: "core-clk" "pclk" "spdif" "grf"
+
+- resets : a list of phandle + reset specifier pairs
+- reset-names : string of reset names
+		Required elements: "apb", "core", "dptx", "spdif"
+- power-domains : power-domain property defined with a phandle
+		  to respective power domain.
+- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
+- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port nodes with endpoint definitions as defined in
+	 Documentation/devicetree/bindings/media/video-interfaces.txt.
+	 contained 2 endpoints, connecting to the output of vop.
+
+- phys: from general PHY binding: the phandle for the PHY device.
+
+- extcon: extcon specifier for the Power Delivery
+
+- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
+
+-------------------------------------------------------------------------------
+
+Example:
+	cdn_dp: dp@fec00000 {
+		compatible = "rockchip,rk3399-cdn-dp";
+		reg = <0x0 0xfec00000 0x0 0x100000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+		clock-names = "core-clk", "pclk", "spdif", "grf";
+		assigned-clocks = <&cru SCLK_DP_CORE>;
+		assigned-clock-rates = <100000000>;
+		power-domains = <&power RK3399_PD_HDCP>;
+		phys = <&tcphy0_dp>, <&tcphy1_dp>;
+		resets = <&cru SRST_DPTX_SPDIF_REC>;
+		reset-names = "spdif";
+		extcon = <&fusb0>, <&fusb1>;
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dp>;
+				};
+
+				dp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dp>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt

@@ -15,6 +15,10 @@ Required properties:
   "de_be1-lcd1"
   "de_be0-lcd0-hdmi"
   "de_be1-lcd1-hdmi"
+  "mixer0-lcd0"
+  "mixer0-lcd0-hdmi"
+  "mixer1-lcd1-hdmi"
+  "mixer1-lcd1-tve"
 
 Example:
 

Documentation/devicetree/bindings/display/st,stih4xx.txt

@@ -119,7 +119,7 @@ Example:
 / {
 	...
 
-	vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+	vtg_main_slave: sti-vtg-main-slave@fe85a800 {
 		compatible	= "st,vtg";
 		reg		= <0xfe85A800 0x300>;
 		interrupts	= <GIC_SPI 175 IRQ_TYPE_NONE>;

Documentation/devicetree/bindings/display/st,stm32-ltdc.txt

@@ -98,7 +98,7 @@ Example 2: DSI panel
 			compatible = "st,stm32-dsi";
 			reg = <0x40016c00 0x800>;
 			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
-			clock-names = "ref", "pclk";
+			clock-names = "pclk", "ref";
 			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
 			reset-names = "apb";
 

Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt

@@ -64,6 +64,52 @@ Required properties:
     first port should be the input endpoint. The second should be the
     output, usually to an HDMI connector.
 
+DWC HDMI TX Encoder
+-------------------
+
+The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with Allwinner's own PHY IP. It supports audio and video outputs and CEC.
+
+These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
+Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
+following device-specific properties.
+
+Required properties:
+
+  - compatible: value must be one of:
+    * "allwinner,sun8i-a83t-dw-hdmi"
+  - reg: base address and size of memory-mapped region
+  - reg-io-width: See dw_hdmi.txt. Shall be 1.
+  - interrupts: HDMI interrupt number
+  - clocks: phandles to the clocks feeding the HDMI encoder
+    * iahb: the HDMI bus clock
+    * isfr: the HDMI register clock
+    * tmds: TMDS clock
+  - clock-names: the clock names mentioned above
+  - resets: phandle to the reset controller
+  - reset-names: must be "ctrl"
+  - phys: phandle to the DWC HDMI PHY
+  - phy-names: must be "phy"
+
+  - ports: A ports node with endpoint definitions as defined in
+    Documentation/devicetree/bindings/media/video-interfaces.txt. The
+    first port should be the input endpoint. The second should be the
+    output, usually to an HDMI connector.
+
+DWC HDMI PHY
+------------
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun8i-a83t-hdmi-phy
+  - reg: base address and size of memory-mapped region
+  - clocks: phandles to the clocks feeding the HDMI PHY
+    * bus: the HDMI PHY interface clock
+    * mod: the HDMI PHY module clock
+  - clock-names: the clock names mentioned above
+  - resets: phandle to the reset controller driving the PHY
+  - reset-names: must be "phy"
+
 TV Encoder
 ----------
 
@@ -94,24 +140,26 @@ Required properties:
    * allwinner,sun7i-a20-tcon
    * allwinner,sun8i-a33-tcon
    * allwinner,sun8i-a83t-tcon-lcd
+   * allwinner,sun8i-a83t-tcon-tv
    * allwinner,sun8i-v3s-tcon
  - reg: base address and size of memory-mapped region
  - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the TCON. Three are needed:
+ - clocks: phandles to the clocks feeding the TCON.
    - 'ahb': the interface clocks
-   - 'tcon-ch0': The clock driving the TCON channel 0
+   - 'tcon-ch0': The clock driving the TCON channel 0, except for A83T TV TCON
  - resets: phandles to the reset controllers driving the encoder
    - "lcd": the reset line for the TCON channel 0
 
  - clock-names: the clock names mentioned above
  - reset-names: the reset names mentioned above
- - clock-output-names: Name of the pixel clock created
+ - clock-output-names: Name of the pixel clock created, if TCON supports
+   channel 0.
 
 - ports: A ports node with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
   first port should be the input endpoint, the second one the output
 
-  The output may have multiple endpoints. The TCON has two channels,
+  The output may have multiple endpoints. TCON can have 1 or 2 channels,
   usually with the first channel being used for the panels interfaces
   (RGB, LVDS, etc.), and the second being used for the outputs that
   require another controller (TV Encoder, HDMI, etc.). The endpoints
@@ -122,8 +170,8 @@ Required properties:
 On SoCs other than the A33 and V3s, there is one more clock required:
    - 'tcon-ch1': The clock driving the TCON channel 1
 
-On SoCs that support LVDS (all SoCs but the A13, H3, H5 and V3s), you
-need one more reset line:
+When TCON support LVDS (all TCONs except TV TCON on A83T and those found
+in A13, H3, H5 and V3s SoCs), you need one more reset line:
    - 'lvds': The reset line driving the LVDS logic
 
 And on the A23, A31, A31s and A33, you need one more clock line:
@@ -226,6 +274,7 @@ supported.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-a83t-de2-mixer-0
+    * allwinner,sun8i-a83t-de2-mixer-1
     * allwinner,sun8i-v3s-de2-mixer
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the mixer

Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt

@@ -47,8 +47,8 @@ When the OS is not in control of the management interface (i.e. it's a guest),
 the channel nodes appear on their own, not under a management node.
 
 Required properties:
-- compatible: must contain "qcom,hidma-1.0" for initial HW or "qcom,hidma-1.1"
-for MSI capable HW.
+- compatible: must contain "qcom,hidma-1.0" for initial HW or
+  "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW.
 - reg: Addresses for the transfer and event channel
 - interrupts: Should contain the event interrupt
 - desc-count: Number of asynchronous requests this channel can handle

Documentation/devicetree/bindings/dma/snps-dma.txt

@@ -64,6 +64,6 @@ Example:
 		reg = <0xe0000000 0x1000>;
 		interrupts = <0 35 0x4>;
 		dmas = <&dmahost 12 0 1>,
-			<&dmahost 13 0 1 0>;
+			<&dmahost 13 1 0>;
 		dma-names = "rx", "rx";
 	};

Documentation/devicetree/bindings/dma/ste-dma40.txt

@@ -15,7 +15,7 @@ Optional properties:
 
 Example:
 
-	dma: dma-controller@801C0000 {
+	dma: dma-controller@801c0000 {
 		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
 		reg = <0x801C0000 0x1000  0x40010000 0x800>;
 		reg-names = "base", "lcpa";